EliteBook 6930p Upgrade of RAM appear not

Similar Questions

• EliteBook 6930p: upgrade hard drive

  Hi all

  My friend who has the same laptop want me to upgrade the disk hard 1terra Byte. the number p/n is kk082av of current hard drive is 148 GB. I was wondering is it possible for my friend put a hard drive of 1 terra byte or elitebook laptops 6930p limited to a certain amount giga bytes? My friend is planning on installing windows 10 32 bits at a later stage.

  Yes, it will take a 1 to 2.5 inches width 9.5 mm SATA HDD thickness. No problem. Also, he would go to 64-bit Windows 10 and it would be the thing to install if you have more, or 4 GB of memory.

• HP Elitebook 8540p: upgrade of RAM HP 8540p

  Hello

  I have a very special, HP Elitebook 8540p, running Windows 10 pro 64 bit on a processor intel i7 640 M dual core, and I'm confused as to the amount of RAM I can upgrade to.  I read that it can vary from 8 GB to 16 GB and beyond. My laptop has only two memory card capacity. The type of RAM cards are 204-pin DDR3 SO-DIMM.

  Any help would be fantastic. I'm trying to update my RAM to support the software of CAD 3D, which requires a minimum of 8 GB of ram, but I would like a little more if I could.

  Hello

  A table on page #16, your machine has only 2 slots so its 8 GB strips of RAM DDR3 Physclally Max supports are the same (pins, length,...).

  Source: http://www8.hp.com/h20195/v2/getpdf.aspx/c04141333.pdf?ver=17

  Kind regards.

• HP Elitebook 8560w: upgrade my ram and the correct use of slots

  Hello - my first post!

  I just bought HP 8560w refurbished seller.  It has a quad core processor and four ram slots.  I can post the SN and product number if it helps with my request.

  I want to max out my ram without disturbing the keyboard.  I currently have 4 x 4 ram installed so that four locations are used.  My machine will support a maximum of 32 of ram.

  Here is the query - I can remove the 2 ram sticks of the slots I can easily see when I remove the back (I guess these are slots 3 & 4) and replace them with 2 sticks 8 ram each?

  It would give me a total of 24 ram - 2 x 4 under the keyboard (slots 1 & 2) and 2 x 8 in two other passers-by.

  This upgrade would be OK and be recognized by the system?

  Thank you, Russ.

  Hi, Russ:

  It seems that you can according to the maintenance manual.

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03424153-1.PDF

  He says that one of the compartment of the expansion memory slot should be filled with a chip to add a slot 2.

  It also says the same thing about the locations of primary memory under the KB.

  See Chapter 4, page 51.

• EliteBook 8540w: upgrade memory RAM EliteBook 8540w

  Hi, I want to upgrade the memory of 4 GB (2 x 2 GB) in my laptop. I have 2 slots of memory in the laptop.

  No. my laptop is WD927EA #ARL

  Intel Core i5 processor.

  I bought 2 x 4 GB PC3 - 10600 CL9 204 Pin SODIMM, but it does not work.

  No idea what to buy?

  Here is the Manual:

  Manual 8540w

  It's the 4 listed compatible GB module:

  4 GB (PC3-12800 1600 MHz, DDR3) 641369-001

  The DDR3-1600 is apparently supposed to downclock at 1333 mhz.

  http://www.Amazon.com/HP-641369-001-1600Mhz-PC3-12800-memory/DP/B008L325TW/ref=sr_1_1?ie=UTF8&QID=1440416712&SR=8-1&keywords=641369-001

  http://www.Amazon.com/crucial-PC3-12800-204-pin-notebook-CT51264BF160B/DP/B005LDLV6S/ref=sr_1_2?ie=UTF8&QID=1440416712&SR=8-2&keywords=641369-001

  The modules have been listed compatible and had complete specifications, that latency was listed as CL-11, so perhaps the CL-9 latency is the problem with your modules.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP 15 g207ax: can I upgrade my RAM on hp 15 g207ax laptop? I want to upgrade to 8 GB

  The reason to spend my RAM is for games... I like to play games... I bought this laptop 3 months ago... There is information in some sites than my knees RAM can be upgraded up to 8 GB... But in the hp Web site, there is no information about the RAM... So I'm a bit confused. Can I upgrade my RAM or not?

  I hope that this information may help you

  Hello

  Please try the following manual/guide:

  http://h10032.www1.HP.com/CTG/manual/c04513485.PDF

  Several manuals:

  http://support.HP.com/us-en/product/HP-15-notebook-PC-series/7486438/model/7643147/manuals/

  Kind regards.

• Satellite P10 804 will not accept the upgrade of RAM

  Apologies, this is it is a bit long and also if this question has been covered elsewhere here: I had a good nose autour and have not found something that seems to help.

  In any case, I had a Satellite P10 804 during these past years, I bought in the United Kingdom.

  Quite early in my time with this laptop, I upgraded the RAM. It was 3 or 4 years ago, when memory was not as cheap right now, so I bought just a single 1 GB module. P10-804 will take up to 2 GB of RAM.

  The P10 804 came with 512 GB as standard in two modules. My upgrade means I got 1.25 GB, which was in very good health. Everything was fine until the end of last year when the defective laptop; I followed the fault in module 1 GB of RAM. It was a bit awkward since I now live in New Zealand. However, the provider of the RAM was very professional, stood by their warranty, and we arranged a swap. RAM prices had fallen, so I bought another module of 1 GB at the same time upgrade the laptop completely.

  Now the problems really started. The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange objects; No start at all. everything.

  Everything that works now is my original 256 MB module (his partner disappeared). This leads me to assume that I don't have some sort of hardware failure?

  1 GB modules are DDR333 SODIMM, CL2.5. This laptop will also have the DDR266 modules, and it has been suggested to me, lower speed might work. I can try this option since the RAM prices are * really * low now, especially if I get confirmation of this as a valid strategy possible.

  The laptop BIOS is updated to v2.00 (maybe?), and I also upgraded the HDD to a 120 GB unit (this works very well and is partitioned for XP and Linux). And from time to time I empty the fan.

  Any advice welcome. Thanks for reading.

  > The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange artifacts; No start at all. everything.

  Reading your message, I came to the conclusion that this issue must be linked to the new RAM module and this module is malfunctioning or is not fully compatible with your laptop.

  The P10 can be upgraded to 2 GB, so you should be able to use two single RAM 1 GB modules

  So it must be a module problem

• Laptop computer ZE5700 The wired connection is not picking up or connection/Can the upgrade of RAM at 2-4 GB

  Help, please. I am preparing my very old laptop that I found in my garage for a work at home job contract. I decided to see if this is true for her to make the laptop to meet the minimum requirements before as I have buy a modernized one. I have no problems with the Wi - Fi connection and I wish it was one of the requirements. But the laptop should be wired. I plugged my ethernet cable in the assigned location, it shows that it is running, because there is a green/yellow light in the port. Even if the CAP is turned on and is, it does not show as a network.

  Also can I take the RAM at least 2 to 4 GB

  Thank you

  Theresa Metel

  Hi TheresaMetel:

  Thank you for your inquiry.

  I hope you had a good weekend.

  I send a link to a document on "Ethernet" click here, click the link for the Internet solution and connection to the local network using an Ethernet cable.

  Your computer is a CTO model and therefore there is no online prescription.

  I provided you a link to the user guide, click here.

  I am also you send a link to a document ' Memory Specifications and upgrade of RAM (Windows XP, 2000 and 98) " click here.

  I hope these are useful to make your decision.

• EliteBook 8440p: EliteBook 8440p has no RAM 8 GB upgrade

  I have EliteBook 8440p with i7 M620, 4 GB of RAM and WIndows 7 64 bit installed.

  I wanted to update my RAM 8 GB as suggested here and bought 2 x 4 GB RAM of:

  KINGSTON ValueRAM 4 GB DDR3-1333 (PC3-10600) SDRAM-DDR3 CL9-9-9 204pin 1.5 Volt

  I replaced the 2 GB card at the back of the laptop with the Kingston 4 GB and when I started windows:

  • The BIOS showed 6 GB of RAM
  • But blocked when Windows starts, your stay at the black screen with the "starting Windows" without the points colored forming in a window.

  I tried to restart, but no change.

  No idea which can try to solve this problem, or switch to 8 GB?

  Thank you

  Nikolai

  Hello:

  Please see this post for a laptop with the same chipset related...

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634/highlight/true#M335108

• HP elitebook 6930p wifi works does not after imaging system

  I recently created an image of a hp elitebook 6930p and cloned it, when I noticed that the wifi does not work (although he was working at some point before I start Imaging). If I use an ethernet connection, internet works fine.

  I am running windows 7 Enterprise 64-bit on them.

  I have a good number of them and I installed a fresh windows OS on one and there is no problem with the wifi.

  I tried to look online for a solution and two came:

  1. Tap the Panel fast wifi 'button': when information, fast volume buttons work, the wifi is not
  2. reset the default settings in the bios: Unfortunately, these laptops were given to us and there is a password on the bios. I tried to enter anything. I'm afraid to push more in case there is a measure of protection against theft on too many failed password

  What else can I do to fix this?

  Have you checked HP Connection Manager?

  In addition, if you have cable network plaged in Wi - Fi would be disabled.

  

• Elitebook 6930p Wireless does not work then in the docking station

  Elitebook 6930p Wireless does not work then in the docking station, no idea how to fix this? It worked, then I got a soft image, not its broken.

  Visit this link

  WINDOWS XP - network connection turn off/on docking station

• EliteBook 6930p will not accept password to start Windows

  Laptop turns on and gets to the Windows login page. When I get home (Correct) password he first appears to accept it by showing "Welcome" and then stops the loading and displays the message "Servicethe user profile service has no logon.  User profile cannot be loaded. " with the OK button below. He then returned to the logon page session in anticipation of the password.  How can I get around this without losing all my files stored please?

  My machine is an EliteBook 6930p running Windows Vista Business

  Hello johnnyjimjam,

  Your EliteBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

  Good luck!

• Satellite Pro M50 - upgrade RAM does not fit

  Hi, I'm looking to upgrade the ram in a Satellite Pro M50, I bought a stick of crucial but although he mounted in the slot (and was regarded as the correct product) machine didn't post with it, I bought another stick (different brand) and installed this but get the same problem. Looking at it, I noticed that the notch in the existing stick of 256 MB is a bit (a few mm) out against the new stick and of course although they fit into the slot, the actual pins on the stick won't line up properly.

  Is this a known issue? Do I have to buy a specific brand of RAM in order to modernize the system? Crucial guarantee their RAM to work, very unusual that it didn't work that way for this system of tosh.

  Thanks in advace to anyone who can enlighten us!

  GYS

  Hi GYS

  S let speak quite clearly, for RAM upgrade, you must use compatible RAM modules. I hope you know what that means compatibility work.
  So if you want to be sure you are using the right RAM modules and compatible I recommend modules memory live 1024Mo PC2700 to use with the PA3313U-2M1G part number.

  You can upgrade your laptop up to 1 GB of RAM and using two of these modules, you will be able to use maximum RAM and also make sure that the Rams will be suitable for your system.

• After RAM upgrade disk HARD is not visible on Satellite A660 - 11M

  I have the Toshiba Satellite A660 - 11M.

  When I upgrade the RAM to 2 GB 2 Six gaeremynck Bios can't see the drive on Start menu please help

  And when you use original RAM modules only disk HARD visible again?

• Satellite L30 - frequent BSoD after upgrade of RAM.

  This problem is almost identical to [this post | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=144540𣒜], but given that the response was too general and did not help, I want to provide more details about my problem and hope for a better answer.

  My L35 (i.e. American L30) came with Vista Home Basic and only 512M of RAM. It was slow, but smooth otherwise. The problems started after I upgraded the RAM to 2 GB occasionally a BSoD will appear, and the computer restarts after a second or two.
  Most of the time, instances of BSoD are not taken at random; usually, it happens when you watch a film or multimedia and online during the wake her up after suspend.
  Also, it happens much more frequently if an external monitor is attached. He does, connect an external monitor and watch a movie will result in BSoD with 100% certainty. My laptop has shared video memory, maybe it's a question here.

  The problem prevailed after that I installed Windows 7.
  Memtest86 + showed no problems with my memory
  Memtest86 covers all aspects of the use of the RAM?

  Is it possible that some problems may be overlooked by memtest86?
  Are there other tests of memory, that I could use, specifically to test the shared video memory?

  Not every hardware problem can be detected software.
  You have tested the RAM with Memtest86 +? Try using Memtest86 (no +).

  In the worst case, you must replace the RAM. Ask the dealer for a new computer. I m sure they will help you.