Enabling Security Center - how to?

Similar Questions

• Security Center, to get the message: Security Center service is not started or was stopped. How can I enable Security Center?

  Centre of security gives her box that says the service "Security Centre" has not started or was interrupted.  Please close this window, restart the computer (or start the "Security Center" service), and then open the Security Center again.  I don't have no idea how to do to restart the service "Security Centre", but I rebooted the computer, same results.  Have updated with the latest changes and entries of security from the web site of Ms.  Under XP and IE8.

  Hello

  If I understand correctly, you are faced with the question with the Security Center.  I would like to know more information about the State of the question.

  1. have you made changes on the computer before this problem?

  2. do you use a third-party security software on your computer?

  Let us try the following steps to start the Security Center service; I'm sure this will help you to solve the problem.

  a. press the Windows key + R and type Services.msc and press ENTER.

  b. Locate the Security Center service.

  c. right-click the Service, and then click Properties.

  d. click the startup type and replace automatic.

  e. Click Start and then click Ok to save the changes.

  Also see the following Microsoft article:

  http://support.Microsoft.com/kb/919291

  Please reply with the status of the issue, so that we can better help you.

• Firewall: I recently removed rather anti-virus software, but windows Security Center indicates the firewall of trend is always on on how to get rid of it or turn it off.

  I recently removed stretch your antivirus software, but windows Security Center indicates the trend the firewall is always turned on. How can I get rid of it or turn it off.

  Hello

  Control Panel - Security Center - How do I uninstall my Trend Micro using the Trend Micro program
  Diagnostic toolkit
  http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  If the problems, check with the support of TrendMicro.

  TrendMicro - Support
  http://eSupport.trendmicro.com/consumer/default.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to enable Windows Security Center Service.

  Hi am Daniel and I have a Compaq Presario CQ62 with OS window7 home top of range. I have a problem with my windows Security Center. I get this alert that my security service center has been disable so I should activate it, but I tried so many times but nothing helped. Because of this some programs and software work really. Please help me on how to enable the Security Center. Thank you.

  Hi daniel,.

  Please see the following thread similar with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Security-Center-wont-turn-on/98af8efc-dbba-4ECE-b678-34b63310bb81

  I hope this helps!

• How can I enable virus protection in the Windows Security Center after he died suddenly?

  This has always been on, yesterday it shuts off and cannot find a way to get it back on.  My computer already has Symantec Protection.

  Hi Gtrela,

  In addition to the suggestion of Cyber_Defend_Team, try the following.

  1. don't you make changes to the computer before the show?

  2. what happens when you try to activate antivirus protection?

  You can read the following article and check if it helps:

  Windows XP Service Pack 2 (part 3): the new Security Center

  http://support.Microsoft.com/kb/889737

  Windows XP Service Pack 2 (part 5): Virus protection

  http://support.Microsoft.com/kb/889739

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My action Center tells me windows Security Center service is not turned on, but I am unable to turn it on. How do I turn it on?

  I get a message telling me to switch on my windows Security Center, but when I hit the switch on the button I am informed that I can not turn it on.

  Hello

  You should ask this in the responses - forums for your version Windows
  Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  ------------------------------------------------------------------------------------------------

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN

  Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
  Also check the serices dependent as below.

  References to Vista also apply to Windows 7.
  
  Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN

  Check the default services and dependencies to ensure that they are running.
  http://wiki.blackviper.com/wiki/Security_Center

  You may need to redefine ALL the Services on their default values.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  ====================================

  To look for the Windows 7 KB and responses for Solutions (most are above).

  Searck of Ko &-> 1058 Security Center
  http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

  Search KB &-> 1079 Security Center
  http://support.Microsoft.com/search/default.aspx?mode=a&query=1079+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

  I hope this helps.

• How can I activate my Windows Security Center Service?

  Original title: windows security...
  How can I activate my Windows Security Center Service? Whenever I press the button to turn it on it says that it cannot be started. What should I do?

  Hello

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN

  Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
  Chech also the serices dependent as below.

  References to Vista also apply to Windows 7.
  
  Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN

  Check the default services and dependencies to ensure that they are running.
  http://wiki.blackviper.com/wiki/Security_Center

  You may need to redefine ALL the Services on their default values.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  ====================================

  To look for the Windows 7 KB and responses for Solutions (most are above).

  Searck of Ko &-> 1058 Security Center
  http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

  Search KB &-> 1079 Security Center
  http://support.Microsoft.com/search/default.aspx?mode=a&query=1079+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

  I hope this helps.

• How can I fix registry REG_DWORD START 0 X 00000004 (4) to start Security Center

  I have windows xp sp3 and I recently brought a malware that turn off my Security Center. SpyBoot s & d show me
  SBI $2E20C9A9 after scanning. How can I fix? I am a beginner.
  Thank you.

  When a Service has a 4 start type in the registry, it means that the Service is disabled.

  Spybot has detected and and earns you an information (not necessarily an error) message that your XP Service Security Center is disabled.  In most cases, it would be active and running.

  Spybot (or other applications) cannot say if you did it on purpose, or some malicious software has done to/for you, then it will give you an option to ignore or try to fix it.

  Unless you disabled the Service yourself on purpose or installed some type of security software on your system replacement to replace the XP version, I think that the Security Center Service could be running.

  XP Security Center is not incompatible with Spybot, so I'd be suspicious of the informative message (not necessarily an error message) and understand what is happening.

  Some things that you may have installed to disable some Security Services XP for you, you may have a malware infection, or the Service might just be disabled and you will need to enable it, start it, and set it to auto-start.

  I do not think that things in the article 313222 is the starting point, but I'm not a technical support engineer.

• Windows tells me Virus Protection is enabled, but is its status as Windows Security Center in a format that is no longer supported

  I have through Trend Micro antivirus protection, windows tells me Virus Protection is enabled, but is its status as Windows Security Center in a format that is no longer supported.  How can I fix this in Windows.

  Hi Nancy DeVries

   

  Have you tried to uninstall and reinstall the anti-virus software?

   

  The problem could be linked to the current settings for the Trend Micro software. Then I suggest you to contact the assistance and control software support team.

   

  I hope this helps.

• "General COM security issues: how to enable or disable DCOM?

  "General COM security issues: how to enable or disable DCOM?

  Hello n6neb1,

  1. what problems are you having with Dcom?

  2. What is the operating system installed on your computer?

  You can refer the link that will give you information on this below.

  Enable or disable DCOM on Windows 7

  How to disable DCOM support in Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• How can I restart my Security Center... I get an alert that he was arrested.

  I received an alert that my Security Center has been arrested and must be restarted. How do I do that?  Restarting my computer is not doing...

  Hi BettyWicker,

  Follow the steps in this document.

• How to get the Security Center to turn on MY

  I hope that the answer to this will not take as long as he did to register on this site to ask a question...!

  MY is all green with a check mark (icon on bottom RHS of the screen.  However, the Security Center said no active antivirus.  Please tell me (in simple terms - I'm not a computer Wizard) how to get the SC to activate MY.

  Thank you.

  Hello

  Sometimes, it is a bug that occurs, especially after installing MSE for the first time. Restart the computer and see if the Security Center successfully, then reports that you are protected by an antivirus.

  If restarting the computer does not resolve it, try the following fix - http://social.microsoft.com/Forums/en-US/c0ca9eb2-14b0-4591-be85-4b7fd1700191/windows-security-center-wmi-fix-onecare-green-security-center-at-risk

  Kind regards

  Patrick

• How to stop Security Center from microsoft that I have my own firewall and anti virus?

  Original title: Microsoft security center

  How to close the Security Center that I have my own firewall and anti virus?

  Hi waynejackson64,

  Follow these steps:

  (a) click Start, Control Panel, Security Center.

  (b) double click Firewall, and then select Disable the firewall.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

• I had Security Center windows 2011 which is a virus.how do that I get rid of it, it won't let me do the web thanks to warnings from the Security Center

  I had Security Center windows 2011 which is a virus.how do that I get rid of this, it doesn't let me do the web thanks to warnings from the Security Center, because it maintains changig my web page

  info at the bottom of this website-

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

• How can I remove Windows Security Center on my computer.

  I would like to delete my computer Windows Security Center and replace it with System Mechanic.  I have Windows XP Home Edition.  Can someone tell me how to remove it?

  Windows Security Center is part of the operating system and cannot be deleted. If you want to disable:

  Start > Run > services.msc [Enter]

  Security Center scroll down and double-click it to open the properties. Stop the process to run and change the start to "disabled". MS - MVP - Elephant Boy computers - don't panic!