Elements of library of Dreamweaver and hyperlinks - still not fixed?
I use Dreamweaver CS5 to rebuild my web page (http://home.comcast.net/~gregfisk), and I ran on an issue that seems to have been an issue for some time. Before going any further, I should say:
(1) yes - I searched both google, youtube, internet in general, adobe, adobe discussion forums forums and almost all else I can imagine trying to solve or find a solution to the issue. So if someone responds to this thread, please don't react not with "have you tried searching for adobe and web forums? Because Yes - Yes, I did. And I wasn't able to find a definitive answer.
(2) if there is a thread, a link, discussion or other website which profile the solution to this problem, my apologies to re-hash the question. But as I said, I searched high and low for such a link, and my searches came up empty. All threads that deal with something similar to this have not had a response or have expired after a few back and successive, but the solution (if it exists) has not been included.
Question: in my web page, have transformed the main navigation bar, header, footer and a few other things in elements 'LIBRARY' and used as model, so that, if I make changes to any of the items in the library, they will update on each page in which they were used. It is an interesting possibility, and I love it. But he seems to have a little problem that I can not find a solution. The glitch is the hyperlinks that use navigation elements of the bar for each "button". Some of them have added / a = href code library, and which deals with the hyperlink.
Most of the links in the navigation bar will be fixed as I continue to build and add pages. Who is related to the use of the 'Browse' and/or a link drag the button on the Properties tab works very well.
But I wanted to make some of the EXTERNAL links. For example, if I want a button to simply link to "www.google.com". Dreamweaver won't. Or if he does, there is no method clearly put in place to address this problem in a link in a library item. It automatically adds the code 'your.base.website.address/library/ www.google.com. And I can't figure out how to stop this. The code in the library item file seems to be OK - saying simply "www.google.com". But when published, it adds all that other junk and breaks the bond.
Looking at internet research I did to try to solve this problem, it has been a problem for many years. (Mais il ne semble pas y avoir de TOUS les threads qui disent A) "Yes, that is the question" and (B) "here is how fix you this.
Is it possible to add a link to an external site to a style of navigation bar menu which is a part of the library and it has NO point to your own Web site, then your library and Web site? If I can get it only JUST link to the external site without all of this than any other undesirable code, it won't work. Because navigation bars are commonly used today, and given that makes them in library items makes the easy site update, it seems a major oversight to have had this error perpetuated for a long time without resolution.
If there is a solution for this, or another method, please answer. And please specify the answers so I can walk through them step by step.
Thanks in advance-
Slyrr
But I wanted to make some of the EXTERNAL links. For example, if I want a button to simply link to "www.google.com". Dreamweaver won't.
That is right. You must do it yourself by typing 'http://www.google.com' in the field of the property inspector. Make the absolute links like this will not be affected by the question of whether or not the link is in a library item.
Tags: Dreamweaver
Similar Questions
-
I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said there is no internet connection, which is not correct. What should I do?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and disable your firewall
-also clear the cache of your browser if you start with a fresh browser
-check the file hosts for blocked entries https://forums.adobe.com/thread/1912777
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
- or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
Dreamweaver and GoDaddy does not
I created a site in Dreamweaver and use FTP to upload to godaddy, everything seemed to download very well, but when I go on my site, it seems that it is not the link to my css or images. My site is courtneymatulewicz.com, any suggestion would be appreciated.
Ok. Your site is not properly defined.
You are on the GD Windows hosting plan.
This means the root directory of your main domain nameis
httpdocs/
You must upload all your files to that folder on your remote server. As it stands now, you're uploading to a folder higher than your ROOT. That's why things are not working for you.
In DW, go to Site > Manage Sites > servers.
Change the root directory to httpdocs / see screenshot.
Nancy O.
-
Bookmarks and hyperlinks does not not in PDF
Hello
I have 2 pdf files, there are bookmarks which do not work. The other pdf has anchor links to direct you to some areas in the document, some work and some do not. How can I fix in Acrobat Pro 11
You must use the Connector tool to change the link objects.
-
Out of WiFi, still not fixed
Hello Mark,
I got my updates of the phone a few days ago who jumped on my screen and since then I am unable to use the Wifi / 4 g on my phone, still shows error
Then I read train you and followed the steps
@akashshrivastava
Steps 2 and 3 do not work because you are not on the network of Sprint CDMA. What happened with the first step? Have you tried WiFi after that?
Please put your reply in the thread above. Double locking this thread.
Mark
Support Forums Manager
-
With the help of the library of Dreamweaver and the ice
I am curious about the site pages created with Dreamweaver library (DW), as a news box that appears on every page. A DW library allows to update a duplicate on each page content area / Forum once and all pages are updated.
Is it possible to update the library on ice for all pages are updated? Or maybe you update each page.Hello xodMediaDotCom,
Library items in Dreamweaver to update only in the pages, they are included in in Dreamweaver. So although you can change the file library (.lbi) with InContext Editing, pages related to library item would not automatically be updated. You will need to update each page individually.
You could watch using Spry for any dynamic elements you want to include multiple pages. Take a look at the following thread that has the most information about Spry: http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=82&catid=859&threadid = 1416324 & enterthread = y
Best regards
Corey -
Install the user name and password, still not OK to install FLASH PLAYER!
I download the FLASH PLAYER, but when I install it, he need me to enter my username and password, I did, but still can't get through it.
I have my own username and password in ADOBE, but apparently does not demand to install FLASH PLAYER, now I cann't open Web site any video.
Pls help!
There are countless issues here on this same page with the same question: you must enter the administrator id & password of your computer.
-
FOLLOWED THE INSTRUCTIONS INCOMING AND OUTGOING STILL NOT ABLE TO SEND AN EMAIL.
QUESTION BY E-MAIL:
FOLLOW-UP iMAC SETTINGS for ROGERS.
THE SETTINGS OF MAIL SERVER INCOMING AND OUTGOING SERVER AS WELL. ALWAYS IMPOSSIBLE to SEND the incoming SERVER icloud MAIL READS. PO4, map.mail.me.com and outgoing readings ROGERS (OFFLINE)
ISTHERE A WAY TO CHANGE THE SETTINGS? THANKS ELLIE
OS X Yosemite 10.10.5
Serial number. D2 * 8J7It is difficult to read. Please use the top & bottom case.
Please provide a link to the instructions.
Please provide image on the screen to how you have configured these settings.
-------------------------------
How to show an image on the screen. Avoid personal identification.
on Mac, you do:
Command + shift + 3 will have the entire screen. You hear a click.
Command-shift-4 lets you decide what to take. Changes of mouse pointer. Move the mouse to the upper left corner of the image of desire. Press and hold the left key of the mouse to start the image. Drag the mouse to lower left where you want to stop the image. Mouse release.
You will get a .png file to the desktop image.
On the entrance sign of the forum, you will see the camera icon.
Click on the camera icon.
another window will appear.
Make sure you have selected the in your the computer tab.
Click the Browse button
A Panel to open the file. Select the file.
After selecting a file, I have this screen showing.
You need to click Insert Image. You may need to scroll down to see the button to insert an Image.
R
-
My iPhone 5 has charged for hours and is still not turning on?
My iPhone 5 of battery problems, so sometimes it's normal as the iPhone to charge for about 2 hours before turning on. However, this time he was charging for 10 hours. I was getting a little worried. I loaded etc and different Chargers. This morning, I plugged into my Macbook Pro and he was in charge. I continued to try to do a hard reset and then it spontaneously turned on while charging. I was so happy! But later in the day, he died again and now I'm stuck with the same situation but now nothing works at all. I'm about to cry... What should I do?
Call your Apple store and make an appointment to check out them. If all goes well, they will be able to change the battery for you.
-
Nikon D550 Lightroom 5.7.1 and will still not read format NEF
The 12-bit and 14-bit RAW will not yet read in the Lightroom 5.7.1 update. Also DNG Converter will not recognize the NEF files to the camera. Nothing worse than a new camera and not be able to import the photos. Can anyone help? Please...
It does not work. You need to copy to your hard drive. Do NOT use a Nikon utility to do! Nikon software is so bad that it tends to make the files unusable nave even in their own software, if you have an older version installed. Use a system built into the tool.
-
I have a HP Mini 210 t - 1100 that I bought in late 2010. When my computer tries to start, he returns with a black screen. The Caps lockbutton lights up, and it seems that the fan turns on, but nothing else. I tried the hard reset and the problem still persists. I don't have an external monitor I can connect to. There is no way I see for me to take on the back of the laptop to watch hard drives and that which does not. I tried to do the test using HP PC Hardware Diagnostics UEFI and I press the F2 key, with and without e fn key, press once per second for a minute and he pulls the top no screen at all. Even with th F8 and F11 key. In addition, my computer lacks a CD player, nor do I have the disks.
I moved and it took for office depot. Screen is not at all connect to a monitor. We determined that it was a problem with the motherboard and I bought a new computer. Thanks for your help.
-
Update error: U44M1I210 - August 2015 still not fixed
I'm sure that the people who had (have) this question will be frustrated crazy as I am. I have exactly the same issue on not a Mac, but THREE! I read all the suggestions and corrections, but responses varied greatly, I can't make sense of it all.
I hope that for once and for all solution to this error.
Not just a quick pointing to the links of the so-called corrections and solutions because they simply do not work.
I fought with this bloody problem for almost 2 months now.
Some applications I have downloaded about 10 times... still no go.
I want to expensive sky someone could give an appropriate response to this problem.
What are the causes? It is the operating system? What is an Adobe problem? Or is the climate?
Very sad indeed!
Hello
Please see the thread below where this issue has been addressed:
Update failed. Impossible to extract the downloaded files. (U44M11210)
I hope this helps.
Kind regards
Vivet
-
iCloud iOS 9.2 backup still not fixed!
So I was prey to the backup could not be completed problem and waited for Apple to get a fix and I was happy to see this problem mentioned as one of the bugs addressed in iOS 9.2, BUT she was not really fixed!
Now my phone is not backed up at all after all the geniuses of Apple has informed I have delete older backups to iCould and try again, my MacBook storage is too small to carry my 128 GB iPhone backup and now if my phone dies for some reason, my life went with it, and well more than she!
I tried save my iPhone to external storage, but Apple won't let you do that cause us are freaking slaves and not free to do what we want, so now that I hope that they would finally listen and solve this problem which has already been mentioned several times!
I've been through exactly the same thing. Have tried to reset network settings, off iCloud signing out and to iCloud, soft reset, change what's sustained upward and recently before 9.2 erase the old backup. Now I'm in the same situation have iPhone 6 more 9.2 128 GB with no backup icloud saying could not finish and last backup ever! I have not managed to get a backup of my iMac, but really really wanted to do a reset factory and restore unless I'm sure that it will solve the problem.
Apple please help. You have acknowledged the problem, but apparently the attempt to remedy with 9.2 didn't work.
-
Oracle Smart View 11.1.2.5.400 prompt bug still not fixed?
Hello
in our company we have 11.1.1.7.140715 OBIEE and we test Oracle Smart View 11.1.2.5.400 (Build 376) on Excel 2007 32-bit and Excel 2013 64 bits to allow our end users work easier.
Unfortunately, almost all of our reports contains guests and when you try to insert an object in the Excel worksheet, we see the 'object' error reference not set to an instance of an object and Excel crashes.
Is there a solution?
Thank you very much.
Hello
Check out the following:
When you try to import a report, a Pop Up shows Up in Excel with the following error: "object reference not set to an instance of an object" (Doc ID 1952856.1)
Noticed that:
CAUSE
Caused by a code bug introduced in 11.1.1.7.140715 patch bundle. Also occurs in 11.1.1.7.141014.
Duplicated 7.140715 symptoms and could not on 7.140527.
Bug 19545187 - SMARTVIEW 11.1.2.3 ERROR: OBJECT REFERENCE NOT SET to THE INSTANCE OF AN OBJECT - duplicate of below
Bug bug 19682114 - of the COLUMNFILTERPROMPTDEFN LABEL OBJECT IS NULL for all NEW CREATED REPORTS - internalSOLUTION
Apply Patch 19682114 - COLUMNFILTERPROMPTDEFN LABEL OBJECT IS NULL FOR ALL NEW REPORTS CREATED
-
error code 8000FFFF installed fixit has still not fixed problem
had to install a new hard drive in my computer. Because of the updates of windows, but always impossible to update this update. Guard's fault.
Shannon
Maybe you are looking for
-
Leave standby with fingerprint
ON my iPhone and iPad, I used to leave standby simply by putting my finger on the home button (do not press). After the update, it's is not possible! I always press the button at the tea house and then continue with the contact ID. It is not so elega
-
Showes up like a yellow question mark in the Devces system as 'other '. Cannot find a driver to install, both causes a loop continues when starting, new hardware found and cannot find a driver to install?
-
3845 coming Pro does not level Windows 10.
My machine was sold to me as the one who would be upgraded when Windows 10 became available. Tried several times without success. Learned today that my 32-bit computer accepts the upgrade that only a 64-bit computer accepts the upgrade. My Tablet
-
Windows 7 does not assign a drive letter
Windows does not automatically assign a drive letter to one of my discs usb hard or flash drives, if I go into disk management utility disk is still sitting there in line and assets and all I have to do is right click and assign a drive letter and ev
-
If the volume scroll area works, there is none - screen of it
Product name: HP pavilion dv4 laptop 1502TU Product number: VT100PA operating system: 32-bit Windows 7 While the volume scroll (quicktouch) works, but it does not have on-screen-display of it. I have already restored the system. FYI, I deleted some s