element in the queue of hot flashes

I try to empty element in my queue and save all items, it has been hours I'm working to find a way, but it does not work. no idea how to do?

the output of the flush is attached to this post


Tags: NI Software

Similar Questions

  • Prevent the structure elements of the queue of the event?

    Is there a way to prevent a record structure and the queues of the events of the event?

    I have a state machine with a structure of the event in one of the States - the State is waiting for user input before continuing - and I wish that the structure of the event to recognize the events only when the program is in this State. I understand that the current method to catch all events is sometimes (usually) the desired behavior... Heck, I use it to my advantage most of the time. However, this is not one of those times.

    Here is a small example of my configuration:

    (See attachment. I guess that's too big for an extract VI, so it is a standard PNG image)

    The question that I have, is that the Structure of the continuous event of events Records even after pass to the next State. This means that if 'String' is changed at any time, the next time the queue of event happens in the state machine, all updates of the "chain" will run.

    So, how can I implement the code in such a way so that the events will be only intercepted and queue when the structure of event loop is running?


  • Error to the element of the queue with simulated signal, but not with the DAQ hardware

    Hello.  I get an error code 1 when I run my VI in simulation mode, which is only 3 simulate subvis signal at different frequencies.  The block diagram shows jpg file and the probe is after I stop the VI.  Note that there is an invalid refnum.  I don't know why that is.  I am also including the watch of the probe after a few iterations, there is no error on the probe 64 until I stop the VI, and also noted that there have been no queue items.  This of course means that I don't get to remove the data in loop 2.  An interesting note is that the system works fine when I run the program in data acquisition mode, which is the other case behind the 'simulate signals. "  In this case, the only thing is the DAQ assistant and dynamic data of the tunnel cable.  Everyone can't see what I could do wrong?  Thank you.

    Thanks for looking at my post.  I thought about it about five minutes ago.  I didn't have a timeout on the handeler event, so it was not double check for new items in the queue.  I don't know yet why the probe shows showes that items have not put in the queue because they certainly were.  Maybe "queue items 0" means that there are no items saved in the queue. ?

    Your concern is interesting and deserves a check...  I just ran it without registration, and it seems that the release of the case (the default) record structure is just an empty DDT, a placeholder, I guess.

  • indicator light flashes, but there's no docs in the queue; Cannot print

    I have a Color LaserJet CP1025nw printer.  The 'ready' light has been constantly flashes throughout the day.  I can't print anything of any program.  It seems that when I try to print, everything goes smoothly, the doc still appears in the queue of print with the status "printing" but nothing no is displayed. So I canceled all documents pending, so that there is nothing in the queue, but always flashes. Flashing must indicate that the printer is receiving or processing data, but there is no docs in the queue.

    I tried to turn off the printer, wait 10 minutes and turn it back on again; also tried to restart the printer and the computer. also made sure all the cables were connected the printer to the computer; also tried opening and closing the upper part and he had to scroll through all the lights; also crossed the convenience store help and tried to print at a command prompt... nothing has worked so far.

    Help!

    SOLVED!

    Thanks to an old post here, I learned that I could try to do a hard reset.  SO I did a hard reset and the printer works now! Perhaps there was a doc stuck in the memory of the printer and it could not go beyond it?...

    For the hard reset, while the printer is turned on, unplug the power cord and cable, wait at least 30 seconds, and then plug them back in and turn on the printer.

  • initialize the queue

    I'm working on a state machine in queue configuration. I use a def type with all of my States possible in what elements of my queue. At the beginning of my program of the queue must initialize with a specific order, as shown in the snippet below. However, when I run the code and probe the queue at the end, I end up with 0 entries in my queue. Am I missing something? This is my first time with queues in labview.

    If you look at the queue on the wire that is a reference to the queue and not the queue itself.

    To test the use of the Get queue status VI application and probe them elements # in the queue output.

  • Writing in the spreadsheet with the queue

    Hello

    I am a beginner with queues and I have a few questions.  I have attached a simple example of code that I wrote to better implement a consumer who can queue data and write on a worksheet after running the code.

    First of all, I noticed that the queue still has residual remaining after the code ends.  It then writes this element to the file to run the vi.  I can't figure how to get rid of this element.

    Second, anyone have any suggestions to improve this code?  I've been playing with it for quite some time and I finally got to work like that, but it is certainly configured differently from the other examples I've seen.

    Thirdly, I am reading the number of items in the queue, but the two in the loop of the producer and the consumer, told me that there is no element.  How can this be?  My output file seems to work and I certainly put items in the queue.

    Finally, in the future I'll use data from the queue in two places.  Here I've implemented a notifier to do the job.  This is the best method?

    Thanks for your help!

    Jason

    The reason why you do not get the last element of the queue (at least not until you restart the VI) is that you have your automatic indexation tunnel that collects all the data to send to the writing on file SS service cable for moving to register.  So this last piece of data from the queue to get into the shift register, but it is not getting into the 2-D chart by the tunnel of automatic indexing up to the next iteration of the loop.  When you rerun the VI, as the shift register is not initialized, it is already there and became the first point of your next data execution.

    Why did you put the register shift in?  Just remove and just use the tunnel of automatic indexation.

    I don't know what you really want to do with the 2nd loop to say if the Notifier is correct or not.  But if you do not want to lose data in the other loop, then you need to use a second queue and have your producer loop enqueue data in the two queues, a queue for each consumer loop.

    With regard to the elements draws in the queue, seeing how your code is configured, the queue will almost always empty because the dequeue function will be ready to pull out the element immediately after the enqueue function puts in.  Unless you have your loop producer much faster than your consumer loop running, you will not see a build up of the elements.  (Try putting an expectation of more of 100 msec in your loop of consumer.  Then you will see elements accumulate in the queue.)

    I don't know why you put the spreadsheet feature writing after the loop.  Normal use for queues in an architecture of producer/consumer must transmit the data to a separate loop that contains the functions write file.  This way he can work at his own pace, but write the data and make sure that you do not lose it.  As you have now, if your code runs a long time, you may run out of memory when at the tunnel of automatic indexing table becomes too large.  And if your application crashes before you complete it with your stop button, then all data are lost because you did not it writes the file.

  • effectiveness of the queue

    So, I'm working on improving the efficiency and speed of my system of producer-consumer. I have two producers and a consumer (which, among other things, writes files to disk). I currently have two producers supplying the a queue which is then processed by my currently single consumer. Each item in the queue is a grouping of several types of data and contains everything you need to "consume." There are some cases where more complex queue items placed which take longer to treat and slow the process of consumption. I add a second consumer loop to run in parallel with the first to take the weight off the loop so to speak. My question is, it would be more effective to have both made consumers in the same queue, or would it be more effective to have each producer to feed its own queue. For the sake of the exercise assumes that I can guarantee you that the elements of the queue complex will come only from a particular producer.

    It is difficult to give a good answer without really knowing what is happening in your loop of consumer.  Order matter?  Some of these processes can actually be done in parallel?

    My first suggestion would be to make another loop (and corresponding queue) just for writing the disk.  Because that tends to be a "slow" process anyway, it should help releive your loop of consumption at least a part.  But, still, I do not know what that your orders 'complex' need you.

  • HP Officejet Pro X476dw: Printer will print-elements are sitting in the queue, but the unit stops before printing

    The printer starts as it will print but then stops. The elements are sitting in the queue, so they are sent to the printer. I turned on and out and unplugged to reset. No error message. Connection to the local network.

    Hello

    Download and run the utility HP Print and Scan Dr. link below to solve the problem.

    www.HP.com/go/Tools

  • Is it possible to get the data type of element of a queue to itself?

    Hello world

    I have a Q which has a cluster as data type of element.

    now when I want to enqueue

    I will use bundle-default-

    and for this I have to have my current data type

    (long cable as (perhaps after where I got the Q).

    My question is,

    If there is a method/property-node/something that allows me to

    the queue of wire inside Refnum and receive the data element type.

    If I can get into the top of bundle-default?

    (I really want to have this cable in all directions)

    is this the reason why I'm asking here

    aid for the Refnum of outgoing queue to get a queue, the method

    indicates the data type of element and so I hope that there could be a solution.

    thx for your time

    and soon

    j

    Get queue status must be output with the type of data (more precisely an array of the data type and an array of clusters if the data is itself a table). If you do not set the items back to entry to T, this should not even cost anything.

    That said, I agree with others that it is better to what actually a typedef.

  • Best way to initialize a queue with the elements of the array

    Hi guys

    I'm looking for a bit of performance optimization...

    I'm developing an application of measure of noise using LV8.6 and Win Xp /Win 7.

    To say things very simple, I have a loop that samples and a loop that does the calculation. data are shipped in a queue waiting, producer / consumer lifestyle.

    So far so good.. It is - is there a specific and more optimized way to declare this queue?

    I was wondering if the notifier queue with an initialized in fixed size array element (the number of samples PR. read sound card will be known at run time) would produce a line which would be less burdensome on the dynamic memory compared to an allocation obtained using a simple queue control no value.

    I have attached a copy of Θcran to maybe make the most obvious question...

    I've been thru "clear as mud" thread, as recommended in other threads that covers this topic - but I get very high-tech, and I lost my way into it so... If you are looking for a more simple "you must use the #x solution, because...". »

    Thank you in advance.

    H ha wrote:

    you use solution # 2 because the initialization of an array first and by replacing its elements allocates any memory needed both as opposed to reorganize the memory as the table grows in size.

    That your response has to do with a queue?

    Using the option 2 is not a thing about creating a queue with a fixed number of items. Either you start with an empty queue. If you used a constant empty table with option 1, then this would require less memory in the VI himself. If you want to set the size of the queue, thread of something of this entry.

  • Hot flashes recorded more open in FireFox

    I saved the flashes such as animations and even games on my computer so that I could enjoy always, online and offline. But recently I can't open any of them, I just need me to the home page and when I try to download, it's so instantly instead of the brief 15 seconds it takes normally and does not always open. Hot flashes work very well on the sites, and it opens in Internet Explorer. I clear my history so I wonder if I did something for the cookies.

    If you have the links to what you have, try to make new links.

  • How can I remove application Mega backup that I installed when I thought I was the update for adobe flash download. I've got El Capitan.

    How can I remove app Mega backup of my desktop computer. He got installed when I thought I was downloading an update for adobe flash.  I closed the application them tp mpved ot trash, but he would not accept it stating still open app.

    "MegaBackup" is an application of unworthy of trust-storage cloud or perhaps real malware. I have not tried to make this distinction. To remove it, please start back up all the data (not with the MegaBackup himself, of course). Then take the steps below.

    1 Select the elements of the connection tab in the users pane and groups of system preferences. Remove all elements with a name starting in 'MegaBackup '.

    2 log off or restart the computer.

    3. slide the MegaBackup application in the Applications to the trash and empty folder.

    Note that you cannot delete any application trying to drag its icon from the LaunchPad or the Dock. You must open the Applications folder in the Finder.

    You may have installed ad-injection with MegaBackup malware. If you don't see unaccustomed pop-up in a web browser, ask for additional instructions.

  • Size of the queue for Signal form write XNET

    Hello

    I am using the XNET library to play a preset on an output signal waveform. I work with LabVIEW 2014 SP1, 14.5 XNET on a W7 Pro 32-bit operating system. I use an NI PCI-8512 map. This is my first app using the xnet library.

    In my test application, I give the user the ability to set the waveform to play. The total duration and the sampling frequency can be set. The output MAY report is cyclical, with a cycle time of 0.01 s (10 Hz). I chose to use the same frequency for example my wave form and writing of the CAN.

    I have difficulty working with the size of the queue. In this example, it's good but I did not really why. I tested different values in the size of the queue and 100000 seems to be good up to 60 seconds. But for the longest (about 5 minutes), this method is not good...

    What is the right way to work in this mode and how use efficiently the property size queue? Information and example of using software and hardware OR XNET are not very convincing...

    Thank you in advance!

    You can add several items at the end of the queue until the queue is empty.  So if you want to write 10,000 points, and your buffer is only 1000 points, then wait and monitor the number of messages remaining in the buffer, and once it is less than 100 say adds an another 900.

    I used this method for flashing on CAN and LIN.  I needed a way to watch specific at specified times images, and a single point of frame link would not repeat (which could write the same byte twice what would be bad) I could have made the rivers and used avoiding, but a better solution was to use queue and add more pictures at the end of the queue to try to keep it as complete as possible.

  • number of items in the queue

    I'm working on an upcoming project that will need to use a loop of producer/consumer structure. Right now, I have added a simple test of how I want the VI to work, but I'm having a problem. When I run the VI, the "elements of # in the queue" increases ever from time to time. I used the Undo button to stop execution when the consumer is in an infinite loop (which I know is bad). I'm trying to ensure that all items are consumed and stored in my database.

    Anyone know what is happening with the VI?

    Thank you

    Eric


  • free the memory of the queue after ingesting large paintings on the RT/cRIO

    I'm working on an application, running on a cRIO, which receives files from the network (up to about 7 MB per file) and transfers data to the FPGA that writes to synchronized with an external signal. The files are never written to disk of cRIO, they are streamed directly from memory on a DMA channel. I can receive files faster I have save output digital, so I put the incoming files in a queue. Each file is simply a large array of bytes, and the queue contains arrays of bytes. Whenever I finished it passing an array to output digital, I remove the following.

    My problem is that, in certain situations, I get files enough to fill the cRIO memory, and that memory don't is released because the elements are removed. It is a normal behavior, according to other threads on this forum. However, I can't find a way to force to free this memory and in some cases, prevents me from download files more - I get error 2 ("memory") when I unflatten the TCP entering a table stream. I tried to add code that empty the enqueues empty tables, queue and then removes the empty bays, but apparently not to free the memory. Anyone have any ideas?

    It comes to LabVIEW 2012SP1, running on a cRIO-9076 with VxWorks like operating system.

    The only way I know to free up the memory of the queue is to destroy the queue.  But according to the architecture you, would not be possible.

Maybe you are looking for