End packets ignored out of frame - relay

Similar Questions

• What devices transmit Frame Relay and how Frame Relay attached to your computer.

  What devices transmit Frame Relay and how Frame Relay link your computer to the internet provider server?

  OT: What devices transmit Frame Relay and how Frame Relay link your computer to the internet provider server?

  Hello

  Frame Relay is a standardized wide area network technology that specifies layers linking physical and logical channels of digital communications using a methodology of packet switching. Originally designed for transport in Integrated Services (ISDN) digital network infrastructure, it can be used today in the context of many other network interfaces.

  Network providers commonly implement Frame Relay for voice (see) and data as encapsulation technique, used between local area networks (LAN) over a wide area network (WAN). Each end-user gets a private line (or leased line) to a frame relay node. The Frame Relay network handles the transmission on a frequently changing path transparent to all end-users.

  Reference: Frame relay applications
  http://TechNet.Microsoft.com/en-us/library/bb726928.aspx

• Between the leased line and frame relay connection

  Hey the Cisco Experts,

  Based on my commitment, I need your advice on how to route packets from users of frame relay to users of leased with bridge lines different. If I use the 192.168.0.102 bridge, I can access the 192.168.4.0 network but not the 192.168.2.0 network. But if I use the 192.168.0.41 bridge, I can access the 192.168.2.0 network but not 192.168.4.0 network. What will be the solution for this problem. What is routing only or need to add another NETWORK card for the other gateway. Hope you could help me with this.

  Kind regards

  Raymond

  Raymond,

  The solution is simple: -.

  "ip route 192.168.2.0 255.255.255.0 192.168.0.41" on the 192.168.0.102 Gulf war

  "Route 192.168.4.0 ip 255.255.255.0 192.168.0.102 ' on the 192.168.0.41 Gulf war

  HTH >

• Addition of DIY SSD for iMac end 2013 now out of warranty

  Data sheet:

  • iMac (21.5 inch, at the end of 2013)
  • 2.9 GHz i5
  • 8GBs of RAM
  • 1 TB HARD DRIVE

  He is now out of warranty, so I think about adding an internal SSD flash drive. However, I did no workshop manual and have never looked inside. However, before making such a change, I would like to know if it is possible, how it will be difficult and if one SSD 2.5 "can be added or a PCIe SSD if there is a slot on the motherboard.

  If you have useful information, I would greatly appreciate your passing along.

  The end of 2013 21.5 "has only one SATA connector on the system board so your only choice is to replace the hard drive, cannot add a second internal drive. You can find several guides repair for your computer here https://www.ifixit.com/Device/iMac_Intel_21.5%22_EMC_2638

  If you decide to open your iMac and replace the HD you can consider upgrading your ram 16 GB as yours is the last 21.5 "with ram slots even if they are not user extensible https://eshop.macsales.com/item/Other%20World%20Computing/1600DDR3S16P/

• Rock KING how to ignore the outside frame of the license plate

  Hello. I'm doing an OCR program to detect the license plate numbers. However, I am having this problem where I specify the return on investment for OCR recognize my characters.

  Otherwise the program cannot read the characters correctly due to the presence of an outdoor setting on the image (probably OCR is read as a single character).

  Operations I can do to fix this?

  Photo 1: This is when the return on investment is not specified

  

  Photo 2: After the return on investment is selected manually

  

  Thank you.

  Hello

  In fact the answer to this question varies based on the other terms of your system. But first, I think you need to localize the position and angle of the plate.

  If we act with the image you shared, you can search the frame of the plate (shape of rectangle) using match game model/geometric model functions, while ignoring the characters inside. After that, you can set a benchmark using the position and angle of it. Then you can select your return on investment and make the system work.

  It's just a suggestion, look at the image above, you should find your way, given all the conditions.

• AVT Guppy 033 B device is the same image twice on the < Session Out > event: Frame made

  Sometimes the event gets the same image twice, but with an increase, correct the image of the index (see photo index 125, 126).

  We use a type AVT Guppy 033 B firewire camera to measure the distance between plants. The camera fires all 40mm the breakpoint of the NI7344 of motion control output.

  We work with the latest Labview and Vision version 8.6.1 could the firewire driver cause this problem. We use the original driver

  Microsoft XP, SP3. Should install us the driver of the TRA instead, other suggestions?

  Thanks for any help.

  

  

  Syn66,

  Looks like your code without taking into account the fact that the Images are passed by reference. It seems that you still spend the same image GetImage and then put it in your queue. Each iteration you will be overwrite the content of the image of the singular and all the elements in the queue is pointing to the same data of the image.

  If you want to structure your code like this, you'll probably want to create an image of each iteration of the loop, call GetImage use it and then put it in the queue. When you treat it and get out of the queue, you can then destroy it. You can optimize the image allocate/free sentence (which may or may not be meaningful) with a strategy of ping-pong by having a separate queue images empty and then you delete the images of this queue empty, GetImage to use and place it in your existing queue of images to process. After the treatment, instead of simply releasing them you would put them back in the empty queue.

  Hope this helps,
  Eric

• Impossible to route traffic through a tunnel "will" in a frame relay Center and spoke environment.

  Hello

  I have a network star frames environment.

  Headquarters (hub) and around seven remote branch offices.

  I'm trying to encrypt all data between the hub-and-spoke is borrowing point gre tunnels to point of the hub-spoke.

  I made the necessary set up on all routers and using SDM and all tunnels appeared.

  The problem when I tried to redirect all traffic to the respective subnet through the tunnel s assigned

  nothing is happen.

  I decided to do a bit of troubleshooting with a radius of one and test the connection to the hub.

  Ping from Headquarters to the tunnel endpoint

  Router01 #ping ppp.168.140.14

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to ppp.168.140.14, wait time is 2 seconds:

  .....

  Success rate is 0% (0/5)

  Ping of speaks to the tunnel endpoint

  router04 #ping ppp.168.140.4

  Send 5, echoes ICMP 100 bytes to ppp.168.140.4, wait time is 2 seconds:

  .....

  See nearby networking is learned by talking about following the eigrp process

  router04 #sh ip eigrp not

  Neighbors of the EIGRP intellectual property to process 10

  H address Interface Hold Uptime SRTT RTO Q Seq

  (s) (ms) NTC Num

  14 40 2280 0 2493678 2d21h Se0/0/0.1 0 10.x.x.1

  See nearby networking learned by Hub following the eigrp process

  H address Interface Hold Uptime SRTT RTO Q Seq

  (s) (ms) NTC Num

  8 ppp.168.160.16 Tu2 31 00:00:26 1 5000 1 0

  7 ppp.168.150.15 Tu1 13 00:00:47 1 5000 1 0

  3 ppp.168.170.17 Tu3 14 00:00:59 1 5000 1 0

  2 ppp.192.168.190.19 Tu4 13 00:01:05 1 5000 1 0

  0 ppp.168.140.14 Tu0 31 00:01:18 1 5000 1 0

  11 10.x.0.6 Se0/0/0.4 12 02:40:20 53 318 0 399684

  1 10.x.x.9 Se0/0/0.7 11 02:41:20 1380 5000 0 377427

  9 10.x.x.5 Se0/0/0.3 11 02:44:28 47 1426 0 370651

  4 10.x.x.7 Se0/0/0.5 12 51 306 0 363006 1d23h

  5 10.x.x.8 Se0/0/0.1 12 77 462 0 1210492 2d06h

  12 11 51 306 0 395295 2d21h Se0/0/0.8 10.x.x.11

  6 10.x.x.4 Se0/0/0.2 14 53 318 0 284379 2d21h

  Router01 #.

  I have a closed configurations of the hub and one of the RADIUS (the problem as outline above that happens for all the rays).

  There is also the pre-shared keys were Strip and IP set up for security reasons.

  Concerning

  Jomo

  Sure no problem.

  Have a good holiday.

• VMmark ends, but Score .out is empty

  Hello

  I'm working with VMmark for a few weeks, but I'm stuck.

  I'm still working on the first tile (tile0) and even if it works without steps failed (just a few caveats), the .out with the score of the tile file by saying only one line: the system cannot find the path specified. The same goes for the RMQmgr - out .txt file.

  I've done some checking:

  -RMQRabbit service is running

  -hosts file seems correct, ping worked at each machine.

  -Staf responds as expected (stac _machine_ ping ping)

  -Perl is the path

  -ssh to esxi servers works fine (without promting password)

  -client0 run outside the cluster

  I am aware that SvMotion is failing (I have just a single data store)

  Attached you will find the result directory, the hosts file and pings of staf.

  Can someone help me on this one please?

  Kind regards.

  Dario

  This generally indicates that you don't have enough storage accommodation of your VMs mail server.  Try to add more drives, changing the raid type to something more powerful, etc..  It will depend largely on how you have the program installed and tuned to your specific environment.

• HP DL380p G8 - packets ignored on the management port but not the virtual computer.

  I searched through discussions, but not found a request for my problem.

  We have added two new guest VM in the center of the customer data. Currently, they had 2 x DL380 of the G7 which worked perfectly for 2 years. We have added two new DL380p G8 and have some weird dropouts on the management ports. Currently using SAS-store data (no SAN or iSCSI)

  I have pre configured servers (2008 R2 on each single guest) before their move in the data center using ESXi 5.0.2 http://h18004.www1.hp.com/products/servers/software/vmware/esxi-image.html HP installation. Since we moved to the datacenter, however, the new servers to experience about 10% loss/fall of package to the management port IP, but 0 packet loss on the IP comments. It doesn't make a difference either if the management port and the vswitch are on separate NIC interfaces, same result when combined on the same network adapter.

  The Guest VM seem to work well and are not affected by the present, but any P2V we are trying to do currently fail due to loss of packets on the management port.

  Other host (DL380 G7) servers running the HP exsi distro 5.0.0 and don't suffer these questions.

  Any advice would be appreciated. I wanted going 5.1 because when I was configuring initially I wasn't aware that there was an application of conversion of VMware for him - it seems now exists, so if you think 5.1 is the answer, then I'm happy to go ahead and do it.

  I solved this problem, but thanks for all the help...

  Note for all the other people there. If you clone an esxi installation SD or USB or else save time, the MAC addresses of the server of origin met on the new server, regardless of the different physical MAC address.

  To resolve I had to run esxcfg-advcfg - s 1/Net/FollowHardwareMac on the server that had double MAC address list.  All the VMnic (4) in both servers had the same Mac as well just change the port not fix her. A new card would have solved my problem, but does not solve the problem.

  The problem was discovered running by displaying the ARP table.

• Now start (end) MM 2014 out SSD external; What should I do with the profile on my HHD?

  As indicated in the title, I copied my HARD whole on an external SSD drive which is running off the coast of USB 3.0. Things work terribly for months now, so I think I'm ready to wipe the HARD disk partition original that was made when initially, I set up my Mac Mini and recover about 300 GB of space which is just collecting dust. I'm just a little unsure as to how to best / safest this approach and could use some advice.

  • Should I simply delete the partition by using the disk utility? Who will mess up anything?
  • Should I leave a copy of Mac OS on that partition incase my SSD never goes down?
  • What happens to the settings of recovery if I wipe the HARD disk partition original?

  All advice is appreciated!

  Personally I backup the HARD drive and external SSD on another external drive and set it asside before doing anything.

  biggie101 wrote:

  • Who will mess up anything?

  1 depends on how you initially install and everything moves on the SSD...?

  1.a. If you have formatted and installed a clean OS X on the SSD, then used together Assistant to migrate everything on.

  (so yes, it might be safe to delete your data on the internal HARD disk and OS X)

  1.b. If you simply copied everything above the SSD.

  (while not, because both drives could be based on each other and sharing as Siamese)

  2. depending on how you answered 1... ?

  It would make a good backup for the SSD drive.
  

  3. it depends also how you answered 1... ?

  If you answered 1.a... then you should already have a recovery on the SSD Partition.

• IPSLA (test jitter, delay, Frame-Relay)

  Hey guys, test my network using IPSLA but its strange how when I connect to a router for the network and the entrance to the IPSLA orders it says it fails every time? Im a student doing my project btw and I'm not sure why its not to send across the network. I have connectivity and can test on the entire network. the commands I used were-

  12 IP sla monitor

  type the dest-ipaddr jig
  192.168.0.10 dest-port 5060

  frequency 300

  output

  IP sla monitor annex 12 start time now live forever

  then when I use the command of statistics to show the exit, he said didn't: S I'm missing a step somewhere, or do I have to announce the router on my network? Im very confused :/

  Could include the config for the receiver IP SLA, so if you have configured?

  Great read on the subject: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipsla/configuration/15-mt/sla-15-mt-book/sla_udp_jitter.html

• What are the OID (and MIB id) to track the QOS packets ignored queues?

  Hello

  In which MIB and OID is available on the platform to get/output qos 7600 dropped counters packages available on the interface of queues to see the?

  My configuration: 7609 S-RSP720-SRB3-DFC

  queues interface gi2/18 #sh | b fell
  Packages removed on the show:

  queue dropped [cos-map]
  ---------------------------------------------
  1                1  [0 1 ]
  2                0  [2 3 4 ]
  3                0  [6 7 ]
  4                0  [5 ]

  Packages removed upon receipt:

  queue dropped [cos-map]
  ---------------------------------------------
  1 1 [0 1 2 3 4 5 6 7]

  Thks in advance.

  Hi Patrice,

  Please try CISCO-SWITCH-QOS-EXT-MIB, but it requires less CBC.

  FTP://FTP.Cisco.com/pub/MIBs/v2/Cisco-switch-QoS-MIB.my

  HTH

  Laurent.

• Incoming packets were discarded on Dell 6248 switch

  Hello guys,.

  I'm having a problem on my network. From time to time the icmp echo packets are lost and this causes our monitoring system trigger false alarms.

  I checked interfaces for switches and found the discarded packet counter is incremented in one of them.

  Flow control is enabled on the interface and there is no frame break sent.

  The duplex on both ends are correct are the port speeds.
  The firmware of the switch is 3.3.9.1 and the model is a PowerConnect 6248 switch.

  view statistics ethernet 1/g48

  Total packets received (bytes)... 2019770477
  Packets received 64 bytes... 945800
  Packets received from 65 to 127 bytes. 1105872
  Packets received from 128 to 255 bytes... 152970
  Packets received 256-511 bytes... 445738
  Packets received 512-1023 bytes... 155436
  Packets received 1024-1518 bytes... 414040
  Packets received > 1518 bytes... 634118
  64 bytes of RX and TX packets... 946019
  RX and TX 65-127 bytes packet... 3294655
  Packet RX and TX 128 to 255 bytes... 235082
  RX and TX 256-511 byte packets... 893732
  RX and TX 512-1023 byte packets... 311408
  RX and TX 1024-1518 byte packets... 436671
  RX and TX 1519-2047 bytes packets... 873826
  RX and TX 2048-4095 bytes packets... 0
  RX and TX-9216 4096 bytes packets... 0

  Total packets received without errors... 3853974
  Unicast packets received... 3421088
  Received multicast packets... 211575
  Received broadcast packets... 221311
  -Other - or ITU (q)
  Receive packets ignored... 506

  Total packets received with errors of MAC... 0
  Jabbers received... 0
  Fragments / sousdimensionnés has received... 0
  Alignment defects... 0
  FCS Errors..................................... 0
  Overruns....................................... 0
  802. 3 x Pause frames received... 0
  Unacceptable frame type... 0

  Total of transmitted packets (bytes)... 858789293
  64 byte packets transmitted... 219
  65-127 bytes transmitted packets... 2188783
  Packets transmitted 128 to 255 bytes... 82112
  256-511 bytes transmitted packets... 447994
  512-1023 bytes transmitted packets... 155972
  1024-1518 bytes transmitted packets... 22631
  Transmitted packets > 1518 bytes... 239708
  Size of the image of max... 1518

  Total packets transmitted successfully... 3137419
  Transmitted unicast packets... 3034928
  -Other - or ITU (q)
  Multicast packets transmitted. 1628
  Broadcast packets transmitted. 100863
  Transmit packets ignored... 0

  Total transmit packets ignored... 0
  Single Collision frames... 0
  Several images of Collision... 0
  Excessive Collision management... 0

  802. 3 x Pause frames transmitted... 0
  GVRP PDU received... 0
  GVRP PDUs of transmitted... 0
  GVRP failure records... 0
  BPDU: 0 sent, received 0

  EAPOL frames transmitted... 0
  EAPOL Start received frames... 0

  Thanks in advance.

  Humm,

  We have changed our duo of remote of a failure wan link and the interface mistakes of count stop. Everything is the same: traffic, applications, etc. Not a clue about what happened because there is a Linux between the equipment of the carrier and the switch (bad packets would have fallen in the interface of linux machine).

  We turn now to the carrier of the explanations/solutions.

  Thank you for your time!

• Audio skips out of sync in several places when the export of the first pro

  I have a short, 15 minute, turned to 23.976 FPS.  When I export to load in yet somehow audio jumps not synchronized to several different places.  The weird part is that in all cases there are 2 people in the scene and that a single audio out of sync breaks people.

  I went through all the audio files in the sequence in Premiere Pro (CC) and the audio fits perfectly even though I play in first.

  I checked and double checked settings FPS in first and still, as well as other parameters such as the video and audio format audio sample rate, etc., and everything is consistent.

  I'm exported from Premiere pro using the "Multimédia" option and choose MPEG2-DVD, NTSC, 720 x 480, progressive quality of 23.976 FPS, 100, CBR, target 9.00Mbps, with audio PCM, 48 Khz, stereo, 16-bit output.

  Source sequence is 1920 x 1080 (1.0), 23.976 FPS, progressive, 48000 Hz, stereo.

  I also used Media Encoder on the same sequence to create an MP4 file and that seems to come out perfectly synchronized throughout.   So, I'll try using media encoder to create a .iso file, if possible.

  I'm new to this, all the words of wisdom or of things to check would be greatly appreciated.  Thanks, Bobw

  Voice out of sync with the lips.  I look for "bilabials" (P, B and M) in the speech, then make sure that the sound correctly synchronizes with the lips.

  I guess we can do exactly the same with notes on an instrument if it was of expert musicians.

  In any case, I turn on the "show time audio units" and then carefully align the appropriate sound with the position of the pack language appropriate lip. Often it's 'zoom' on the frame and audio tracks and the cleaning back and forth several times.

  OK, but let's go back to my problem.  That, it turns off does not exist.  I treat so badly that I had to remove the camera and audio sound recorder and sometimes contract between the two during a audio jack.

  AND, I actually had audio out of sync by about 3 images in three different places in my sequence, in one place.   And Yes, I looked at dozens of times and convinced myself that it couldn't be my work because I had "checked" so many times.

  This was caused by a drawing of lots of last minute "tweaking" and "assume" that the settings I made did not affect the video tracks & audio following.  (HINT: it is almost always if you don't take extreme care and seems sometimes even when you do.)

  AND I also had a "nested" sequence I had absolute fits for audio, synchronize perfectly on.

  BECAUSE...   I had 'nested' video but I have NO audio with her nest.

  .... The "Lesson Learned" here is: "If your export ends with audio out of sync quit"guess"that it is impossible because of your Premiere Pro sequence is wacked"

• Receive packets dropped on all the 4 vmnic

  ESXi 5.1, three hosts, 31 VMs all the hardware version 9 with the updated tools

  In the performance tab, I show the data network in real time with only "reception of packets dropped" checked

  My host and all 4 of the vmnic present ignored packets

  What is strange, is the graph is a line flat for the host and all the 4 vmnic, for example for the host, it's a constant ignored packets 42 130

  Two of the vmnic are attached to a Vswitch which are supported by two 1 GB Cisco switches in the back of my IBM Bladecenter

  Two of the vmnic are attached to a DVSwitch which is supported by two IBM 10 GB switches at the back of my IBM Bladecenter

  This is an instant screen that shows this. Although this screenshot shows a host, three guests are experiencing the same thing

  No idea why this is happening?

  

  The type of this metric is "summons". This means that the value represented is always the sum total of all the matches have taken place so far (so all packets ignored til now). You've probably had a number of frames being dropped in the past, but not now, which will result in a flat line for this particular counter.

  Check (r) esxtop for detailed and statistics.