Emerson HDTV, display settings, an HDMI output

Similar Questions

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• HP ENVY 15-j165 hdmi output problem

  HP ENVY 15-j165 hdmi output problem - tv in audio and video Setup BUT external display empty

  He mentions even the SONY-TV in (audio and video) output settings, but there is nothing on my tv, just a white screen

  have you tried re-installing the drivers, frustrated

  Something strange happened, IT WORKS! No idea why, has quite at least four times... anyway, thanks for the help, sorry not to be able to identify the problem for others with the same question...

• How to change HDMI output resolution in Windows 7?

  This is a new laptop Sony VAIO Y Series with Windows 7 Professional and a Samsung plasma TV.  Yesterday I connected my laptop and the TV with an HDMI-HDMI cable.  After that I went in Fn + F7 and selected "Projector" only, my desktop screen was successfully mirrored on my TV.   However, after I disconnected and then reconnected the cable, a dialog box appeared and asked me if I wanted to change my resolution of HDMI output.  While I felt fairly certain that my TV supports 720 or 768 only, I chose 1080 p.  (I realized it was a mistake.)  After doing this, the graphics in a video streaming box on MLB. TV is scrambled and very bad.

  So, I think I have to set my resolution of HDMI output for 768 or 720, but I can't determine how to proceed.  I scoured the foundations of knowledge and electronic bulletin boards without result.  I searched through my display settings and resolution.  I have made a restore of the system for the day before my error, also to nothing does not.

  When I right-click on the desktop and select 'Screen Resolution', then select the second (my TV) screen, the resolution drop-down list is 'greyed out', and I'm not able to change the setting, which reflects the 1366 x 768.

  Can someone please?  Thanks in advance for your time.

  Josh

  Hello, Ithilias

  Plug the HDMI and instead choose projector only, choose Extend.

  Now, return to the screen resolution of the screen and you should be able to change the resolution of the display of the second.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No HDMI output

  I have Windows Vista Premium on my Dell laptop. I can't get the picture on my HDTV via the HDMI output jack computer. He worked for a few minutes and then simply stop. Only the background photo of screen is displayed. Nothing else. What gives?    Thank you

  Hi Larry,

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problem with HDMI output in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  1. What is the brand and model of your computer?

  Please follow the steps in the links.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  We would be more than happy to help you if the steps above did not solve the problem.

• No HDMI output video output mode "DUPLICATE".

  I'm having a problem trying to get this laptop at the video output to the HDMI port mode DOUBLE.  In DOUBLE mode the frame buffer should be displayed on the screen of the computer AND it should display the video on the HDMI port, so it can be seen on a HD TV, and al.  What is strange, is that EXTEND and PROJECTOR ONLY modes work that proves the cable, HDTV, and the video port on the laptop works properly in these modes.  However, duplicate video mode is displayed on the screen of the laptop and no video out the HDMI port.  I know because the HDTV screen is empty with the exception that the HDTV displays the message "No Signal".  I have the latest firmware and installed video drivers.  Anyone who has an idea of what's going on?

  This computer is only 3 weeks.  This is the first time I tried to use the HDMI output on it.

  HP Pavilion dv7 - 6187cl

  Windows 7 64 bit

  I think that I found the solution to the question that I had.  The problem seems to be that the laptop seems to be driving the HDMI output on HDTV with a resolution of 1600 x 900.  This causes the HDTV to not be able to synchronize the signal from the laptop.  As HDTV does not recognize the resolution, the screen on it is empty.  However, even though mode DOUBLE, if you change the resolution of 1366 x 768 laptop, then the laptop and HDTV display video.  Curiously, although the HDTV can manage resolution up to 1920 x 1080 it is impossible to view the output of the laptop when it is set to 1600 x 900 mode DOUBLE.  If the PROJECTOR ONLY mode HDTV work very well in resolution 1920 x 1080.  In addition, when mode EXTENSION the laptop and the extended secondary display can be set to a resolution of 1600 x 900.

• F5 will not read a map and will not HDMI output

  Hey guys, I'm new here and new to F5. I just got me second hand F5 and opportunity SXS pro + card (64 GB) and the camera is not picking up. When I insert the card, turns bright red media access, and then I get locked out settings. I get a cannot continue message when I try to do something. I don't get a message to format the card, and I don't think I can access the menu to format the card manually because I don't have a HDMI output power on my HD Gratical Zacuto. Any idea of what this could be the cause?

  
  

• Live streaming and own HDMI output on camcorder SONY consumer (HDR-PJ650VE in my case)

  Hi all

  I'm trying to figure out how I can live streams, using my Camcorder HDR-PJ650VE. I managed to connect the camcorder to my TV by HDMI out and get the live stream, but the problem is that it also displays the superimposed onscreen. It would be a very useful feature, since it this way, you are able to capture the stream by a jury of consumers capture and share it on Youtube for example.

  I cannot find anything on the manual release of the stream HDMI output and get rid of overlapping info. Is there a key combination or a hidden menu to achieve?

  In addition, it seems very strange SONY would not offer such feature, as for example the PANASONIC offers this good enough consumption walked on models like HC-V520

  Please, let me know if it would be possilb esolving this annoying limitation

  Best regards

  Matteo

  I want to share my discovery because it seems to be valid for all SONY camcorders: to have a clean HDMI out, turn off on HDMI CTR.

  I'm very happy now and I'll start live broadcast!

• Not possible to set the HDMI output as default screen on Qosmio G30

  It is not possible to set the HDMI output as default screen! This works only with VGA output. There is no option in the BIOS. According to support, Toshiba will plan any action for this useful feature.

  I use an external TFT with HDMI adapter DVI Cable and I want to have as default screen TFT. With VGA, it will work without problems.
  Any solution?

  Best regards
  Nicolas

  Hi Nicolas

  Very interesting question! In my view, HDMI port is to be used with the HD ready LCD TVs or plasma. Combination of connection HDMI and HD DVD movies, you can really have a HD on your TV picture quality.

  As you know the port is a standard VGA port to connect external displays. The image quality is very good and, in my opinion, you should not use HDMI port for the same. Do you perhaps the best image quality?

• Y510p - drivers nvidia HDMI output that's an analog connection

  I had occasional problems with HDMI output before, but can usually get things working in certain combinations to turn off TV and laptop.

  This time, however I can't convince them to talk together. I suspect that this may be due the new drivers (353.30).

  The control panel can see TV and recognizes that it is a LG TV, but TV shows only "no signal".

  I tried

  -the extension and mirroring of the display

  -changing the resolution

  but no luck. The only thing is that enter in the nvidia Control Panel, I noticed that the control panel is refers to the "analog display" and claims that he uses the VGA connector.

  Any ideas how NVIDIA persuage it's really a digital camera display via the HDMI connector?

  Thank you

  Mark

  Now fixed by the expediency of simple to try another HDMI cable :-(

• Have W2071d monitor, display settings do not allow non-native resolution matrices

  '' Recommended '' this monitor width setting is 1600 X 900, but when I go to the "Display" dialog box, the only options available to me are that were available using my old monitor.

  The monitor "selected" for common use (under "Advanced"-> tab monitor in the "Display settings" dialog box) is dangerously just labeled "Default monitor", and while the system produces to the monitor, it only does these original native resolutions, so that, under factory settings, the image is stretched horizontally to a significant degree, and when I put it to adapt to the proportions rather He's a little blur hired on small fonts/texts during the largest possible display setting, almost as if I ask it to produce makes me superior to output 1-to-1 ratio of pixels and the entire surface of the monitor is not being used anyway.

  In any case, the button/dialog box 'Properties' is not yet available on the tab 'monitor' breast, so I can't try to update the driver. I don't really know what to do at this point. In addition, the computer now tells me whenever I start that he detected new hardware connected, but it may not recognise, does not support installation at home, but whenever I try to point it to the drivers it tells me that the file contain no information about my hardware device.

  VGASave is the 'default' for Windows XP driver if there is no other driver available for the system. It is possible that some sort of error, or maybe an automatically Windows Update installed, breaking your graphics card driver. I would certainly try reinstall the driver as a first step of troubleshooting.

  Here is a link to the latest version of the driver for the Radeon XPress for Windows XP series:
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/integrated_mce-XP.aspx?type=2.4.1&product=&lang=us&Rev=10.2&OSType=Windows%20XP%20-%20Professional/home

  Good luck! Let us know how it goes!

• I have a NVidia GTS450 with HDMI output. When I connected it I had sound & vision. After the first time that I turned off the desktop computer sound options just told me THAT HDMI is not connected?

  I am running Vista Home Premium 32 bit. It does not seem to recognize the connection although it is really connected and one / v amp is running. I get the desktop on the HD TV but no sound.

  Hello

  By default the Vista transmits no sound on HDMI output.  To change this to change the settings in the control panel.

  Note: This will turn off sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

  a. click on the button 'start '.

  b. click on 'control panel '.
  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.
  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.
  e. This will bring up a window titled "Sound".
  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.
  g. There should now be a checkmark on this option.
  h. the sound should play through your HDMI connections to the TV.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Display Port to HDMI on TV

  I bought a Display Port to HDMI, however, when I connect it to my TV Panasonic 42 "I don't get any screen (the screen is blank).  My computer laptop "r500" behaves as if she's not recognize that it is connected.

  Do I need to download (update of the driver, etc.) or all settings I need to change to the display port work?

  Thanks for your help

  OK, so I got it working last night, don't know how I did it. I have day the Director of the presentation and a few other things.

  I turned off the laptop, plugged into the display port to HDMI and then turned on the laptop back and everything worked perfectly.

  I don't know what was wrong or how I corrected, but it works now.

  That said, if someone Lenovo reads this, my case number when I called was 12r9b3k.  The man on the phone told me HDMI compatibility was not possible and of course, he was wrong, or did not want to take the time to understand why it didn't work.

  Thank you

• Vista don't forget display settings; move the second monitor from top right.

  Windows Vista is often (not always) forgotten my display settings for my external monitor.

  I have a Dell XPS M1530 laptop with a NVIDIA GeForce 8600 M GT graphics card.  The laptop is running Vista Home Premium SP2 with all updates applied.  I have a Samsung LCD monitor mounted on the wall above the laptop screen that I use as a second monitor (driven by the output of the laptop).

  I updated the display settings so that my second screen is located above my main monitor. My problem is that Vista often forget this parameter after the standby or hibernation, and returns the value by default display settings of 'second monitor is to the right of the primary monitor'.  This means that I often walk in the display settings to do the right thing (pardon the pun).

  I've seen other messages to try to use 'View to connect' in the settings of Windows Mobile (win - X).  However this option only supports a second monitor is located on the left or the right of the main screen - not on it.

  Any suggestions before I have eventually give up and drill several holes in the wall to mount the external monitor to the right of the screen of my laptop?

  Thank you.

  In my case out of sleep the primary monitor (laptop) is off (still asleep) while the second monitor is on but the resolution is that the screen of the laptop and he took the position of the main monitor. I push the "fn" + 'f4' key to switch between monitors, laptop monitor turns on but the secondary display stands. Another pressure on the keys cause the laptop monitor to be shared and the secondary monitor is now on, that's what toggle keys do. On the third time that the keys have pushed the two monitors came the resolutions they were Setup.

  Try using the ToggleKeys. On some laptops the 'f' key to toggle is "" f5"key. My 'f4' key has the image of two monitors.

  I hope I could help

• NVIDIA HDMI output - not plugged in (?) = no sound on the TV, but great picture!

  Hello

  I'm not very experienced in the computer, but I know now that the connection from your laptop to a flat screen HDMI cable TV is not as easy as it should be...

  Description of the problem: no sound, but the big picture on the TV when connecting to my HP dv7 entertainment PC through HDMI to it. Specifically: for NVIDIA HDMI output icon is grey and not active in the "pilot sounds and reading - menu" - you can not simply give (other icons that are active are: speakers and headphones double, double independent headphone & SPDIF). You can also see the TV under "Control panel" > "Devices and printers" - so the tv is connected. In Device Manager, I see that I have 2 sound processors (?) "IDT High Definition Audio CODEC" and "NVIDIA High Definition Audio" - I don't know one that is used for the HDMI connection.

  I have at my own risk installed the latest driver (?) for my graphics (NVIDIA Geforce 9600 M GT) - before I did, the NVIDIA HDMI output icon participated actively in the "... sound"-menu (so you can turn it, etc.)- but no sound on the TV and then either...

  I suspect there to be something wrong with the drivers for my graphics card or processor... or maybe you can't send sound to the tv with my cable? It's a standard HDMI cable...

  Laptop model nr: HP Pavilion dv7-1094eo

  Operating system: Windows 7 Professional 64-bit don't know ServicePack... .

  Graphics card: NVIDIA GeForce 9600M GT

  HDMI cable, tv LCD Philips model: 37PFL7605H

  If someone could help please advise me on what drivers to install or anything else, I would be very grateful!

  / Marie
  

  First do you uninstall IDT High-Definition Audio CODEC Driver and NVIDIA GeForce 9600 M GT drivers by going to

  Control Panel\Programs\Programs and features.

  In case if request you a restart of the computer, please make sure that restart you one after the other. Do NOT avoid restarting the computer.  So go ahead and download view updated and audio drivers from the HP website here.

  Yet once, after installation if you are prompted to restart the computer, go ahead and restart the computer. Once done, go to:

  Control Panel\Hardware and the sound and click on sound. On the Read tab, right-click on the white (empty) space and you will see 2 options (see the disabled devices and show disconnected devices). Make sure that both options are checked for all devices listed reading.

  Now, right click on the option to output HDMI device and make sure that the option "set as default device" is selected for the sound of the external display during playback picture on external monitor.