EliteBook 2540p: driver problems Server 2012

Similar Questions

• EliteBook 2540p: driver missing

  Hallo!

  I just installed Windows on Elitebook 2540p 10. All right, but a device is not recognized.

  ACPI\HPQ0004\3 & 21436425 & 0

  Hardware IDs:

  ACPI\VEN_HPQ & DEV_0004

  ACPI\HPQ0004

  * HPQ0004

  Name of the BIOS

  \_SB. PCI0. ACEL

  Please suggest me what this is and if possible to give me a link to the driver.

  Hello

  Please try HP 3D DriveGuard Software

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

  Kind regards.

• OfficeJet 6700: Officejet 6700 Premium driver for Server 2012

  I need to connect this printer to a Windows Server 2012 R2.  There is no driver for this version of the OS on the driver download page.  Is one of the other compatible drivers?  Is there a driver available somewhere?

  Hello

  The extraction of the installation is complete, the incompatibility alert is displayed only after the installer extracted.

  Using any program for example extract 7z or Winrar as document attached to my previous post guide you within the following section:

  Customize Setup > step 1: copy the driver and software files > second method: copy the files from the web Pack

  In addition, you can click on the Windows Logo and the keys R on your keyboard and type folder in the Run dialog box, and then press OK.

  Open the installation folder that begins with the charadters (e.g. 7z1234) 7z, threshold there find you any required MSI file.

  You can copy the entire folder to another location for easy access...

  Kind regards

  Shlomi

• 2003 driver problems server on the laptop HP Probook 4540 s

  Hello!

  Please help me with problems Server 2003 drivers x 86 on laptop HP Probook 4540 s.

  I used xp on HP website drivers, but many would not install, (approx.) message 'unsupported' or the 'minimum requirements is not fulfilled is '.

  After several cycles of trial/error, I now lack the pilot of 7650 M AMD Radeon HD, instead of that there is a Standard VGA Graphics Adapter entry in Device Manager with yellow sign, with a value of:

  PCI\VEN_1002 & DEV_6841 & SUBSYS_17F4103C & REV_00\4 & 7FAD8D6 & 0 & 0008

  and an "unknown device", whith the value of: ACPI\HPQ6000\3 & B1BFB68 & 0

  I would also add that I am not completely satisfied with the sound, but I managed to find an IDT driver, which was accepted.

  Below is a more detailed description of my system and I thank you for helping me.

  P.

  ============================

  SYSTEM
  ======

  Operating system: Microsoft (r) Windows (r) Server 2003, Enterprise Edition (version 5.2.3790; build 3790)
  Name: Microsoft (r) Windows (r) Server 2003, Enterprise Edition
  Version: 5.2.3790
  Build: 3790
  Install date: 24/11/2013-03:36:56
  Service pack: Service Pack 2

  BIOS: Hewlett-Packard (version: 68IRR worm.) F.42; date: 16/07/2013)
  Manufacturer: Hewlett-Packard
  Version: 68IRR worm. F.42
  Date: 16/07/2013

  Motherboard: Hewlett-Packard (17F6; version: KBC Version 58.1F)
  Manufacturer: Hewlett-Packard
  Product: 17F6
  Version: KBC Version 58.1F
  Chassis: Notebook

  : Intel Pentium III Xeon processor (architecture: x 86; 2594 MHz)
  Name: Intel Pentium III Xeon processor
  Manufacturer: GenuineIntel
  Max clock speed: 2594 MHz
  Architecture: x 86
  Level 2: 256 KB cache size
  Socket type: U3E1
  Version: Model 10, Stepping 9
  : Intel Pentium III Xeon processor (architecture: x 86; 2594 MHz)
  Name: Intel Pentium III Xeon processor
  Manufacturer: GenuineIntel
  Max clock speed: 2594 MHz
  Architecture: x 86
  Level 2: 256 KB cache size
  Socket type: U3E1
  Version: Model 10, Stepping 9
  : Intel Pentium III Xeon processor (architecture: x 86; 2594 MHz)
  Name: Intel Pentium III Xeon processor
  Manufacturer: GenuineIntel
  Max clock speed: 2594 MHz
  Architecture: x 86
  Level 2: 256 KB cache size
  Socket type: U3E1
  Version: Model 10, Stepping 9
  : Intel Pentium III Xeon processor (architecture: x 86; 2594 MHz)
  Name: Intel Pentium III Xeon processor
  Manufacturer: GenuineIntel
  Max clock speed: 2594 MHz
  Architecture: x 86
  Level 2: 256 KB cache size
  Socket type: U3E1
  Version: Model 10, Stepping 9

  Physical memory: 7.9 GB
  Memory slot: 4.0 GB (BANK 0; form factor: SODIMM; memory type: unknown)
  Capacity: 4.0 GB
  The device index:-l' location of the bottom 1 (top)
  Label of the Bank: BANK 0
  Form factor: SODIMM
  Memory type: unknown
  Manufacturer:
  Speed: 1600 LV
  Maximum capacity: 16.0 GB
  Memory slot: 4.0 GB (BANK 2; form factor: SODIMM; memory type: unknown)
  Capacity: 4.0 GB
  The device index:-l' location of the bottom 2 (under)
  Label of the Bank: BANK 2
  Form factor: SODIMM
  Memory type: unknown
  Manufacturer:
  Speed: 1600 LV
  Maximum capacity: 16.0 GB

  Disk: WDC WD7500BPVT-60HXZT3 (698,6 GB)
  Legend: WDC WD7500BPVT-60HXZT3
  Size: 698,6 GB
  Manufacturer: (Standard disk drives)
  Interface type: IDE
  Media type: fixed the hard drive carrier
  Bytes per sector: 512
  Heads: 255
  Cylinders: 91201
  Sectors: 1465144065
  Other titles: 23256255

  CD-ROM: hp DS8A9SH to a DVD (CD-ROM)
  Name: hp DVD a DS8A9SH
  Media type: CD-ROM
  Manufacturer: (Standard CD-ROM drives)
  Drive: E:

  Video: Standard VGA Graphics Adapter (XX(b))
  Name: Standard VGA Graphics adapt
  Current horizontal resolution:
  Current vertical resolution:
  Course bits per pixel:
  Refresh rate:
  Memory size:

  Video: Intel(r) HD Graphics 4000 (1366x768x32b)
  Name: Intel(r) HD Graphics 4000
  Current horizontal resolution: 1366
  Current vertical resolution: 768
  Course bits per pixel: 32
  Refresh rate: 60 Hz
  Memory size: 1.0 GB

  Multimedia: IDT High Definition Audio CODEC
  Name: IDT High Definition Audio CODEC
  Manufacturer: IDT

  Multimedia: Intel(r) Audio display
  Name: Intel(r) Audio display
  Manufacturer: Intel (r) Corporation

  Network card: Realtek PCIe GBE Family Controller
  Adapter type: Ethernet 802.3
  NET connection status: connected
  Manufacturer: Realtek Semiconductor Corp.

  Network card: 802.11n Wireless LAN Card
  Adapter type:
  NET connection state: disconnected
  Manufacturer: Ralink Technology, Corp..

  It's good to know.

  I hope it stays like that.

• HP Elitebook 8570W: driver problem: other devices - device base system and unknown device.

  Hi guys,.

  After doing a clean update on my HP elitebook 8570W I had a few unknown devices in my device manager.

  The first is a device called "base system" in PCI Slot 2 (bus PCI 36, device 0, function 1). I tried everything in my ability to determine what is this device and what drivers to install, so far without success.

  In the same section. other devices, there is another unknown device on PCI Express Root complex that gives me the same headache.

  I hope you guys can help me understand this.

  If you need further information, I will be happy to provide that.

  Kind regards

  Didier

  Hello:

  The base system device is certainly the JMicron card reader needs the driver, not the alcor one.

  You need this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5257503 & swItemId = ob_124666_1 & swEnvOid = 4158

  If the driver above does not installing it automatically, try to install manually.

  To manually install the driver, go to Device Manager, click the Base system device.

  Click the driver tab.  Click on set to update driver.   Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  The file is located in C:\SWSetup\sp63637

  Make sure that the include subfolders is selected and see the driver installs like that.

• HP ELITEBOOK 8540w: DRIVER PROBLEM

  Hello I need drivers for it.

  Base system device

  PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C & REV_14
  PCI VEN_1180 & DEV_0592 & SUBSYS_1521103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  Base system device

  PCI VEN_1180 & DEV_0843 & SUBSYS_1521103C & REV_14
  PCI VEN_1180 & DEV_0843 & SUBSYS_1521103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  Unknown device

  ACPI\VEN_HPQ & DEV_0004
  ACPI\HPQ0004
  * HPQ0004

  Hello:

  You need these drivers...

  X 2 base system device:

  This package contains the Ricoh Media Card Reader Driver for the notebook models and operating systems. The Ricoh Media Card Reader driver supports the following media: Memory Stick, xD-Picture Card, MMC, SD and smart card.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46972.exe

  Unknown dev:

  This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• HP Elitebook 8470p driver problems

  Hello. I'm trying to imagine a HP8470p with Windows 7 x 86 business. I have an unknown device is coming.  The hardware ID is ACPI\HPQ6000 * HPQ6000.

  Can someone tell me what driver I need for this camera?

  Thank you!

  Hello

  You need HP 3D DriveGuard 5 from the following link.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5212907&prodNameId=5212908&swEnvOID=4054&swLang=13&mode=2&taskId=135&swItem=ob-110813-1

  Kind regards

  DP - K

• EliteBook 2540p: optical drive is no longer recognized?

  My EliteBook 2540p with the built-in optical player is no longer able to be recognized by the operating system. It is listed in the Manager devices, but with an exclamation next to its icon. When open for more information, he told me this

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall the driver and install one of my own, but as soon as I say Windows looking for new hardware, it goes ahead and installs its own and the problem comes back.

  Can anyone help? Thank you.

  Hello

  Try to follow the procedure under the resolution of the subtopic-method 3: difficulty manually the registry entries corrupted on the link below to remove upper and lower filters and see if that helps the issue.

  https://support.Microsoft.com/en-us/KB/314060/en-us

  Kind regards

  DP - K

• Graphic driver Intel HD in Windows Server 2012

  Hey guys, I downloaded Windows Server 2012 through Dreamspark yesterday and installed on my desktop. But the system cannot identify the Intel HD graphics 2000.When I try to install the official driver for Windows 8 to Intel. An error window came out and said that "the system does not reach the installation requirements.

  Could someone help on this problem, please? I expect Windows Server 2012 for a long time and this problem has made things stuck. I can't use my HD display at a very low resolution.

  Thank you.

  Uninsured, I don't know exactly what a thing make you laugh. No matter you believe it or not, it's here: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21180&lang=eng

  As I already said, what I find funny is the fact that some people like to say things like: "they have been waiting for Windows Server 2012 for a long time..." As it was the most important thing in the world, and as they wait for so long - it is a situation of fire for volunteers drill, they ask to.  It is the exaggeration of the issue that I find humorous.  Always, always will exist.  People think if they fall a few names, to mention a few things that make this situation 'important' for them - others will be more willing to help.  Often, this is the case - the human nature.

  Back to the part that mattered...

  "This software package will install the driver for the Intel® WHQL Intel HD Graphics 3000/2000 and® HD Graphics 4000/2500 for Windows 8 * Release Preview."

  Intel has drivers on Windows Server 2012 for other devices, but obviously not for the one you look at.  Just because they have one for Windows 8 does not mean it will work in 2012 Windows.

  Your problem is with Intel and what drivers they offer, not Microsoft (as I said already.)

  The drivers that you linked are for the Preview Release (foot) of Windows 8.

  If I were you, I would try all the drivers Windows Server 2008/2008 R2 for the product in question.  Although my quick research shows that none occurred for this chipset (probably because Windows Server is not a market that intel pushes for this chipset)-Yes, then I suggest to try the driver for Windows 7.  Using a Windows driver 8 beta is obviously NOT to give you the desired results.

  Try the Forums from Intel.

• vpn server 2012 problem

  I downloaded the 2012 standard test server on my server set up as a file server. We use it for is in and out of the office network drives. I had trial set up works correctly with network drives via VPN for remote access and the office on the local network. I bought a copy of windows server 2012 with 5 CAL license and reinstalled the program everything works. I have the updated VPN in place and it connects, but when I type in the location of the shared folder by using the name of the server that it will not conclude it, but it will be on the local network and using the external server IP address when connected to the VPN. Any idea what my problem is? This network does not use DNS or a domain.

  Much better if you can transfer this issue to this... http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  This forum is for servers... This forum is intended for consumer type products...

• HP Envy (700-420nx): HP Envy 700-420nx Ethernet (network driver) for Windows Server 2012

  I recently converted my desktop (HP Envy 700-420nx) in a server machine PC, running Windows Server 2012. But unfortunately the network stopped working. Then I installed the network (Realtalk) for windows 8.1 driver. But the problems still exist as it is. Says "No correct IP configuration" after an auto repair, "United Nations identified network" on the list of the networks.

  This is why I would like to download the specific driver for Windows server 2012 or any other possible solution to this matter is appreciated.

  Thank you

  Hello:

  See if the driver directly from Realtek works... DL and install the 3rd pilot (4th point) on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• Reviews of R2 Server 2012 - PVSCSI.flp - missing drive

  Hey all,.

  I'm having a problem with the installation of Server R2 2012 in ESXi 5.5 U1. I am running in a SAN environment. The hosts are connected to the San. Any assistance with this would be very helpful!

  I created a new virtual machine with all the basic settings. These are the changes to the SCSI card.

  Controller SCSI - 0

  Type of controller SCSI- VMware Paravirtual

  SCSI Bus sharing - No

  Hard drive 1

  Disk file - < SAN map >

  Disk configuration - Thin Provisioning

  Provisioned size: 40 GB

  Virtual device node: SCSI (0:0) hard disk 1

  Independent mode - < disabled >

  Guest BIOS:

  "Primary Master" - [no]

  Windows Server 2012 R2 Standard

  Image of disk pvscsi.inf file is found and installed.

  No disks are found.

  This problem has been resolved. It's a corrupt ISO that has been downloaded. The pvscsi.inf is correctly loaded once a new image Server R2 2012 has been downloaded.

  Only way I found out was when I loaded ISO in VMware Fusion. He said that the client tried to access the image beyond the size of the image. Unfortunately, ESXI has not thrown any errors similar to the following.

• Installation of Win Server 2012 9 desktop problems

  I have a 64 bit Windows 7 with 9 Workstation installed host computer.

  I am trying to create a virtual machine for Win Server 2012, but I get a license error.  There are other posts on this topic, but it relates to the work station 8.  I tried the solutions in these messages, but I still have a problem.

  I downloaded the ISO file using Internet Explorer twice.  Once I used the ISO to create the virtual machine and once I burned the ISO to a DVD and tried.  It always gives me this error when installing:

  "Windows cannot find the Microsoft software license agreement.  Make sure that the installation sources are valid, and restart the installation. »

  The problem is that I tried the installation of 5-6 times and I can't spend.

  All the world did this with success?

  Thank you

  Stem

  Try this:
  When you create a new virtual machine
  -Choose the option: I'm going to install the operating system later. (The virtual machine will be created with a blank hard drive.)

  Do not type the path to the ISO file

  -After the creation of new virtual machine also set the path to the ISO file (VM / parameters / CD-DVD.../Use ISO image file)
  -After the execution of the new VM to install automatically saved (if not run probably on purpose = error)

• Cf11 install problem on WIndows server 2012 R2

  We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine.  cfm files will not upwards in the default directory, but IIS displays htm thin files.  CF Administrator works fine.

  Web server configuration tool will only show "None" in the box of the IIS Web Site.  The usual CGI, APS, etc. were installed on IIS.  IIS and CF11 have in fact been re-installed.  Manual run wsconfig.exe shows no errors.

  The problem is that any call to a model cfm results an error (html pages serve very well):

  Error HTTP 500.0 - internal server error

  The page cannot be displayed because an internal server error has occurred.

  Detailed error information:

  Module IsapiModule

  Notification ExecuteRequestHandler

  Manager cfmHandler

  Error 0x8007007f

  URL requested http://localhost: 80 / default.cfm

  Physical path C:\inetpub\wwwroot\default.cfm

  Can anyone give suggestions for troubleshooting?  No newspaper appears to show all information that helps.

  Solved the problem... it is not a problem of one CF but and especially an IIS problem...

  (1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.

  (2) restart

  (3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development

  (4) restart IIS and CF

  (5) Web Server Config set to 'all '.

  60 restart IIS and CF

  The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.