EliteBook 8540p: is the engraver of DVD 595759-001 for Elitebook 8540p plug-and-play

I have a DVD ROM drive, only in my 8540p here, and I just ordered a DVD (595759-001) burner to replace it with. Just install the hardware? Is this going to be a plug-and-play experience, or I need to find drivers for the replacement? Do I need to uninstall the driver for the original DVD ROM?

Hello

The driver for any optical drive is provided by Windows, then you should just connect the new device, but it can sometimes avoid problems by doing this as follows.

Hold down the Windows key and press R.  In the run box, type devmgmt.msc and press ENTER.  Expand the DVD/CD = ROM readers, made existing right click the device and choose uninstall.

Once completed, stop the laptop and made the new optical drive.

When you start Windows, then, give it a few minutes to load completely and you should find the new drive is running.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • can t get the dvd is plug and play no response

    For some reason any can t get dvd to the plug and play have teenager who could hepatitis changed something

    Hello

    1. What do you mean "t get to dvd don't plug n play no response"?

    2. using a cd/dvd external drive?

    3. what program you're using to play the dvd?

    If you use an external dvd drive and it is not detected, then run the hardware and devices Troubleshooter

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    If the DVD drive is detected and the disc is not read by the cd/dvd drive, follow

    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

    http://support.Microsoft.com/kb/321641

    Answer with the information required to help better.

  • [Solved] HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device.

    Recently, I noticed that my CD/DVD stopped working. He turns, but nothing happens; the disc is not read.
    I use Windows 7 Home Premium 64 - bit on an HP Touchsmart tx2z.

    I ran the Microsoft FixIt program through http://support.microsoft.com/kb/982116 and it has identified the following problem: 'HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device. »

    However, FixIt said that he was unable to solve the problem and discs are still read.

    I manually uninstalled the driver in Device Manager and then scanned for the hardware changes. The driver was reinstalled, but with the same problems as before.

    Any ideas?

    Thank you!

    Also, try following the steps for Windows Vista, which should also work in Windows 7, in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • The plug-and-play USB mouse will not work on Satellite A100

    Hello

    I have a laptop Satellite A100 laptop and when I try to install a plug and play mouse windows says it is not recognized - unknown device.

    Please help the mouse works.

    Thank you very much

    Hello Jayne

    It will be really interesting to know where you're trying to connect the USB mouse. Can you send description of mouse models please?

    As I know it is not necessary to install a driver for external USB mouse and mouse is usually recognized automatically. Please check if a driver installation is needed, and even request delivered must be preinstalled.

  • I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

    I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

    Hello

    1. What version of Windows are you using?
    2. What is the brand and model of the computer?

    I suggest to run the patch from the following link and check the status of the issue.

    Hardware devices do not work or are not detected in Windows.

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    If the problem persists, I suggest you to send us more information to help you better.

  • How can I disable the mouse pad when you use a mouse plug-and-play?

    How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

    Hello

    Check with support of the manufacturer system, documentation online or forums that there is probably
    Shortcut keys that enable and disable the touchpad functions.

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Original title: unable to disable my lan connection

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • I turn off my connection to the local network, it is showing message.

      It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

      Please answer soon

      You have problems with programs

    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi MVTDA,

    You can try the following methods and check to see if it helps:

    Method 1:

    a. Click Start and select run, type cmd and click OK.

    b. type net stop cryptsvc and press ENTER.

    c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

    d. restart the computer.

    e. open new command prompt and Type net start cryptsvc, and press ENTER.

    Method 2:

    If the same problem persists then you can try to uninstall the network drivers and check.

    a. click the Start button. Select run, type devmgmt.msc and press OK.

    b. Select the network card and right click on it.

    c. now, select Properties.

    d. in the Properties window, on the driver tab, click Uninstall.

    e. After you have uninstalled the drivers, restart the computer.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • On computer portable plug-and-play monitor is primary and is a secondary monitor to the laptop and I'm not able to spend their

    I had been using my laptop with a plug-and-play monitor. I disconnected and used my laptop on its own. I did something (not sure what) with the with default advanced settings and plug-and-play monitor. When I reconnected it the plug-and-play monitor was the main and the laptop was secondary. When I disconnect the plug-and-play monitor, I can see is my office. I tried to restart and log in the menu will only appear on the plug-and-play monitor.

    Hi DonDC,

    What is the brand and model of the laptop?

    What happens when scroll you the screens using the function key on your laptop?

  • The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

    Running XP PRO with SP3 and the latest updates as of 12/14/10.

    Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

    I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

    However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

    In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

    I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

    Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

    Hi pennybrown,

    Follow the steps below and check, if it helps:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

    To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

    a. Click Start, click Run, type regedit and then click OK.

    b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

    c. on the Edit menu, point to new, and then click DWORD.

    d. type DisableSelectiveSuspend, and then press ENTER.

    e. in the Edit menu, click on change.

    f. type 1 and then click OK.

    Note: This setting affects all USB host controller drivers in the system.

    If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • 1 error windows must now restart because the plug-and-play service taken end unexpectedly__error 2 - windows must now restart because the DCOM Server process Launcher service put end unexpectedly__

    1 error windows must now restart because the plug-and-play service terminated unexpectedly
    error 2 - windows must now restart because the DCOM server process Launcher service terminated unexpectedly
    -every half an hour or 45 minutes such error comes and restarting the laptop... How to solve this problem...

    Hi nevil.fidelis,
     
     
    This seems to be a common problem, I recommend you to follow the discussions below and check if it helps.

    You can follow the procedure posted by Bindu RMicrosoft support, Moderator on Sunday, 24 January 2010, at 20:04.
    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/ea20a793-5fe8-4448-9fa2-c3ef45069b87

    For additional help please refer to the following thread also:
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

    You can also check the positions of the TCD in the thread below on
    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/0f1a049c-4852-4321-91d7-dc1255f4d7a4
     
    Consider the response posted by Karena R, Moderator Thursday, December 31, 2009 at 01:28
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Do I need another new Windows Update to activate my Windows Vista to access the free secure recommended downloadable program for downloading various files and any other information you want?

    Original title: I need an another new Windows Update to activate my Windows Vista to access the downloadable recommended secure free program for downloading various files and any other information you want? Thank you! Randle

    Please help if you have the time giving me the name of a free secure downloadable software that works for Windows Vista, when the word is not on my PC for

    downloadind attached to power open, save, display, print and other means that this downloadable can help. I would be very grateful for your help! I works but not Word and PowerPoint if you have any suggestions that will be very solve my delimma of not be able to successfully download these things I just Gillies

    Your expert advice, patience, attention to my request, time, are all valuable and appreciated! Thanks again and have a wonderful day! Randle

    Hello Randle,

    You can use your favorite search engine & download any third-party software that might be used to.


    Note:
    this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

    Hope the helps of information.

  • Plug-and-play is not listed on the list of services

    I am running Vista; USB, camera and microphone don't work; did some research and found the plug and play service is not listed on the service list so I guess that is not currently running.

    How to start the service?

    Hello

    ·         When you connect a USB device to the computer it gets detected?

    ·         You receive an error message when you connect a USB device to the system?

    I suggest you try the methods provided below and check if they help to resolve the issue.

    Method 1:

    See the link below and run the fix it tool, or follow the Troubleshooting Manual for solving problems with USB devices in Windows Vista.

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Method 2:

     

    Make sure that the plug and play Service is set to automatic and started. To do this, follow these steps:

    one), click Start-Run, type "services.msc", click on OK.

    (b) when loading the Services window, navigate to the 'plug and play', double click on it to open it,

    (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change.

    "(d) if she once said:"Automatic", then click on the "Recovery" tab at the top, change the first"

    Line for "Restart the Service" failure", then click on" "apply ', then OK. "

  • How can I reinstall the non-plug-and-play drivers that I have uninstalled mistakeningly?

    I have a Dell Inspiron and recently started having random blue screens, close down and the inability to get out of hibernation with her. I ran Microsoft Security databases, and he is found to have viruses Alureon.A, whom he said he eliminated, but when running - it again, it was in Quarentine. Tried to get into SafeMode w / networking to remove and it quarentined again. Return to normal and it works, it shows up again!
    I did some research on Google and found another way to remove it by devmgmt.msc and could not find the file that it supposed to delete. A next post had a list of non-plug-and-play drivers, and I misread this post and uninstalled the files he had. Reading - it a second time, they were not the drivers to uninstall! So now I uninstalled the drivers, that I should not have, and I'm afraid to turn it back on. What should I do? Is there anyway I can get these drivers or is it easier to reinstall Windows Vista all together and fix the drivers and get rid of the virus?

    I was also unable to update Windows with this virus, with MSE.

    Accidentally uninstalled files were:
    A sound signal
    HTTP
    NDIS system driver
    NDProxy
    Null value
    RDPCDD
    Remote Access Auto Connection Driver
    VgaSave

    First of all, I recommend you download and run the program below.  It's the only one I found that systematically identifies and removes infections Alureon.

    How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?

    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    So, I see two possibilities. Sfc/scannow in an elevated command prompt might reapair missing files and is worth a try.

    If this fails, try the system restore.  It is a risk and could fail and possibly further damaging the system.  If If is running it will probably restore the infection as well.  In this case, restart TDSSKiller and other malware analysis.

    Although I always discover a wipe and reinstallaton ultimately, it may turn out to be necessary in your case.

  • What he average when the green light comes on briefly when it is plugged and them goes out?

    I just bought the webcam connected and the Green led lights up and then goes away.

    Hi, Lord of the Manor,

    EDIT: Seen the following in response, I guess I should have asked, works the webcam otherwise OK?  Is that the only issue that light?  If so, then I would argue that it doesn't really mean anything and it would not be concerned about it.  I assumed, and the rest of this guess, the webcam is not working and it is one of the symptoms.

    What is the manufacturer, the brand and model of the webcam?  How did you install it or did you just plug it and expect it to work automatically (maybe it's a plug-and-play USB)?

    Are you sure that the webcam is compatible with your version of Vista?  Look at: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.

    Make sure that the appropriate software/firmware or drivers are installed for the webcam.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  Search for one or more connected to the webcam and confirm that they are operable and functioning properly.  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those for the webcam to all least, even if Device Manager indicates that they work - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  If there is any software or firmware as well (from the website), make sure that you install that as well in the order defined by the instructions (sometimes the order of the questions includinding if or not it is done while the device is plugged in or not).  The site may also include installation guides and/or the user manuals that can explain the purpose of the light and what it means when it is on or off and how to turn it on if it should be on to operate.  It is very difficult to help without details on the webcam as each works differently.  Actually, I don't even know if that's a mouthful in by USB to firewire or else however.

    I think it is unlikely that it came with no software, firmware, or drivers of any kind (mine did).  After plug in and do all the installations are required, go to start / Control Panel and see if there is a new icon for the Webcam and if so, click on it and try to configure it to work with your system by following the instructions.  If not, then click on start / all programs and check if there are no new software installed that associated with the webcam and if so, click it and follow the instructions to set up.

    I hope this helps.  If not, post back with detailed information (enough so that we can find the manufacturer and the specific webcam online) on the webcam and we will try to help you further in the establishment knowing that additional information.

    Good luck!

  • XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

    XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

    It is usually best to install the drivers before connecting the printer. Use the printer installation disk, if you have one, or follow the procedure here:

    http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&l=en&s=Gen&DN=TT1092882

Maybe you are looking for