EMagic Logic Control has stopped working

I have havn´t been using my Emagic Logic Control for a while and as I wantted to use it it didn't work any more.

EMagic Logic Control doesn´t appear in the configuration of logic controller, but the Jog Wheel works?

Mac Pro early 2012

Unitor 8

RME Fireface 800

EMagic Logic Control - v 2.1.2

Logic Control XT eMagic

OSX 10.11.6 (El Capitan)

9.1.8 logic (64-bit)

I tried on:

trashing the prefs and controller logic Surface prefs, then restart

2 different midi interfaces

different midi cables

different supplies

tried to re - install the 1.02 update firmware with no success

also, another computer running OSX 10.11.6 and logic 9.1.8 (64-bit)

Switch between mode Mackie and logic

When I turn on Emagic Logic Control, it passes through the calibration Fader without problem, but doesn´t go further and sees no logic, but Logic Control XT Emagic is considered by the logic.

It seems that the midi input does not work.

You have any ideas? Maybe it s a hardware failure and I should try to find spare parts?

Well cordially

Henning

EMagic as a society has not existed for so long now and their products have not been updated for so long, I think that it is no longer compatible.  He did stop working with an upgrade of software of any kind?  Yes, it's going to be difficult with this type of old hardware.  I would have the Unit checked out by someone who knows how to check what works and doesn't work inside.

Tags: Professional Applications

Similar Questions

  • 4th gen Siri remote control has stopped working

    I had my 4th Gen Apple TV since November 2015. Last week noted that the TV shows and movies are glitching but if I do a reboot on the apple TV everything works fine again and have to do it every day.

    Today the Apple TV remote was working fine all day then when a finished film went to for use and there was flashing reaction flights when I pressed one of the buttons. At first, thinking it was maybe needing a charge on the charger. A few hours later I returned to use the remote and it still doesn't work do not at all. I went into the Apple TV menu using a remote old money I thought that I would check how much fresh had the remote and I went for the remote controls and devices > BlueTooth remote control is more is listed and the dial connection was but would not connect to the remote control?

    I tried to reboot that fixed the glitching to see if maybe he would take the remote, but still nothing. Does anyone else have this problem?

    Try to re-twinning of Siri remote:http://help.apple.com/appletv/#/atvbc9953e63

  • "Windows Explorer has stopped working" if I open Control Panel

    Guys, could someone help me please?

    When I open the Control Panel, it says "Windows Explorer has stopped working" and then it restarts Windows Explorer. When I right click on any folder it says "recording of the UI language is not valid" 5 times and for a split second, it says "Corrupted registry" then it works. But I am unable to use the control panel.

    I have Windows Vista home premium and Norton Antivirus.

    Can someone help me please?

    Hello

    The error message says something about corrupt registry.
    So, it seems that this issue would be related to incorrect or damaged registry entries.

    If the registry is damaged, your operating system will not work as it should and can feel such or similar problems.

    I m using the CCLeaner to clean the registry and other system files.
    It s a free tool and you should try it.

    If this does not work and if you notice the same question so I would recommend reinstalling the OS using the Toshiba recovery disc.
    In most cases this will help you fix this registry

  • Pavilion g4: apllication of Catalyst Control Center: Host has stopped working...

    I get a pop-up window saying: "Catalyst control centre: host application has stopped working.". "

    It is written in the body of the box: "a problem caused blocking program woring correctly. Windiows will close the program and notify you if there is a solution. "

    I can't connect my games online as well. Please give a good solution

    Hello @Sailorswrath ,

    Thank you for your inquiry.

    What is your exact model of the Pavilion G4 you have?

    How can I find my model number or product number?

    There was a recent change before that happened?

    Have you tried running MS difficulty?

    Have you checked against viruses and malware?

    Here is a link to help test for a hardware failure.

    HP Notebook PC - detection of hardware failures (Windows 7, Vista)

    If it is a recent change, you can perform a restore to a well known date?

    HP Notebook PC - using Microsoft System Restore

    Good luck!

  • Want to m6: Catalyst Control Centre: host application has stopped working

    Whenever I start my computer, I get the following message every time that a few months:

    "Catalyst Control Centre: host application has stopped working".

    A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

    Please how can I get rid of this or get whatever the problem is solved?

    Thank you.

    Hello

    Try to use Recovery Manager to reinstall your original graphic AMD software package - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

    Recovery Manager - Windows 8.

    Recovery Manager - Windows 7

    After reinstalling, restart the laptop.

    Kind regards

    DP - K

  • Issue of satellite A300 Catalyst Control Centre - host application has stopped working

    At startup, and whenever I try to open the Catalyst Control Center, Windows displays the error message ' Catalyst Control Centre: host application has stopped working ".

    Has anyone else with similar problems.
    I tried to reinstall the drivers on the toshiba site, and install the new drivers on the ATI site and all I could think about. Given that the two pilots do not work im not able to exceed the resolution 1024 x 768.

    Any suggestions?

    Hello

    I googled for this error message and found many people having this problem.
    It s not related to the laptop, but for the driver
    Who knows why.

    In any case, in most cases the people solved this problem by the new driver Catalyst installation.
    You should do this;

    -upgrade your Vista to the last State
    -remove the old system catalyst
    remove/uninstall the graphics since the device manager driver
    -Restart the computer and reinstall the driver and catalyst

    Should work!

  • Catalyst Control Center host Application has stopped working

    I get this promt twice when I start the computer. I tried something that has been recommended who was clicking on tools in CCleaner and see if it was on the list that he was. I deleted it then as recommended but the guests still appear.

    Check these related discussions

  • Catalyst Control Center window will appear to indicate that the program has stopped working properly

    Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.

    Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx

    Jim

  • Catalyst Control Centre: host application has stopped working Windows xp prefessional

    Catalyst Control Centre: host application has stopped working Windows xp prefessional. ididnt get what do that means.

    Catalyst Control Center is a Radeon video card component. I recommend that you go into Add/Remove programs and uninstall. Once you have uninstalled it click HERE to download and enable the parser should automatically detect and install the appropriate driver. If the installation of the latest version does not resolve the problem, you should scan your computer for malware using Malwarebytes. Make sure that you update the parser prior to analysis.

  • whenever I try to go into my control panel or computer I get a message that windows Explorer has stopped working and she said then it restarts, but I can access my computer

    Help!

    Whenever I'm trying to go in my computer or control panel, I get a message that windows Explorer has stopped working.  He then says that we find a solution, and the message disappears.  I can't yet get into my files computer or control panel.

    Whenever I'm trying to go in my computer or control panel, I get a message that windows Explorer has stopped working.  He then says that we find a solution, and the message disappears.  I can't yet get into my files computer or control panel.

    Why you are posting in the forum, IE?  Maybe the reason why you try to use the CP is to enter Internet Options?  If so, you can do it without the help of Windows Explorer (at least on your operating system) starting (using the Task Manager if necessary): control.exe inetcpl.cpl

    Otherwise what your problem probably means is that you have added something new to the root of the control panel which is not compatible with your OS, causing thus the Windows Explorer (not IE) crashing.  In this case, the same way you could get in Add Remove programs without involving Windows Explorer by starting: control.exe appwiz.cpl

    You can get help more informed by post on a forum that specializes in performance and Maintenance of your operating system.

    Good luck

    Robert Aldwinckle
    ---

  • Process of hand Control Center has stopped working

    I get a Microsoft Windows error message that reads; Process of hand Control Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. This happens when I start or restart my computer and when I try to scan using a printer Brother MFC-J5910DW new. My operating system is Vista 64 bit.

    I thought about it. So, for anyone else who has this problem, go to your C: Start menu, computer disc, Windows, System 32 folder, drag all the folders for the printers you use over your desktop. It worked for me. Hope this works for you.

  • Message says 'catalyst control center has stopped working ".

    Can not find documents, or stay on the internet.   Is there something I can do?

    Hello

    It's to do with your graphics drivers.

    Read this thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Catalyst-Control-Center-has-stopped-working-host/08990353-F28D-4DDB-87b5-856be1ba3da5

    See you soon.

  • using win vista sp2 64-bit overpriced home, the catalyst control center host application has stopped working

    Using windows VISTA Home overcharging sp2 64-bit, the catalyst control center host application has stopped working

    Hello

    You will need to download the correct drivers for the graphics card. You can also contact the manufacturer for assistance on this issue.

    Support for drivers &

    http://support.AMD.com/us/pages/AMDSupportHub.aspx

  • Volume control applet has stopped working

    Whenever I click on the Volume icon in the system tray, it gives me a message "volume control applet has stopped working. Windows can check online for a solution to this problem. "

    I have a Toshiba Satellite P105-S6167 computer.

    Help, please!

    Hey Prabzz,

    Thank you for using answers Forum.

    You can check that Toshiba is not any volume control software installed that may be in conflict with it. You can also run the System File Checker to locate missing or corrupt files that could cause this problem.

    To run the System File Checker tool, follow these steps:

    1. click on Start

    Collapse this includes this image and then type cmd in the Start Search box.

    2 right-click cmd in the programs list and then click run as administrator.

    3. If you are prompted for an administrator password or a confirmation, type your password or click continue

    4. at the command prompt, the following line, and then press ENTER:

    sfc/scannow

    Here is the link to the article:

    http://support.Microsoft.com/default.aspx/KB/936212

    Give that a try and let us know how it works.

    ~ Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Catalyst Control Centre: host application has stopped working

    What does the error message ' Catalyst Control Centre: host application has stopped working "means and how to fix it?

    Maybe it's the solution you're looking for.

    Recently, I removed the malware recovery Vista of another of our mobile phones of the company Center. It installed ATI graphics card. This malware cache most of the files on the PC to try to trick into thinking that your PC is really damaged as he reports. Remove malware does not cancel the hidden aspects. In Vista, the folder of' your profile name (usually the owner) " c:\Users\ contains the subdirectory AppData required by the Catalyst Control Center to access in order to operate. If this directory is hidden, CCC cannot locate the files needed to launch. To resolve this problem, I use the following steps.

    Go to c:\ and right-click on the users. Select Properties. On the general tab, look down to the hidden selection. If not, there is a box to tick in the box, place a check mark. Hit apply, select Yes to apply to all subdirectories. If you click ok, you may notice that he disappeared in the pane on the right, once it ends. It should always appear in the tree view on the left. Right click on it again. This time, remove the check mark and apply to all subdirectories. Once it's over, your files in the Users directory should reappear and Catalyst Control Center should function normally again. It worked in all cases that I have hitherto encounterd. I hope this works for you as well...

Maybe you are looking for

  • iTunes 10 Windows will not let me my backup of archives

    While trying to archive the backup copy of my iPhone to iTunes in Windows 10, iTunes won't let me check when I followed the instructions say right click on the backup file in the preferences > devices.  Help!

  • Local Mac malfunction file sharing

    I am using local file sharing in my house for a good 8 years. I have 2 older iMacs (white 2006, 2007 aluminum) and a new late 2015 5 k iMac that I bought a few days ago. For some reason any local file sharing has started to malfunction: I no 1 wifi a

  • Vizard of missing Toshiba Recovery

    Hello! I have a problem. My cell phone was in the service of repair and so they have restored Windows only, but the rest is deleted. Even the office license and now I want to put computer to factory settings. There is no recovery toshiba vizard. I un

  • Highlight one several files at the same time

    I would like to highlight several files to delete at the same time. Through Windows highlight you or click on the first file with the mouse and click on the last file and everything in-between becomes highlighted for deletion. Is there a way to do th

  • HP Pavilion g6-2237us: can I install an i5-450 m chip in this machine

    I got another laptop that I gave my daughter and in less then 2 weeks she had forgotten on top of his car and left.  Long story short, the laptop was destroyed, but I have recovered all I can get out of it and hoped that I could put this i5 chip in m