EliteBook 8470w display (2 external + 1 internal) Configuration

Similar Questions

• HP Elitebook 8470w/display screen does not

  Hello

  We have a 8470w (XT908UT) computer laptop Elitebook with the screen on the laptop does not.

  Do us get the display on an external monitor but not on the laptop to display itself.

  Check the display settings of the control panel and Device Manager, the external screen is present while the computer screen is not.

  We have unplugged every unnecessary internal element for display (same HDD, keyboard and trackpad)), problem persists

  We changed 2 motherboards, 2 screens and card 1 gfx. Still the same problem persists.

  Can anyone help?

  Thanks in advance.

  After some research in the service manual and hp partsurfer.

  It seems that we have received a gfx NVIDIA instead of one card

  Gfx ATI card. The service manual says its compatible but not. Partsufer mentions only the gfx ATI card when the laptop

  PartNumber is submitted.

  the display is now correct.

  hope this helps future display troubleshooting.

• How can I find my external and internal port number

  I am trying to access the internet via a live ethernet cable from my router, except the computer im trying to use is new to the House, but is under xp. I also have a laptop which I use to ask these questions, which accesses the internet via a wireless connection. I open 'Internet Properties' and entered my IP address and I am now looking for my external and internal port numbers try to connect. Is it and most easy way? I'm on the right track? Help, please. :)

  If you really have a router, then this router should affect your computer all the configuration settings that it needs to connect to the internet (or local) automatically via DHCP.  The "TCP/IP properties" correct settings on your computer must be set to "Obtain an IP address automatically" and "Obtain DNS server address automatically".  If your router is configured correctly, it will automatically load these settings, such as all you need to do is to connect your computer to your router.  If this does not work, then you must download the manual of your router and verify its configuration.

  HTH,
  JW

• EliteBook 8470w: 8470w WIN 10 elitebook

  Hi, I think in upgarding and wanted to check the compatibility of the elitebook 8470w with win10?

  Problems with the hardware compatibility?

  In particular, intend to set up a HP 120W docking station, so I wanted to make sure that it will work with Win 10.

  Thank you, David

  It should work only HP didn't release driver patches for:

  Bluetooth

  Fingerprintscanner

  Some say that spirit the touchpath problems, but it works, but not all functions

  as the finger 2 roll, side scrolling...

  With a little research, you can manage on fixing problems like I did!

  But your system is ready to go...

  Greetings

  Sam

• Satellite A200-1BJ - no display on external monitor

  Hello

  I have a display problem with my laptop, which is:

  When I connect my computer to an external display (projector - data show - using the rgb or s-video cable), the contents of my computer are not displayed.
  I used F5, Catalyst Control Center, but without success.
  When I connect it with a TV using s-video, I get the message "no signal".
  I think of the existence of the other devices, but the content is not sent to the external display.

  I don't know what the problem is. I need to use my computer and the screen using a projector for my presentations, which is very common.
  The problem is that he used to work, then suddenly it stopped display on external displays.
  I could not understand the problem, then I thought that the settings have been changed accidentally.
  So I formatted my computer back to the factory setting, but my attempt failed and it still does not display on the external monitor.

  My computer specs:
  -Toshiba Satellite A200-1BJ
  -Processor: Intel Core2 Duo
  -OS: Windows Vista editions Home Premium
  -Graphics card: ATI Mobility Radeon HD 2600

  Does anyone know the solution?

  Thanks in advance.

  In your case I would update the BIOS and the display driver. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried different cables? Maybe it s faulty or too long.

  Also, be sure to use a rate of resolution and refresh supported for the external monitor display. You can change that in Catalyst Control Center.

• Best solution to display an external PDF / a viewer Android?

  Of the previous agreement, a link to the PDF in the file HTMLResources.zip files is not supported on Android - is this always the case?

  As a work-around before v31/v32, greeted us the PDF files on the server and put links in the article. When the user clicks on the link, it starts the external browser and downloads the PDF file so that the user can do with app support,

  However, since the last release (v32.2), native Android viewers seem to open every Web link in a browser in application, and all of a sudden our ways to download PDF files don't work no more (in our tests within the content viewer).

  What is the best solution to display an external PDF file in a native display Android in this case?

  Thank you

  A link to the PDF in HTMLResources files is now supported on all platforms.

• To display an external swf?

  Hello everyone

  I am new to Adobe AIR development.

  I have following code to display the external SWF on iPad. I him have not tested on the Simulator. It will work on the device? Has anyone displays external SWFs on iOS?

  I use Flahsbuilder 4.6 for the development. I created "New ActionScript Project Mobile".

  var request: URLRequest = new URLRequest ("http://< DomainName > / test3.swf");

  loader = new Loader()

  Loader.Load (request);

  Thank you

  AIR Flash, Flash apps work on iOS. It's just that you can't run sovereign wealth funds within Safari.

• Re: Satellite Pro U400-130 poor quality display on external monitor

  Hello

  If I connect an external monitor to the display quality VGA port is quite poor. It looks like a 'grainy twinkle"(sorry hard to describe). I have tried several different monitors and made all the adjustments that I can find. If I increase the contrast to max is not visible, but still the screen is too bright. The internal TFT is perfect.

  Have you tried to change the display settings on monitor itself (brightness)?

  I have connected to my office two different external screens (19 and 22) to U400, and the image is OK. I really don't understand what makes you so unhappy.

• EliteBook 8440p: how to disable the internal Bluetooth Radio and use USB Dongle

  I use a laptop HP Elitebook 8440p who has an internal Bluetooth radio, but it is not the latest version.  How can I disable the radio and use a USB Bluetooth Dongle?  In addition, any thoughts on how to increase the Bluetooth range of the Elitebook my Creative Sound Blaster E5?   The E5 is Bluetooth 4.0 and the radio in the Elitebook 2.1 + EDR.  A range extender would be beneficial?
  Thank you
  Dave

  @ABQDave

  Go into the BIOS under the System Configuration.

  Then integrated device Options.

  You can disable it.

  REO

• EliteBook 8560w: 8560w w / external projector does not not under Linux or Windows 8.1

  I recently bought an Elitebook 8560w opportunity and installed 8.1 for WIndows and Linux in a dual-boot configuration.  Using the laptop for weeks caused no problems at all.

  I used the display port on the screen on a TV 720 p to Samsung to mirror, so the kids can play games and it works perfectly, but when I try to connect to a home theater receiver as a passage to a projector 1080 p, the projected screen turn black for a few seconds, and then correctly show the desktop. This trend will continue indefinitely.

  I hooked it goes back to the 720 p TV and it works perfectly.  The problem exists in Linux and Windows.  I uninstalled the drivers and reinstalled a different version in each operating system.

  Ideas?

  The Elitebook works and no hardware or software problem.

  You may need to have an active DisplayPort to HDMI adapter since signal must pass the home theater receiver.

• Pavilion dv7-4285dx: cannot BOOT/POST/VGA external and internal LCD is dead (cracked)

  I cracked the screen of my HP Pavilion dv7-4285dx so bad that I can't read anything on the subject. I'm trying to start to an external monitor to the VGA port, but never to get a signal.

  I tried the key switch monitor, but that does nothing. I tried to unplug the LCD internal of the motherboard - not different. I tried a CMOS reset by removing the laptop battery, remove the CMOS battery, cut the power and hold the power button / stop for > 1 minute, then by restarting with external LCD just attached, but STILL no video on the VGA port.

  The video card is OK, because it starts with Windows and then I have the video on the external monitor.

  Although it is good that I can use the monitor to post once Windows starts, I need to have the video when the BIOS starts to change.

  Does anyone have another suggestion how I can get the BIOS to detect and display external VGA at boot time?

  Hello Todd_in_LA,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you try to start on an external monitor, and I would be happy to guide you to a resolution!

  Based on the information provided in your post, I recommend you contact our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  I hope this helps!

  Concerning

• work around the internal security gateway and the same url for web access external and internal

  role of the broker 1 quest
  1 security with the roles of web access gateway
  1 Server terminal server

  I configured the default gateway with the parameter security rule: "vworkspace security gateway".
  I created a custom with the 172.16.1.177 value rule (it's my client internal windows7).
  When I navigate to the internal url (fqdn's secure gateway server) I bypassed (tsdebug shows no sslgateway).

  But now I want to use 1 internal and external URL to type the same URL.
  Now when I navigate to an external URL of the machine internal with above ip I always get through security gateway, I see a SSLGateway

  Hi Erik,

  I think that this has been fixed in our latest version 8.5 - documents.software.dell.com/DOC252107

  Please download and upgrade your farm and let us know if you still see this problem.

  If you do, it may be best to save a service request so that we can see exactly what is happening.

  Thanks, Sam

• Separate authentication for external and internal users?

  Hello
  
  Asked me to come with a CEP for a client who wants a new system APEX is accessible to internal and external users. The client security team want to have two separate copies of the request for the APEX and both copies of the auditor of the APEX on separate databases on two separate servers from Weblogic to support different security requirements for both internal and external users. I don't think that is necessary as APEX should be able to impose conditions depending on what type of user is connected, by questioning the cookie passed in which could contain a flag to say whether the user is internally and externally. In addition, CAE can be used to further restrict external access.
  
  The middleware for the customer solution is managed by a third party, who have made the following recommendations:
  
  The domestic channel requires SSO to configure on WebLogic while the outside lane. Internal users must be validated on Active Directory, with RSA Authentication Manager used for external users. We cannot set up a listener APEX instance to use and not to use SINGLE sign-on at the same time. Two applications are necessary.
  
  Now, I understand from my understanding limited the listener of the APEX, it is possible to implement different rules depending on the type of user to access. However, might just as well not be managed from Magnatune APEX? We could write a custom authentication procedure that verifies again road and the SSO user authentication cookie or otherwise, as required.
  
  So my question is this: can it really be necessary to implement two versions of an APEX application, with two distinct on different servers APEX headphones, to meet the security requirements of separate here? Ultimately at the end of the day if that's what the customer wants, we have to build it, but I'm looking to reassure them via a CEP that won't be necessary. I think that the seller of hardware/middleware recommend that the client just because they do not know available in APEX itself custom authentication options.
  
  Please forgive any simplifications or the lack of details in the above - I'm more a developer APEX as a person of the infrastructure and a bit of a 'newbie' where the listener APEX is concerned. All advice gratefully appreciated!
  
  Graham.

  Hi Graham,

  It's a matter of people paranoid how and to what extent they trust their own infrastructure. Things could be easier than to split the environments, but I don't know if I just depends on the cookie because cookie can be easily rigged. But I think that the following architecture would be safe:
  1 internal users connect APEX listener somehow security team requires, come to APEX and maybe be identified using the internal IP address (range). To simulate the INVESTIGATION period should be difficult for external users.
  2. external users connect APEX listener through a defined gateway, preferably a proxy. All future requests through this gateway would be considered external users.
  You may add additional logic to the proxy, for example use something like 'mod_headers' in Apache HTTPD to add a page header to requests, so that you may identify as external users.
  You could, of course, also put it the other Tower and allow internal users to use some proxy to enforce certain rules of IP based address, or perhaps a few additional references as authentication for access to the proxy (which again could be transparent user in AD-configuration, at least if you stick with IE).

  You can easily implement the separation in your custom authentication process. But this architecture also allows some other compromise: even if someone does not trust your application logic to handle two types of application successfully, you can also use the proxy to enforce the specific call for an application id. Certainly you don't need to duplicate the infrastructure...
  Most of the companies already have a proxy for external users, for example to activate SSL and to hide other internal resources, for load balancing,... so I think you just need to put some configuration of the existing infrastructure and end up needing no component additional. Even if there is no proxy and yet, it would be an element of very light weight, easy to handle.

  So far, all this has nothing to do with the earpiece of the APEX. It's 'just' a web front-end for the instance of the APEX in the database. I wouldn't put a logic of network security in this service, but the split things upward front. The APEX listener can be patched to add some logic, but which was not supported.

  I think that this would work and should be sufficient for most of the safety requirements.
  If my picture was not painted understandable, let me know.

  -Udo

• iMac 5 k SSD SSD performance external vs internal

  Can anyone point me in the direction of a comparison of the performance of the real world into an iMac 5 k SSD internal flash drive and an external (ideally a lightning strike) and one on usb? Basically, I want to know how I give you performance by buying a small built in SSD and putting most of the data on an external.

  The brand data only real bench I've seen are of 2012 by BareFeats (http://barefeats.com/hard154.html), which means SATA rather than PCIe on internal and Thunderbolt vs Thunderbolt-2 on the outside.

• Re: Satellite A100-283 - 16:9 display on external monitor resolution

  Hello

  I just got an old Toshiba Satellite A100-283 and tried to connect it to a TFT 22 ". Somehow, it seems that this laptop graphics card does not support the external screen such as 1920 x 1080 resolutions. I find 16:9 1920 x 1440 resolutions and such but not at all.
  Is - anyone here know if there is a way to get this notebook running on an external display in 16:9?

  Thank you in advance for your help!

  Heike

  Hey Buddy,

  You can change the screen resolution to the 16:9 format when you remove the brand to hide modes that this monitor cannot display as [THIS | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_hide_modes-340x400.png] photo?

  Check it then [screen resolutions | http://blog.wildvista.com/wp-content/uploads/2009/12/Lightroom_vertical_res-355x400.png] again if you select another resolution of the screen