Ending a course/lesson does not

I have prepared a lesson and it works perfectly when I saw the project as a pdf. On the last slide, I have an exit button and have implemented everything that I believe needs to be put in place to complete the course when this button is clicked.

Then I published in HTML5 and transferred to my LMS - and everything works except the exit function!

Leave the button on the player to captivate does not work either.

I must have missed something somewhere - but as a new user, I don't know what I've missed.

All advice is appreciated. I use 9 Captivate.

Thank you

Generally, you are either launch the content in a separate window, in which case the user closes just this window using the kill the browser button in the upper right.

But if the content inside some sort of SCORM player where there are several lessons and a table of contents that the LMS provides then launch your learner might just be selecting the lesson well or next to the table of contents by clicking another button/link which is theirs on-screen LMS, hence they have initially open the course.

Anyway, the point is that the Exit button is usually only goes to work reliably in some circumstances, and given that these circumstances are often beyond your control, I find that he is not better because it is there.  LMS most provide better ways to navigate a course between modules.

Tags: Adobe Captivate

Similar Questions

  • TPServer 8710 - Custom conference ending the notification text does not

    Hi all

    in our network, we have 8710 TPServer and etc.

    the "Conference of custom ending the notification text" does not work

    What do you advise?

    tkanks a lot.

    Hi Onur,

    We have therefore 3 numbers

    Conference custom ending the text of the notification, notification of CTS - Man 10 minutes and 2 minutes of GST.

    This should be no Rendevouz for meetings,

    -What version of CTSMAN?

    -Do you see the BBFRR in CTS?

    -See you BBFRR in C20?

    -Do you think the meeting scheduled in CTS - Man?

    -When in the conference can you send a normal text to CTS?

    For one of the question:

    Use of conference custom ending the notification text

    Ending Conference custom notification text

    End notification text Customer conference

    If you check the help:

    Use custom Conference end notification text allows the telepresence server to use a personalized message to warn participants that the Conference ends.

    The telepresence Server uses a message by default unless you check and write a personalized message. The default message is that this conference is about to end.

    Does not apply to the Cisco CTS endpoints.  See the reference endpoint interoperability for more details

    -Gonzalo

  • Coursera site does not

    Firefox (version 34.0) constantly displays "Loading"... "and an 8 horizontal when I try to access www.coursera.org. It worked very well - the problem must have started in the last 6 weeks or more. I already tried in 'safe mode' and the problem persisted. He has also persisted after clearing the cache and delete cookies. My Internet Explorer has access to Coursera without any problem.

    Furthermore, the button "Question" on the support page also does not work in Firefox - I'm typing this in Internet Explorer.

    You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of a history entry ("" history > view history "or" view > sidebar > History "") or via the subject: permissions page.

    Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from that domain you don't want to lose then check that back up these data or make a comment.

    You can't recover from this "forget" unless you have a backup of the files involved.

    It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

    Create a new profile as a test to see if your profile is the source of the problem.

    See "create a profile":

    If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • Toshiba LX830 - END/PRTSC Screen Capture does not work

    Hello

    I use a Toshiba LX830 with Windows 8.1.

    The END/PRTSC button on the keyboard does not work, it is the same key on the on-screen keyboard. I'm trying to take screenshots. Various combinations have been tried for example ALT + END/PRTSC, FN + END/PRTSC, FN, CTRL + END/IMPR.

    Nothing is entered for paste in Paint.

    Any help would be appreciated. TIA

    I found the answer: Windows + Fn + PRTSCN

  • BSOD: "a process or thread crucial to system operation has unexpectedly released or ended." Startup Repair does not solve the problem-

    I recently had a serious viral infection on my laptop Windows Vista SP2 Gateway.  After you run the antivirus AVG cleaner, who seemed to have had to quarantine or delete some files infected, System I couldn't Boot Windows to the top on this machine - even in the (all flavors of) Safe Mode.  When you try to start, I'd get

    a Blue Screen of Death with the msg of error in the title of this thread.  Before turning off the crash dump, the system indicated:

    ' * STOP: 0X000000F4 (0 X 00000003 0X85F22848 0X85F22694 0X82A26AB0).

    Other messages in the BSOD said I might have new HW causing the BSOD (I did not - but nevertheless I removed all external HW and tried again - got the same result).

    So one of the first things I did was to capture the startup log, so I could see what the pilots were hang up / does not.  Here's what I found:

    (1) the last driver to load (as indicated in ntbtlog.txt) was monitor.sys.  My understanding is that this indicates that when this driver loaded, the system crashed at this place - suggesting that there is 'something wrong' with this particular driver.  However, it seems likely, that I can use the screen/monitor (built-in) to the laptop without problem.

    (2) several drivers do NOT load: they are:

    1 NDProxy.sys

    2 Kvhfjgcv.sys

    3 Kbdhid.sys

    4 i8042prt.sys

    QUESTION 1: "Monitor.sys" being the last driver to load, should I assume this is the driver the system hung up on (that is, which caused the BSOD)?  And if so, that means I should replace this driver?  If so, how do I do that (how and where can I get a copy of 'Clean/good' of monitor.sys)?

    QUESTION 2: Is it possible to get "good versions" of drivers I listed above which was NOT loaded (I guess they didn't not load because they have been corrupted by the virus or the virus cleaner, or maybe just deleted by the virus cleaner because they were infected) to put into the Windows\System32\Drivers folder?  How?

    Here are the steps I took to try to fix the "corrupt system".  I inserted my Windows Vista DVD into the DVD drive and loaded Windows using that.

    Once that came, I then tried the following (and here are the results for all that I tried):

    (1) I selected the option "Repair", then choose "Microsoft Windows Vista" OS and press "next".  He tried to 'attempt to repair' for 15 minutes about, then finally stopped with a message: "Startup Repair cannot repair this computer automatically.  "Details of problem indicated: (a) the problem event name: StartupRepairV2." Signature 01: ExternalMedia; Signature 02: 6.0.6000.16386.6.0.6001.18000; Signed 03:6; Signature 04:131074. Signature 05: 0xF4; Signature 06: 0xF4; Signature 07:0; Signature 08:2; Signature 09: WrpRepair; Signature 10:5; OS version: 6.0.60090.2.0.0.256.1

    (2) I selected the option 'display diagnostic and repair details '.  He said that all tests successful (error code = 0 x 0), and

    then indicated the 'cause': ' unknown error checking: bugcheck f4, parameters = 0x3, 0x88607b80, 0x88607ccc, 0x82a78ab0. "

    - AND -

    Repair action: repair and checking the integrity of system files.  Result: failed.  Error code = 0 x 5

    (3) I checked that the restoration of the system, and even though I know I had some Restore Points created at the origin of this system, System Restore has indicated that there was no restore points to go back, (leading me to believe that the virus must have killed)

    (4) so I chose the selection "Command Prompt", which opens by default "X:\Sources >".  I'm in C: and then typed: "sfc/scannow".  The system has responded with the following messages:

    "Start system analysis.  This process will take time. " follow up 30 seconds later by the message:

    "Windows resource protection could not perform the requested operation".

    MAIN QUESTION: any reflection on what other tools and options I try to repair the windows installation / driver set?

    Hello

    I suggest you follow the steps below:

    Method 1:

    Follow the steps in the link and check if the problem persists:

    http://support.Microsoft.com/kb/958233

    Method 2:

    Connect over winre and rename the driver files that he talked with *.old quick order. You can find these % system32%. Follow these steps:

    a. use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).

    b. in WinRE, open a command prompt. To do this, follow these steps:

    On the screen to install Windows, select the appropriate language to install, time and

    currency format and keyboard or input method options and then click Next.

    c. click on repair your computer.

    d. click 7 installation you want to repair, and then click Next.

    e. click on command prompt.

    f. navigate to % system32% and rename old files 8.

    Method 3:

    After step above the computer restarts. Run the System File Checker tool to troubleshoot missing or corrupted system files. Follow the steps from the link:

    http://support.Microsoft.com/kb/929833

  • End of chapter action does not not as advertised

    In the scenario, I created two chapter points and wanted to see the menu displayed at the end of each chapter.  The current approach of end shows the last Menu.  Yet when it is burned, the BD just continues to go to the next chapter after chapter is finished.

    What I've done wrong?

    Thank you!

    It is not clear that you have applied the "last menu" to apply it to each chapter. Link a button to each chapter. Does it work?

  • High-end non apple headphones does not properly with iPhone7

    I just bought the new iPhone 7 and discovered that my ear Bowers & Wilkins do not seem to be compatible with my new phone.  The sound works fine but the microphone and stop working after a pause control more then a few minutes.  I thought it was a question of headphones, so I have replaced, but still the same issue.  So for example I connect my headset into the adapter (supplied by apple), launch my music application, press play on the phone and the sounds of beautiful high definition comes out.  I can then press pause on the microphone control, press a second time to play and it works fine as do volume adjusters.  However, if I press pause and wait a few minutes, the remote control on the speaker cable does nothing.  The sound still works if I hit 'play' and 'pause' on the screen.  As soon as I unplug the headphone jack and plug back in, the remote works again, until I pause for a longer period.  It seems to stop responding when asleep screen and pause mode.  I disabled the screen lock to see what is happening.  Now pause mode for more than five minutes, the remote works but the screen stays on!  If at this stage, I turned off the screen (paused).  Two minutes later, distance mic and controls do not work.  So certainly associated with iPhone screen go to sleep.  Does anyone else have this problem or the solution.  This problem will not occur on the iPhone from my friend 6.

    Apple is aware of an issue affecting the controls on the headphones by the port of lightning and working on a fix.

  • Contact ID at end than guided access does not work

    It worked properly for me once, now it doesn't work at all. Thank you for your help.

    Of the use of the access guided with iPhone, iPad and iPod touch - Apple Support:

    End a session guided access

    If you use Touch ID on your iOS device, you can use it to put an end to a session of guided access. First, go to settings > general > accessibility > guided access > password settings and turn on a contact ID. Now, when you use a guided access, you can end the session as follows:

    1. Press the Home button once.
    2. Use the contact IDS.

    If you do not Touch ID on your device, follow these steps to finish a session guided access:

    1. Triple-click the Home button.
    2. Enter the guided access password.

    TT2

  • Firefox 3.5.1 running Vista has stopped working. No error message. Tried to uninstall and install also the latest version and get a message saying that I must first close Firefox (which of course obviously does not work)

    Firefox 3.5.1 running Vista stopped work, no error message. Tried to uninstall and install the updated version. Download the message that I first need to close Firefox, but it is not obviously executed.

    This has happened

    Don't know how many times

    I restored my system to an earlier date, December 2009

    User Agent

    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; Dealio Toolbar 3.1.1; .NET CLR 3.5.30729; .NET CLR 3.0.30618; NET4.0C; AskTbWCL/5.8.0.12304)

    Firefox can not run visibly, but is probably running in the background. It is in the Task Manager. To access the Task Manager go to Start and type in taskmgrsearch field. This will open the process task manager. Then go to the tab processes and end firefox.exe. After the end of this process, close the Task Manager and try to re-run the installation/uninstallation.

  • Microsoft Flight PC game - end of Mission field does not.

    Enjoying my PC free download game titled Microsoft Flight.  Problem: The field "End of Mission" on my screen is not highlighted, and I can't click on it to complete the game.  I have to CTRL/Esc to exit the game.  I would like to have the active domain of the "end of Mission".  Help, please.  THX.

    Hello

    The question you posted is related to the Control of Microsoft , and I suggest you to contact support for assistance at:

    Support:

    https://News.microsoftflight.com/blogs/News/Archive/2012/04/30/how-to-get-support.aspx

    https://microsoftflight.com/en-us/support/

  • < model: header > < end: model > in rtf does not

    I am trying to print values of columns between model header. It is not displayed in the output

    <? model: header? >
    <? end model? >

    Please help me...

    Did you include the call to the header? something like:

    Can you send me the xml file and the model of [email protected]? I can take a look.

    Thank you
    Bipuser

  • After updating Firefox, most of my search engine options have changed, the United States, the United Kingdom and I am unable to get the USA those back. Of course, Google does not change.

    After updating Firefox, most of my available search engines top right changed the United States to the UK (except Google I'd rather not use) versions. I'm unable to retrieve Yahoo USA or Amazon or Ebay search engines.

    The sounds that you got the version of Firefox GB with the update.

    You can download en version and uninstall the current version of en - us and install the US version.

    Download a new copy of Firefox and save the file to the desktop.

    Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will also lose your personal data such as bookmarks and passwords from other versions of Firefox profiles.

    Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • End-user license agreement does not display

    I have a MAC, I used adobe for ever, when I updated, I cannot accept the end-user agreement. that the screen never shows up. When I try to force it on another screen, it is said that I need to sign the agreement of the end user. the load down, when he goes to the finish 3 screen 3 inches, he goes to the other products you can screen. HOW do you get to the end user agreement screen? Help, please.

    With the closed drive, open your Applications folder, double-click the icon of the drive and accept the agreement.

  • end program device10 does not, as he tried to stop

    As he tried to stop, end program Device10 responds does not appear on the screen. I can select end now or cancel. I select end now and end program hpqste08.exe hits the screen and again I select end now or cancel. This issue just started and I can't understand what this means.

    Hi Robert,.

    1. do you have an HP printer that is installed on the system?

    2 did you a recent software or hardware changes to the system?

    HpqSTE08.exe is installed and used on computers with HP printers. This program is a driver that allows communication between your computer and your printer.

    Method 1:

    If you use an HP printer, then you can uninstall and reinstall the printer and check.

    See also the following articles:

    How to install a printer driver locally for a remote printer in Windows XP

    Resources for the resolution of the printer in Windows XP problems

    Method 2:

    If you still experience the problem, you can put your boot system that helps us determine whether third-party applications or startup items are causing the problem.

    If Yes, then you may need to contact the manufacturer of the program for updates or uninstall and reinstall the program.

    You can read the following article to complete the clean boot.

    How to configure Windows XP to start in a "clean boot" State

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in the article above to configure Windows to use a Normal startup state

  • Scrolling of the ListView in the end does not work

    Hi, when creating completed page, I add items to listview and scrolltoposition (end, smooth) but it does not work. How can I auto-scroll down entering the page?

    It's almost a year, but it was the first match in google for my problem.

    I solved it by changing the orientation of my layout of the ListView and the sort order of my model.

    ListView {
        layout: StackListLayout {
            orientation: LayoutOrientation.BottomToTop
        }
    }
    

Maybe you are looking for

  • Error message that I am not connected to the internet on some app

    Some of my programs will not update (automatic or manual) when I am online. Quicken, RoboForm, CCLeaner will be updated without problem. I was not able to install SP2, as well as updates of .NET Framework on my PC (XP Pro have). Suite of McAfee or No

  • Pavilion P7-1235: internal second hard drive HP Pavilion P7-1235

    Hello!  Is my HP Pavilion P7-1235 set-up to accept a 2nd internal hard drive?  If so, is there something special, I'm going to have to add the disc? Comments and help will be appreicated. Thank you Patrick

  • To try to correct the noise "bammp".

    I have a laptop Dell XPSL502X Windows 7 64-bit operating system. I had this noise coming from the speakers for almost 2 months. The support people at Dell tech ran the updated driver, but I still have the problem. The noise comes intermittently when

  • CD burner will play CDs but not burn correctly

    I have Dell inspiron 1720 I bought 1 year ago (just in time for the guarantee at the end) and the CD/DVD writer will play media correctly, but when I try to burn CDs of any type they will not play in any stereo at all. When the problem started they w

  • Bootstrap responsive.css necessary or unnecessary?

    HelloAccording to GetBootstrap.com, (http://getbootstrap.com/2.3.2/scaffolding.html) to make a sensitive project, you must add another .css file, bootstrap - responsive.css.  But I've seen many models that do not have this .css file associated with t