EliteBook Folio 1020 G1 SE: BIOS update failure

Hello

After that the last notebook of WIN10 update hangs when it is connected to the docking station. HP Support Assistant suggested BIOS update fails.

my current update is M77 worm. 01.12. on-site drivers HP suggested the most recent VERSION is: 01.10. Where can I find 01.14Ap1 SP77811.exe to download?

Kind regards

Kestutis

Advertisement

Dear customer,

You can download from the link below and the update of the BIOS manually:

http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-EliteBook-Folio-1020-G1-notebook-PC/7343089/swItemId/ob-177262-1

or

http://support.HP.com/us-en/drivers/selfservice/HP-EliteBook-Folio-1020-G1-notebook-PC/7343089

Hope this helps, for other queries in response to the post and feel free to join us again

* Click on the white button on the right to say thank you Thumbs Up *.

Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

Thank you

GBL84

I'm not an employee of HP

Tags: Notebooks

Similar Questions

  • Satellite A110 - 180 PSABOE - Bios update failure

    Hello.

    I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop does not start because I think I lost the bios of programming. I test this http://laptopforums.toshiba.com/t5/General-Technology/Satellite-A215-S4747-Bios-update-failure/m-p method but the laptop will beep 3 times every 2 seconds without stopping and with black screen only. The CD-ROM unit tries to start but that's all.

    If anyone knows a separate solution that replace the motherboard, please tell me to probe it.

    Thanks for your help.

    > I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop doesn't start

    To me, it looks like the BIOS update procedure has no
    I'm afraid you have no other alternative besides contacting an ASP using m.

    It seems that the ROM module is not flashed on the correct order and the technician could try to relash Rom module with a BIOS version of crisis

    I would recommend contacting the local ASP in order to solve this problem

  • Satellite L40 - 12K - BIOS update failure

    Hi people,

    It is the second Toshiba laptop, I've managed to screw up. I don't know why, but it seems that Toshiba is especially prone to spectacular failure of BIOS.

    This laptop (Satellite L40 - 12K, short model PSL40E) has a bios made by FRIEND and Toshiba has an update on its Web site for windows that uses the tool of WinFlash.exe made by ASUS.

    The tool only works for 32-bit operating systems, and I had installed a 64-bit version of Windows, I could not pass the laptop.

    Then I thought: we will try to update the bios from MS-DOS, using a bootable flash drive!

    I went to the ASUS ftp site and downloaded the latest AFUDOS (2.41). This is a special version of the afudos FRIEND tool, specially designed for ASUS.

    I ran the tool under MS-DOS, and it will make sure the BIOS automatically confirmed that the binary file was compatible with the laptop model and automatically starts the process of flashing.

    But it crash in the phase of "flash erase". He was stuck there for HOURS, so I turned off the computer and tried to turn it back on.

    Not at all, the laptop won't turn. It does not even ANY SOUND. NO LIGHTS, NO NOISE, NO FAN, NOTHING.

    ABSOLUTELY AND COMPLETELY DEAD.

    So, there you have it. I have flashed dozens of computers (servers, laptops, workstations, etc.) in my life, and I've only had TWO failures.

    TWO of them were with Toshiba laptops. Geez, Toshiba is really the King of the failures of BIOS flashing!

    Hello

    I would never try update the Toshiba BIOS with a BIOS from other support pages for computer laptop manufacturer
    What to say; I found one from Toshiba victory of the BIOS and traditional BIOS Toshiba U.S. driver page:

    http://www.CSD.Toshiba.com

    Maybe you could try to Flash the BIOS using this version of BIOS
    If this is not possible, then only a service provider authorized Toshiba would be able to help you.

    By the way: I've had three different Toshiba notebooks: A210, U400, and now Tecra A11.
    The BIOS update has worked perfect for all series...

  • Satellite P200D-137 - suspected of BIOS update failure

    Hello

    My friend asked me to watch his old Satellite P200D of 2 days. He decides to perform the recommended Toshiba updates, after leaving the machine (plugged) and return after about an hour, he was off.

    Now switch on the machine causes a black screen with just the hard drive, fans and dvd burner, turning the power on. This being the case, I feel, it was a BIOS update he did this failed. Is it possible to recover from this at all?

    Thank you

    You know with certainty that it was done. If the BIOS update is screwed up, it can be problematic, and I'm afraid there is nothing you can do alone and without service.

  • HP Elitebook Folio 1020 G1: default

    Dear all,

    How factory default HP Eliteboook Folio 1020 G1?

    Hello

    1. Turn off the computer.

  • HP Compaq 2510p Bios update failure (stuck in an eternal loop))

    Hello

    I wonder if anyone can advise me please?

    I have a HP Compaq 2510p laptop that starts, displays this error message:

    "Your Bios did not complete the update"

    A few seconds later late in goes to the HP Invent screen. and then again the previous error message. These two screens cycle constantly and there is not only one key that I can use to access the bios settings.

    Presseing F9, F10, F12 or F-everything works. No key command does not work. Can I not boot from the internal drive, CD, USB etc.

    How can I regain access to this faulty machine to restore or repair the bios please?

    Here is a link to the images of the two alternating screens that I'm stuck:

    http://postimg.org/Gallery/2oa73dj8q/

    P.S. This thread has been moved from Windows Vista laptop - Envy, Pavilion, Presario. -Hp moderator of the Forum

    Hello:

    It seems that you have a problem similar to this model (which is basically the same model as yours, except with a 14.1 "display).

    /T5/notebook-HP-ProBook-ZBook/issue-with-BIOS-update-on-Compaq-6910p/m-p/2361103#M165620

    Your situation sounds a little more serious as mine was, because I (another one on this thread) could not get into windows, and flash back to F.17.

  • cRIO 9082 BIOS update failure

    Hallo,

    I tried to update the BIOS of a cRIO-9082, such as recommended by NOR (desciption are using the info code cRIOReboot).

    I followed the instructions, but after that the BIOS updated processes, the cRIO is not able to start more.

    So, I'm stuck. Anyone has a suggestion how I can solve this problem?

    Thanks in advance

    Stone

    --> The CRIO-9082 is RMA

    CLOSED

  • New BIOS update failure.

    I bought an alienware 17 R3 8 GB of the USA 4 months ago. I live in Turkey where there is only one technical service of Dell in total. Yesterday, I did the BIOS update. Everything was ok, I turned to the bottom of the laptop and slept. But today, I realized that my computer is dead. Thank you for this great update. I'm a regular computer user. I don't know what to do.

    If the fix above does not work, then I think your only option is to contact dell. You probably need a motherboard replacement.

  • HP ENVY 700-305no desktop PC: Bios update failure.

    Long story short (a little).

    I got a virus, is a virus really means, crypt all my files, prevents the opening of antivirus programs and redirects the downloads.

    virus survives 3 reset factory, 3 hard drive formats, and a reinstall of Windows.

    This leads me to believe that he himself got into the Bios of my computer.

    so I downloaded the latest bios for my system, in this case

    Update the BIOS HP consumer desktop PC (SSID family ROM 2AF3)

    through the Setup program on another computer, I installed the update to the bios of my USB,

    inserted in my main pc, held down the Windows and key B, while starting my computer.

    This led beeps and my computer Wrooms, 10 minutes later, nothing happened.

    I decided to start the installer directly from inside infected computer, but this resulted in a failure too.

    say that the downloaded bios is not compatible.

    What I'm asking is how I should go about the removal of the old bios (possibly) infected and reinstall it again.

    I'm not aware of a way to Flash the BIOS in Ubuntu, but it might be possible if there is a wine app in the version you have.  I have not experienced or read where someone else tried it either.  You could ask for more in the Ubuntu forums.  Don't know if it is possible to WIN PE 3.0 either.

  • Acer aspire T160 bios update failure

    While he was trying to upgrade my cpu Athlon 64 3500 T160 + to a core of 3800 + dual Athlon 64 X 2

    Thinking that I have to update the bios of R02 - A3 to b1 - R02. (downloaded from the Acer site)

    By using the program that comes with the Win Flash bios

    By following the instructions here's what happened

    Error message

    Flash block erase failure

    FWH Rom is write protected

    Make sure that locking jumper is set to the right or not.

    What is a rider of lockout and where is it located

    Can someone tell me how or if I need to update to run the new CPU

    Thanks in advance

    Sandan

    I think you should wait 60 days for version 10 of Windows to see if it can solve the problem.  10 Windows will automatically make sure you have good drivers (course to 99%).

    It is possible that he is in fact a BIOS problem.  But all the advice I would give risk possible to break your computer permanently, and I don't want to do that because there's a pretty good computer (with the exception of windows xp).

    I'm guessing Windows 10 retail copy will be cheap enough to buy.  I can't say with certainty that your computer will be in charge of windows 10, but I think it will be.

    Also, even if it has nothing to do with your current number, you can not simply exchange cpu like this safely without applying new thermal paste.  There are a few videos on youtube from the manufacturers of motherboards that show you how to clean the old thermal paste and apply new thermal paste.  Make sure that the videos that you watch come from a motherboard manufacturer, not some Joe Blow.

    And then if Windows 10 doesn't fix it, you have to decide at that point, if you want to take the risk of bricking messing with the BIOS of your computer permanently.

    I'm sure you know that Windows XP is not supported and that there is a security risk.

    Good luck!

    Edit: Here's an alternative to Windows XP that works well for older computers of XP.

    http://Lubuntu.NET/

  • Satellite M40: BIOS update failure is covered by the warranty?

    Hello

    I own a satellite M40. I had some problem with it, and tried to update the bios to see if he could he solved.
    I flashed the bios with the windows-based utility, but the shutted of the computer down without any warning.

    Now the laptop comes on only 1 or 2 and then put off the coast.

    I bought this Toshiba, 10 months ago. So, is an update of the bios failed outside the warranty?

    Thank you

    Hello Stéphane

    We can discuss your problem here, but nobody can help you. You must contact the Service partner and clarify this point. Sorry but there is nothing that you can do it alone.

    Contact them, explain the situation and see how they will take care of this case.

    Good luck!

    Incidentally: If you require addresses, you can find everything you need under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  • A60: BIOS update failure!

    I was updating the bios on my a60, the power failed right now when I try to turn it on it jst beeps four times and then turns off all help?

    Hi Steven,

    Unfortunately, your CMOS chip has now lost any BIOS that has been installed and therefore cannot boot up your laptop. Your only real option is to contact a Toshiba Service partner who will be able to install the latest BIOS for you.

    Without a BIOS of any kind on your chip CMOS you even will not be able to boot from a floppy disk or a CD.

    Kind regards

  • HP Envy 17 "touchscreen: BIOS update failure

    Today I went to the page for my desire to get updated for network drivers.  While there, I saw an update of the bios date 03/08/16 (today) and went ahead and installed it.  He said in a box she had to restart my laptop and that was the last time that my cell phone worked.  I now have a black screen and the cap lock key blinks twice, then paused and then flashes twice.  Over and over again.

    The system does not recognize HD, DVD, or USB drives.

    Is there anyway to get this system?

    Hi @campyrs52,

    Welcome to the HP Forums!

    I understand that you get a black screen trying to turn on your HP Envy 17 "laptop touch screen. I am pleased to see that for you!

    First of all, I would recommend to try to recover the BIOSand then if that doesn't work, try the steps outlined in this guide, the computer does not (Windows 10).

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    I hope that this post helps!

  • RD630 BMC BIOS update failure v16

    What didn't was not doing the update BACK to v16 v2.10 BMC, it omits to say Phase 2: timeout.

    I'm assuming that Phase 2 is the creation of the virtual USB?

    If I'm wrong please let me know.

    3. copy the BMCDOS folder previously extracted on the bootable USB of MS-DOS key.
    4. boot on the USB key on the server that requires the BMC update.
    5. run efbmc.bat to start the update BMC create a virtual USB device.

    Never went to this place. Said the Phase 2 Timeout

    6. when the application system create virtual USB device successfully and reboot the system by Ctrl + Alt + Delete.
    7. press F12 to select the USB device as the boot device to enter in BACK and enter the folder BMCDOS Bpackage.
    8 run new efbmc.bat to start the BMC update and fill it.

    Does anyone have a suggestion?

    I've already updated the system BIOS to the latest version as well as the card RAID LSI firmware.

    Thank you

    Karl

    Here are the steps I should take to get the BMC update to work.

    Completely turned off and pull power cards.
    Let stand for 10 min.
    Plug the USB bootable
    Connect the cords.
    Turn on the server.
    Press F12 to load the boot options.
    Select the USB bootable as startup option
    When the c: prompt type cd BMCDOS and press on enter
    Type efbmc and press enter
    Look AT the screen
    He doesn't go to the top, as the instructions say. The screen will repeat itself in fact twice.
    The only difference is that you will see 2 sections where it tells you if it is boot a start or two and then instructions.
    Press CTRL + ALT + DEL - restart the server
    Press F12 to load the boot options.
    Select the USB bootable as startup option
    When the c: prompt type cd BMCDOS and press on enter
    Type efbmc and press enter

    Here he now will tell you that he finds the virtual USB STICK and start download BMC updated firmware.
    This operation will last about 10 minutes, go through all of its updates and controls.
    When it's done, it will be back to the command line.

    Hope this helps others.

  • Propeller 2 BIOS update failure

    I'm updating my BIOS of helix2 of 1.80 to 1.82. However, when the computer restarts, it shows 'safe flash authentication failed' and stop the machine. BCAP is well updated. Any help?

    ... to read the log of changes to BIOS, version 1.83 is meant to avoid exactly this symptom.

Maybe you are looking for

  • How can I migrate my group with my address book lists?

    I moved from Windows XP to Ubuntu (YES!). I used TB on XP and I was able to pass my address book with all my contacts information by copying and pasting the abook.mab file. But I seem to have lost (or at least, I am currently out) the group lists tha

  • Safari can't connect automatically in Gmail

    Hello I just got a new machine (OS X El Capitan v.10.11.5) to work a few days ago, and Safari (v.9.1.1) allows me to stay connected to my Gmail account, unless I connect explicitly out of it before you quit the application.  Other people rarely use m

  • Satellite A500 - 19 X - which is the maximum supported RAM?

    Hello I have a Toshiba Satellite A500 - 19 X with Windows 7 64 bit Home Premium edition. It came with 4 GB DDR3 1066 MHZ RAM. Can anyone let me know the maximum supported RAM for this hardware configuration and OS. Kind regardsVivek

  • Satellite L850 - indicator wireless is not off

    Hello I have the Satellite L850Windows® 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) When I switch the lan wireless off (using f12) the indicator doesn't turn off wireless! I have not found "the indicator wireless settings" on my syste

  • How to voltage ramp

    Hi all I am a beginner on LabView and have written a program to generate the next ramp below. Using the graph, it seems to work, however when I plug a scope or a voltmeter to the map, I see no output. Why?