EliteDisplay S230tm: Touch EliteDisplay S230tm w / 10 Windows

I have problems with activation correctly touch on my new S230tm operates on 64-bit Windows 10.

When the computer is restarted, it takes a while until the key is turned on - random - sometimes it is sometimes hours, minutes, or even a day. But once the contact starts to work, it works flawlesly day a week... until the computer is restarted again. After that, it's the same wait-and-test procedure.

Windows recognizes as a full touchscreen monitor screen and monitor displays properly in the device (including the HID device to the touch monitor) Manager.

I've updated the driver to the most recent available.

Tried on two separate machines (two 10 64-bit windows) - same question.

Any ideas? This is getting really frustrating...

To close this topic - it was a hardware issue touch, like, day 1.

Fix, they changed the electronic system and now it works.

Hope it lasts

Tags: HP Desktops

Similar Questions

  • LabVIEW Touch Panel Module | ActiveX controls | Windows CE

    Hello

    I am trying to determine if it is possible to use with the LabVIEW Touch Panel Module ActiveX controls.

    There is no ActiveX container on the pallet in the Touch Panel Module and I can't find any mention of ActiveX controls in the manual of touch panel.  So, I'm gathering that ActiveX is NOT supported on LabVIEW Touch Panel running on Windows Embedded CE.

    Can anyone confirm if the ActiveX controls are supported on the LabVIEW Touch Panel Module?

    Thank you

    Steve

    Hi, unfortunately they are not (see this link). For more information, see the Manualand the listof the supported features.

  • IPod Touch 4 G Sync problem Windows XP SP 3

    My iPod Touch 4 G does not sync with my iTunes library. iTunes freezes and no longer just by showing that it is the first song synchronization. I have Windows XP Home Edition service pack 3, iTunes 10.4.1 and iOS 4.3.5 on my iPod. I have to burn my iTunes library to a CD and synchronize it with my iPod on another computer. My home PC is about 6 years but short grand. iTunes works great, can listen and download anything on my PC. Just can't sync with my iPod. I've tried everything. I think that maybe the USB issue someone else mentioned but I don't know. Maybe, I need to install a USB card that is not connected to my motherboard.

    Any suggestions?

    Hello Baloch,

    Here is a link to the forum of iPhonecommunity from apple.

    https://discussions.Apple.com/community/iPhone?CategoryID=201

    Let us know.

    Best regards

    Matthew_Ha

  • IPod Touch 3 installation problems. Windows XP thinks that it is a camera in all ports. (Music/hardware problems)

    I click on setup for itunes and the intall process occurs and then it gets to a point and a window opens and says that I have to install the software for the DVD/CD drive can work. In the Panel, I clicked on sounds and Audio devices, click on hardware and off the player, still does not work.  I do a search for software and a message shows a digital camera, that is what I have.  When I click to close the window of the hardware, another one appears just after. Then the installation process continues, but once done, I get a message that errors have occurred in the facility. I could send an album to itunes library, but I couldn't see where to add the music to the Ipod Touch 3.  I think that there should be a "Deputy" which I don't see. Maybe the errors. I did it on my other computer a long time ago, but this computer no longer works, also with XP, no problem at this time here to operate.

    I went to Microsoft after clicking in Control Panel - portable multimedia devices - and he says that the my Ipod is not need of software that it is ready to go.

    I tried with and without the Ipod ports in USB 2.0 ports and also tried to restart the computer with connected.  When I first plug it into a port, it makes the sound "recognizes the new hardware' and it says IPOD.  It appears in the 'Safely remove' icon in the lower tray right, it's another icon, not sure what it is.  I just plugged it before submitting this and no message "recognizes the new hardware" appears and no icon in the status bar. I can't hear the sound it makes with new hardware, but then he does sound like I have that I have not disconnected.

    Thank you

    Hi LIM1022,

    You can check if the following Apple article helps.

    iPod not recognized in 'My computer' and in iTunes for Windows

  • Laptop not touch Inspiron 5000 with Microsoft Windows 10

    I am new to this forum and was led by a nice lady from the Dell Community.

    I want to buy a laptop 'Inspiron 17 5000 series No-Touch', but I would buy it with the next Microsoft Windows 10.

    Anyone happen to know the approximate date when this may be available and what impact this may have on the cost of the unit?

    Thanks in advance for your help.

    ~ Purrington

    Hi Purrington,

    Please follow this link.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Windows-10-release-date/3d4a3b8e-9E59-40EC-8268-a4cde9e772a7

  • Touch pad to turn off Windows 7 when the mouse remotely installed as I could in Windows XP

    In Windows XP, I could go to control pannel, mouse and click to Disable Touchpad when another mouse was attached.  It would be automatically on the touch pad if no mouse was attached USB.  I couldn't locate any method or the answer that allowed a change of software touchpad in Windows 7.

    I had an old Dell D820, installed Win7 and couldn't find a way to disable the touchpad and keys/stick.  Based on other suggestions, I went to the Dell website and downloaded the drivers Vista (Win7 drivers not available).  As soon as he installed and rebooted, I had an icon in the Sys Tray (by the clock) that I could then select a setting to turn off when the external mouse connected.  So for those who said it is a pilot thing, I agree with them.

  • You must touch the ability to run Windows 10 screen?

    Original title: touchscreen

    My laptop runs on Windows 7 Home Premium, without a touchscreen. I need touchscreen for Windows 10?

    No you don't need a touch screen for all the operating systems Windows, and Windows 10 is not differently.

  • Link to Touch - pad Device Driver download Windows 7 Enterprise required Settings

    Touch-pad Device Driver download link W7 Enterprise required Settings.

    The driver depends on your hardware device and PC manufacturer.

    You try to run Windows Update and install all updates or check Action Center in Control Panel and see if the driver is recommended here or visit your PC manufacturer's support and download and install it.

  • IPod touch recognized as camera in windows 7

    I recently bought a new Dell laptop with windows 7 and a new ipod touch. At first, when I plugged the ipod in, itunes would recognize it instantly and I would be able to sync. Now, however, every time I plug the ipod in, it recharges but the computer recognize it as a camera and itunes does not detect. I have reset the ipod, followed the steps on the apple support, restarted the service, reinstalled usb and reinstalled itunes and nothing works! I plugged it in another laptop and itunes recognizes it, but not in my computer. Help, please

    Hello

    You did changes to the computer before the show?
    Method 1:
    You can try the troubleshooting tool and check:
    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
    Method 2:
    You can run the fixit of the link and check mentioned below:
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/en-us
    Method 3:
    Try the steps in the following article and check:
    IPod: Appears in Windows but not in iTunes
    http://support.Apple.com/kb/TS1363
    If the foregoing assistance not try to post the question on the Apple support forums:
    http://www.Apple.com/support/
  • Disable the touch screen for a laptop Windows 8?

    I have a Dell XPS L702x infamous Ghost by clicking on issues where the touch screen randomly 'clicks' on arbitrary areas of the screen (mine seems to be in the lower right corner, often minimize all my open windows or opening calendar) and through the upgrade to Windows 8, it seems a former N-Trig driver who disappeared I would disable the touch screen. Now, I have no way to disable the touch screen, and while Google suggested release "Use your finger as input device" under the pen and touch, I don't even have this available to UN-click box on!

    So: How can I disable the touch screen on my laptop or y at - it a program that can do for me? I am indifferent in fact using the touchscreen - I'm more concerned with the ability to functionally use my laptop without sporadic clicks on my screen.
    Thank you.

    I had the same problem with XPS 17 my wife.    I needed to restore basic functionality so that disabling the touch screen was acceptable.     However, unlike samie (but like you) I didn't "Use your finger as input" option in the control panel.

    I tried to disable the device N-Trig driver in Device Manager, but the pilot did not appear to have be properly installed (after the upgrade from win7)

    I went on the N-Trig (http://www.n-trig.com/Content.aspx?Page=Downloads_Drivers) driver download site and download the new drivers for windows 8 (I have the feeling that they weren't here last week).

    I then when options "Device Manager" on the "Hardware and Sound" page of the control panel.

    In the Device Manager screen, I saw a node N-trig DuoSense digitizers with several below subnode (before dev driver install it there was only one).

    I right mouse button on the element at the top, with a name that ends by "between the roots" and select "disable."

    This touch screen successfully disabled.

    Pity to lose the touch screen, but my wife does not use it and I was in danger of my life, as it was.

  • Touch screen works is not windows 8

    Original title: activation touch screen windows 8

    I have the 27 '' dell all in one, my touch screen does not respond to TOUCH. How do touch return?

    I basically just turned off the computer and then on and it has been working fine since.  Hope you can find a solution.

  • Want my touch screen to operate in Windows 8

    I recently bought a bridge tap all in one computer (model #ZX4351).  I installed Windows 8 on it and now disabled the touchscreen in function.  Please help me understand what's going on so that I can have the touch works again, I don't want to take the Windows 8 back out of it.

    Sincerely

    Lady Laresa

    I recently bought a bridge tap all in one computer (model #ZX4351).  I installed Windows 8 on it and now disabled the touchscreen in function.  Please help me understand what's going on so that I can have the touch works again, I don't want to take the Windows 8 back out of it.

    Contact the manufacturer of the tactile device (bridge?) and ask them if this device is supported under Windows 8, and if so, where to get the drivers for it.

  • My new Wacom Intuos Pro is having problems of fluidity of multi-touch in Photoshop and throughout windows (it's stuttery to rotate and zoom!)!

    Hi I have literally just back a few hours before with my brand new Pro Intuos of Wacom support. I put it all this (installed on drums) and plugged in the USB cable and uninstalled my previous "Wacom Bambo Fun Pen and Touch" restarted my computer and installed the latest drivers Intuos wacom site Pro.

    Now, all the gestures in Photoshop 2015.1 CC are not smooth or fluid with it, just like my "Bambo Fun Pen and Touch". In particular, the tool rotation, (rotates in about 20 degree increments)-I think it's something to do with the Tablet, triggering standard keyboard shortcuts for reach a false multi touch. and is not how it's supposed to be! I saw it on youtube.

    I think (after scouring the mountains of websites and forums) that it's something to do with windows 10 'precision Touchpad' or something but I can't seem to find anything much in that no matter what? Zoom even microsoft edge is very irregular and is designed to be smooth with a touchpad !

    That's what my settings of the mouse and touchpad tell below. There is nothing to touch, nor in any system of pen and touch of the dialog boxes. option is also not multi touch in photoshop 2015.1 CC

    I tried calling the wacom to Australia, but they aren't there and I really need this problem.

    Could someone help me please? I just want to enjoy my new product thank you!

    My specs are:

    4770 K I7

    NVIDIA GTX 780ti - drivers latest

    Samsung 840 Pro - latest Firmware

    2014 Edition Razer Naga gaming mouse

    Razer Blackwidow Gaming Keyboard 2014 edition

    Interface Audio Scarlet 2i2

    ASUS PB278Q

    Windows 10 Pro x 64 - latest patches

    Wacom.PNG

    Hi, I found that earlier lol.

    I think it might be something todo with Photoshop 2015.1 CC not supporting Multi Touch more like an (experimental feature?) or it's just not recognize my Tablet! Edit: because Corel Painter multi-touch works great and smooth!

    I just installed Corel Painter 2016 and activated "Multi-touch", submenu "Tablet" and this is what you see (below):

    New: I just tried to move from the first (WinTab) radiobox to RTS and restarted and multitouch work more at all! -When previously it worked perfectly!

    I think it is a bug with Photoshop 2015.1 todo and is the new integration of ink system Windows!

    Let me know what you think Akash!

    I'll also try Photoshop CC 2014 and enable Multitouch support in the "experimental features" collum.

    Thank you!

  • The touch screen stop working on Windows 8

    Original title: touchscreen

    I have a problem with my stylus and touchscreen. My drivers on my computer keep going wrong or something and it disables my touchscreen, solutions?

    I recently faced this problem.

    Tried to resolve the issue. Found a way.

    Go into the bios settings (press F8 when you turn on)

    This takes you into bios, where your touchscreen should work. (no changes)

    Restart windows. now in Device Manager, you can find the input device and activate it.

    It reconnects touchscreen!

  • [U430 Touch] ISO recovery OEM of Windows 8

    I wiped my hard drive completely. Stupid, I know.

    I would need if another owner of U430Touch could do me the favor to make an Iso from the recovery partition and download somewhere (Mega, other).

    I tried to enter the web of Lenovo to a recovery DVD, but the site still appears as empty, no content.

    I think, the better, faster option now is I get it directly from another user.

    I know, maybe it's a job, but I would be happy if you could help me on this issue.

    demalmar wrote:

    I'm already downloading. I'll try to find a way to store all my docs and maybe tomorrow I can install it. Thanks a lot for your help.

    BTW. This installationi will create a recovery partition? It will not, right?

    It will create a recovery for the only (Win 8.1) operating system partition. If you are referring to the partitions OneKey recovery that they will not be created. You need the Lenovo recovery disk sets (if they exist for your model).

Maybe you are looking for