Engine install 64-bit InstallShield has stopped working

Similar Questions

• Synaptics touchpad 64-bit improvements has stopped working.

  Hi guys,.

  I recently bought new HP 15-r022tx Notebook PC (product number: J6M27PA) which comes with free back, installed windows 7 x 64 and set to update all drivers HP online, after all the last update I get an error message at startup "synaptics touchpad 64-bit improvements has stopped working".

  

  have tried to configure the settings of the mouse but wen I try to access the setting of the mouse, I get an error message "unable to connect to the synaptics pointing device driver.

  

  have uninstalled and re installed driver from hp support still the same problem.

  so after some research online and no luck in one of them, I continued using tour by closing the program on the first error message every time you start no function touchpad synaptics as two key scrolling, zoom etc... but sometimes the cursor jumps erratically all about and moves on its own with no contacts in the touchpad, click options do not work wen cursor strats to move each time you start himself, after an observation that I noticed that the mouse works well on (by closing the program some special functions on the error without touchpads) until I right click it (sometimes after the first click a few times After several clicks) until I right click on using the keyboard, the mouse seems to be working well but after I right click of the mouse, he goes to his way.

  any suggestions guys

  Thanks guys...

  Finally, I found a fix for the touchpad driver. Looking at the page of the recommended laptop touchpad driver laptop 15-r022tx, I noticed that in the tab system requirements, only Windows 8 is mentioned. It seems that this driver only works for Windows 8. In Google search again for the Synaptics touchpad driver, I found this link to the HP Web site.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=ob-116587-1

  This driver is supported for all variants of Windows 7 - x 32 and x 64 (as told by the website).

  The driver in this link works perfectly well for computer laptop 15-r022tx. Downloaded and installed the driver. He followed with a reboot. The multi touch features and scrollbars now work correctly in my Windows 7 x 64 operating system.

  PS: If this solution helped you, please give a shout out to this post.

• Host of the print driver for 32 bit applications has stopped working (v515w) - cannot print in addition to the test pages

  My printer is Dell v515w Red

  Currently, I can only test pages print.  When I try to print from any other application, I get this error-

  Host of the print driver for 32 bit applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bd3ca

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7600.16559

  Timestamp of Module error: 4ba9b802

  Exception code: c0000710

  Exception offset: 000000000006e3f9

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  Additional information 1: 3edf

  More information 2: 3edf0feac74021b377b392a0115d74c0

  Additional information 3: bf41

  Additional information 4: bf41409fee27240aa0d3cd0ee9bc9fa9

  I've updated through microsoft and dell and some solutions.

  What is a dell problem or a problem of microsoft?

  My features are-

  Studio Dell XPS 1645, Win7 64 bit, IE8

  extacy1375,

  Unplug the printer.

  Uninstall the printer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download 64-bit Vista drivers and save them on your desktop. Install the drivers for Vista 64 bit in compatibility mode.

  Links to the 64 bit Vista drivers are to...

  Wireless printer Dell V515w All In One Printer - owners (RED) wire

  Rick

• Host of the print driver for 32 bit applications has stopped working. Why?

  Host of the print driver for 32-bit applications has stopped working msg apear when giving the print on my RICOH printer N/W command. Why?

  * Operating system: Windows 7 64 bit * 32 bits of MS office 2010 * Print driver 64 bit PCL6 * Adobe Acrobat Reader x.

  SPLWOW64.exe event name: BEX64

  Please give a solution.

  Hello

  (1) did you do changes on the computer before this problem?
  (2) what are the types of documents that you are not able to print?
  (3) is the issue limited only with the Microsoft Office program?
   
  Step 1: Test the problem to the boot to check if it is a question of software conflict. A clean boot to check if startup item or services to third-party application is causing this issue.
  Try to install the updates in clean boot mode, and check if the problem still persists.
  You can read the following article to put the computer in a clean boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
  Step 2: Download printer driver last OEM
   
  Step 3: Uninstall printer related software l and features

  un) go Panel.

  (b) select Uninstall a program under programs and features.

  (c) click on printer drivers , and then click Uninstall.

  (d) wait until the process of uninstallation is completed, restart the computer.

   
  Step 4: printer installation and driver when prompted then only connect printer and check if it helps.
   
  If the question is limited to Microsoft Office, I suggest to return the items listed below and check to see if they help.

  How to troubleshoot print failures in Word 2010, Word 2007 and Word 2003?

  http://support.Microsoft.com/kb/826845

  How to solve printing problems in Word 2010, Word 2007 or Word 2003?

  http://support.Microsoft.com/kb/826862

  Hope this information helps.
   

• Cannot print the financial dashboard on message of 64 bit windows 7 host computer driver print for 32 bit applications has stopped working

  Original title: Windows 7 print driver host for 32 bit applications has stopped working

  Hello

  In my company, we have a Windows 7 (Professional 64 - bit) computer with installed on financial Edge(32-bit). We have been able to print from this fine machine, but recently we changed a printer of Conan for a Dell 2150cn Color Laser Printer (64-bit driver). Now, when we try to print from financial dashboard, we get the following error:
  Host of the print driver for 32 bit applications has stopped working

  Problem event name: APPCRASH

  Application name: splwow64.exe

  The printer is not a network printer, it is physically connected to the machine. In addition, it seems to print very well, if we are not trying to print from financial dashboard. Unfortunitly, once we try to print from financial dashboard, we cannot print from something else. In addition, financial dashboard can sometimes print (this is rare). I uninstalled and reinstalled, using the drivers that came with the CD (tried to download through the Dell website, but Windows seems to hate this driver)

  Hi IToccrra,

  1. the computer is in a domain environment?

  2. who is the provider of the financial advantage program you're talking about?

  Method 1: Try to print in clean boot

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Method 2: Run the printer Troubleshooter

  See the following site:

  Open the printer Troubleshooter

  http://windows.microsoft.com/en-us/windows7/Open-the-Printer-troubleshooter.

  Method 3: update the printer driver

  See the following site:

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

  The details of the error are telling us that the accident occurred when the host of the 32-bit printer driver tries to use the printer. Apparently, you are trying to print from is a 32-bit program, and is not able to use 64-bit print drivers correctly. I would also ask that you contact the vendor of the software (from when you try to print) to check the issue.

• Dell 2230 Laser Printer sometimes I get this message: host driver printer for 32 bit applications has stopped working.

  Recently, I started using a new computer - a Dell Precision M6700 with Windows 7. Previously, I used a Dell with Windows XP and had no problems with my printer. Now, I have intermittent problems with get this printer to work. Sometimes it works fine, but sometimes, I get this message:

  Host driver printer for 32 bit applications has stopped working. I clicked so he could find a solution online, and it is never able to find one. I just get another message that says:

  An unknown error occurred while printing.

  Problem event name: APPCRASH
  Application name: splwow64.exe
  Application version: 6.1.760.1.17777

  Do you recognize this problem and is there a solution?

  Hello

  I suggest to go through the steps from the link provided and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  If the problem persists, you can also run a full scan using the Microsoft Safety Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  You can also contact Dell to:

  Product support

  http://www.Dell.com/support/troubleshooting/us/en/04/troubleshooting/ProductSelector

  Hope this helps and keep us posted.

• Epson Stylus Photo R240 Easy Photo Print error: install shield setup launcher has stopped working.

  original title: r installshield Setup Launcher has stopped working.

  Have all the answers to this question, he just happen to me.

  Dear Debbi,

  Thought you might like to know I finally solved my computer problems. The saga begins, rank Techbubbi we spent seven hours trying to solve the problems without result.

  Looking through my papers of computer I found that I had purchased an extended warranty with Hewlett-Packard on my computer, rang them told them I had used Techbubbi, they began to look at my system and try things varius does ot fix the problem. It was decided that a full erase of the hard drive has been the only answer and restore the computer to its factory settings. I had done a backup a few days before. After the reset, I'm on the Epson/Vista webb page and downloaded Easy Photo printing more Creativity Suite I found that I also need to download the print Module easy all these are on the software page of Epson creativity. The new version is slightly different to the former, but I have finally it come back and have got rid of the Installshield R Setup and Setup.Exe problems. I hope this helps others out there with the same flaws. Thanks again for your help. Colin

• Cannot install the printer. spoolersrv has stopped working

  setting up a printer and get a message error-spoolersv has stopped working and was closed - what should I do?

  original title: Spooler problems

  Make sure that the printer is compatible with Vista and that you use the correct software, driver and firmware for the printer AND your version of Vistahttp://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.  Go to the web site of the manufacturer and get the files the most up to date available for your printer and your version of Vista and re - install to make sure that you have the most recent versions (those that come with the printer may be obsolete or wrong operating system).

  How do you install the printer?  What is the manufacturer, brand and model printer?  This printer has already worked before or is this new - and if it worked before, it never installed on a Vista system?  Is it on a network or connected to a single PC (and how is it connected)?

  Go to start / Control Panel / Admninistrative Tools / Services and check that the print spooler is set to automatic and started - if it isn't.

  Check the settings on the control panel of the printer itself to ensure that it is correctly configured.

  If necessary, go to start / Control Panel / Printers and right click on the printer and select properties and choose Print directly instead of via the spooler and see if that solves the problem.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I fix the Adobe Photoshop Lightroom 64-bit message has stopped working?

  I get a message that my Lightroom program has stopped working and I can't get anything done.  This could be the cause?

  Hi staceyb1982,

  Could you please check the event viewer and let me know the path of the defective Module.

  How to check the event viewer: http://windows.microsoft.com/en-in/windows/open-event-viewer#1TC=windows-7

  Also, try the following steps:

  • Please go the Edit option in the library Module, then go in the preferences.
  • Go to the performance tab and uncheck the option "use graphics processor.
  • Restart lightroom,

  Please let us know if it helps.

  Kind regards

  Tanuj

• Cannot install Skyrim, error Installer has stopped working.

  I can't install skyrim.evertime I run setup.exe it always stopped working, im already try with run as administrator but dint work, im using regutility setting instead my setup it makes my computer error can't start windows correctly.and this problem not only akyrim.lots of my program cant stat too.this happen when im reinstalling windows 7 ultinate.

  Hello

  • Do you have an error message when you run SFC scan?
  • Have you tried to install the game on another folder and check?

  Program installation or removal fails due to corrupted registry or install blocked key. Follow these methods and check if that helps:

  Method 1: Unregister and register the Windows Setup program again

  1. Click Start, click run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
  2. Click Start, click run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  Try your application based on Windows Installer again.

   

  Method 2: I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also refer to this link: http://windows.microsoft.com/en-us/windows-8/how-find-remove-virus

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• Install (R) Setup Launcher has stopped working

  When I try to uninstall a program I get this error message that Setup Setup Launcher (R) stopped working what can I do about it?

  Hello

  It is always helpful if you give the name of the program

  Try the free version of revouninstaller to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

• Windows Media Player (32-bit Vista) has stopped working. It does not open when I click on a file that uses or from the main menu. I tried to download and re - install, but get the message "you already have the latest version of Windows Media Player.

  Windows Media Player does not work for music or videos (Vista)

  Hi Palmdoc,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  You cannot uninstall and reinstall Windows media player in Windows vista, because it is integrated inside the operating system.

  This problem occurs because the Windows Media Player library database is corrupted.

  See the below Microsoft article and try the steps mentioned, check if it works.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media 32-bit Player has stopped working with the error "failed to run the server.

  Original title: Windows Media Player does not start

  I am running window 8.1 on a HP laptop.  I have the two 32-bit and 64-bit Windows Media Player installed, I can start 64-bit with no problem, but 32 bit work do not.  When I try to play music directly I get the error "Server execution failed", I tried all the option provide fron uninstall and reinstall as has been suggested, but nothing helped.  I need to have the 32-bit to run or have the 64-bit by default. Help!

  Thanks for the reply, but after working with it, I solved the problem.

  1. rename the program (x 86) folder (32-bit) / Windows Media Player for everything you want

  2 copy the Windows Media Player folder in the Program Files (64-bit) folder and paste it into the program file (x 86) folder.

  3. This puts an uncorrupted in the default path, Windows Media Player

  This worked very well for me.  It also leaves a version uncorrupted for future needs.

  Sometimes simple is better.

• Microsoft Wireless nouse model 1050 on 32 bit vist has stopped working how to fix it and if I uninstall how can I reinstall

  wireless mouse market works but shuts down for no apparent reson, I'm not good with computers and need a simple fix

  Hi Sandra,.

  You can try to install the latest version of the drivers for the mouse and check.

  For more information, you can consult the following article:

  Troubleshoot the failure to find new mouse connected to your USB port

• Engine simulation enlite 2.0 has stopped working. __

  That's what I do when I use my computer with myitlab. And myitlab says it's a matter of windows. Could someone please help.

  This site suggests that there may be a problem with an ActiveX control.

  myiltab: "Engine of Simulation Enlite 2.0 does not work or is not responding" error
  http://pearsonsite3.custhelp.com/cgi-bin/pearsonsite3.cfg/php/enduser/std_adp.php?p_faqid=7232&p_created=1229959395

  Rather than use the option run mentioned, if you save the setup.exe file on your hard disk and open via right-click, then choose the option "Run as Administrator", you could get a better result.