EliteBook 8560p: unable to turn on Mobile Broadband - 10 Windows

Similar Questions

• HP EliteBook 8560p: can not turn on WiFi: the button is orange, and nothing happens when you press

  Hello

  I have a problem with my wifi. The button always orange and nothing happens when I press on it: no errors, no message, no reaction at all. This is why I can't use WiFi.

  The laptop is a little new: I use only 2 months.

  1. number and product name

  HP EliteBook 8560p
  НР LQ589AW

  2 operating system installed (if applicable)

  Windows 7 Professional 64 bit

  3. error message (if any)

  No error message

  4. all changes made to your system until the problem occurred

  My windows crashed and I got it from archive created a few days ago. Archive includes all data from hard drives, the system has been restored exactly as it was before the accident. I still don't know if this caused the problem (or if the problem occurred after that): it happened a month ago, and I had no WiFi available at the time and only tried to turn it on a few days ago.

  Additional details:

  In device manager wireless card is appearing as functioning normally. In the management of the adapter Wi - Fi is on but says "no connection available. If I run diagnostic tests, he asks me to activate WIFI with a button on my laptop, which I can't do. In Mobility Center, it says "connection Wi - Fi is turned off". Activate the button is gray and impossible to click on.

  I already tried things:

  1. Reinstalled all the HP drivers from original CD.
  2. Card WiFi removed in the windows Device Manager (remove device), restarted windows, installed new drivers for it, rebooted again;
  3. Checked the mobility Center as suggested in one of the threads available on this forum;
  4. Do a hard reset for HP laptop (battery removed, push the button and hold for a minute).

  Thanks for any help!

  Anatoliy.

  I managed to solve the problem...

  Turns out that the problem was (apparently) caused by HP Power Assistant tool shipped with my laptop. Default profile has been showing the gray bluetooth and WiFi, and it was not possible to turn them on. I created a new profile, and even if all the parameters are identical to the default profile, it allows me to turn the BT and WiFi and turn off without any problems. Button is working fine now as well and goes from blue to orange when I press it. Active WiFi and it works.

  I hope this helps.

• ThinkPad X 1 carbon Type 3460 - Ericsson N5321gw / H5321gw Driver Mobile Broadband for Windows 10

  Hello

  I know that it is a well known problem but I still can't solve it

  I have 10 windows and my system is up to date but does not have the driver mobile broadband

  Even though I downloaded and installed the latest driver in Device Manager, it shows the following:

  The drivers for this device are not installed. (Code 28)

  There is no compatible driver for this device.

  I tried to change the compatibility of windows 7 and windows 8, but it still does not work

  Please advice

  Concerning

  Ali Elmeshmeshy

  
  

• Unable to turn on media streaming in Windows 7 Professional

  I currently have Windows 7 Professional x 86 installed.

  When I try to turn on media streaming continuously, the gray button and after a few seconds, the button is clickable again, but nothing has changed.

  I searched the internet and read what to do a clean boot and the reactivation of services and startup one programs can help find the problem.  I tried, but my Avast Free Antivirus runs regardless of this, so I uninstalled the program and finally had a clean boot.  Unfortunately, this does solve the problem.  Are there other methods that can solve this problem?

  Hi Immahobo,

  Method 1

  I suggest that you uninstall and reinstall Windows media player, and check if it works.

  (a) click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to deselect the checkbox next to the Windows media player , click OK.

  (c) restart the computer.

  (d) back to Windows to enable or disable features , and then select the check box next to the Windows media player , click OK.

  (e) restart the computer and check if it works.

  Method 2

  If the previous step fails, then I suggest that you restore the default settings for Windows Firewall and check if it works.

  Restore Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/restore-Windows-Firewall-settings

  Method 3

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to turn off hardware acceleration in Windows 7?

  I can not turn off hardware acceleration for troubleshoot change settings is grey shadow on. I really need to change hardware acceleration to make the flicker of judgment of the cursor. I have Intel 82945 g GMA. I know that Intel GMA is not the best but I could change the hardware acceleration is Windows XP. Please tell me how to disable acceleration or the slider will upset me to death. I have Intel GMA utility and has no ability to change or disable hardware acceleration.

  My system:
  Windows 7 Ultimate 32 bit
  Pentium 4 3.00 GHz
  1.50 GB OF RAM DDR2
  HARD DRIVE 80 GB
  Intel 82945G (Intel GMA 950)

  Please answer before my funeral! Laughing out loud!!

  Hello

  Method 1: In order to troubleshoot mouse flickering issue, I would say you run the hardware and devices Troubleshooter and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: update the driver graphics card and the mice and other pointing device and then check if the problem persists or you are able to adjust the hardware acceleration.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Unable to turn on the services of windows (marked red) Security Center

  solve pc problems red marked while on the page of the lottery!

  Hi Davedangerous,

  ·         What version of Windows are you using?

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  ·         What exactly happens when you try to activate the services of windows Security Center?

  ·         You receive an error message?

  ·         Do you have any other security software installed on the computer now?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to check if the Security Center service is set to automatic and started and change accordingly. To do this follow the steps below:

  a. click Start.

  b. in the Start search box, type services.msc and press enter.

  (c) in the services window, do scroll down to Security Center.

  d. right-click on it and click Properties.

  e. check if the Startup type is set to Automatic, otherwise set it to automatic.

  f. click on the Start button, this will start the Security Center service.

  g. click apply and Ok.

  Check if you can enable the Security Center.

  Method 2: If the problem persists, you have other security software installed on the computer, also try to temporarily disable third-party security software and try to check if you can enable the Security Center. If you are able to start, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Note: Make sure that you activate the software antivirus and other security programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps.

• HP EliteBook 8560p: what software to use biometric identification on Windows 10...

  After beeing migrate from windows 7 to windows 10

  The biometric sensor is find driver ok, and click ok.

  But no software was installed in windows 10 to handle this.

  On the support site HP... any ideas of the software I have to use.

  Can you help me?

  On windows 7 I used HP finger of validity or something like that.

  Thank you very much

  Concerning

  Turbo

  Or you can try the software Client Security Manager which replaced the software tools to Protect W10...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_158015_1&swEnvOid=4192

  But if all you want to do is register your fingerprints, first try the simple pass software.

• Unable to turn on Security Essentials in Windows 7

  Original title; Security Essentials

  My antivirus in Security Essentials Protection is disabled.  I did all the updates but cannot understand how to re-enable it.

  Hi Jim,.

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  Could you give us some more information?

  1 did you install another security program?

  2. When was the last time security essential has worked?

  3. are you aware of any recent software or hardware on the computer changes?

  This problem may occur if you have more than two security program installed on the computer.

  You can run a full scan using the Microsoft Safety Scanner and check for infections.

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  If the problem persists you can Uninstall and then reinstall Microsoft Security essential and check if it helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help you.

• HP Elitebook 8560p: 10 Windows drivers for HP Elitebook 8560p

  Hello

  I have a laptop HP EliteBook 8560p, and I run a clean installation of Windows Professional 10 64-bit on it. I want to ask you if you plan to deploy the drivers for Windows 10 because the CPU usage is too high, probably due to no updated drivers.

  Thank you.

  Please visit the following link:

  http://catalog.update.Microsoft.com/v7/site/home.aspx

  Accept to install the cab file.

  Search for 'VEN_8086 & DEV_1502'... and click Add drivers listed for Windows 10

  then search for "VEN_8086 & DEV_1C3D" and click Add drivers listed for Windows 10

  In the upper right corner, click on view cart

  Click on download, once downloaded, try to install the drivers.

• Unable to access HP hs2350 module HSPA + broadband (WWAN Ericsson) Mobile after upgrade Windows 8.1

  Hello world!

  I upgraded my HP Elitebook 8470 laptop 'Windows 8 Pro with Media Center x 64' to 'Windows 8.1 Pro with Media Center x 64 "OS.

  After this OS update module HSPA + Mobile broadband to the HP hs2350 (WWAN Ericsson) has stopped working.

  Follow-up of the steps to solve the problem:

  • I uninstalled the device and the driver through the Windows Device Manager, uninstalled the driver control panel software and restarted the machine.
  • Open the Device Manager and tried to update the driver, but Windows could not find a driver online.
  • Went to the support page for the HP product and downloaded and installed: update of firmware for Windows 8 "sp60091.exe"; latest driver Windows 8.1 "update sp63292".
  • Rebooted the machine, and the problem was the same:

  Because upgrade operating system I can't access my ADSL module (it is not detected).

  I checked the Windows Device Manager, and it seems that the driver is correctly installed but unit "HP hs2350 HSPA + Mobile Broadband Network Adapter" is constantly turning on and off with an exclamation point. See its properties I get the message:

  "This device cannot start. (Code 10) {Operation failed} The requested operation failed.

  or "this device is working properly".

  (this information to randomly change every second with the exclamation mark next to it).

  I tried to run Windows troubleshooting-> audio &-> & devices, but he could not find a compatible driver.

  Can someone help me, please?

  Is just to inform that Microsoft has recently developed an update for this material (Ericsson - Mobile Broadband MOBILE - HP hs2350 HSPA + Mobile Broadband Module network adapter).

  You can access it through Windows Update.

  Thank you, Microsoft.

• 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

  Hi all

  I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

  In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

  I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

  Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

  Now I can still connect to the internet with my 4 G card more every trip.

  Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

  Really appreciate for any help and answer including HP support.

  It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

  Thank you.

  Kind regards

  Wachyu

  I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

  It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

  I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

  VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

  A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

  If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

• HP Elitebook 8460p Note Book P: Mobile Broadband not found my sim on windows 10 signal

  Hi everyone how are you, I hope everything's going, brother am so an advance of the user, but I have a problem finally ago one day, when I try to install Windows on my PC HP Elitebook 8460p Note Book Pc 10 and this work will be perfect, but when I try to use my system imbaded HP un2420 Module device Mobile Broadband installed the driver of this pilot "Sierra Wireless HP un2420 Mobile Broadband Module «Driver package version 3.5.1308.3911»» after reboot and insert my sim cell on the divce, can he take my divce easily, but when I try to connect internet then the signal problem occoure, singnal not shown, looking for Singal but device and sim job will be after all when I reistalled windows 8.1 Pro then work perfect internet operation of signal and the connection will be, so if you have any solution to solve the singal problem on windows 10 then share with me thank you Once again

  Isaac Javed of Pakistan

  You, like the rest of us, will have to wait Windows 10 becomes a release for the manufacture of operating system.

  It is currently only a technical preview and has no support any manufacturer. When he was released, manufacturers will respond and we will know what hardware devices will be supported.

  You can always try to install the ADSL of Sierra Wireless HP un2420 Mobile "Driver package version 3.5.1308.3911" in compatibility mode.

• NB 100: How - top connection Orange UK mobile broadband (usb icon 225 stick)

  I just managed to get my connected nb100, here's how:

  Step 1 - enter the SIM card - instructions provided with the device

  Step 2 - upgrade of the network manager

  #Right click the icon of your management network at the top right and select "about". If it is less than 0.7 (such as mine) upgrade is necessary.

  #upgrade to the network manager > = 0.7
  > sudo gedit /etc/apt/sources.list

  #add the following at the end:
  > main deb http://ppa.launchpad.net/network-manager/ubuntu hardy
  > deb - src http://ppa.launchpad.net/network-manager/ubuntu hardy main

  #save, out, run Manager Update, install updates and restart the computer. If the Network Manager icon is not present - stops completely. Should appear after turning back.

  Step 3 - install the driver OHSS and ozerocdoff
  Locate and download the latest version (1.9 in my case) here: http://www.pharscape.org/forum/index.php?board=14.0

  > cd Desktop /.
  > tar zxvf ass - 1.9.tar.gz
  > cd hso_26 - v. 19.
  > sudo apt - get install build-essential
  > sudo apt - get install linux - headers-'uname - r '.
  > do
  > sudo make install

  Locate and download ozerocdoff
  > cd... /.
  > tar zxvf udev.tar.gz
  > cd udev /.
  > sudo make install

  Step 4 - configure connection
  Right-click on the network manager, and then select "Edit connections" > mobile broadband. Change the listed connection and insert the following code:
  username: orange
  password: orange
  APN: orangeinternet

  When you plug your icon 225 it must connect now.

  When you want to disconnect, pull the icon 225... I tried to use the disconnect on the Network Manager option and my laptop crashed...

  Feel free to copy and improve this howto.

  Dan

  Great! Thank you would be useful and interesting to other people here.

• EliteBook 8560p: laptop does not start

  My Elitebook 8560p unbootable. It only shows the HP logo. It has 10 (64-bit) Windows installed. The problem started 24.9.2016.

  Large.

  I thank very you much for the clarification.

  Well, this is not material but very probably linked to the anniversary of Windows update (AU).

  Please, look above for instructions. When you press the Esc key and opens the start menu HP (Fxxxx buttons), you have F11 option?  Can press you F11 and it loads recovery options? I think it works but please, let me know.

  -Si F11 works-

  Follow the instructions here [Option] > > http://www.tenforums.com/tutorials/4097-windows-10-go-back-previous-windows.html

  Choose Troubleshooting-> Advanced options-> back to the previous generation

  This option returns to the previous W10 built prior to THE.

  Note this option works only up to 10 days after the installation of the to THE.

  -If the F11 doesn't work-

  Download image for Windows 10 Installational ISO from MS site

  You can directly download from the MS site or download media from the Microsoft site creation tool, create DVDs of installation or installation USB the clean installation/reinstallation.

  > > https://www.microsoft.com/en-us/software-download/windows10ISO

  Be sure to select the correct edition.

  Directions for use:

  How to create an ISO bootable on USB > > http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows

  or

  How to write the ISO to a DVD > > http://www.ubuntu.com/download/desktop/burn-a-dvd-on-windows

  When ready with the USB or DVD:

  Please, shut down the computer using the power button.

  Insert the Windows USB thumdrive or DVD previously prepared

  Turn on the PC.

  As soon as you press the power button, keep hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu that can resemble the following

  

  Choose F9 to open the boot options. Select the USB drive as boot option.

  The PC should boot from the drive of installational Windows DVD/USB.

  Follow the instructions here [Option] > > http://www.tenforums.com/tutorials/4097-windows-10-go-back-previous-windows.html

  Choose Troubleshooting-> Advanced options-> back to the previous generation

  This option returns to the previous W10 built prior to THE.

  Note this option works only up to 10 days after the installation of the to THE.

  =============================================================

  Let me know if the above works. If this is not the case, there are other available tricks.

  If this works, return to the Windows desktop, make sure you settings > update > select updates to Defer

  Info:

  > > http://www.howtogeek.com/223083/what-does-%E2%80%9Cdefer-upgrades%E2%80%9D-in-windows-10-mean/

  You can see the AU for many months that it causes you problems of

  > > http://www.computerworld.com/article/3005569/microsoft-windows/how-to-defer-upgrades-and-updates-in-windows-10-pro.html

• Huawei E1820 using mobile broadband freezes my Windows 7

  Hi all

  I wonder if anyone encountered the same problem me and can provide me with help.

  I use Huawei E1820 mobile broadband with 21 Mbps speed on my laptop model Toshiba Satellite A300-1MC and Windows 7 ultimate. My problem is that when I start to use the Internet my Huawei E1820 device launch, initially everything is fine and everything is good, no problem surfing the net. But the problem when I start the download files or movies. After a few seconds of download my system freezes and I can do anything with my laptop. I have to press the power button to turn off the system and restart.

  I used the same device on another laptop and it had noproblem at all. It's really annoying me. Because I just bought this camera to take advantage of his speed and unlimited download.

  Note: when I use wireless home nothing like this happen.

  Hope I can get help from you guys =)

  SmilymaN

  A too your another laptop Win7?
  If this can be a general problem with Win7 or you think your troubles of notebook brand with the original image of Vista too?