Email removal of blackBerry on the BB and laptops Smartphones
HI - my boss just got a BB Curve 8330 & wondered about one of the features with the help of one of his buddies. Our company uses Internet hosted email we have download in Outlook as a POP3. A setting on Outlook has been defined for a copy of the email is stored on the hosted server. This allows the BB download email on your handheld.
Apparently an e-mail setting is on the BB which can remove the two messages of the BB & the PC?
Since that he has downloaded the message to his eyes, when he chooses to remove both of the BB, this will remove the message on our hosted mail server or its prospects, both?
He needs to sync something or use the desktop software?
Thanks in advance.
Yes the IMAP is considered a better Protocol on POP3. It's just a matter of talking to Outlook to the server to check the status of ' / unread / delete "message, you can get in a typical setup exchage, no POP3, IMAP I will do the job
Tags: BlackBerry Smartphones
Similar Questions
-
Is it possible to remove pictures/videos from the iphone and have yet to back them up in the iCloud?
At the moment the iCloud synchronizes only with what is already on my iPhone.
This article should help you remove photos from my photo - Apple Support stream
-
My email on my iPad 2 (IOS 8.4.1) froze last night on a blank page I was trying to send a few photos. I know I get emails that I can hear the ping and my email application shows that I have two new. I tried to put this off, then restart, but nothing changes. When I type my email application it goes to the blank page and after a few seconds goes back to my home page. I'm leaving on a trip to Europe at the moment I'm in a bit of panic. Any help will be greatly appreciated.
You tried to close the Mail application via the taskbar of the iPad: force an app to close on your iPhone, iPad or iPod touch - Apple Support ?
-
Original title: Out of Memory Box
I tried to add/remove stuff installed on the computer, and every time I try a "memory" box keeps popping up. What is the cause of this and how do I manage it?
Hello S.M.R.TJakeman,
In addition to the response of ramata, the link provided assistance by looking at how many programs you have running. This could help solve, but if not please let us know what are the specifications of your computer. Specifically the memory!
Also, please let us know what anti-virus software you use and when you ran last analysis complete. Did you run any malware/spyware removal software?
"System Properties"
Click on 'start '.
Right click on "computer".
Click 'properties '.
Click on "Général" (XP).
View the information on your screen. You are now redirected to the specifications of the complete system of your computer. You can see the processor speed, processor type, system type, the amount of RAM installed and more. When you are finished, click the 'X' box to close the System Properties window.
Microsoft Answers: The malware removal
Please let us know status.
-
I get to level my windows in Windows 7 PC. My old PC had CS6, Bridge, and Lightroom installed 5.7. I want to remove all three of the old and install the new. How do I do that?
First of all make sure you disable / disconnect in order to save the number of activations.
Click the help menu, and then select disable / disconnect .
Then you can uninstall in Control Panel uninstall process as normal.
Later, you can download and install CS 6 app link below:
-
2 How to remove an element from the tree and the database block tree?
Hello
2 How to remove an element from the tree and the database block tree?
Kind regards
Abdetu...The problem is caused by not sending forms is not a VALIDATION of the database because he thinks that there is no changes to save.
Forms does know that changes to the data block, he does not know the changes made by the PLSQL INSERT, UPDATE, DELETE calls and procedure.
Try to remove the line to block, rather than using a DELETION like that...
go_block ('INSP_EQUIPMENT_TYPE');if form_success then do_key ('DELETE_RECORD');end if;
If you wish to continue using your original DELETE instead of my change above code, you can use different techniques to force forms to issue the COMMIT to the database, including this one...
DELETE ... FORMS_DDL ('COMMIT');
Be careful... This will be the VALIDATION of the database, but the changes to the data block will not be sent to the database!
I posted a few other ways to issue a VALIDATION of forms here
www.seeristic.com/Forum_Posts/Forms_COMMIT.txt -
I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?
Hi John,.
I'm unable to install the second copy LR6. I get the windows with the message that I've exceeded the number of licenses.
I did the following:
On the desktop computer:
I registered
Uninstalled LR
Re-installed LR
On laptop:
I registered
Uninstalled LR
Re-installed LR
What's wrong?
Concerning
Dieter Kolonko
Von: John T Smith
Gesendet: Mittwoch, 19. Juni 2015 21:02
Year: Kolonko Dieter
Vacancies: I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?
I bought LR 6 and installed on the desktop and laptop. Now desktop mainboard has failed and hat to be replaced wit consequence to reinstall Windows 7 and 6 LR. Now, I exceed the number of licenses. Should I still buy LR8?
created by John T Smith https://forums.adobe.com/people/JohnTSmith > in download, full installation, commissioning - see the discussion of https://forums.adobe.com/message/7667228#7667228>
-
Email removal of blackBerry Smartphones
I am a new user, connection through BES. I store e-mail that I want in outlook in my personal folders on my desk and do not want to keep so many messages on my Blackberry. How do I remove them or specify only keep for say 5-10 days. I'm on Verizon (if that makes a difference).
Also several times when I open messages, I see the oldest FIRST and must scroll through hundreds to get to my current message. SOOOO aggravating. Thanks for any help.
Go to the Inbox of BlackBerry. Press menu, select options, select general options, set the option "keep messages" for the duration you prefer.
I'm not aware of an option to sort the blackberry by the oldest messages first. If you are not at the top of the list when you go into your blackberry Inbox, you can press "T" to jump to the top of the list and 'B' to jump to the bottom of the list.
-
My Internet service provider said that it is not a problem of them
Can I assume that the e-mail program, you did not mention is Outlook Express?
You have apparent dbx file corruption.
Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
With OE closed, find the DBX files for the items in the Outbox and sent and delete them. New ones will be created automatically when you open OE.
After you're done, followed by compacting your folders manually while working * off * and do it often.
Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
General precautions for Outlook Express:
Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
Information on the maximum size of the .dbx files that are used by Outlook Express:
http://support.Microsoft.com/?kbid=903095Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htmNote that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
Compact often as specified above.
And backup often.
Outlook Express Quick Backup (OEQB Freeware)
http://www.oehelp.com/OEBackup/default.aspx -
Remove a switch in the stack and put on another battery, it will work
Hello!
I have two different batteries, in two different placeLocation01
STack01-> with dial-up dell PC8164-01 and 02-PC8164Location02
STack02-> with dell switched PC8164-03 and 04-PC8164On all switches, I use the same ports for stacking
Now, assume that this scenario:
If the switch PC8164-02, which is a member of stack01 located in Location01 is damaged and I remove switch 04-PC8164 of location02 and connect to location01, it will be normally function and configuration of the reception of the other switch in battery PC8164-01, and he will be a Member?Kind regards!
Yes, the switch will operate normally. When the switch is connected to the other battery it will see that there is already a main switch, since it has only 2 switches, it will become the cutout of backup, synchronization configuration and become an active member of the stack.
You will need to ensure that all switches are on the same firmware.
-
I just bought a Blackberry curve 9360 and the problem is the PIN & IMEI that appears on the phone is:
IMEI: 3 * 5899
PIN: 2 * C3
but the IMEI sticker stuck to the back of the battery and as well as on the boxshows:
IMEI: 357965042073448
PIN: 2 * 4F
It's really frustrating. Also I can't use the BIS plan that is already activated, because whenever I ask you to join the host routing table, it returns with none.
I use Airtel India as my carrier. Help, please.
You already posted this. Return the unit where you bought it. It's been tampered with.
-
How to remove a folder in the sidebar and drag it to the desktop
I've been working wth a folder and in any way, he got pinned to the sidebar. I tried right clicking and dragging. However, the ability to detach it and move it to the desktop is not available.
Please help because I'm desperate to get work that I need in the folder.
Thank you.
Hello
1. are you referring to the taskbar of Windows or the Windows Sidebar?
2 are you able to access the folder and all its contents?
I suggest to follow the article below troubleshooting steps and check to see if that fixes the problem on your computer.
Customize Windows Sidebar
http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Sidebar
Send us a screenshot.
How i: post a screen shot on this forum?
Hope this information helps you.
-
Color space removed when exporting with the "copyright and Contact Details Only"
Hello
When looking at why my JPGs looked more saturated in IE11 I finally discovered that besides all the metadata when you export, delete the tag of color space causing the major problems of color in IE11 and probably other browsers. I think it's a serious problem in the program and must be addressed. I use LR 5.6
Sorry everyone. I just tested again and I put a good idea 2 and 2 together to come up with the wrong answer
-
How to remove an instance on the timeline and symbol
I use Flash Professional CC 2014 on a Mac of Yosemite. I am a novice in Flash.
I want to disappear from the oval and photo, then fade again. Any help would be greatly appreciated... Thanks in advance!
-Gordie
It's a fairly simple process. Make sure that everything you want to fade out is on its own layer. Select the layer on the image you want to boot and press F6. This will create a keyframe. Then go to the last image in the frame reange and create another keyframe (F6) finally go to the place you want it to fade out and select this image and also hit F6. Now click again on the image central key and right-click on it, then select Classic Tween. From there, you can go to the properties box that should be on the right side here. If not you can go to Windows > properties and the box will display. Once in the properties box simply select color and then select Alpha from the drop-down and drag the slider to 0%. Now when you play the timeline (Enter), he will start full 100%, melted and melted and then back again. If you want to keep the full 100% for a little image, then fade then fade toward the top and then stay that way you create two keyframes for as long as you want the pic to stay 100% and THEN create your picture-key to activate the alpha to 0% I hope this helps! for what it's worth, you can find plenty of tutorials here: learn Flash | Hexjibber
-
BlackBerry from AT &; T and Verizon smartphones
Hello room:
This is my first post, and I have a small question. I am currently a Blackberry "BOLD" user and watching AT & t to Verizon. If I do a switch, I would go directly on the Blackberry Storm.
However, before making the switch, can you let me know if 1) the storm is a decent and 2) is Verizon phone a decent network?
Thanks for your help.
I'm a loyal customer of AT & T for a very long time, but in my house, the service is very injury, so I just made the change to Verizon and have excellent coverage at home. I also noticed that I have quite a few less calls interrupted while you are driving.
So far, the storm has been a good phone with the likely exception of autonomy. I think that these new phones with screen touch and all the bells and whistles require much more battery that most will last about 2-3 days with average use before having to charge it. Last week after I fixed my 3G, research problem, I was on average from 07:00 to 21:00 with 40% battery life left in the evening. Yesterday I made an another battery pull and today I went from 08:00 to 21:00 with about 85% life left. Don't use it as much but will monitor it and post if something changes.
If I helped somehow, please click my congratulations. Thank you.
Maybe you are looking for
-
Installed firefox 31 and now I can't seem to our oracle enterprise manager URL 12 c
Hello Monday, I've upgraded to Firefox 31 and now I can not connect to our site Web of Oracle Enterprise Manager Cloud Control. I get the following error message: The secure connection failed An error occurred during a connection to lmoemxs101q.atl2.
-
Satellite U200 - 161 Fingerprint software does not not with IE7
Looks like the ease of fingerprint to the record of the passwords working more once installed ie7 (final).All I have this problem or is it just me? Thank youNick
-
HD DVD on the Satellite X 200 - will not play with vista 64-bit
I installed vista 64 bit on my x 200, thought I had everything working, but when I went to install the Toshiba HD DVD software, I get a message saying: it cannot be installed on this computer. I tried some third party decoders, and none of them has m
-
How to get mydaq recognize px309 pressure transducer % 3F
It has only 3 wires instead of the usual 4. They are black, red and white and negative excitement, positive excitement and signal respectively. I plugged the black wires and red to an external power supply, the white wire to the myDAQ HAVE. Then I we
-
Failure of scanner HP Officejet 4500 G510n-z
Hey all! Well, just got this printer from a friend because of this problem and I am determined to fix. To turn on the machine, I get a failure message scan. I downloaded and ran the Hp solution test tool and an error "Unable to communicate with the p