Empty pictures uses 1.2 GB of storage?

Similar Questions

• My friend 5s IPhone uses a ridiculous amount of storage for photos

  My friend iPhone keeps running out of memory (Yes, it's a 5s with 16 gigabytes). The biggest memory hog's Photos, which use 7.1 GB for storage of photos. The problem is, this is a ridiculous amount: there only 30 pictures! (For comparison, my iPhone 6 stores about 2000 pictures in 20 concerts.) What's wrong?

  YES, we emptied her folder of deleted Photos. There are 0 bytes used to store the photos removed (30 day cycle) for the moment.

  YES, we experimented with removal of a few pictures, then, seeing how much decreases the use of the photo. When we delete 5 pictures, the total storage used down entire concert 0.1, which equals approximately 20 MB per photo, which might be a little on the high side but not much. We are up to 20 photos with 6.8 GB - still, it sounds ridiculous to me.

  What else can we? Is there a problem with corruption? Perhaps there is a photo (or photos) that think iOS includes concerts of the space, but seems we like just a normal photo that should take a normal amount of space? It has about 5 photos that he's afraid to delete (even if they are now saved on Google Photos). So let's say we delete the other 15. If, judging by previous data, thereby reducing its use to 6.4 GB, do we take a deep breath and delete others?

  If the problem with deleting all the photos, then - Phew! -It can be upgraded to the latest version of iOS and hope that the problem does not recur. But suppose that it ends with zero pictures and the use of the photo of 6 GB storage, or so: what would solve THIS problem?

  The only other thing I can think of that MIGHT help the problem is that I'm not sure that it has never updated its version of iOS from one delivered with its 5. It doesn't have a Mac with iTunes to upgrade to the most recent, and of course it lacks the 1.5 GB (or other) he needs to upgrade via WiFi. But why the iOS version would have something to do with it? That makes no sense.

  Help! Thank you, in advance, for your help. I'm sorry that I don't have her phone handy to see exactly which version of iOS it is running.

  I repeat that Yes, we found the folder deleted photos and deleted the pictures inside. And Yes, it has recharged his cell phone recently.

  You have found the folder deleted recently, but you must do this:

  1. go to settings > general > Date & time and set the date to 01/09/2014

  2. go back to Photos, open the folder deleted recently and see if there is any photo more that should be deleted

  3. Once you have complete, date back to automatic and then reset the unit

  4. see if the storage has been released

  In addition, if your friend has a lot of emails or Messages with videos or photos, or videos in the camera, so those who take up a lot of storage.

  And consider that iCloud library is not active?

  See you soon,.

  GB

• When I was able to remove the preinstalled Apple apps I have no use for and take my storage?

  When I was able to remove the preinstalled Apple apps I have no use for and take my storage?

  When Apple decides to make that an option.

  In total, I'd be surprised if apps take up more of one to two hundred megabytes.

• Windows live login page my profile picture used to be displayed, but now it of just the standard face icon by default, how do I get my rear profile picture?

  As I said in the title, on windows live login page my profile picture used to be displayed, but now it of just the standard face icon by default, how can I get my rear profile picture?

  Hi SteveWoodhead,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live and would be better suited in the Center of Windows Live Help solutions. Please visit this link to find a community that will provide the support you want.

  Thank you!

• Advantage PC empty during use. We had to wait a few hours turning it back on.

  Advantage PC empty during use. You have to wait a few hours to restart.

  We need a lot more information before we can be of any use.

  What are the specifications of the system?

  Have you always happens, or has it just begun?

  You have installed new software (like games, etc.)?

  You can start in SafeMode (F8)?

  It's a laptop?

  That it's hot to the touch?

  etc...

• How can I resize a picture using Picture Manager please?

  How can I resize picture using Picture Manager please? Let's say I want to put 4 x 6 cm for a given photo dimensions. I tried to resize , but is it compresses the picture to send by e-mail etc... It is basically a photo compressor.

  How can I resize picture using Picture Manager please? Let's say I want to put 4 x 6 cm for a given photo dimensions. I tried to resize , but is it compresses the picture to send by e-mail etc... It is basically a photo compressor.

  =============================
  If you are running Windows XP... it is a free software
  The PowerToy that is useful for resizing of the pictures:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Go to the following link and download and
  install: ImageResizer.exe
  http://www.Microsoft.com/windowsxp/downloads/PowerToys/xppowertoys.mspx
  (does not work on Vista)

  Then, you can open any folder containing
  images and you will have an option to resize.
  Just right click the selected image files and
  Choose resize images in the menu. You
  can select a picture or an entire group.

  The program will place the resized in copies
  the folder with your originals.
  (Tip: * never * overwrite your originals)

  To ensure that images in both portrait and
  landscape orientation are resized to the
  same dimensions... go to... Advanced...
  and enter the largest number in these two areas.
  IOW... for 600 x 800... Enter 800 in these two areas.

  (Tip: even if you resize the Photos to the same)
  dimensions (original)... the file size will be greatly
  reduced).

  =====

  If you want to change the proportions of a picture...
  you have to reframe it... otherwise it will be distorted.

  The following freeware has a tool of good harvest.
  Just select a thumbnail and press X to open the
  Council for culture. (Tip: always save your editing / cropped /)
  photos resized under a new name)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm

  The following tutorial provides information on the creation of a
  2 "x 2" photo ID, but the steps would be
  basically the same for any size.

  Now, open the program and select (highlight)
  the image you want to change.

  According to... to... Edit / crop Panel (or type... (X)

  Click on the button 'Set Ratios of paper'.
  (it's just to the right of the proportion of paper
  fall of window)

  Click on the 'Add' button and enter... 2 x 2 "
  Click on... OK / OKAY... (this will give you the square
  format you need)

  You can resize the selection frame by dragging
  reposition by dragging corner handles
  the arrow of the 4 channels. At the end... Click on the 'culture '.
  button.

  Now... to... File / save as...
  Choose a backup location, enter a new name for
  the photo and choose a format to save in...
  Left click on the Save"" button.

  =====

  Info about photo manager
  If you resize a photo with Picture Manager and
  save it when you see the dialog box saying:

  "There are changes that have not been saved"

  The original photo will be overwritten (replaced)
  with the rezized version... IOW the original will
  be unrecoverable.

  To keep two versions of the picture, resize it
  and go... File / save as... Enter a new name for
  version resized and on the left, click on the "Save" button.

  When you close the photo manager and see the
  dialog box:

  "There are changes that have not been saved"

  On the left, click the do not save"" button. Now
  have both versions.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot display pictures using Windows, error Photo Viewer: cannot open this picture because you don't have the appropriate permissions to access the location of the file.

  Original title: ASK the VIEWER of PHOTOS WINDOWS WINDOWS 7

  WHEN I OPEN MY IMAGE (PHOTO) COLLECTION IN WINOWS PHOTO AT SUNDAY VIEWER BUT IT WINDOWS PICTUREMESSAGE cannot OPEN THIS PICTURE BECAUSE YOU HAVE not the PERMISSION APPROPRIATE TO the ACCESS of the LOCATION of THE FILE, I CHECK NO VIRUSES, NO PROBLEM to OTHERS AND SAID THAT SATURDAY, I OPENED TIME OPEN THE PICTURES, BUT AFTER ONE DAY WHAT PROBLEM ANY DEFINITION of PROBLEM OR OTHER PLEASE HELP ME AS AMODERNE, IF YOUR NEED A FURTHER INVESTIGATION OF MY SYSTEM SAYS I SEND YOU AS BURT SOLVE THIS PROBLEM

  Hi JULIE,.

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are not able to view pictures using Windows Photo Viewer. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1 did you change on your computer before the show?

  2 are you able to open the file using paint?

  Please follow the steps mentioned below:

  Method 1:

  Step 1: Perform safe mode

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  System Restore can return programs and system files from your PC to a time when everything was working well.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: If you have installed an application after the date to which you are restoring, you will need to reinstall these applications

  Please complete all of the recommended steps and if after following the steps to issue still persists, please come back to us and we will be happy to provide you with additional options available that you can use to get this problem is solved.

  If you are unable to perform the steps mentioned above, I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

• I use Photoshop CC and have just watched a tutorial by Andy Anderson about bosses. In the tutorial Andy put a frame around a picture using the fill on the Edit menu. When I try the exercise my fill window is different and that is not the image

  I use Photoshop CC and have just watched a tutorial by Andy Anderson about bosses. In the tutorial Andy put a frame around a picture using the fill on the Edit menu. When trying to exercise my fill window is different and does not have the picture frame option. How to overcome this please?

  Hello

  Please, go to the filter menu and choose make it > photo frame.

  Thank you

• I installed a trial of Illustrator from Adobe on my macbook pro. I want to draw a picture using the custom trace button but can not. Does anyone have any ideas how I could track custom?

  I installed a trial of Illustrator from Adobe on my macbook pro. This is the release of 2014 of the adobe Illustrator. I want to draw a picture using the custom trace button.

  I start a new document. Then I place my scanned pencil/color pencil, drawing, in the document. I tried to scan and then placing it as jpeg, bitmap and a tiff file. I tried scanning and place then, in color and in black and white. The scan mode that I use is flat. Adobe Illustrator allows me to select the default button and one of the eleven preset buttons (e.g. photo high fidelity), but cannot me click on the record button custom. The custom trace button is gray while all other buttons are white.

  Does anyone have any ideas how I could track custom?

  Just it trace, and then change the options later. The follow-up is 'live', you can press the buttons and see what happens.

  See also the manual.

• Should what procedure I use to replace a secondary storage SATA?

  Should what procedure I use to replace a secondary storage SATA?

  I have a SATA secondary drive that is too small.  There nothing critical in this regard.  If I'm asking the domain controller to replace it with a larger, they shut down the server, remove the small drive, put in the largest and start the server up.  My questions are:

  1 how the ESXi 4 will react when he sees the missing original disc and a vacuum?

  2. How can I get the new drive back under the control of ESXi 4?

  Thank you!

  1 how the ESXi 4 will react when he sees the missing original disc and a vacuum?

  You must just rescan the HBAS and set up a new store of data on this drive.

  2. How can I get the new drive back under the control of ESXi 4?

  Even as before it should appear after a restart.

• Cannot import pictures using the USB cable

  I have a Canon 5 d Mark III and LR 4.3. I normally import pictures using a card reader see However, I'm on vacation and have only the USB cable that connects the camera to my Macbook Pro. I used it successfully in the past to import photos, but I am now getting the following error:

  

  I get this if I select one or more photos (there are about 195 on the map right now).

  Any ideas?

  Often, this error message means that LR cannot write the file to the location you're trying to move/copy it to, usually because your permissions to the folder or drive do not allow writing. Also, make sure that you have property ot the disk/folder.

  HAL

• Where are the pictures stored when taking a picture using the Microsoft Lifecam HD 6000?

  Microsoft lifecam hd 6000 image storage

  Hi all

  Does anyone know where the photo store, after I take photos using microsoft lifecam hd 6000?

  Thank you.

  You can check if the pictues were stored in the folder %Temp%.

  Click on Start and then run.

  In the text box on the run window, type %temp% , and then click OK.

  A folder full of files and other folders will appear.

  You can search by the date field for the day that you were using your WebCam. If the pictures are not saved, you can search for them by name. If you cannot find them by searching, photos no longer on your computer.

  If you want to increase the space available, all the folders and files that you see in this Temp folder are no longer used by Windows XP and can be deleted safely.

  To remove files or individual files, hold your Ctrl key while clicking on each item you want to remove. Release the Ctrl key when you are finished.

  To remove these items, press your delete key or choose file , then delete from the menu.

  Confirm that you want to delete the files by clicking Yes in the window to confirm deleting multiple files that opens.

  After all the files have been deleted, you can close the window and empty your trash, permanently remove the files from your PC.

  To ensure that the pictures of the webcam are saved for next time, you need to manually back up.

  Let us know if that helps.

  Marilyn

• BlackBerry Smartphones trying to transfer photos from mem device bb to the pc using the bb as a storage device but impossible... Help, please

  I read the threads on this and the link that suggested a programme of assistance of the forum. I don't have a media card yet, so the pictures are just in the device memory. I plugged my pc with the USB the bb and he returns as removable disk I have in my computer and reload so I know that it is no doubt being located by my pc. However, when I click on disc of deletion I have, it says "Please insert a disc in the drive I '.»

  I then tried to follow what another user did, using the Desktop Manager and Media Manager for my photos.

  When Roxio opens and I click on 'images', I get a split screen up and down not a left to right as some users have described.

  The upper pane, called 'my media' has nothing and the message says: "this view no results."

  The lower pane, called "my devices" shows all my pictures.

  How can I get these off my bb and on my pc? Media options card I media support, encryption, no mass storage on... all as needed, even if I do not have a Cardinal media.. just in case where it did something to help, which was not.

  I need advice please. I'll be able to get a media card in the next few weeks and then I hope that things will work better.

  Thank you
  CHYN

  Take a look at this tutorial using the Media Manager: http://demos.blackberry.com/mediamanager/na/us/gen/

  At the top left, there is a menu whereby you can select 'connection and file transfer. It should be useful in showing you how to do this.

• Start worm w 29 when I open a blank tab a search bar appears in the empty tab using yahoo...

  Please don't forget the search next to the address bar URL bar works very well, I defined for Google and works perfectly.

  HOWEVER, IN A VIRGIN TAB I opened my frequesnt visited sites are in tiles and just above the tiles there is a search bar another. If I type in a research itreurns, a Yahoo Search page. I have this nmot want Yahoo how to change to Google also.

  More importantly, it is much more intuitive to have this search bar on the empty tab page... to use the same search engine default which is located above the main header alongside the URL address bar. None of us would then have ay question

  Great, thanks for posting back.

• My iPad mini claims its storage space is full but I use only 10% of the storage. I deleted files and applications but it does not change; What can I do?

  I can't recover any storage and I do not know or cannot find what is using it.

  You probably have an App or a corrupt system and may have to do a restore of the system to be solved. However, it would not hurt to first try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears.

  The system restore. First save your device via iTunes. Import your photos on your computer, and then copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup.

  https://support.Apple.com/en-us/HT201252