Encarta Dictionary works do not mistake: this service could not be searched because you are not connected to the Internet. Connect, and then try again

Original title: Encarta Dictionary (not searched)

Encarta dictionary does not. I get the message "this service could not be searched because you are not connected to the Internet.  Connect, and then try again. "However, I am connected to the Internet.

Hello

1. don't you make changes to the computer until the problem occurred?

I suggest you try the steps mentioned below and check if it helps.

Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

 

How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135

Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

Hope this information is useful.

Tags: Windows

Similar Questions

  • Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

    Hello

    Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

    Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).


    I did a few Google and found that we need to add something in the Essbase.cfg file as below.

    Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

    Possible problems

    Analytical services cannot lock enough blocks to perform the calculation.

    Possible solutions

    Increase the number of blocks of analytical Services can allocate to a calculation:

    1. Set the maximum number of blocks of analytical Services can allocate at least 500.
      1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
      2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
      3. Stopping and restarting Analysis server.
    2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
    3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.

    In fact in our queue (essbase.cfg) Config Server we have given below added.

    CalcLockBlockHigh 2000

    CalcLockBlockDefault 200

    CalcLockBlocklow 50


    So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.


    Kind regards

    Naveen

    Yes it must *.

    Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

  • Impossible to install the bluetooth driver in XP Mode, error "this software cannot be installed remotely. Please connect to the local computer, and then try again.

    I have win 7 pro as my OS, whenever I try to install the bluetooth driver in xp mode, I get an error message saying "this software cannot be installed remotely. Please connect to the local computer, and then try again.

    Check this box:

    http://support.Microsoft.com/kb/2438651/en-us

  • When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

    I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

    screen A___
    WMC has discovered the following:
    Analog cable (1 Tuner)

    Other tuners or TV signals were detected but will not be configured.
    (Show details)

    Is this Setup correct and complete?
    o Yes, configure TV with these results
    o no, show more options
    ________________
    When I click on show details, it is said:

    screen B___
    No TV Signal
    If a TV signal should be present, check your signal for following tuners connections and try again:
    Hauppauge WinTV 418 BDA Tuner
    ________________
    There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

    When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

    I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

    I would really appreciate any help and if more details are required, please let me know.  Thank you!

    -Doug

    I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

  • Windows cannot find not '(null) '. Make sure you typed the name correctly and then try again. What does this message mean?

    I don't see any of my desktop shortcuts, nor can I open all the files. This message appears after a minute or so, when I click on the start menu and select my programs.

    Can anyone tell what it is and how to fix it?

    Well, what is... odd to say the least.

    It seems that this error occurs in many circumstances, so could you tell if you have anything installed recently, as IE7.

    It also seems that it could be the work of a virus, so I recommend you download free version at http://www.malwarebytes.org/ Malwarebytes and does not perform a scan.

  • not working Windows 8 key error "we can't connect now check your internet connection, and then try again.

    Original title: windows 8 key does not.

    Hello everyone

    I am posting this after about 4 days of trying literally everything what is written on the internet.

    I have a legit windows key 8 I bought when windows 8 launch and have installed a clean install of windows 8 as many times, this previous Monday, that I fell on the error

    We can not connect now check your internet connection and try again.

    for the last four days, I tried all that you have to try, setting clock, update windows 7, disabling AV and firewall, still called supported from microsoft and they have taken control of my laptop for about an hour and tried to make it work, but it didn't.

    Now, I tried my key on a laptop of friends and its connection to the network that are completely different from mine, got the same error, so I asked him to try his own key and HE WORKED his key was working at the mine was not. I never gave my key to anyone, nor to my knowledge we never used it, I'm sure that this is the key that is the problem now. How can I get this problem?

    Thank you.

    Try to activate Windows 8 by telephone as follows:

    Press the Windows key + x then click Run, then type: slui.exe 4
    (Another method: press Windows + r and then type: slui.exe 4)

    Then press the ENTER"" key.

    Select your "country" in the list.

    Choose the option "activate phone".

    Stay on the phone * do not select/press any option * and wait for a person to help you.

    Clearly state your problem to the support person.

    ================= Alternatives ===================================

    Microsoft - U.S. support
    http://support.Microsoft.com/contactus/?PID=17655&TID=100109454

    Microsoft - UK support
    http://support.Microsoft.com/contactus/?ln=en-GB

    How and when to contact Microsoft and support Customer Service:
    http://support.Microsoft.com/kb/295539
    Clearly explain your problem to the support person and they will transfer you to the activation service

    How to contact a Microsoft Product Activation Center by phone:
    http://support.Microsoft.com/kb/950929

    To get a list of telephone numbers see method #1

    J W Stuart: http://www.pagestart.com

  • My lightroom does not open. I get an error message saying "windows cannot find"C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe". Make sure you typed the name correctly and then try again"when nothing is irrelevant.

    Please help me. I uninstalled all lightroom related and reinstalled and nothing works!

    Hi noelc,

    This is related to the problem of association of files on the Windows platform. Other applications works very much like Photoshop.

    Please completely including current uninstall Lightroom and the old version of it.

    Restart the Machine (very Important)

    Reinstall the application from Creative Cloud Desktop App (disconnect & connect away from getting the latest version of Lightroom)

    Kind regards

    ~ Mohit

  • sound recorder, no not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again.

    I tried to use sound recorder to test a microphone and it came with an error message after pressing the record and then he said, sound recorder, not stop not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again. This issue is out of nowhere because he has never had this problem before. It's a brand new computer that ive built from the bottom up, and I have 4 GB of memory. only a little more than 2 is actually identified by windows xp, however. Ive looked in the Task Manager and it says I have 2 GB of free, so I don't know what to do

    Hi superconfused123,

    This problem occurs because of a design limitation in the tape recorder.

    You can check the link below: you receive a "not enough memory to complete this operation" error message when you try to record a .wav file using sound recorder: http://support.microsoft.com/kb/284893

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Player will not play error of MTS files that your computer works at low memory. Quit other programs, and then try again

    I am running Windows 7, 64 bit, home premium on a Dell Studio 1558 with an ATI Mobility Radeon HD4500-5100 graphics card and an Intel Core i3. It has 4 GB of RAM.

    When I try to read files MTS using Windows Media Player I get the error message "your computer is low on memory. Quit other programs, and then try again,"even with no other programs running. Windows Media Player will play other types of video files without difficulty.

    Any suggestions as to what can be the cause of the problem and how to fix?

    TBH I'm not sure.

    All I can say is on my desk, I have not loaded a pack of codecs only support of any kind and WMP12 plays my MTS files very well. Supported by this statement in Windows Media Player 12 is also capable of playing AVCHD formats (. ) M2ts et . MTS ). [13]" from - http://en.Wikipedia.org/wiki/Windows_Media_Player and the fact that in WMP12 - "Media files (all types)" MTS has listed as an acceptable format.

    My office has an AMD/ATI HD5670, and like I said seems to play.

    1. Have you tried to run a full anti-recent virus scan? If this isn't the case, update your antivirus program and run a scan full to see if it finds problems.
    2. Then try a sfc/scannow scan to see if it detects and fixes something.
    3. Just checked, you have installed WMP12? (it should be, but just a double check).

    This type of problem (or similar) has developed before items such as http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-and-low-memory-issues/bb4bf226-8bd0-41A5-9eed-9be08e6d3bdb and  http://www.TomsHardware.co.UK/answers/ID-1699934/computer-running-low-memory-Windows-Media-Player.html and some people said re-register the DLL of WMP files helped. Personally, I've never needed to test or try this kind cannot confirm.

  • We get an error "the driver of the scanner supported by this software is not installed." Install it and then try again"after the installation of MP Navigator

    * Original title: drivers Canon MP160 printer (scanner-MP navigator) on issues of Win8

    Hello

    I bought a win8 system. I tried to install the Canon MP160 driver on the system.

    Had trouble at the start, but was able to install in compatibility mode for win 7, which solved the problem of the printer.

    Now I have problems with the installation of MP Navigator to scan.

    I am able to install MP Navigator but receive error message "scanner driver supported by this software is not installed.» Install it and then try again."

    Help, please.

    Pavan Sandur

    Hi Pavan,

    Thank you for the information.

    You can uninstall the drivers from Device Manager and try to install the latest versions to check the issue.

    If the problem persists, try to install the software of the browser in compatibility mode and see if that fixes the problem.

    http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

    You can also get in touch with the Canon Support for assistance on their products and compatibility.

    http://www.Canon.ca/inetCA/contactus?m=loadcontactus&lang=en&commId=3&typeid=1&msegid=2

    It will be useful.

  • I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

    I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

    No one can tell you anything without the info adequate system or other technical details, including the exact error message.

    Mylenium

  • Halo: Combat Evolved for PC works only on Windows Vista - Error Message "" unload the debugger, and then try again."

    I'm having a problem running Halo: Combat Evolved on Windows Vista. I can insert the disc and install the game without problem. The problem is that when I try to launch the game, I get error message saying "" unload the debugger, and then try again." I tried to install some of Halo patches to see if that would fix the error (for example, 1.6 and 1.7), but when I try and open the patch .exe file I get an error message telling me to go to a microsoft Web site or try to update the game manually. In addition, I tried to contact Gearbox Software to see if they could help me, all they said was to contact Microsoft.

    Does anyone have any suggestions as to why the game does not work for me and how can I make it work?

    Let me know, thanks. :)

    Hello whyohwhy42,

    I suggest that you follow the section below. This includes various possible steps to solve this problem:

    http://support.Microsoft.com/kb/812759

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

    Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

    I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

    Ron, I have something for you!

    and for all the people who have this problem :)

    Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

    Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

    The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

    Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

    My TV works and looks okay now.

    It actually works!

    the only problem is that it is not in HD

    but there is something


  • I get this error message 'some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

    Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.  But all the content loads correctly, and it just seems to be an annoying error message.  Does anyone know how I can get rid of this or that which is the cause.  Site is: http://davidkimlaw.com

    You solve the symptom and not the problem. If something is to change the files after they are exported from Muse, the consequences could be vast and varied download to download.

    Don't the accordion on the 'AREAS' jobs page widget if this file exported (and unaltered) opens in the browser on your local computer? It doesn't seem to work on the online site, which could be linked to the questions of the error was about or may be an offshoot of some hand changes were made after export.

    If you empty the re-export of Muse in a folder and then download the same files, I'll take a second look at what's going on. If you wish, you can you could do that in a subfolder so as not to disturb the live site. (When I detected that the index.css file is out of sync I was on my phone and could not go any further.)

    There is also more information about the possible causes of this error here "some files on the server may be missing or incorrect" Warning Message>.

  • I always get this message: some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

    It seems to happen whenever a update of Muse coming...

    I'll transfer my site and when I visit it I get this message even that was supposed to be resolved there are a few versions:

    "Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

    I use the latest version of Muse: 2014.3 release

    I looked at my list of assets within the Muse - nothing is marked not linked.

    I tried to upload my site many times... within the Muse and with FileZilla.

    Fortunately, I have saved the latest version of my site - which was created in the version prior to 2014.3 - and downloaded again.  It works and can be seen here: www.snapscene.ca.

    But as soon as I make all the changes file of Muse, save it under a different name (to be compatible with 2014.3) and upload it - I get the message when visiting the site.

    What gives?

    -Adrian

    It seemed to me the solution.

    When I export the files, I simply left Muse overwrite the files in the destination folder. The files may not overeritten correctly.

    Manually, I went into this folder destination and destroyed all the old files exported.

    I then re-exported the files and then uploaded. All workes from there.

Maybe you are looking for

  • Calendars and tasks of thunderbird 38.3.0 disappeared

    The components of my tasks and calendars have disappeared, all the links (menu, buttons, status bar) have disappeared. I tried to install Lightning page modules, several times, nothing happened. I have restarted Thunderbird and Windows several times.

  • set the proxy settings

    I support approximately 1,000 customers and my manager has approved the use of FireFox with a condition that we put a proxy and it is whenever a user starts Firefox. I would like a VB Script that affects the proxy settings every time you start Firefo

  • Storage does not

    I was wondering what could be so different in storage from my old mac to my new mac. I seem to have on the same applications on my Mac, but somehow theres a huge difference between the used storage to applications on my new mac than my old mac. I tri

  • Use getchannels to switch different channelgroup channel

    I'm moving all my channels flow in Group 4.  they are currently spread across several channelgroups. Dim oMyChn Dim oMyChannels Set oMyChannels = Data.GetChannels("*FLOW*") For each oMyChn in oMyChannels CallMsgBoxDisp (oMyChn.Name) CallData.Move (da

  • How can I connect to windows vista Home premium withou admin password

    How can I connect to windows vista Home premium withou admin password