EliteBook 725 G3: Failed to update the Firmware USB controller of Type C

My laptop is one of the first to come out of the Assembly line and came with firmware 1.02.

1.08 BIOS that is out there, so I tried to update Windows 7.  It took time, but it's over and the tool said to restart.  That's all he said I remember.

Upon restart, it started giving beep codes.  I don't remember who it was, but it was something like 1 long 2 short or long 2 2 - short.  He kept with him for awhile and I got sick of him, so I pushed on and held the power button for the kill and then restarted.

This time, he got in the BIOS, who says she has been updated controller firmware USB Type C of v12 v13.  This FAILURE and gave me the option "restart and try again."  I took that, but he was never retried.

I felt comfortable with that, so I flashed the BIOS 1.08 again, this time in the BIOS using a Flash DRIVE (\Hewlett-Packard\BIOS\New\N73_0108.bin).  He went through much faster than on Windows, and in the end, he actually warned me that the machine may beep for awhile after restarting.  Uh, thanks for the warning, now it's too late.  Why doesn't Windows Update program gave me the same caveat useful?

In any case, the SystemRoot machine, but he did nothing to try to update the firmware of the controller USB Type-C.  I'm guessing that he defined an indicator saying somewhere that we are already at 1.08, so there is nothing new to do.

When the BIOS Setup is emptied using BiosConfigUtility.exe, it shows the USB Type-C controller firmware to be even 00.12.

So, how to update at 00.13?

Posted March 31, 2016 1.11 BIOS update corrects this problem.

http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7815285&swItemId=ob_163435_1&swEnvOid=4192#TAB4

Tags: Notebooks

Similar Questions

  • Satellite Pro A200 (PSAE7): failed to update the firmware Vista

    Hello

    I tried tp update the firmware of my HD-DVD player with new firmware TO35 (SD-L802B), but it is not possible. The upgrade of this Winvup button is not selectable. I had the same problem with an older firmware, but I just thought that it was because the firmware is up-to-date (book is 1 month old).

    Winvup shows my drive as "TOSHIBA DVGW/HD SD-L802B TO01 (26/10/07). The discription of To35 said, he needs a version of TO33 or T034, that is the problem?

    I got this firmware update form [link firmware: http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=DE&mode=allMachi nes & action = search & teddProduct = 737]
    so, it should be the right one.

    So what can I do to upgrade my drive? Watching a HD DVD is not possible :(

    THX,
    Holger

    It is not possible to update the firmware on your SD-L802B drive because the firmware released on the Toshiba page deigned for the TS-L802A drive.
    Do not mix these two discs! It is not the same thing!

    I found this site on the engraver of DVD Super-Multi SD-L802B
    http://www.storage.Toshiba.EU/index.php?id=3&PID=221

    But according to this page, the firmware is not available for this driver (at this time?  :|)

  • Failed to update the firmware SFE2000p

    Hi all

    I tried to update the firmware of a linksys switch sfe2000p but missed her at one point and now it keeps restarting tries to install the new firmware.

    Is there a way to solve this, I read out there that this switch has the ability to return to the previous firmware when something is wrong, but in this case he never install the previous version.

    Thank you

    Osmodiar

    Large. Basically, there are two ways to update the firmware. Use the Web based configuration of the SGE2000P or via the serial port xmodem page

    Configuration. If in case there are instances that you aren't able to access Web configuration page of the switch, you can upgrade the

    firmware using the serial port and access the configuration of xmodem, and that's what you were doing.

  • Failed to update the firmware Sony A7

    I'm updating my ILÇE-7, but the software update twice gave me a failure message.

    In "Reset camera" it gives the 'update is aborted due to an error during the process"

    I have Windows 7, 64 b. Everyone knows the same and what would be the solution?

    Hi pansomon,

    Welcome to the community of Sony!

    We're sorry to hear you're having trouble, update the firmware of your camera A7. Can I ask if you tried using another computer and the same error? In addition, please check the version of the firmware on the camera is running. It could be that the firmware is already updated.

    I also suggest resetting the device to its factory settings before trying to re-download the firmware. And make sure the camera has enough left autonomy (a life of the battery is full or at least 60% is recommended) before updating. Also remember to connect your computer to an outlet and don't set it not on the standby or sleep mode until the update at the end (that interrupts the download process).

    For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest to your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

    If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

  • Failed to update the firmware on DGND3700v2

    Tried to update v1.1.00.24_1.00.24 through wifi connected PC. Lost connection to halfway and now seeing power is pasted on the continuous red light. The attempts to restore the factory settings by pressing the red button behind have also failed. Thanks in advance for any help.

    [SOLVED] Set up the Ethernet with PC conn. Consulted on browser 192.168.0.1 and received the update option of the firmware via a plain text page. Connected to the hotspot of the phone and downloaded the http://www.netgear.com/product/dgnd3700v2firmware. Disconnected. IMG selected and extracted zip file. Transferred to the router. Web GUI appeared with all previous settings preserved. Phone line reconnected, tested, and applied Internet settings. Fact. I hope this helps.

  • OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

    I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

    1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
    2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
    3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
    4. He thinks for a while, displaying "recovery information...". »
    5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

    Any suggestions?

    You're welcome @justkwin.

    Here is the utility of a Mac computer:

    FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

    Kind regards

    Shlomi

  • 'Fatal error 65' when you try to update the firmware of the printer

    The printer firmware update fails with 'error 65' displayed on the screen of the printer.

    I have the HP LaserJet Pro 200 M276nw MFP color, just one month outside the window of the guarantee. Downloaded the latest version of the driver M270_colorMFP_Series_FW_Update - 20140718.exe and followed the instructions on how to upgrade.

    The computer running the installation displays no error and I get the face smiling at the end. However, the printing configuration always displays the old driver from 2012. Also, the printer display does not progress as stated in the manual of stable employment. On the contrary, at some point it displays 'Error 65' and then restarts.

    How can I update the firmware?

    Please try to use the 20140521 version only, I currently have audit whitin HP why 2 different firmwares are posted and will let you know once I'll get an answer... for now please DO NOT try to install the 20140718 version...

    Shlomi

  • Unable to update the firmware in Mezz KX4 - KR DP 10 GbE Ethernet X 520 14.5.9 version

    Hello

    Try to update Intel x 520 10GbE mezzanine NIC firmware on a blade of M620 fails with the following error:

    SUP0517: Unable to update the firmware in Mezz KX4 - KR DP 10 GbE Ethernet X 520 version 14.5.9.
    Detailed description:
    The image of the firmware specified in the operation did not properly apply. An internal error occurred.
    Recommended action:
    Try the operation again. If the problem persists, download the latest update of your service provider package and try the operation again.

    BIOS, iDRAC, Lifecycle Controller firmwares are newer. I tried to upgrade from iDRAC and directly from controller (using SUU) life cycle, the same thing. haven't tried yet the OS. I want to update firmware, because she refuses to get DHCP address when you try to boot from PXE to deploy the operating system. At the same time in the controller of lifecycle, in the configuration of the network, I was able to successfully get the addresses of the DHCP server and scan the Dell FTP site for firmware updates.

    Any ideas? Thank you.

    Egils

    I would like to start the update of the direct OMSA. Once updated, this should not happen again.

  • An error occurred during the update the firmware.

    Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?

    Thank you in advance for your help! ... soon a

    If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.

  • An error occurred during the update the firmware. -16

    I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

    I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

    I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

    I'm not sure what is the problem...

    Your airport is now not working? That is, the reset did not work.

    OR

    It doesn't have to be upgraded after several attempts?

    The airport is connected to the network as usual? You have full internet access through the airport?

    What model is the most convenient airport?

    The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

    What is the current firmware?

    If it is a very old model, they can sometimes give wrong if it has never been updated.

  • How can I update the firmwar in the tv 48T5445DG?

    Hallo,
    According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
    By TV now has:
    Softwareaktualisierung V.3.6.0.b
    SoftwareVersion V.3.3.6k
    I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
    It does not try to update on the Astra satellite.
    I also tried on the portal page, but did not find any option to update the firmware.

    So my questions:
    s ' Please explain step by step on how to upgrade the firmware
    -What are the parameters of sat/transponder update by Sam currend?
    -would be even better, if the update would be possible by download and USB
    -It would also be good to know what has been fixed.

    Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

    Hallo,
    According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
    By TV now has:
    Softwareaktualisierung V.3.6.0.b
    SoftwareVersion V.3.3.6k
    I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
    It does not try to update on the Astra satellite.
    I also tried on the portal page, but did not find any option to update the firmware.

    So my questions:
    s ' Please explain step by step on how to upgrade the firmware
    -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
    -would be even better, if the update would be possible by download and USB
    -It would also be good to know what has been fixed.

    Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

    Thanks for your help

  • Problem with updating the firmware on 40TL838G

    Hello

    I am very happy owner of Toshiba 40TL838 screen (G).
    Recently, I tried to update the firmware on it.
    Next steps in the user manual I tried to do the update of the network. "No new updates available" poped upward. I goggled solutions and came across a manual update of the USB.

    I downloaded the firmware recent Telefilm, coppied to usb (4 GB, formatted FAT32).
    Following the online instructions I have unplluged TV power.
    Plugged in USB. Connected TV to the power and he lit. And nothing happened.

    After 20-30 sec info abut being plugged usb pop uped question I wish to put on the Media Player.

    Firmware: 6.1.0M.1
    MBoot: 00480288
    MFC: 240226

    Any ideas how to proceed with this case.

    Concerning
    SLim

    Hello

    The firmware can be downloaded and updated via the network.
    But as far as I know you need to change the drive media or software update settings can not be started.
    Media Player-> USB media player-> installation
    Then press left or right, and select THE
    Now we turn on the TV
    Insert the USB key containing the firmware and after inserting the USB firmware update information appears on the screen.
    Then choose YES

  • Update the firmware, Toshiba TL 838

    I have problems with my TL838, I heard you can update the Firmware and this has solved some of the problems. Where can I find these updates?

    > I have problems with my TL838.

    What problems do you exactly with the LED Toshiba TL838 TV?

  • Gigashot K40HE - update the firmware on the SD card does not work

    Hello

    IBought a Gigashot K40HE 2 years and everything was good until he stopped keep the date in mind.

    I had the assistance of Toshiba phone told me to update the firmware with the following procedure:
    1. prepare a formatted, empty SD card.
    2. Insert an SD card to the card reader. Copy the firmware file
    (file name must be "psd.bin") in the SD card. Make sure that the new firmware file is copied to the SD card.
    3. Insert the SD card into the DV.
    4. Insert the battery in the DV.
    5. Insert the adapter in the DV. (dual power supply)
    {color: #ff0000} 6. press on "Power button" to power. Then the LCD displays 'FWUPDATE YES OR NO'. Select "YES".
    and press 'OK '. The DV will update automatically the FW. {color}
    7. after that the FW update completed. LCD display will show "OK". And then, will auto power off.

    Everything was good until 6... The DV starts as shown. It justs starts normally, asking me to set the date as every time I turn on my DV.

    I tested with a SD card that usually work on other devices, so I guess that the card is not defective. It's a card SD transcend 1 GB 45 x. And I know that the card is seen by the DV, because it creates folders on it for recording photo or video.

    Has anyone an idea to help me sort this out?

    Best regards
    Ozhades

    Hello ozhades,

    before you start an update of the firmware, it is very important the battery completely full.

    After the battery is fully charged please do the fw update again.

    Best regards

  • Satellite C670 - update the firmware on the CD-Rom drive

    Hello!

    I have a Toshiba Satellite C670. I want to upgrade the FIRMWARE driver for the optical unit.
    Please tell me where I can get the update.

    Features dvd / cd-rom:

    DVD RW: TSSTcorp CDDVDW Ts-L633A TO01

    Version: 6.1.7601.17514
    class CD-ROM
    Manufacturer: "Standard CD-ROM drives"
    OS: Windows 7 64-bit

    Please to help.

    Greetings

    You can update the firmware ONLY if the most recent version has been released for this drive.

    There was an update firmware for CD/DVD players * TS-L633C * and * TS-L633Y * as shown here:
    http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

    But for * TS-L633A * there is NO firmware update available.

Maybe you are looking for

  • Why are my synths distorting?

    Why are my synths distorting? Particularly film patches such as erosion and SFX. At first they seem like a lot, but after a while, as I work on the file, they develop distortions, sounds like static. The only solution I have found is sometimes I can

  • Install windows update 10 anniversary on SSD

    Product name: HP Envy 15-j122txPre-install OS: Windows 8.1 New clean installation operating system: Windows 10 pro I bought Samsung 850 pro 1 TB SSd for my computer hp envy laptop. I will replace an old 1 TB HHD by a new 1 TB SSD Samsung 850 EVO on m

  • error code 8000 4002

    I get the code for adobe flash player. It is said that it crashed.

  • native resolution is suddenly not available, how do I get that back?

    I tried to set up two monitors and in a certain way, don't ask me how, managed to remove the second monitor option, now when I open the display settings it only shows that the monitor 1 and monitor 2 disappeared. Is it possible to get it back? BUT th

  • XPS 13 screen flickers when you wake up after upgrade Windows 10

    Whenever I have turn on the laptop, or reactivate it the screen upward when it darkens, the screen starts to Flash. It's as if it was glitching seconds before it stops... It lights up for about 5-10 seconds. It started to happen after that I've upgra