Energy distribution

I would like to list all the alternatives to put several accessories, directly from the camera.

Right now I'm trying to find a way to put the mount Prolock Optitek and the RedRock Micro Focus from the exit of the AXS - R5 wireless, is it possible to use a cable to Hirose Y Split? Or do I need to use a power distribution box?

I like this one,

http://www.HawkWoods.com/products/details/details.php?code=VL-Ca6&mainMenuItemToSlide=1&ASI=PC-3&ASI...

but I would like to find another smaller.

Plase share your solutions for the distribution of power with the F5/F55

Smaller that I've seen is Scatterbox solid camera:

$595

Tags: Large Sensor Cameras

Similar Questions

  • Orbi router and satellites for a condominium of 40 units

    I am considering Orbi router and satellites for a condominium of 40 units.

    What are the limits on the number of satellites, and how the energy distribution (which carries the signal from the router to the satellite) on the signal, since it needs to go through a panel of circuit breaker between the router and each satellite?

    I guess all tests (so far) be on the side of the user to a single panel. In the case of joint ownership, each distribution panel is a subgroup of experts of the main breaker box.

    Hello JimLudden

    From what I gather from your question, you think Orbi is a power Extender line? Orbi does not work it on the power line, you can watch these Ko to get a better understanding of what can make the device.

    http://KB.NETGEAR.com/app/answers/detail/A_ID/31031?CID=wmt_netgear_organic

    http://www.downloads.NETGEAR.com/files/GDC/RBK50/RBK50_QSG_EN.PDF?CID=wmt_netgear_organic

    DarrenM

  • HA problem datastore heart rate after a cluster

    I have a case with small cluster of 2 hosts and e. These had to be stopped because maintenance work which has caused (planned) power ~ 6hrs blackout in energy distribution. After the blackout came everything normally and system works except that VMWare complained error "number of vSphere HA heartbeat for this host data warehouses is 0, which is less than required: 2. There are 5 shared data stores. I tried to turn HA and back again, but the error persists. Settings HA if I try to select a preferred data warehouses I get an empty list.

    Tried searching for an answer, but came above all how to disable this message, which is what I don't want.

    For some reason any HA does not see the shared data warehouses. Data warehouses can be found on the two hosts? If Yes, with exactly the same name?

  • Flat frequency response

    I probably wouldn't ask this question because I charge people for my amateur obviously recording capabilities but it's one I've ever had explained to me and I need to know the answer to one...

    I would like to settle the matter in this way:

    When you get in the car and pop in a cd of product professionly, most of the people get the control treble for 6-10 (on a scale of 10) and bass (4-10) upwards according to the factory speakers and the type of material and whether or not they care what their music sounds like. When you get home and you listen much finer stereo home always to listen to professionally produced album, always reach you for these high and low buttons and crank them several notches or if you have a graphic equalizer twist you on a smiling face .

    There is so much importance in the world of recording to get out of your room with shock absorbers flat frequency response and bass intercepts and spread around the reflections with deflectors, etc etc... etc., we spend thousands of dollars on such things and some measurement software to make sure that it is flat. Then we use this flat response to produce music that sounds good and waiting for the translation of these cd players and home stereo systems.

    (I will additonally Preface my question by saying that I had no problems to make my music to translate my home studio to any other system of reading, but I'm a little confused as to what is happening.)

    Now finally my question (s), when we reach for these buttons high and low on our car and home reading systems, are we really just try to compensate for the lack of bass and top of the range in these systems so that we can get a flat frequency response and too make the music sound good on any system?     or

    Do we as listeners prefer the face smiley in music frequency response and are we take a cd that has a flat frequency response and make a smiley face out of it to make it sound to our ears? (Please don't give me an answer for material/gender.)

    The reason why I ask is because I have to put a graphic equalizer on my monitors 2031A truth to make professional stuff sound good thanks to them and then I Mix round my music for the same material/any sound of course. (I'm not really interested in any monitor bashers or I would already put this on to Gearslutz.)

    Even once be reformulated... The masses think that music sounds good when you have a flat frequency response or the smiling face and if the these States among young people, how are supposed to realize that when the facility from our home studio produces a flat frequency response, do give us our EQS instructors like me?

    Additonaly, I understand that when talking about frequency response flat in the rooms, that we are not talking about launch thanks to a system sine waves and the going of their frequencies, measure so them we can detect everything on the focus/deficiencies in the room then maybe this question is a little more to the tuning monitor.

    If you are looking for Fletcher and Munson in Google, you could start to do a little the beginning of any idea why this is not quite as simple as it seems... and I'm not sure I can give you a complete answer, although I peut give you a few things connected but somewhat randomly, to meditate wearing my acoustician Hat:

    The fundamental problem is that, when things are quieter (and less distorted, by the way) our ears get more sensitive to frequencies medium, and if we listen to music like that, it always sounds as if the bass and treble are unbalanced. In cars, it is slightly different though; the frequency response of everything that is there generally tends to be anything but flat - and often too emphasizes the middle range anyway. Treble tends to be absorbed very easily in padded cars, and because most car speakers got nothing as acceptable to the tweeters in order in General, it is not surprising that people want to increase the treble. As for the bass - well I am still lower that personally, but I know what you mean in principle!

    If by a "commercial" CD, you mean the one where the voice is important, so yes I can easily imagine why you could as naturally want to increase the response to the extreme - that makes sense, if you think about it. The mid-range voice is prominent and probably compressed, so its average level is stronger support - helps it stand out. But also it distorts the overall time response - support can be balanced so it's not serious in itself, but which does not always if you have the wrong applied voice settings, or at the very least, applied said. And some voices are much worse; for example Sealion dying (AKA Celine Dion) makes the most appalling racket in the middle range, and you should certainly less of it!

    So, really, I would say that it is not a question of bass/treble, but a mid-range one. If you look at commercial CD in general, you tend to find that the energy distribution is pretty even on the entire audio band, which means it comes off at 6 dB/octave, if you look in hearing (it is something energy/Hz), but in reality most of the CD these days are here mixed a little brighter than that - more like a - 3 dB/octave descendant of about 1 kHz , and it is partly to make up for a lot of things - some of which are cars... You have to watch out for the problem of good distortion - most people don't realize, but you are able to tolerate rather high undistorted sound anything with levels of serious distortion in it, and if this distortion is in the middle range, then you will like it more quiet even when. Then under-run decent, over-rated sound systems always sound more clean and strong but you should beware - they can damage your ears just as much, if not more.

    Car interiors they increase the chances of the mid-range boost that occur?  I think it's a pretty safe bet they do, in General, simply due to the size and the acute problem, I've already mentioned. And if you try to compensate for too much mid range, then the rest follows. More home replay systems these days seem to be heavy mid-range for me as well - I heard something cheap recently which was something as a flat - response and they really agrees that they are in both chambers.

    If you want to listen to material as it really should be, then you need to experience it live first, and then I would say do a direct comparison with what you hear in your monitors. I'm lucky - I can do fairly regularly with a variety of materials. I tend to leave things like dish, as they are saved? Well, it depends on what it is. If it is somehow classical, then sometimes I watch carefully the low balance, but generally, I leave the rest alone. The rest of our days I just get its good - and this can mean all sorts of settings, depending on all sorts of things. More and more, I came to the conclusion that medium too is not necessarily a good thing – but it's mainly because of the general lack of good material around these days.

    Regarding the monitors and flatness - well it is not really a problem for most people, compared with obtaining their correct listening environment. If you have a pair of cheap monitors in a good room, chances are the results will sound better than a cheap pair in a room uncorrected - despite what all fans of monitor on gearslutz might say. Nowadays, even the least expensive may seem quite respectable. But the flatness is not really a problem with the monitors - a decent impulse response and low distortion are much more important. Chances are that if a manufacturer got that right, the monitor will be properly 'revelation' anyway - which is what a monitor is supposed to do.

    The only thing you do not do however, is QE the stream of your monitors - that went out of fashion, as soon as he came in--fortunately. You can set the room so that it is the most truthful. If you EQ the battery monitor, it will inevitably be only its good in one place in the room, and it's no use to man nor beast. Things only decent that can do real room correction systems is to equalize the immediate response of time to account for what is actually between you and monitors which if done properly can improve an image without end stereo.

    If the answers? Well not really. But at least I explained a bit (but not all) of the questions.

  • Safari with significant energy on El Capitan

    I just did a thorough cleaning and a reinstallation of El Capital, yet Safari still uses an important energy. Here are the details:

    With a full battery after reinstalling, got about 13 hours of life expectancy while Safari has also been opened with a tab. Not even 30 minutes later, this substantially reduced to 7 and then 9, without me open more applications or tabs or install anything. I also disabled all plugins and have some extensions on Safari, but in the battery menu, it says that Safari uses significant energy. There was no change of brightness of the screen etc - in fact I have actually reduced it yet. Initially, I put iCloud to synchronize certain things, including Safari, but since then, I have disabled the synchronization without change. In addition, it is a battery completely NEW, I just reinstalled from Apple, so I would keep it going as long as I can. I have attached a picture of the activity monitor because it shows nothing unusually high in there. Please help me understand what in Safari is the cause of significant consumption.

    Energy consumption depends on the activity open in Safari, a single Web site consumes more energy than the other. You should avoid using plugins if you want to extend your battery life. Battery remaining calculated time is just an indication based on current electricity demand.

  • How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

    i mac OSX10-9-5 2015.   How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

    To the best of my knowledge iTunes has all of the features that could stop him. What make you believe it's iTunes rather than some other power saving feature? What happens exactly 30 minutes? It's happens during playback video or audio?

    TT2

  • What is the best Linux distribution to work with Firefox (or Thunderbird)?

    With the advent of Win8 & Win10, I am considering (re) installation of Linux. I stopped using it because I was not getting timely Firefox and Thunderbird updates. I rely on Thunderbird calendar & Tbird interface.
    So what is the Linux distribution to be more likely to be kept up to date?
    Thank you
    paladin_3

    Regular distributions Linux versions may be supported for a few years more or less Long term releases of the same or other Linux distributions support there.

    The drawback with the LTS (like Ubuntu with some versions) versions, is that they tend to use older packages more stable vs using the most current set.

    Older versions LTS which are always supported by distribution may not meet required minimums to use the current version of Firefox for example.

    https://www.Mozilla.org/en-us/Firefox/41.0/system-requirements/

    The current currency out June 30, 2025 is supported until April 2019, so there are options.

    openSUSE is a community which tries to keep some older versions updated when openSUSE drops in support.

    https://en.openSUSE.org/lifetime
    https://en.openSUSE.org/openSUSE:Evergreen

    Linux for Firefox 41.0 requirements are the same for Firefox 17.0. However, a big change in a while is GTK 3.4 or newer will be the new requirement, probably to start Firefox 43.0 communicated that he was going to be Fx 42.0 release.

  • Why can't access, save and print a PDF file from the site of EDF energy? Other work.

    EDF is my energy supplier and I use "Paperless billing" with PDF files for access, save and print my invoices in Acrobat Reader ms. I cannot do it in Firefox, but can do with all the other Web sites. I use I.E. 11 to access invoices EDF. Y at - it a Plugin/work around that I don't know it please? Thanks for your time.

    Hello jscher and thank you again for your continued support.
    I found the cause of my problem to the installation of the new Adobe Reader DC.
    The new Reader immediately now all PDF files new downloads to libraries > downloads. Previously, (under Adobe Reader XI and previous versions), this process had to be physically carried out. I rarely visit the source of downloads, so missed.
    CD player is now a very complex program and I need to explore further. Thank you for your advice and I apologize for what amounts to a waste of your time.

  • With assistance from 31.1.0, on Mac & distribution lists sending the server responds ' address of NW-Member < "chorfa watch' > invalid because no e-mail form user@host. »

    I upgraded to Thunderbird 31.1.0 yesterday. I have not modified the distribution list in the last few weeks. This is the first time I used the distribution since the upgrade list. I never got an error message from the mail server who oppose my distribution list. The distribution list has thirty three 33 addresses. The last time I sent by email using the distribution list has been 28/08/14. Text of the alert message 'Invalid recipient address' is ' < ' chorfa watch"> NW-members is not a valid e-mail address because it is not of the form user@host.» You need to fix it before you send the e-mail. »

    (I've edited the details of the issue and moved the thread to Thunderbird - c)

    I'm glad to hear that your problem has been resolved. I noticed that you have chosen your own answer as the solution, you can select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

    I also have new information on this subject.

    It looks like this bug. If you have a Bugzilla account, it would be useful to vote for this issue.

    It seems that lists with a description that includes several words have this problem. The bug report suggests to replace whites "" between the words in the descriptions of these lists with an underscore "_".

    If you don't want to change your descriptions, the other workaround provided still works.

  • energy consumption of iMac

    What is the power consumption of my 27 iMac late 2009 model, while in mode 'sleep'?

    Energy consumption and thermal information for iMac - Apple Support

  • Energy saver settings missing from the Profile Manager

    I'm under Server.app 5.1 on a MacPro El Capitan (10.11.4) running. I am trying to create a fake profile in the Profile Manager to distribute to my class to illustrate patterns of school boards and want to create one for the energy-saving settings. Unfortunately, this option is missing! Where would it be? That's all I see for the operating system parameters:

    Elementary my dear Watson!

    • Ensure that you have a group of devices for the appropriate devices, whether it is portable Mac or iOS devices.

    • Register at least a device in this group

    • And continue to change the settings for this group
    • You will find savings on OS X to change

    • The same would be the procedure for iOS payload found in the part of the iOS.

    Hope that helps

    Leo

  • Distribution-double processor MacPro 4,1 of RAM Board

    Hello world.

    I currently have a tray of uniprocessor MacPro 5.1 with 32 GB of RAM (4 x 8 GB) - 3.46 GHz six core (I replaced the 2.8 GHz processor it initially comes with).

    I recently bought a MacPro 4,1 dual processor tray with 32 GB of RAM (8 x 4 GB) - dual 2.26 GHz quadruple-heart, with whom I intend to replace the tray uniprocessor (after I have updated the firmware of 5.1 and swap on processors with two 3.46 GHz).

    I intend to move my original 32 GB of RAM to the new status bar and use of the 16 GB of RAM of the double set. Is there a better/correct set of distribution of RAM; 24 on a single series and 24 GB on the other (for example a 8 GB, slots slots two 4 GB, slot machines three 8 GB, slots four 4 GB), or is it possible to place the RAM everything?

    I just hope that the RAM on the Board of two processors are 1333 MHz DDR3 ECC, as what I currently have.

    Thanks in advance for any help!

    To install memory see:

    Mac Pro (mid-2012 or earlier version): how to remove or install memory - Apple Support

    The MP 2009 (4.1) came with memory 1066 MHz. up to date firmware than a 5.1 allows you to run the memory at 1333 MHz 1333 MHz memory is installed.

    Sometimes mixture frequently memory causes problems. I think if you install only memory 1066, that it will take place in 1066.

  • energy consumption of iMacs

    Why put you a power 310w supply when at full load can take up to 360W? and who knows how many with lots of memory and i7 upgrades.

    They need at least 400W.

    It's really bad and it reduces the overall performance.

    Of course, the loss is thermal too but who cares for that when pay us that much for a so-called high-end machine...

    I do not understand you Dear Apple...

    Also why not to provide information about energy consumption when is right to the wall outlet? Do you know that it is not zero?

    And he plays 0.7W 2W to an iMac but 14.2 and other models is almost the same...

    Besides on temperature problems...

    and I have 2 iMacs comes only from your amazing operating system.

    I'd rather have an answer of an Apple certified technician.

    Thank you.

    This is a user to user forum. If you want to send Apple your concerns...

    http://www.Apple.com/feedback/

  • I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list.

    I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list. MBP OS 10.11.4

    Open the "sent" folder on the account that you mailed to and look at the message that you sent it to see.

    You have email of the accident to a group? You have a group created in the application of Contact with these names? Or maybe that you click on reply to all to create the message?

  • my notebook, ProBook 450 G2 go goes into sleep mode when well even parameters of energy set to never.

    My notebook, ProBook 450 G2 goes into sleep mode when well even parameters of energy set to never. The operating system is Windows 7 Professional.  I had a technician Microsoft verifiez_ the. I also had HP tech check the. They both said that it was a hardware problem. I sent it to HP to fix it and they replaced the motherboard and said that they have tested. When I came back, it entered into mode 'sleep' again. I left my laptop for about 15 minutes and when I came back it was in mode 'sleep'. This always occurs after the laptop remained for about 15 minutes.

    Does anyone have a solution?

    I sent my laptop repair HP. They replaced some cables and motherboard, but it does not solve the problem. They finally replaced the Windows 7 operating system. Basically they gave me a new system. I spent 3 days to update windows with all the updates and then re-loading of my programs. What a mess!

Maybe you are looking for

  • Portege R100 and new hard drive

    I think to put in a larger capacity internal hard drive - 40G is now a little bit :( Does anyone do this? The traps? Any suggestions on compatible drives? TIA

  • standby does not

    Sleep button no longer works. an easy solution? No restoration? also sound is terrible. tried all the fix - it

  • JUnit test of an ADF application when you have nested application modules

    HelloWhen you set up a device for JUnit test in the model of the ADF, and you have nested application modules, there are advised to have a class of the device for each module of the application, or create a luminaire of class for the root application

  • No feedback on the API calls

    Now that I have my API calls work, I get all these calls return data. Will only the API calls to return the data on mobility programs?Brian

  • ESXi free 6. Might be a stupid question, but how/where to get the license for?

    Hi allEvery time I try to download and then navigate to the license key for ESXI hypervisor 6.0 free I get redirected to "My wmware" page where I can download / select 'vSphere and vSphere with operations management', but which does not provide me wi