Elite Pavillion m9517c: install the bluetooth on my m9517c

Similar Questions

• Satellite P750: Impossible to install the Bluetooth Stack on Windows 7 (x 64) driver

  Hello.

  I own a * Satellite P750-02 t * (part No. * PSAY3A - T 02 001 *).

  In the order I did:

  (1) I formatted the HARD drive and reinstalled the operating system of * Windows 7 x 64 Ultimate SP1 *.

  Then I downloaded * ONLY the BIOS and drivers * of [his downloads page | http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25]:

  (2) I've updated the BIOS for * v1.90* (the laptop came with v1.80)

  (3) I have installed all drivers:
  -LAN and WiFi
  -Chipset Intel latest (available)
  -all video drivers (NVIDIA Graphics, Intel HD Graphics and Intel HDMI)
  -Card reader
  -Realtek HD Audio (later)
  -Synaptics Touchpad
  -USB3.0
  -IR
  TV tuner
  However, I * cannot install Bluetooth driver (v8.00.06 (T) *)...

  When I run the installation program of the [aforementioned page | http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it detects partially *'Bluetooth USB Controller-10 TOSHIBA'* (USB\VID_0930 & PID_0215 & REV_001)
  and then the installation freezes simply displaying + "install the Bluetooth driver. Please wait +.' and stay like that forever...

  I also tried to download a driver [another location | http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for laptops TOSHIBA - v8.00.02 (T):
  and followed installation instructions displayed under "Details".
  but he had the same result: the installer simply crashes...

  Install fix (* KB978258 *) recommended it did not work either - the message "+ update is not applicable to your computer +" appears.
  And I understand why - this fix is [already included: http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] in Service Pack 1 for MS Windows 7.

  I spent hours searching the Internet for a solution. Although there are some similar cases, none of the recommendations actually worked. I tried to install:
  -WiFi driver before installing the Bluetooth (someone suggested that these two are parts of the same card);
  -Repeat Mode Setup without failure;
  -* Toshiba value added package * hoping that somehow these tools will kick in.
  Nothing has worked...

  It is interesting to note that when, in the interests of experimentation, I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks | http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything runs smoothly!

  * Using connection Bluetooth on this laptop is absolutely crucial for TI
  I hope that I won't get back this beautiful laptop as I know that TOSHIBA is one of the best manufacturers and I am sure, that there is a solution to this problem.

  Thank you very much.
  Evgeny.

  Post edited by: cardiovascular disease
  specified on the use of another generic Bluetooth adapter with non-TOSHIBA driver

  You can use the key combination FN + F8 to toggle WLAN?
  You can also see BT symbol there?

  Before you begin installation battery BT try to activate BT module by using the FN + F8 key combination.

  Generally avoid some problem with it. Toshiba BT stack is tested on al models proposed by Toshiba and fireplace installation BT has, in my view, nothing to see what version of Win7 you use.

  Do not return this laptop. It has to do is just install drivers, tools and utilities. Please note: BT stack is included in the recovery image so BT must work.

  Also, I must say that OS installation of drivers, tools and utilities on Toshiba laptop must / should be installed in the correct order. Many tools can work only and must be installed on basic stuff that can be installed with other specific tools of Toshiba.

  Please send a few comments if this FN + F8 will work.

• Satellite Pro L770 - Win 7 x 64 can't install the bluetooth driver

  Hello.

  I did a clean install of Windows 7 x 64.

  I installed the SD driver and wireless driver.
  I tried to install the bluetooth stack...

  It installs the Bluetooth USB Controller-10 TOSHIBA and then located just 25% "installing the driver of Bluetooth." Please wait. ' Only option is to cancel. I can leave it like that for an hour and no change.

  Listed under other devices, I have:
  PCI Simple Communications controller
  SM Bus controller

  I can only assume that these two are related by the bluetooth drivers?

  Please help as I am more frustrated with this...

  Hello

  > PCI Simple Communications Controller
  > SM Bus controller
  > I can only assume that these two are related by the bluetooth drivers?

  SM bus controller could be the card reader so, eventually, you have to install the card reader driver.
  In addition, PCI Simple Communications controller could be controller Intel AMT.
  Download driver for Intel AMT of Toshiba page or page of Intel.

  What cell phone do you have exactly?
  Are you sure that the BT module is available?

• How to install the Bluetooth Module for Tecra S1

  Hello
  I have an old model S1 - PT831E-1DCEE-GR - and you want to install a Bluetooth (PA3121U-1BTM model?), but where should it be mounted?

  Kind regards

  Ulf

  Hello

  I think that on the Tecra S1 Bluetooth is optional.
  So on some laptops the BT has been installed on some not but I think that it should be possible to upgrade the unit with the BT module. (I hope ;))

  To my knowledge, the BT module must be installed in the place under the keyboard.
  But if you have no experience in these procedures you should t remove or install anything!

  The BT card must be placed above the keyboard area.
  To remove or to install the Bluetooth card, you must:
  1. remove the two white flat head screws.
  2 unplug the cable to antenna with the tweezers.
  3. disconnect the cards-SUMI (flat cables) on the system board.
  4 (remove the Bluetooth card) or (install the Bluetooth card)

  Be careful. But as I said above, usually it should be installed by a technician because the guys have more experience... you know

• Impossible to install the bluetooth driver in XP Mode, error "this software cannot be installed remotely. Please connect to the local computer, and then try again.

  I have win 7 pro as my OS, whenever I try to install the bluetooth driver in xp mode, I get an error message saying "this software cannot be installed remotely. Please connect to the local computer, and then try again.

  Check this box:

  http://support.Microsoft.com/kb/2438651/en-us

• Impossible to install the Bluetooth software

  Hi all

  When I tried to install the latest version of the Bluetooth 12.0.0.3600 for my T430s software, the installation will stop at the end with a Chinese error message. I would like to attach a screenshot of the error message, but can't seem to find any possibility to attach on this site.

  So now I'm stuck with the driver that windows installs by default (12.0.0.10). Whenever I start the laptop, I get an error message btwapi.dll missing. There is no Bluetooth entry in ' Control Panel / programs and settings ", so I can't uninstall the old driver manually. A new habit to install (probably because the old is there and damaged.

  Someone has any suggestions how to solve this problem?

  Thank you very much

  Thanks for your comments. I finished setting up the laptop from scratch. The first thing I did after installing base was to update the Bluetooth drivers and it worked without problem. I suspect that the culprit was the ThinkPad Bluetooth Laser Mouse. When I updated the Bluetooth software before installing the Bluetooth mouse, I was able to update without problems.

• How to install the Bluetooth firmware

  The communication between the software and the hardware blootooth is disturbed - I this before behhavior and it was corrected after an update to the bluetooth firmware (in a new version of OS X).

  So now I want to selectively reinstall the firmware of the internal bluetooth, as right now the message I get is: bluetooth is not available, and the bluetooth Control Panel is missing in system preferences.

  can someone give me a link?

  Kind regards

  Rob Tito

  What Mac model and what BT card is installed?

  What is the original install card BT?

  Have you tried reinstalling the BT card?

  Have you tried booting in safe mode?

  See if BT works OK on a new installation of Mac OS x? How to install OSX on another drive for testing purposes.

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Satellite L755D - cannot install the Bluetooth driver

  First of all, I am sorry that I have little technical knowledge.

  I recently bought this laptop and the sticker on top has the Bluetooth logo ' Bluetooth 3.0 + HS. "
  The Bluetooth logo does not appear anywhere else and just F8 offers wireless market.

  Start > all programs > Toshiba > Bluetooth offers a variety of options. They all try to install Bluetooth driver who stops and asks me to connect the Bluetooth device.
  Controp Panel > hardware and sound > Bluetooth COM Local does the same thing.

  I was not able to recognize a bluetooth device in Device Manager.
  Please help as I would like to use this feature.

  Hello

  What L755D do you have exactly (L755D-xxx)?
  Have you checked s operating manuals and instructions how to activate the BT module?

• Cannot re - install the Bluetooth on Windows vista 64-bit - Satellite A305

  I'm having a problem with my bluetooth to my new computer Toshiba A305-S6843.

  He runs the 64-bit version of Vista.

  The machine used version 6.10.02T build 20080128 on it, but the bluetooth radio would not allow. The device has been recognized in the Device Manager, but the mistake I'd get was "Bluetooth is not ready" when I clicked on ACTIVATE.

  So, I tried to install the latest version of the software on your downloads page . "TOSHIBA Bluetooth Stack 6.10.10 (T).

  When it unpacks and starts to install. The error I get is: "the operating system is not adequate for running on Toshiba bluetooth stack" and fails. »

  When I try to reinstall the old version "6.10.02T Build 20080128" - I get an error "1155" and that's all.

  Now, I can't reinstall any battery Bluetooth to operate.

  Help, please

  You probably downloaded the x 32 version instead of the x 64 one. Download the x 64 version and try again.

• Problem in installing the bluetooth driver

  I have a laptop of model 15-e038tx, the driver bluetooth recommend windows8 is Ralink rt3290-01. This driver is not available in the HP driver package, and any other driver Bluetooth does not work.

  Is there any need of parameters to change or no driver to install before the bluetooth driver? Please help me solve this problem.

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64949.exe

  If not, please post back its hardware id using the following method to find out:

  http://www.WikiHow.com/find-hardware-ID

  Kind regards.

• I can't install the Bluetooth device on my PC HP 1315ee G6

  
  

  Hello:

  You must install the Broadcom bluetooth software and driver for the BCM207002A0 bluetooth radio.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101140-1&CC=US&DLC=en&LC=en&os=4063&Product=5219106&sw_lang=

  The PCI device would be the following:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1&CC=US&DLC=en&LC=en&os=4063&Product=5219106&sw_lang=

• Pavilion G4-1311TU - do not install the Bluetooth driver

  Hi all

  my G4-1311TU Pavilion is having problem with the Bluetooth installation Win7 32-bit driver.

  In the Device Manager there is a BCM20702A0

  Hardware ID: USB\VIB_0A5C & PID_21E3 & REV_0112

  Now see the error message «no Bluetooth device waas» detected... "When you try to install the driver.

  Help please...

  Hello

  Hope this helps:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-Pavilion-G6-1251se-BCM20702A0-device-driver/TD-p/992407

  Good luck.

• Installing the Bluetooth software

  Bluetooth Dongle v2.0
  error I get is: cyclic redundancy check data error check the computer recognizes the Blue tooth adapter, but does not accept the software or can not find any other soft dishes for her.

  Hi dennis47,

  The cyclic redundancy check error is a bit of mathematics used to ensure that your data is correct when transferred. It is a verification procedure that will quickly identify when the data has been corrupted. If you get this message, it means that the file is read by your PC or your software is corrupted.

  If you use a Bluetooth adapter installation DVD, it may be damaged or may have a lot of mistakes in this regard.

  I suggest that you check if the disc contains scratches or dirty on it and clean the surface with the useful of clean, dry cloth and try again.
  If the previous step fails then I would suggest that you visit the Bluetooth adapter manufacturer site, download and install the drivers for it.

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device
  If the steps above fail then I would suggest that you contact the manufacturer of the Bluetooth dongle for more support.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install the bluetooth adapter to 4.0 on my HP Pavilion p6-2304eb trust

  I tried several times to install, but after installation, PC (windows 8.1) does not recognize my card?

  message: plug the adapter

  The bluetooth adapter is a TRUST 4.0 with productnumber 18187 bluetooth adapter.

  plugged in USB 3.0.

  Trust did not provide a driver for Windows 8.1, so the issue is not with your PC or operating system. Tyr plug it into a usb 2.0 port. USB 3.0 ports are picky about the devices.

  The problem is that the bluetooth dongle has no support for Windows 8.1.  Trusted contact .

  Sorry to bear bad news. I go back the dongle and find one that suports Windows 8.1.

• System crash when I install the bluetooth driver in windows 8.1

  HP Pavilion 15-e034tx

  When I install bluetooth driver in system failure windows 8.1 with this error "unhandled Thread Exception system.

  Bluetooth hardware ID: PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00

  Sir where is Bluetooth for Windows 8.1 driver?

  can someone help me please?

  Hello everyone I found the solution to this problem of Bluetooth. First of all, I want to share the essue of Blutooth hand in windows 8.1.

  History is actually a bit interesting: Microsoft has fixed a bug in the rollup of November which exposed a bug previously hidden in Bluetooth drivers for Ralink/Mediatek, resulting in all the world with a fully-updated Windows 8.1 and Ralink bluetooth (very common in low price/low-end systems) to BSoD unless the bumps users to a system restore point before updates of November. So yes, there are sometimes dangers for fixing bugs.

  Basic requirements:

  1. all drivers for HP laptop, BIOS and windows 8.1 implemented to date with the latest updates.
  

  File Requirements:

  1 8.1 Windows file update kb2917488 - x 64 (download link)

  http://www.4shared.com/RAR/CP-Ov9Hv/blutooth_update_fix.html

  2. Ralink software Bluetooth driver (windows 8 or 8.1 Windows)

  Basic steps:

  First check windows update, download and install any updates. Also download and install the latest driver for windows 8.1

  Download file update 8.1 for Windows kb2917488 - x 64 in 4shared link. (File name: Bluetooth fix)

  kb2917488 - x 64 Windows 8.1 updated in.cab(cabinet file) If you need to know how to install the .cab file installation.

  The .cab file installation steps

  Open the administrator command prompt and run the following command to install and integrate the Archives of Cabinet:

  Pkgmgr/ip/m:.cab / quiet

  Or,

  start/wait pkgmgr/ip/m:.cab / quiet

  Replace with the path (location) for the file .cab and with the file name of the cab without parentheses. If the CAB file is in the current directory (same directory where the command is executed, the path can be ignored.

  Example: pkgmgr /ip /m:C:\Users\User update fix\windows8.1-kb2917488-x64_43f3b89601d407a00cbf87297ab1ddb0ba1c4619.cab/quiet

  (If you do not understand the method of installing the .cab file search for it on google)

  This command silently install the Windows kb2917488 8.1 update file - x 64 in your system... complete installing the automatic system successfully reboots (wait automatic reboot)

  Now you can install your old windows 8 Ralink Driver Bluetooth software or update the latest driver with HP Support Assistant in windows 8.1.

  (Note: install all the drivers to run as Administration) (Sorry for the bad English)