Emails lost after the updates installed

Similar Questions

• Blue screen of death after the update installed at startup upward.

  I have windows xp sp3 after installed updates don't know which ones, because the installed when I stop and 52 of them there I now get a blue screen of death which says:

  Stop: c000007b {bad image}

  The application or DLL? \c:\windows\system32\winsrv.dll is not a valid windows image. Please check this against your installation diskette.

  I can't go to the safe mode get the same error and same with the last known good configuration. I can't even to safe mode command prompt, system, or debug mode recovery still giving me the same error. I repaired windows 3 times already and the same thing happens each time after that some update that I don't know he messes all this. Give me advice. I have antivirus Iola system mechanic. I think just to wipe the entire disk and do a clean install if you do not have anything else to tell me I'll do it, but I don't know if that even the problem will be solved because there seems to be a problem of windows software update. I also notice from the internet explorer 7 installed it stops working a few flashes upwards on you whenever you try to open it up if it's maybe part of the problem too. I do not plan to let internet 7 install go into all this time.

  Install the updates one at a time or 5 at the time may not be a bad idea.  Then when it breaks watch you and see if one of those is eager to replace your winsrv.dll file.

  You said you DO or DO NOT have to System Mechanic configured to run at startup?  Sometimes after installation of the updates, who see the new files (and if they are obsolete), can interpret the new legitimate files to be a threat.  If you could get started and uninstall that (at least temporarily) that would eliminate this possibility of this equation of many variables.

  The Dell has a number of service tag sticker and if so what does it say?  You can search for things by service number

  You should make a bootable CD of XP (no XP media required) Recovery Console.

  You see, Microsoft support engineers won't tell you how to do this either - since there is not an article of KB Microsoft Bing and link to.

  If you have a SATA drive, which will give you another challenge because you need to maybe get into BIOS and temporarily change the disk other than SATA configuration mode so the Recovery Console will be able to see, replace the suspicious winsrv.dll file, change the SATA drive and reboot...

  First, do the XP Recovery CD of Console and if you are able to use a system of work to ensure that the CD you made at least boots (you don't have to "do" something with it), which would be a good thing.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• After the updates installed for xp edition family, computer does not start even in safe mode (or in any other mode)

  computer does not restart after installing updates for xp home edition - does not restart in any mode (including safe mode)

  HiRonKlip,

  If you have the Windows XP installation disk, you can perform a manual system restore by following this link.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Outlook mail will only display "safe mode" after the updates installed

  Once the December updates have been installed, the mailbox has completely changed. He says now that it is in safe mode. It not add items on task bars, or save the changes in the components of navigation or the task on the sides. How do I get out of safe mode?

  Uninstalled KB3114409. This update may be the cause of the problem.

  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-Outlook/Office-Outlook-2010-Dec-8th-updates/8d30b8f1-EBEB-401d-8390-af611f8c637a

• Windows 7 does not open after the updates installed

  Help, please. Computer my son makes the automatic updates today and now it does not start. It takes me to the blue Windows screen then appears a box that says "System Recovery Options". It has two options

  Recovery tools 1-use by choosing an operating system (no present in the box). I tried this one and it did not work.

  2. restore your computer using a system image, which does not either even though I know he created images of system. Please any information would be greatly appreciated.

  Once I try these options from the dialog box get, with startup repair, System Restore, system image recovery, Windows memory Diagnostic and invites but not these wil do anything either.

  What can I do so that he could start over again what can I remove updates?

  Hello

  Disable automatic restart your computer and check if there are errors displayed when the computer does not start. To disable automatic reboot follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Just updated Firefox updated itself. Does not connect to the web sites when the mouse does not move. This all started after the update installed. PS there are more slow too

  nones

  Yes it's true. You just need to download the .exe file top of page (Firefox Setup 25.0.1.exe).

  Save it to your computer, double click and you should get a wizard to guide you through the installation.

• There were add - it and I lost it after the update and I don't remember his name

  There were add - it and I lost it after the update and I don't remember his name
  This is the module to show me the source of any content capable of click
  like the pictures on twitter or Facebook
  also videos on youtube
  and he showed a small icons with form of small pic on it with different colors
  and also sometimes in the form of small lock on it

  now I need to know what this add - on the name or how to get it back

  It seems that this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/redirectbypasser/

  

• After the update, I lost a large number of documents that I had edited and saved in my tablet. No possibility to recover them? Now I can access only the documents of the cloud.

  After the update, I lost a large number of documents that I had edited and saved in my tablet. No possibility to recover them? Now I can access only the documents of the cloud.

  I found an easier way to recover the files: I connected the tablet to the computer and then open the download-> Adobe Reader folder. There, I found all my files.

  After this boring experience, any recommended rather than Acrobat Reader PDF player?

• Local only access immediately after the updates from Microsoft installed.

  I have a Dell 531 s running Windows Vista Home Basic Edition.  It has been working fine for years with a USB wireless adapter.  The other night I left it on and Microsoft installed some updates and restarted my computer for me.  Since then, I can't get my router LOCAL ONLY access.  I can't access the router or do something that is no longer communicates properly with him.  I looked and I tried to uninstall IASATP 3 equipment, put it back and restart.  Still only ACCESS LOCALLY on this computer, so that all other devices Wi-wired and the same mental health of router to function normally.  Any suggestions?

  Hello

  -Who were the updates installed on your computer before this problem?
   
  Method 1: I suggest you to see link below and check.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  For reference:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
  Method 2:
  Follow the steps mentioned below and check if the problem persists.
  (a) enter in the network and sharing Center.
  (b) right click on the Network icon and select view status of.
  (c) click on Properties.
  (d) click on Configure , then select the driver tab.
  (e) click update the driver.
  
  For reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Hope this information helps.

• Wireless printing capability lost after the recent HP auto update. Laptop is HP Pavilion dv5t.

  The printer is HP C4280. I connect wireless with a wireless G HP 2101 print switch. I can get print by disconnecting and reconnecting power to the print switch. Probably need to uninstall the update and how to determine which?

  Hello

  You do not want to create a restore point, you want another option to restore your PC to an earlier time. Then, you will choose an available date as close as possible but before the updates installed.

  Microsoft article on how to use the system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  YouTube Video:

  http://www.YouTube.com/watch?v=Cn3CXtkZuDk

  Paul

• Applications no longer work after the update of the game store!

  In my Xperia SP applications do not work after the update from the game store and shows 15 times in one minute, unfortunately "Skype/social life/mcafee/chrome, etc." has stopped working while triying to open it. This problem is started, because I updated my phone in 4.3 jelly bean.

  My phone is ok now...

  I contacted the sony Xperia care and suggested a repair.

  And after repairing its great and works without a problem...

  The solution is here...

  Dear Mr. Jab,

  Greetings from support Sony Xperia.

  We sincerely regret the inconvenience.

  We appreciate the importance of your concerns and we are here for you help.
  In response to the request of ypur, we would like to inform to run the reapair software.

  The enforcement procedure to repair your Windows computers using software and application of PC Companion:

  Note! You should always back up all data before you perform a repair of software.

  1. Download PC Companion to sony and install it on your Windows computer.
  2. Turn off the phone and disconnect the computer.
  3. Open the PC Companion application.
  4. Select start under the support area.
  5. Select the software update feature, and then start.
  6. Not found phone is displayed. Select phone repair and Connect.
  7. You will receive a message on PC companion, that data will be lost if you continue.
  8. Check the box to confirm that you have understood that all personal data will be lost. And then click Next. The application prepares the update and if necessary necessary downloads data on the web.
  9. Select your phone model manually, and then click Next.
  10. Depending on the model chosen, you will need to perform a few steps for the update for PC Companion be able to update the phone software.
  11. Yet, do not plug the phone! Note! At this point, the phone must be turned off and disconnected from the computer.
  12. Connect the USB cable to the computer, not on the phone.

  13.Xperia: then just pressed the button indicated, connect the USB cable for device theXperia and keep holding and pressing the indicated key until your device update started... appears (in some cases installation drivers appears first).

  1. If you have not correctly, do the phone turns on and proceed to the next steps, drag the bottom of the convening of the notification bar.
  2. In this case, disconnect the phone from the cable, turn it off and repeat step 12.
  3. Follow the instructions on the screen. Once the repair is completed, unplug the unit and then restart the device.
  4. Click on Next. If the repair was successful, the message this device has been updated successfully is displayed.
  5. Click Finish.

  Please contact the Support of Sony Xperia.

  Looking to better serve you.

  Kind regards.

• Missing Bootcamp after the update to El Capitan

  Threre was a 100 GB bootcamp partition and a 400GO OSX partition before update Mountain Lion to El Capitan.

  Here's the output of diskutil list after the update:

  

  I could have made the mistake of the reconstruction of the Macintosh HD with DiskWarrior directory to try to solve this problem.

  quick search of TestDisk, we get:

  

  By selecting one of the [Boot] data entries in the MS 6174 is obtained:

  

  Impossible to find all entries containing the SVI. Is there hope?

  Watch disk utility another partition? This partition installed Windows, and if so, it is no longer start?

  Looks like it shows that your hard drive is partitioned because it shows the scheme of 500 GB partition and then only 400 GB for Mac HD. Shows also the 40 GB of data to Microsoft.

• Windows does not start after the update...

  Hope someone can help with this,

  I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

  L.Butler,
  Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
  Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Are you factory reset after the update

  I remember the froyo update left my lag and buggy x (very few, but noticeable). Everyone says the best thing is to do a complete reset after the update, if I had to re - install my phone from scratch... it was worth it! I anticipate this new... so we'll see.

  Fortunately with the new resettlement apps market will facilitate the...

  
  

• can't see the Dvd rom after the Update window window 10 7

  can't see the DVD rom after the Update window 10 window 7.

  Hi Michael,

  Thanks for posting your query in Microsoft Community.

  We would be happy to help you with the problem you are facing today. I understand the difficulty that is the problem, and I suggest you follow the methods below:

   

  Method 1: Run the troubleshooter of material and check.

  Follow the steps to run the Troubleshooter:

  a. type Troubleshooting in the search bar and click on it.
  b. click hardware and sound.
  c. click on Windows Media Player DVD and follow the instructions.

  Method 2: Uninstall, reinstall the drivers CD/DVD.

  a. press the Windows key + X , and then click Device Manager

  b. expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
  c. When you are prompted to confirm that you want to remove the device, click OK.
  d. restart the computer.
  e. After you restart the computer, the drivers will be installed automatically.

  Method 3: Download/install the driver CD-ROM/DVD-ROM from the computer manufacturer's support Web site.

  Visit the computer manufacturer's support Web site and install the latest driver CD-ROM/DVD-ROM and check.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.