Enable checkbox focus without COMMIT?
I have an array of checkbox controls. Each control has the same callback function that will update a text string identify which box was clicked.
I would like to give my users the possibility to get the focus of a checkbox without an EVENT_COMMIT passing control. In other words, it is likely they will do a simple click on the control to get the point here. But in doing so, they will inadvertently switch the value of the checkbox.
So, my thoughts were the following:
(1) capture the EVENT_COMMIT and swallow it, or preserve the value and keep the same value before validation. It does not, such as changes in value before validation occurs again.
(2) just the user to right-click on the control. With the EVENT_RIGHT_CLICK, I can call the callback once again with the EVENT_GOT_FOCUS event. It works pretty well, but it is quite non-intuitive.
I guess I'm looking for another original way to do it.
If I understand what you're asking, it seems that this would do the trick. In the left click event, control and activates it and if it is different from that of the control that was clicked on, set the active control to the control that the user has clicked on and swallow the left click event.
int CVICALLBACK CheckboxCB (int panel, int control, int event, void *callbackData, int eventData1, int eventData2) { int swallow = 0; switch (event) { case EVENT_LEFT_CLICK: if (GetActiveCtrl(panel) != control) { SetActiveCtrl(panel, control); swallow = 1; } break; } return swallow; }
Tags: NI Software
Similar Questions
-
The screen minimizes or loses focus without reason in Vista
I have a Dell Studio XPS 435 t with Windows Vista Home Premium 64-bit. I have tried to disable my antivirus (Norton) and that you have disabled my interned so connection and screen has further reduced or loses focus a lot. I don't have AVG on my system and I tried to uninstall and reinstall DirectX without a bit of luck. I also check the Task Manager when this happens and it doesn't show anything else running at the same time. It drives me crazy. Any help would be greatly appreciated.
Hello
Method 1: I suggest that you put the computer in a clean boot and see if the problem still occurs:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2: I suggest that you follow the steps in the link and check if that helps:
-
How can I update the field when the enabled checkbox
Hi all
I am using oracle 10 g forms,
I have a block with 20 areas. So first 10 fields are not editable and remaining are editable. If the user enters data and modifies the data. And check the box and save the data.
Inside save button I wrote the code update.
When the user change records of two or three and three check box and click on save button only a recording is done in my custom table.
It's my code please correct me where I went worng.
It's my code inside my button
declare
Begin
If: ASSEMBLIES_BLOCK. CHECK_IN_OUT = 'Y' THEN
IF SHOW_ALERT ("UPDATE_ALERT") = alert_button1 THEN
LOOP
XXTLX_PO_LOGOSTICS. XXTLX_PO_LOGOSTICS_UPDATE;
WHEN THE OUTPUT: SYSTEM. LAST_RECORD = "TRUE";
NEXT_RECORD;
END LOOP;
STANDARD.COMMIT;
fnd_message.set_string ("Transaction saved successfully");
fnd_message. Show;
On the other
NULL;
END If;
END IF;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHILE OTHERS
THEN
NULL;
END;
I write a procedure in the program unit.
XXTLX_PO_LOGOSTICS. XXTLX_PO_LOGOSTICS_UPDATE
Is my block of current assemblies that the user enter data and click the save data check box.
Update XXTLX_PO_ASSEMBLIES set CASE_NO = nvl(:assemblies_block.) CASE_NO, Null),
PACKAGE_TYPE = nvl(:assemblies_block.) PACKAGE_TYPE, null),
PACKAGE_QTY = nvl(:assemblies_block.) PACKAGE_QTY, Null),
GROSS_WT = nvl(:assemblies_block.) GROSS_WEIGHT, Null),
OPI_DATE = nvl(:assemblies_block.) OPI_DATE, Null)
Where ponum =: DETAIL_BLOCK. PO_NUMBER
AND PO_LINE_NUM =: DETAIL_BLOCK. LINE_NUM
AND BOM_NO =: assemblies_block. BOM_NO;
So when we click on the multiple check box and save the data that one is striking.
Thanks and greetings
SrikkanthI guess that I do not understand.
>
... my requirement is that active fields must get updates. If there is way to 10 records in a block, sick day only registration of the 3rd and 4th and then click on the box... and then ill click on save button.
>Is - this block a block of data or a block of data non-base? If it is a block of data, Oracle can manage updates of this block for you because if keep tabs if a record has been updated or not and you wouldn't need to do an UPDATE statement.
If it is a non-base of data block and you are a loop in each folder and only update items that have checkboxes next to them you would still go to the first record, and then scroll through each record and see if it needs to be updated. I guess right here because I don't think I have a good knowledge on what you're doing, but you can change your XXTLX_PO_LOGOSTICS. Package XXTLX_PO_LOGISTICS_UPDATE update only elements that have checkboxes next to them, by checking every box:
-- Check Case No if nvl(:assemblies_block.chase_no_check,'N') = 'Y' then update xxtlx_po_assemblies set case_no = :assemblies_block.case_no where ponum = :detail_block.po_number and po_line_num = :detail_block.line_num and bom_no = :assemblies_block.bom_no; end if; -- Check Package Type if nvl(:assemblies_block.package_type_check,'N') = 'Y' then update xxtlx_po_assemblies set package_type = :assemblies_block.package_type where ponum = :detail_block.po_number and po_line_num = :detail_block.line_num and bom_no = :assemblies_block.bom_no; end if; -- Check Package Qty . . .
-
Bad figures without comma.
I use a financial application that displays numbers without decimal. I mean instead of display 655.957 it displays 655 957. I use the customer instant 11g 32-bit 64-bit Seven. Can someone help me? Thank you
Check NLS_NUMERIC_CHARACTERS https://docs.oracle.com/cd/B28359_01/server.111/b28320/initparams144.htm#REFRN10126 setting
-
enable all controls without property nodes
On my FP, there are controls/indicators that are in the hidden state. I know that I can make them visible with the nodes properties. However, I was wondering is there a way to do it with just a few clicks?
While in the development environment or execution?
In the development environment, you can right-click on the terminal on the block diagram and select 'Show Control'. Unfortunately, you cannot select multiple controls/indicator to perform this action. I think he had an idea submitted to allow this, but I'm not sure.
In the run-time? Laughing out loud
-
How to enable NAP protection without buying Norton?
Hi guys iam not the smartest tool in the shed did not use long computers, I'm running Microsoft security Essentials and windows firewall, get boring people, trying to get me to buy $400. NAP because mine is not activated, can anyone who is computer savvy help, I would be very grateful, because I am a pensioner and only use my computer for Internet, email, and social things, I don't do any banking or financial activity, so my question is what do I have to activate my Protection network and if so"how?
What about John
Microsoft network access protection is not something used by most home based computers. It is not something you download or turn on either.
NAP's platform or solution requiring hosts or servers manage network policies and customers to interact with the hosts or servers to be accepted on the network. NAP is primarily a tool to validate or authenticate the protections of the network on a computer before allowing access to a controlled or secured network.
If you are up-to-date with MSE and Windows firewall, you should be fine.
-
Display a field of digital text if the enabled checkbox
How I would go about setting up a check box so that when the box is checked, a separate text form field appears and the separate text form field also displays a specific number. And, if the box is unchecked, the same separate text form field is hidden and does not have any number show?
As the mouse in the action box, use this code:
var f = this.getField ("OtherField");
If {(event.target.value=="Off)"}
f.Display = display.hidden;
f.Value = "";
} else {}
f.Display = display.visible;
f.Value = "123";
}
-
I would like to have the ability to change the orientation of the screen without physically rotate the iPad vertically.
Here's what I mean.
I have the iPad on the desktop and I want to check the email in landscape mode, I move on the table horizontally to landscape mode and orientation should change. It is not for the moment. I have to raise the iPad on the table and to change the direction from Portrait to landscape and when I go back to an application demanding in portrait mode, I have to again raise the iPad on the table.
I was wondering if there is a utility app that allows the switch without raising the iPad and turning to change direction.
Hello amitkapila2,
Yes a few apps will change your orientation when you start them. Try roating your iPad in landscape ounces landscape enable locking focus on the home screen (in the last control center) and then launch the application of it rotates so it's the app.
-
Had problems with Firefox hanging and script errors. Later decided that it was Adobe Flash, he did. Uninstalled Flash, reset Firefox, reinstalled Flash and asked activation on request; worked very well. However, by mistake allowed him to be always activated on the site of the newspaper and now he returned to hang and the script errors every time I access the journal stopped me access anything on the tabs. How to reset the activation to be 'enable on demand', without having to reset Firefox?
Hi, take a look at this article, in particular, how to set permissions.
Hope that helps.
-
The manual focus ring on my Canon 18-135mm EF-S is free to turn if the switch is in the position AF or MF. It does not change the focus. Auto focus works well. Another objective of zoom seems to allow a manual focus without difficulty. What have I forgotten?
What is the new version of the STM or the old version non - STM of the 18-135? It will make a difference in the operation of the focus ring.
If this is the version non - STM (original 18-135), then you should _not_ attempt to focus of the lens manually with the switch auto focus mode AF.
If it's the version of the STM (new 18-135) then you can rotate the focus ring if the switch of autofocus is AF or MF (but it wont focus unless the unit is on and not asleep.) For example press the shutter button halfway to reactivate and work the focus ring).
Most of the USM goals (there is no version of the 18-135 USM) allow the ring to be returned if the device is in AF or MF mode. The ring is basically a like a sweet clutch and there a few deliberately built sliding- and these rings of just development will keep turns and turns... There is no hard stop for the ring.
-
MAF: How to install IOS8 - WITHOUT - 6 Xcode?
Hey Brainiacs (:=) community
Can someone send me a reliable link on the upgrade of my MAC (OSX 10.9.5) to IOS 8 * WITHOUT * commit the update for XCode 6?
IF I understand it well - I need to XCode x 5, IOS8, more recent MAF framework. That seems difficult to download the Apple developers portal comes with 6 XCode.
Always authentic,
TreeStrepek
You can have both versions of Xcode on your machine.
When my mac automatically updated Xcode to v6 without asking, I just downloaded again 5.1 Xcode and moved the v6 to another directory.
Make sure your JDev points to the correct version of Xcode.
-
Loop and masking subform based on checkbox
I have a form where forms have a box in them. I need a script when the user clicks a button to hide all forms of sub who do not have the enabled checkbox. Thanks for any help you can provide.
var allChildElements;
var intNumElements;
var currentElement;
var i;
allChildElements = CRT130.nodes;
intNumElements = allChildElements.length;
for (i = 0; i < intNumElements; i ++)
{
currentElement = allChildElements.item (i);
If (currentElement.className = "checkbox")
{
if(currentElement.RawValue == 0)
{
currentElement.presence = 'hidden ';
}
}
}
Hello
className of a checkbox control is "on the ground", if you want to check if the item is a checkbox, you must Access the field in the UI to be able to check what kind of field it is.
Even if a className checkbox checkButton instead of the check box.
You must create a recursive function to traverse each subform and also each elements in the subform.
function recursiveLoop (rootObject) {}
for (var i = 0, oLen = rootObject.nodes.length; i)< olen;="">
var currentElement = rootObject.nodes.item (i);
If (currentElement.nodes.length > 0 & currentElement.className == "subform") {}
recursiveLoop (currentElement);
} ElseIf (currentElement.isPropertySpecified ("ui") & currentElement.ui.nodes.item (0) .className == "checkButton") {}
{If (currentElement.rawValue == {currentElement.getDisplayItem (1)})}
rootObject.presence = 'hidden ';
}
}
}
}
Create a script object (xfaCheckBoxes) with the function above to the breast, and then you can call the function on the click event of the button
Button1::click-(JavaScript, client)
xfaCheckBoxes.recursiveLoop (CRT10);
This should do the trick,
I hope this will help!
-
separate keywords by using spaces instead of commas does not
In Lightroom Preferences > interface > I chose "spaces.
It doesn't seem to work
When I add keywords that they are always separated by commas (see the keywords placed in the screenshot)
is this a bug? I started a new catalogue to try out it and nothing changes
This is important for me, because I want to export keywords in wordpress and use them as the image tag without comma = alt
Hi miklog,
This is the expected behavior in Lightroom.
Spaces under Lightroom preferences for keywording allows you to enter different keywords with a space, but Lightroom displays difference keywords with a comma.
This is important because otherwise Lightroom will not be able to interpret the difference between a word keywords and keywords to multiple words.
Kind regards
Claes
-
ORA-00439: feature not enabled: Flashback Table
If someone could help because I do not know why I get the error at the end of the script.
Thank you very much
CODD> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production PL/SQL Release 11.2.0.2.0 - Production CORE 11.2.0.2.0 Production TNS for 32-bit Windows: Version 11.2.0.2.0 - Production NLSRTL Version 11.2.0.2.0 - Production CODD> create table test (cola number) enable row movement; Table created. CODD> drop table test; Table dropped. CODD> select original_name, operation, ts_name, droptime from recyclebin; ORIGINAL_NAME OPERATION TS_NAME DROPTIME -------------------------------- --------- ------------------------------ ------------------- TEST DROP USERS 2014-01-08:13:08:27 CODD> flashback table test to before drop; Flashback complete. CODD> insert into test values(10); 1 row created. CODD> insert into test values(20); 1 row created. CODD> select current_timestamp from dual; CURRENT_TIMESTAMP --------------------------------------------------------------------------- 08-JAN-14 13.10.50.330000 +00:00 CODD> insert into test values(100); 1 row created. CODD> flashback table test to timestamp timestamp '2014-01-08 13:10:50.00 +00:00'; flashback table test to timestamp timestamp '2014-01-08 13:10:50.00 +00:00' * ERROR at line 1: ORA-00439: feature not enabled: Flashback Table CODD> commit; Commit complete. CODD> flashback table test to timestamp timestamp '2014-01-08 13:10:50.00 +00:00'; flashback table test to timestamp timestamp '2014-01-08 13:10:50.00 +00:00' * ERROR at line 1: ORA-00439: feature not enabled: Flashback Table
You use the Express edition. This includes no Flashback Table.
-
Turn on closed captioning power without using the playback controls?
Hi there - I'm going to set up a movie I want to see the to use the playback controls.
Is there that a the end user can enable/disable subtitles without using the CC button that normally appear in the playback controls (because it won't be there)?
Thank you
You can create a button or click box that toggles the CC variable and him allow this way.
Maybe you are looking for
-
Can I activate ask to buy family sharing for an account that is not an Apple ID for student?
I have a friend added to my family account that keeps buying in-app purchases. I want to activate ask to buy, but it's not an apple for the student ID. IS this possible? Post edited by: heyvirgil
-
is it possible to reinstall windows 8 if I did a full install of windows 7
When I bought my laptop it have windows 8 but I do not like it and I have a lot of bugs on my games so I installed windows 7 complete and delete everything on my hard drive. I couldn't find product keys even when package, laptop etc. my laptop is g6
-
Device audio problem / its satellite 2450-101
My sound has kept silent for while now. I didn't know about the volume control sneaky hidden on the side of my laptop, so I've done all sorts... Today, I was so desperate to hear certain sounds (a little knowledge is a dangerous thing) that I played
-
authentication of face in labview
I'm doing a project on the face using labview .i authentication uses vector quantization algorithm. I just started my project. can anyone suggest me how to vectorize an image?
-
Can I switch to an Intel Pentium D 945 on a card mother Napa-GL8E?
Hello, I have a HP Pavilion a6403w with an Intel Dual - Core processor E2160 (1.8 GHz) on a card mother Napa-GL8E. I would like to know if it is possible to switch to an Intel Pentium D 945 (3.4 GHz) on this motherboard. Before that everyone goes to