Encryption ReadyChache SSD?

Similar Questions

• Cloning of SSD HD via active with Filevault disk utility

  Hi all

  I want to improve my HD to SSD.

  I intend on using disk utility for recovery mode to clone my HD to a Virgin SSD I bought.

  I must, however, Filevault enabled on my HD.

  It will be a problem when it comes to cloning the drive?

  Thank you

  Adam

  No, it shouldn't be a problem. It may be necessary first turn on FileVault and encrypt the SSD. But if there is no problem just turn off FileVault on the HARD drive.

• The support of SG300 - 10 TEAR?

  Hello!

  In the documentation for the CLI of the SG 300 series, it shows sh ip rip road as a command. I installed the latest firmware and this command is no longer available. Support of the SG300 series TEAR?

  Thank you!

  Richard S.

  Hello Richard,.

  My name is David Aguilar, and I am an engineer with Cisco Small Business Center. Thanks for writing.

  The SG300 series can't RIP. Only static routes (up to 32) are supported. However, models of SG500X support the dynamic routing RIP version 2 Protocol.

  Regarding the new firmware Sx300, he added a number of security features impressive including inspection IP ARP, DHCP snooping and encryption of SSD.

  All the best,

  -David Aguilar

  Cisco Small Business Support Center

• After that the SSD has been deleted, is it too late to use encryption for more security before selling?

  My goal is to make my data inaccessible to the person who will buy my Macbook opportunity. While I'm fully aware that this is an almost impossible task to delete really an ssd, I read that if you encrypt everything before you wipe the drive and reinstall the OS, at least, the recovered data can be read.  However, I read these seemingly wise advice AFTER I had already deleted my Macbook and reinstalled the operating system.  So, the question is with my 'deleted' data and the operating system reinstalled, activation of encryption at this point will achieve my goal, or still will remain unencrypted data previously of the ' erased '?

  Thanks in advance for your answer.

  She will remain unencrypted.

  (144856)

• Portege Z30 - B - 10 c: is THNSNJ256GMCU SSD supports hardware encryption

  I have a Toshiba Portege Z30 - B - 10 c with 256 GB SSD (exact model THNSNJ256GMCU).
  On the Internet I found weather mixed info, this drive takes in charge or no material encrytpion.

  Could someone help me find the answet to this question and, if it supports encryption.

  How to activate it?

  THNSNJ256GMCU

  Main features
  • Capacities up to 512 GB
  • Available in four Standard form factors
  • MLC NAND Flash memory
  • Low-power Devsleep feature support
  • The end-to-End data protection
  • Gravitational quadruple Code technology (reverse)

  More features
  • Translation mode which allows all disk configurations
  • Hot plug/OS-Aware removal
  Exclusive Toshiba • error correction technology, reverse (Quadruple gravitational Code Technology) support
  • Read only mode supported for emergency

  http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html

• HP EliteBook 8570p SSD SED - encryption

  Hello

  I ran HP protecttool securty Manager drive encryption. The whole process takes only a few minutes. This means that all existing data will be not encrypted? Or it will be encrypted asynchroneously over time?

  Kind regards

  Mark

  Micron SED (SSD)

  Windows 7 Professional 64 bit

  Hello PerzyKlom,
  Welcome to the HP Forums.
  
  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can click here for the link.
  http://h30499.www3.HP.com/hpeb/
  
  Thanks for posting on the HP Forums.

• zBook 15 - SSD encryption problem

  Good afternoon everyone,

  I get the error message below.

  "An error occurred during initialization authentication pre-seed. (0x9a00).

  The problem is the following:

  1. Image, pushed to the machine using the Clonezilla software. It is a standard construction we have on most laptops.
  2. On-board HP encryption enabled. Recovery stored on USB key.
  3. Laptop has been used for a few weeks.
  4. Someone tried to install software of BeCrypt encryption on the machine.
  5. This, as expected (I wish they'd asked first), completely messed up the machine.
  6. When starting, we still got the encryption authentication screen. After the password, he would try to start windows and BSOD.
  7. To try to remedy the situation, I entered the password encytption and before she started windows, open a CMD window.
  8. Using DiskPart I wiped the drive and reinstalled Windows 7 from CD.
  9. The machine worked, would start through encryption (password entered as usual) and then in the new installation of Windows 7.
  10. Thinking that everything was OK, I relayed the Clonezilla image once more (without disabling the encryption)
  11. The machine now give the error at the top of the pole and the recovery key refuses to play ball

  No matter what anyone thinks could work to solve this problem and save the SSD?

  Thanks in advance

  FN

  Hi fenewman,

  Your ZBook 15 is a commercial product and get your question more exposure, I would say post in the trade forums. Here is a link to the forum Commercial Notebook.

  Thank you

• Editing a file to remove confidential data from a solid state drive (ssd)?

  I understand that El Capitan has removed the option "Secure Empty trash" because of hard drives (ssd) state how strong. So, I try to understand how I can work around it.

  Let's say I have a Pages or Word file with a list of names that should be kept confidential, and I want this file to the trash.

  What happens if I change the file to remove these names? Removing ssd data? Can I trash then the file as usual without worrying about confidential data remaining on the ssd?

  Or what should I do if I replaced the confidential names with something? For example, if I was John Doe on the list, what happens if I change to be John xyz? XYZ crash Doe on the ssd?

  No it doesn't, use FileVault to encrypt the contents of the disc.

• Securely erase SSD using Filevault

  I am about to sell my MBP of 2009 with a 1 TB SSD.  I know that I can securely erase the drive as a traditional mechanical flat disc and if recommended someone following that sounds quite secured using filevault.  I'm aware that it can take a while to do but I am not hurry and eager to go through the process if indeed offers an additional layer of security if someone decides to hack.  I would that all expert opinion on it given that I don't consider myself a genius of Apple, or a guru on the SSD technology and encryption:

  1 turn on Filevault and implement a complex password of decription. (Note that it may take hours to encrypt the drive)

  2. once the drive is encrypted, start in recovery mode and erase the drive.

  3 reinstall the operating system and then turn on Filevault with a different password. (Shouldn't take as long to encrypt because there is very little data)

  4. boot into recovery mode, once more and wipe the drive.

  5 reinstall the operating system.

  Theoretically, all the old original data are an encrypted mess.  Also, the first Filevault password was erased and encrypted after the second installation of the OS.

  Probably no reason to go beyond 2 except to the reinstall the OS.

• My Mac is hacked! Encryption help please!

  My Mac Pro is hacked, and this is confirmed by the engineers. Because the Mail app and even online ISP mail did not work if good PSI hunted hackers. I found files fragmented on 240 and 480 GB Intel SSD drives into the slots of the T2 drive: files named "sparse disk image...". ' and ' package of rare records...' appeared in the root of the readers. I could easily remove them. But I never put there. At the same time, Apple Mail app kept resetting ports 993/587 (course) to ports 143/25 (very insecure). Post font size 23pt appeared, ads corrupted font, file extensions book would not appear or would disappear, etc, etc, etc. The internet connection was bad too, so I called my ISP. ISP found twelve 12 computers in windows using various applications on my system. None of the computers used found languages where I live. Pirates. I also have an airport with a cap of 2 TB, and it is probably also diverted. Nothing in my system is encrypted. I just use firewall, even if it does not get somehow.

  Advise main suggested Apple should I encrypt my records. But these fragmented files were already there. Which indicates that someone somewhere on Earth was already encrypt files on my system. The adviser said fragmented files are a pretty good indication that its time to get more proactive. If my plan is to use disk utility to wipe my internal drive OS, OS X Extended (journaled encrypted). Then install OS X on the disc encrypted EAS - 256 bit.

  For those who have experience of encryption Mac

  1.) encrypt and install OS X on the encrypted drive wise?

  2.) how to clear all present airport Time Capsule content, encrypt Time Capsule and use it with my encrypted system?

  3.) how to encrypt external disks and use them with encrypted Time Capsule and encrypted internal drive?

  (4.) how to manually copy files from encrypted disks (mainly SSD external drives) of other backup disks which are normally cold (disconnected) for monthly backups of cold. "

  5.) monthly cold copies remain unencrypted?

  I worked with Mac since the 1980s. You can ignore it, but here are my thoughts: encrypt just the disk won't do much. I am surprised that the Apple engineer suggested this. If your Mac is compromised (depending on the ISP see Windows for access to the you that seems reasonable) the things MOST IMPORTANT to do is eliminate the hack code. If you encrypt the disk with the hack still there it is more likely will always have access to the data. Before going that all keep in mind that you probably allowed the hack in installation of the software on the web or by opening an attachment with the hack. So everything you try to remember what helped you ensure that you wouldn't do it again.

  You should consult your application package to see if there is something that you don't recognize or recently installed before the problem and remove before you try anything because it is possible the cut is integrated into an application. Remember that almost all hacks are hidden in the system and not easily seen so you probably won't find it. My approach is to install a charge/clean OS X, then copy your applications and your data.

  There are many approaches to this problem, but here's what I think, this is the simplest approach IF you have access to a second mac AND hack code doesn't do not part of one of your applications.  You said not what type of Mac you have or the system or if you have access to other Macs. My proposal would be based on that. Since you are in a jam here are a few options:

  If you have more than one Mac and an external hard drive:

  1. start the mac infected in target mode: restart and as soon as it chimes hold "T".

  2 connect the Mac, because I know you can't tell how. You can google it.

  3 format an external hard drive to use as a target of installation for El Capitan.

  4 download and install El Capitan on the Apple App store and install it on the external drive.

  5. after starting upwards, when asked if you want to copy applications and data to another Mac say Yes and let it copy the applications and data from the infected Mac internal drive.

  6. Once installation is complete it should start from the outside, test your system for ensure that everything works, you have all your dataand see if the problems are eliminated.

  7. If it's good, when it is started from the outside:

  8 download Super Duper or carbon copy. (I use SD).

  9. use disk utility in the folder utilities to clear the internal drive.

  10. copy your external drive to the internal drive, it will be deleted.

  11. when the copy is complete, stop the Mac and disconnect the external hard drive.

  12. start the Mac, go to Preferences-> floppy boot, then selected your internal drive system, she might want to restart. This step is optional, but if the boots aren't made can be more slow that the Mac external drive first.

  If you have access to an external hard drive:

  Remember that although it would probably be fine, there is a slight possibility that this can infect a connected drive, this is the case, you must use multiple macs above approach. But it's something you can try if you don't have a second mac.

  * Skip steps 1-2 above and do the rest on the infected mac.

  If you do not have an external drive, you can use a large USB but it will be much slower. Good luck, I hope that others will come to the top with options. But it's what I would do.

• APPLE SSD SM0512F configuration - 499gig virtual disk?

  I was wondering if it is a normal Setup for an APPLE SSD SM0512F found at the end of 2013 Macbook pro retinas

  I was wondering why "disk1" is virtual. Its capacity is 499gigs, it is the last element in the output of the terminal.

  Thank you!

  see you soon

  JB

  Here is the output of the terminal of ' diskutil info - all the»

  Jack: ~ info jackbaker$ diskutil-all

  Identifier of the instrument: disk0

  Device node: / dev/disk0

  Overall: Yes

  Part of the whole: disk0

  Device / media name: APPLE SSD SM0512F

  Volume name: not applicable (no file system)

  Gendarmerie: Not applicable (no file system)

  File system: no

  Content (IOContent): GUID_partition_scheme

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Total size: 500,3 GB (500277790720 Bytes) (exactly 977105060 512-Byte-units)

  Amount of free space: not applicable (no file system)

  Device block size: 512 bytes

  Support read-only: No.

  Volume read-only: not applicable (no file system)

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  Virtual: No.

  OS 9 drivers: No.

  Low Level Format: unsupported

  **********

  Identifier of the instrument: disk0s1

  Device node: / dev/disk0s1

  Set: No.

  Part of the whole: disk0

  Device / media name: EFI System Partition

  Volume name: not applicable (no file system)

  Gendarmerie: Not applicable (no file system)

  File system: no

  Partition type: EFI

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Volume UUID:

  Disk / Partition UUID:

  Total size: 209,7 MB (209715200 bytes) (exactly 409600 512-Byte-units)

  Amount of free space: not applicable (no file system)

  Device block size: 512 bytes

  Support read-only: No.

  Volume read-only: not applicable (no file system)

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  **********

  Identifier of the instrument: disk0s2

  Device node: / dev/disk0s2

  Set: No.

  Part of the whole: disk0

  Device / media name: MacintoshHD

  Volume name: not applicable (no file system)

  Gendarmerie: Not applicable (no file system)

  File system: no

  Partition type: Apple_CoreStorage

  Operating system can be installed: No.

  Recovery disk: disk0s3

  Media type: generic

  Protocol: PCI

  Smart: checked

  Disk / Partition UUID:

  Total size: 499,4 GB (499418030080 Bytes) (exactly 975425840 512-Byte-units)

  Amount of free space: not applicable (no file system)

  Device block size: 512 bytes

  Support read-only: No.

  Volume read-only: not applicable (no file system)

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  This disc is a physical storage Volume (PV) Core.  Basic information from storage:

  PV UUID:

  LVG UUID:

  **********

  Identifier of the instrument: disk0s3

  Device node: / dev/disk0s3

  Set: No.

  Part of the whole: disk0

  Device / media name: Recovery HD

  Volume name: not applicable (no file system)

  Gendarmerie: Not applicable (no file system)

  File system: no

  Partition type: Apple_Boot

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Volume UUID:

  Disk / Partition UUID:

  Total size: 650.0 MB (650006528 bytes) (exactly 1269544 512-Byte-units)

  Amount of free space: not applicable (no file system)

  Device block size: 512 bytes

  Support read-only: No.

  Volume read-only: not applicable (no file system)

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  **********

  The instrument identifier: disk1

  Device node: / dev/disk1

  Overall: Yes

  Part of the whole: disk1

  Device / media name: APPLE SSD SM0512F

  Volume name: MacintoshHD

  Gendarmerie: Yes

  Mount point: /.

  Personality of file system: HFS journaling +.

  Type (Bundle): hfs

  Name (Visible to the user): Mac OS extended (journaled)

  Journal: Journal size 40960 KB at the offset 0xe8f000

  Owners: enabled

  Content (IOContent): Apple_HFS

  Operating system can be installed: Yes

  Recovery disk: disk0s3

  Media type: generic

  Protocol: PCI

  The SMART State: Not supported

  Volume UUID:

  Disk / Partition UUID:

  Total size: 499,0 GB (499046809600 Bytes) (exactly 974700800 512-Byte-units)

  Amount of free space: 26.5 GB (26546237440 Bytes) (exactly 51848120 512-Byte-units)

  Device block size: 512 bytes

  Allocation block size: 4096 bytes

  Support read-only: No.

  Volume read-only: No.

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  Virtual: Yes

  OS 9 drivers: No.

  Low Level Format: unsupported

  This disk is a storage Logical Volume (LV) Core.  Basic information from storage:

  LV UUID:

  LVF UUID:

  LVG UUID:

  Fusion drive: No.

  Encrypted: No.

  **********

  Jack: ~ jackbaker$

  This is the storage system report tab.

  MacintoshHD:

  Available: 26,83 GB (26,825,244,672 bytes)

  Capacity: 499,05 GB (499,046,809,600 bytes)

  Mount point: /.

  File system: HFS journaling +.

  BSD name: disk1

  Logical volumes:

  Reversible: Yes (no required decryption)

  Encrypted: No.

  Logical volume group:

  Name: MacintoshHD

  Size: 499,42 GB (499,418,030,080 bytes)

  Free space: 18.9 MB (18,898,944 bytes)

  Physical volumes:

  disk0s2:

  Device name: APPLE SSD SM0512F

  Name of the media: APPLE SSD SM0512F media

  Size: 499,42 GB (499,418,030,080 bytes)

  Media type: SSD

  Protocol: PCI

  Internal: Yes

  Partition map type: GPT (GUID Partition Table)

  Status: online

  S.M.A.R.T. Status: verified

  28 August at 16:00:19 MacBook-Pro configd [112]: [bootp_transmit.c:213] bootp_transmit(): bpf_write (en0) failed: network is down (50)

• How do I set up FileVault on SSD on El Capitan

  I am running El Capitan on a late 2011 13 "MacBook Pro. Recently I replaced the drive with a 500 GB Samsung 850 EVO SSD. I took out the old drive, plugged into the SSD, rebooted into recovery mode and restored from a Time Machine backup. Everything went well spent - the machine is MUCH more reactive.

  Now, I would like to turn on FileVault. I go through the guests first few and continue to hit and I get a dialog box that reads:

  FileVault cannot be enabled for disk "MacHD".

  Some disc formats do not support the required encryption recovery partition.

  To use encryption, reinstall this version of Mac OS X on a reformatted drive.

  It is in the format "Mac OS X extended (journaled). I guess I need a recovery partition. Is this correct? If so, it can be done on a 3rd party SSD and if so, what is the process? Have I messed up by not having things is not a recovery partition? Moreover, I still have the hard drive that I replaced (the original drive supplied with the machine) and I've not yet washed it.

  Thank you

  If you reinstall the OS X on top of your OS X existing, it will create the recovery partition.

  Download from AppStore > El Capitan

  http://www.Macworld.co.UK/how-to/Mac/how-create-Mac-recovery-partition-OS-x-El-c apitan-yosemite-backup-free-3636717.

  install a new copy of El Capitan from the installation disc.

  With the connected boot drive, start - or restart - your Mac by holding down the Option (also called Alt) key. This will take you to the Boot Manager. Choose to install OS X El Capitan of the reader. Select "Disk Utility" and your hard drive, and then click clear. Return to the main menu and choose Install OS X.

  Once the installation of the El Capitan is complete, you can restore the applications and settings from a Time Machine backup, or download manually.

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• 222GB SSD Partition lost memory

  Here is a previous discussion on the question: Hard Drive Partition space lost

  My question is a little different, after trying to solve some problems on my drive via parallels bootcamp, it separates the EFI disk bootcamp and I accidentally thrown it. Since then, the drivers do not work correctly for bootcamp, I decided to remove and attempt to repartition the disk, but nothing helped. Now I'm stuck with 777 memory max and 222 GB of 'free space '.

  Is that what I can do in terminal to solve this problem? As I was informed is not good reformat your SSD and most likely will not solve the issue.

  I'm under Parallels on OS X El Capitan V 10.11.4 11.

  • Features of the model: 2.8 GHz Intel Core i7, 16 GB of RAM DDR3L edge 1600 MHz

  Please let me know if more information is needed.

  output

  diskutil list:

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 777.4 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 777,0 disk1

  Logical volume on disk0s2

  1DB9470D-1C61-4177-8A86-36DD9C31DC85

  Unlocked encrypted

  / dev/disk2 (disk image):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme + 104.9 MB disk2

  1: Apple_HFS v3.5.1).-iPartition 104.8 MB disk2s1

  / dev/disk3 (disk image):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_partition_scheme disk3 + 69.2 MB

  1: Apple_partition_map disk3s1 32.3 KB

  2: Apple_HFS Paragon Camptune X 69.2 MB disk3s2

  Davids-MacBook-Pro: ~ z0rg$

• BootCamp Windows does not start after you have enabled disk encryption

  Hello everyone, I am in a desperate situation and I need your help. Here is my sitatuaion.

  I have 13-inch MacBook Pro (early 2011). I put an SSD inside as my main drive and I also put an extra drive (HDD) in the optibay instead of my drive superdrive. The structure, I had was this:

  (1) my entire SSD was my OS X disk.

  2 my HDD optibay had three partitions: partition backup Time Machine, a) b) Extra partition (for stuff like media), c) Windows partition with Windows 7 installed.

  Had that Setup for a long time and everything worked very well, my SSD has been saved on the Time Machine partition on the HARD drive in my optibay.

  Then, I decided to turn on the File Vault 2. First of all I did for the SSD with my OS X on it. Everything went well and I could always start my Windows 7. Then, I decided to encrypt my Time Machine backup (because what's the point to encrypt the main system disk if you do not encrypt the backup as well?) -Here too everything went well.

  In other words, until I needed to start Windows. I have restarted my Mac, hold down option, the picker contraption came, but there was no windows to the choice. I came once before (but), so I knew I could always start in it.

  I jumped into my USB thumbdrive with fairing on it, he chose and he gave my start on the Windows partition option. But this time it did not work, I got an error message saying my there is no bootable device or something like that.

  I have confidence in turning the things of encryption for the partition of Time Machine (which is on the same HDD as my Windows partition) screwed disc here.

  The only question is: can I fix, start Windows, without having to install it from scratch? What I want is to have encryption enabled for both drive my main SSD where I have my OS X installed AND the partition of Time Machine that is on the disk in the optibay HARD and also have a Windows partition on it, but still be able to start Windows.

  I am running 10.11.13 El Capitan.

  Can you help me somehow? Here is my list of cs diskutil:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 128,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh 127,2 disk0s2 GB SSD

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage Time Machine 150.0 GB disk1s2

  3: disk1s3 Apple_Boot Boot OS X 134,2 MB

  4: Apple_HFS Extra 300.0 GB disk1s4

  5: Microsoft Windows 49.5 GB disk1s5 data base

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh SSD 2 GB + 126.8

  Logical volume on disk0s2

  406F3A62-89AE-4F91-BEEF-B8CE0B16C8EF

  Unlocked encrypted

  / dev/disk4 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Time Machine disk4 GB + 149.6

  Logical volume on disk1s2

  0567D276-3738-4776-9CC5-B69F922B0A0C

  Unlocked encrypted

  Your problem is not related to FileVault2. Your question should have begun when additional Apple_HFS was created. Please after the release of

  sudo fdisk/dev/disk1

  If you have a problem with your Mac, you can potentially lose the SSD and backup TM. It is not an optimal configuration. A TM must be physically separated from your Mac, so you can restore the TM backup to a new Mac, if necessary.

  Also, since you removed the optical drive, re - install Windows on your 2011 model is a very rough road to travel.