EliteBook 8760w mobile workstat: connecting keyboard workaround - computer missing locking for zif connectors - portable bar

I had to remove the keyboard of my laptop, and when I did it seems that white locking bar of the zif connector has disintegrated.  Now I don't know how to reinstall the zif connector.  She inserts, but won't stay in.

Does anyone know of a solution?

You can buy just a lock bar that attaches to the keyboard?

Thank you.

See my response on the link below

http://h30434.www3.HP.com/T5/other-notebook-PC-questions/keyboard-ZIF-connector-getting-a-replacement-for-top-black/TD-p/1088815

Tags: Notebooks

Similar Questions

  • drivers for HP EliteBook 8540w Mobile Workstation (ENERGY STAR)

    Hi - I had to reformat my laptop - I think that I now need to install many drivers although the link to HP for HP EliteBook 8540w Mobile Workstation (ENERGY STAR) website does not work.  I hope someone can help

    @Leahcar

    HP support portals links are back on.

    http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?lang=en&cc=us&sp4ts.Oid=4097219

    To identify the network controller, you will need to provide the PCI\VEN hardware ID string as seen in the image of the example below.

    Open the section of the network cards by clicking the trianngle on his left and then right click on the device you need the driver for. Select Properties to call the Properties window , as shown below.

    Select the Details tab, and then use the drop-down arrow to select the material ID.

    After the string of alphanumeric characters together here.

    You can do the same for any device not already identified by your operating system.

  • Palm TX connects to the computer via WiFi for Hotsync

    I tried the network Hotsync on all my computers, XP, Vista 32 and Vista 64 (which started the whole attempt) and the device fails to connect to the computer, even if I set the IP address.

    My wireless network see the Palm and I am able to access the Internet through it, but it does not connect to my computer. Any suggestions?

    Here is my Wifi Hotsync help file:

    WiFi HotSync with a TX

    1. on your PC, locate the Manager HotSync (small HotSync icon in the lower tray of the right tool on a Winbox). Click top and check 'Network', then click again and select Setup.

    2. choose the network at the top tab in the window that opens and locate your HotSync name in the list. Make sure it is checked.

    3. press the button of TCP/IP and look for the IP listed for "main PC address. Write it down.

    4. turn on the Wifi on your Palm and you connect to your router.

    5. on your Palm, select the HotSync program and press the word "Network" over the HotSync icon in the middle of the screen. Below, enter the IP address that you noted in step 3. (Include periods!).

    6. tap the HotSync icon big above the IP address and hang in there!

    7. If you stand and nothing happens try a HotSync cable, then retry the HotSync Wifi. Sometimes, information is to be transferred from your PC once you check the network option. Also, don't forget to watch for any activity of firewall ask you questions about "HotSync.exe tries to access your hard drive" etc. You may need to define a rule to allow him to.

    On your TX, check these settings in the drop in Hotsync:

    Modem Sync: network

    LanSync: LANSync

    Network configuration: (Wifi should be listed as one of the networks)

    WyreNut

    Message edited by WyreNut on 02/11/2008 10:59
  • Restoring factory EliteBook 8730w (Mobile Workstation)

    Anyone know if there is a recovery on the 8730w default partition?

    I have a machine to a dismissed employee, nobody knows the user login, there doesn't seem to be an admin user, the hard drive has a special native mode SATA driver so that I can not start with a brick it emergency linux boot disk... no user is "with HP SpareKey" (whatever that is or has been).

    F11 does not start on a factory restore partition and there is no option to boot for the restoration of the factory menu (press ESC at startup and the options are: F1 - Information System;) F2 - Diagnostics; F3 - Insider Intel CIRA - what of * that *?; F7 - HP SpareKey; F9 - device boot options; F12 - initialization of the network; Sign up - keep booting)

    Quite sad, really

    Please don't tell me that I need to find the disk supplied with the machine because that will not happen!

    Chris

    Hey, Chris:

    Just order a new set of recovery disks by calling HP to 1-800-334-5144.  You will need to provide the model # and # of series.

    It costs $10.

    If F11 does not work, then the recovery partition is either missing, or faulty.

    You can also make your own drive of W7 or Vista installation and reinstall this way if you can read the 25 product key MS Vista or W7 characters on the bottom of the laptop.

    If you want to go this route, please let me know what OS you are running and give you directions to setup you need to do different procedures for Vista or W7.

    Paul

  • What is this connector for the backlit keyboard? (with photo) EliteBook 8760w

    I recently bought a workstation EliteBook 8760w Mobile with the standard keyboard (not backlit).  I really, really, REALLY want to replace the keyboard with a backlit.  I think I found the connector to the Ribbon of bavklight, but I would like confirmation before ordering a new keyboard.  Can (will?) someone please let me know if the arrow on the picture is oriented on the backlight Ribbon connector?  It seems to be in the right place, based on images of the underside of the backlit keyboard for the 8760w.  Thanks in advance for any help!

    Yes, there is nothing else, it might actually be.

  • EliteBook 8760w: keys does not not on Elitebook8760w function

    Hello

    I just did a clean install on my HP Elitebook 8760w and I can't install the driver appropriate for the FN (function) keys. The download page is incredibly slow, so download the drivers from the Web site is a huge pain at first.

    However please point me to the propper link that allows me to have my FN return feature.

    HP Elitebook 8670w

    8.1 Windows 64-bit

    Kind regards

    Jeroen

    Dear customer,

    Welcome to the HP consumer's Support Forum!

    Please install the hot next key driver and check if it works:

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5071184 & swItemId = ob_104998_1 & swEnvOid = 4059

    Hope this helps, for other queries in response to the post and feel free to join us again.

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you
    DRR
    Although I am an employee of HP, I speak for myself and not for HP

  • Base HP EliteBook 8760w model: computer suddenly starts running slow

    I was playing a game when the FPS started becomes weak, and it is gradually degraded over time. I suddenly realized that my power cord was not connected to the computer, and he was running low on battery so I charged it. After loading, nothing has changed, my browser was slow, staggered games, youtube videos would be in audio delay, then speed up again, just acted really bad. The CPU usage was always about 100% and before all this, my computer has been perfectly fine, extremely fast and usually I would get 144 fps in the game, but now I get 2-12. I tried malwarebytes, safe mode, clean boot, reboot, let it rest overnight, with ca running but no battery, using optimized bios by default, ccleaner clean and ccleaner registry clean.

    I never encountered this problem before, is it a virus or did I burn/break something?

    @Regrettings

    Welcome to the Community Forum of HP.

    A few ideas

    Try a Hard Reset / forced:

    =================================================

    Hard Reset / forced

    • Close running of programs, the browsers and games

    Next

    If you use a laptop

    • Close all your programs and shut down your computer
    • Unplug everything (little unifying for the keyboard / mouse external can stay)
    • Perform the forced reset for your laptop model
    • Start the computer and connect

    OTHERWISE, if you are using a desktop computer

    • Close all your programs and shut down your computer
    • Disconnect devices USB, speakers, other drives useless
    • Unplug the computer thirty seconds
    • Connect the power supply (plug in)
    • Reconnect the devices
    • Start / start the computer and log in

    Reminder: forced reset is a device reset.  The procedure do not destroy your files, or it destroys your Windows installation somehow.  Forced Reset "forces the system to erase and restore the software connections between the BIOS and hardware."

    =================================================

    More...

    • Try to reinstall your game.
    • Take a look at the overall performance from the point of view that the computer is probably not infected - it might be, but maybe it's a coincidence based on timing rather that on a computer running on battery - consider that the system may like to have low maintenance.

    Improving the performance of the system without adding memory (Windows 7)

    • Given the system beating on concern one of the programs that ordinarily would behave himself.  Take a look at the resource monitor - check what is running, how much resources each program uses, and whether these programs that are running are include as expected (not running Amok and steal all the resources).

    How to use Windows 7 resource monitor

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' Kudos on this post.

    Click on accept as Solution when my answer provides a fix or a workaround!

  • 8570w HP EliteBook mobile workstation. Starting stalls.

    My company uses HP laptops, and that the warranty is up, we change our laptops. My last two phones were EliteBook mobile workstations. Both have the same problem. My current EliteBook is a 8570w. Two laptops at home and at work, the appropriate docking station dock. Here's the question. If I have a USB device, as a recorder Sony handheld, connected to any of the USB ports, the boot stops at the 'stage of HP logo' and will not proceed until I disconnect the USB device. After starting, I can reconnect the USB device. It's annoying to have cross the disconnection - connect the process, I decided to find the source of the problem and fix it. The problem is that neither I nor anyone else seems to have the answer, but probably the Hang Up is in the BIOS. Is there a a way to solve this problem by making a correction in the BIOS. It seems strange that the boot sequence can not handle a 'active USB device' temporarily ignoring it. Is there a solution to this problem?

    Hello again hot_joc,

    It is good to hear from you again!

    As my knowledge and resources are only oriented towards consumer product, I recommend you contact our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

    http://www.HP.com/cgi-bin/hpsupport/index.pl

    I hope this helps!

    Concerning

  • My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

    My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

    Hello

    1. do you have HTC Manager installed on the computer?

    2. have you tried it with different USB ports?

    You need the HTC Sync HTC phone Manager software.

    Method 1: Try again with different USB ports and see if that helps.

     

    Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

    If the methods above do not help, you can contact HTC for additional help.

    Here is the link: http://www.htc.com/us/support/

  • How to get Windows Mobile Device Center to launch a mobile device is connected to the computer?

    Does anyone know how get REALLY WMDC to launch (actually not supposed to) - when a mobile device (MC9090) is connected to the system?

    (Or maybe suggest a request for REPLACEMENT for WMDC - preferably one who "works" with a little more frequency)?

    So far, I tried (many times):

    • Uninstall/reinstall of Windows Mobile Device Center
    • Uninstalling Windows Mobile remote adapter (when checked ENABLE ADVANCE NETWORK FUNCTIONALITY)
    • Uninstall the USB Sync symbol (when ENABLE ADVANCE NETWORK FUNCTIONALITY not verified)
    • Reinstalling WINDOWS 7
    • Using different USB ports
    • Disconnection/connection of device (MC9090)
    • The device and different cradle

    I'm running WINDOWS 7 ULTIMATE x 64.  At some point, the WMDC auto-lancé when the device has been connected - until a few days ago.  Since that time - nothing!

    I lost a couple of weeks on this issue, and this delayed my mobile application development!

    You can reach me at the: * e-mail address is removed from the privacy *.

    Original title: Windows Mobile Device Center

    Hi Robert,.

    We appreciate your efforts on this issue. Windows Mobile Device Center offers data and synchronization between a Windows Mobile-based device and a computer.

    Have you tried the possible troubleshooting steps on this issue, I suggest you contact the manufacturer of the device for assistance.

    http://portal.motorolasolutions.com/apps/us-en/support

    To request replacement of WMDC, use your favorite search engine.

    WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    It will be useful.

  • When you try to connect to my computer. several letters on my keyboard do not respond. I'll send this question to another keyboard. Can you advise?

    When you try to connect to my computer, a lot of letters on my keyboard do not preint

    Then you almost certainly have a bad keyboard. Letters of a keyboard are arranged in a grid electrically speaking which does not quite match the physical layout of the keyboard. When a group of stop working, this normally means a contact online or column failed.

  • HP elitebook 8760w fingerprint sensor

    I just got my new HP EliteBook 8760w and this is what seems to be a sensor of fingerprint on the right side in front of the keyboard.  It is a glossy black rectangular thing.

    My previous laptop was a fingerprint sensor, and I enjoyed using it to connect.

    It doesn't seem to be any software to record my fingerprints - it's a fingerprint sensor?  and if so, how do I use?

    Thank you

    Minnie

    You are the very welcome, Minnie.

    Yes, there is, and here is the link...

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071180&prodNameId=5071182&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-107304-1

    There should be a menu of help on how to configure the fingerprint sensor to work.

    You can also find this user guide.

    http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c02950624/c02950624.PDF

    Paul

  • Using HP ePrint mobile phone connected to the internet

    Hello, I have a strange problem.

    I have a printer HP Officejet 4630 e-all-in-one and I want to configure HP ePrint.

    I have the internet connection for my laptop, which is the computer that I use. It is also a HP. To set up your account to HP ePrint you need code number of the printer that can be printed from the printer control panel. Once you have the code for the printer, you can then go into your account to add your device. My problem is that my interent connection is the mobile phone that I use to connect my laptop to the internet. Then, the printer is connected to the computer using either the direct wireless feature or by using the supplied USB cable. For this reason, I can't get the code to the printer, the control panel of the printer. I use fixed internet connection, as the mobile phone is used as a modem.

    What should I do?

    Can I just phone technical support and ask them to send my printer code?

    ADSL ethernet cable must be physically connected to the printer in the same wasy as you would with an internet connection for your computer? If this is the case, I must connect the mobile phone to the printer using the wifi, which I think is possible - to my knowledge.

    Banhien, is that correct?

  • New HP Envy 4500 will not connect with my computer

    New HP printer shows blue light of connection with my wireless network but the printer connects with my computer (Windows 7 64-bit)

    I tried troubleshooting with doctor without success.  I thought about the restoration to the manufacturer's specifications. but worried about this procedure.

    Confused.

    Help please

    Adnilybrek28

    Welcome to the HP Forum.

    There is lots of useful information to the Web site of your printer.  In addition, the most important thing you can do is to install the full features software for your printer.  The installation process should help you with the login process.

    General instructions to install the printer software

    • Open drivers HP & downloads
    • Enter your printer model information
    • Select your printer in the list of the 'results '.

    OR

    • Enter your operating system from the menu drop-down
    • Click NEXT and scroll down
    • Find the category driver - software product installation
    • Select the base driver, e-print, or a full features software
    • Save the *.exe installation package (s) on your computer

    The files will probably save in the "folder"downloads. "

    If it is available, you can download print and scan doctor and / or other programs of the category-utilities

    TIP:

    Install the utilities / tools first. bit installation packages are smaller in size

    • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

    NOTES:

    •         Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
    •         Scroll through the list of videos back until you find the video that best fits your situation.
    • Connection USB: download and install the driver software before connecting a USB cable.
    • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
    • Once the initial installation is complete and functional, check / install category - updated

    There is valuable information about the Web site, including Manual, pages How-to's , Troubleshooting and SOLUTIONS section and alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

    Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

    Although I strive to reflect best practices of HP, I do not work for HP.

    When the answer is a good fix or workaround, click accept as Solution !

  • EliteBook 8760w: can I put my EliteBook 8760w with an mSATA SSD hard drive using the slot mSATA

    I wonder if it should be possible to use an mSATA SSD by installing it in the slot mSATA?

    Product number: LG673EA #AK8 (EliteBook 8760w)

    I inserted an mSATA SSD and it fits, but after booting, the computer gives the following message:

    No wireless module supported

    The system has detected the wireless installed in the system module is not supported and disabled.

    WWAN Module ID (703)

    I hope it's just a matter of configuration/drivers, etc...

    No, it's a physical barrier. Is the accommodation that you turn the player mSATA in p.50 indicated on the manual here? :

    Repair manuals

    This port is a card WWAN (cellular modem) only. Your laptop is the Intel Core 2d era generation and utilization of disks mSATA even for cache acceleration did not really catch up to the 3rd generation. The circuits to see and make use of the mSATA drive is simply not present in this laptop. I'm sorry.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Maybe you are looking for

  • Siri don't text my contacts in iOS 10

    I have a problem with my iPhone that I didn't have before the update to iOS 10. I think that it is somehow connected to the Contacts, but I can't understand that. If I go to Messages and select an existing thread, can I message someone quite easily w

  • Need driver wireless for Satellite L850 - 13M

    Hello so I bought I new laptop and I can't find a wireless driver. I tried toshibas driver but it does not work, please help me. My wireless 802.11b/g/n card is I beleve.

  • HP eprint photo app account deletion

    I just installed HP eprint app on my apple iphone 5. I added pictures and accounts of electronic mail from the homepage then realized that this is just one quick step for app to access these accounts - not really necessary. I easily removed my email

  • Gray display using the S-video out on Satellite A200-24 b

    Hello everyone I have Toshiba Satellite A200-24 b, equipped with S-video port.When I connect to my TV to always display in grayscale mode (no colors)I tried to use other cables and other TV, but always with the same problem. the cable I used is the S

  • Control valve tank with plots and twists of the water

    Hello everyone! This is my frist real project. And I am in love with this program so far!I have a little problem. Here it goes: The project of the University which has been given to us is to simulate a (entrance OPEN/CLOSED valve) water tank filling