Engine InstallShield (iKernel.exe) could not be launched.

Hi, apologies if this isn't the right advice.

I tried to install a genealogy on the FamilySearch site program, but when I try to run the setup.exe I get this message
Engine InstallShield (iKernel.exe) could not be launched. Class not registered

Can someone help me in very simple terms.

I use a Satellite C660D if that makes a difference

Thank you

> I got the solution. I had to briefly disable my Avast antivirus Setup and ran without any problems at all.

Great! Thanks for sharing this with us!

Tags: Toshiba

Similar Questions

  • Engine InstallShield (Ikernel.exe) could not be installed!

    Hello please help med with the problem I had on my Windows XP. When I try to install a new driver this error pops up whenever "Engine InstallShield (Ikernel.exe) could not be installed!".

    I tried to fix it with different GUIDS and I even been to installshield consumer Central and tried to open it it help but I can not get opend. So now I ask for help here.

    Please answer

    Hello

    ·         What happens when you try to open the installShield consumer central assistance?

    I suggest you follow the steps mentioned in the article below.

    Error in Ikernel.exe when you install programs using InstallShield

    http://support.Microsoft.com/kb/810608

    I suggest you to contact the InstallShield consumer for additional help center. Click on the link below.

    http://www.flexerasoftware.com/support.htm

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.

  • Engine InstallShield (Ikernel.exe) could not be installed! (Helpppppppp)

    Hello guys please help me... i use a version Home premium windows vista and I'm having a problem with the instalation of microstation!
    When I run the installer... it turns out a message, (engine InstallShield (Ikernel.exe) could not be installed!)
    What should I do? Please help me!

    Thanks in advance!

    Hi Humancode,

    A. what service pack is installed on your computer?

    B. you install this software for the first time on this computer?

    This problem occurs because of a change in design for the system profile in Windows Vista.

    You try to install the hotfix from the link below and check if it works.

    http://support.Microsoft.com/kb/939677

    For more information about InstallShield, visit the following Web site:
    http://www.InstallShield.com

    You can also post your questions in the forums of installshield.
    http://community.flexerasoftware.com/forumdisplay.php?f=133

    NOTE: The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • The engine InstallShield (iKernel.exe) could not be installed. The system cannot find the specified file.

    I am running XP Pro and I am trying to install a program, and I get this error code: motor InstallShield (iKernel.exe) could not be installed.  The system cannot find the specified file.  How can I solve this problem?  Thank you.

    Hello

    · What program are you trying to install?

    You can check the link and try the steps listed: error Ikernel.exe when you install programs by using InstallShield: http://support.microsoft.com/kb/810608

  • Error message: Winlogon.Exe could not locate the item. This Application did not start because Comctl32.Dll was not found.

    Update of security hung up during installation. I waited 12 hours for the update complete and nothing happened. Whe I reboot XP P4 syster, I get the Message from messageError: Winlogon.Exe could not locate component. This Application did not start because Comctl32.Dll was not found.

    Re-installed SP3... Installed hard drive then... cloned old drive and new drive... After several updates, it seems to do very well. Tried several programs/operations and seems normal. One day turned but didn't have to build another system or this one back up.  Thanks for the idea.     F

  • I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

    I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

    Hello

     
    Try the steps listed in the link below and check if it helps:

    "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

  • error message: "ALCXMNTR. EXE could not properly initialize to start my computer

    I get an error message when my computer starts and if he says 'ALCXMNTR. EXE could not initialize properly"and now I have connection problems

    ALCXMNTR. EXE seems to be associated with sound card drivers. I would reinstall your sound driver to the latest version.

  • Loading of Windows XP on a Dell Inspiron 1300: "file \ntkrnlmp.exe could not be loaded disk #2 (code 7).

    I'm reloading Windows xp home edition to a formatted hard drive and floppy disks. The error ' file \ntkrnlmp.exe could not be loaded disk #2 (code 7) "makes its appearance. What should I do to correct this?

    I'm reloading Windows xp home edition to a formatted hard drive and floppy disks. The error ' file \ntkrnlmp.exe could not be loaded disk #2 (code 7) "makes its appearance. What should I do to correct this?

    Please read the steps of troubleshooting for that mistake HERE. If you want more help back post.

  • File \i38\system32\ntkrnlmp.exe could not be loaded. The error code is 32 768. Implementation cannot continue.

    original title: I get an error code 32768

    File \i38\system32\ntkrnlmp.exe could not be loaded.  The error code is 32 768.  Implementation cannot continue.  How can I fix?

    Hello

    · What is the number and the model of the computer?

    · Which edition of Windows you install?

    Try the steps listed in the link below and check if it helps:

    "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

  • file ntkrnlmp.exe could not be loaded error code 7 2 times I tried by diskette.

    My cd-rom drives do not work on my windows xp media centeredition 2005. I have loaded windows XP on 6 disks

    on disc 2, it won 't finishes loading.

    Hello
     
    1. are you able to use the CD to the other CD drive?
     
    See the methods in the article below and check.
     
    "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during Windows Setup
    http://support.Microsoft.com/kb/318729
     
     
    I hope this helps.
  • Apoint.exe could not load lanucher DLLs at startup

    Hi all

    any ideas how to fix this error.
    Is it a virus.
    Apoint.exe could not load lanucher DLLs at startup
    T

    Hi all

    any ideas how to fix this error.
    Is it a virus.
    Apoint.exe could not load lanucher DLLs at startup
    T

    Alps pointing device driver...

    If it is a laptop, get the latest touchpad driver and install it.

  • Dsetup.exe could not be located, this version of Chrome is no longer supported. Please go to asupported browser.

    I get many error messages with my new build. I get "Dsetup.exe could not be located" in steam, I get "this version of Chrome is no longer supported. "Please upgrade to a browser improved" within google chrome, and I also of ' plugin Java is outdated, please update. "however I have installed the latest Java several times and it still shows this. I installed all the drivers several times, and yet, it still says they are all overwhelmed.

    EDIT: I tried to use the Windows 8 disk I used to install the OS on my pc and tried to use the refresh parameter but it failed. I used sfc/scannow, and he returned without error. I have installed GTA V, which took me forever, only to receive "Steam cannot be initialized. Restart and try again. "It would seem that install for me does not work.

    I am also having a problem that when I use the PC, the mouse shows an arrow with the loading thing, and I won't be able to type up what I have click again on the screen. I did a virus scan and my pc appears to clean.

    Help, please.

    Thank you

    Hello

    Thanks for posting your query in Microsoft Community.

    I understand that you are facing problems with the PC and I'll be happy to answer your query. Let me ask you;

    • Are you facing problems when you use Internet Explorer?
    • The issue is specific to Google Chrome?
    • Remember to no particular change in the computer before the show?
    • What security software is installed on the computer?
    • What is the brand and model of the computer?

    If the problem is specific to Google Chrome browser, I'd recommend contacting the Support of Google Chrome for the best possible answer.

    In order to make the stable mouse, I recommend you to install the latest drivers from the mouse on Web site of the manufacturer of the computer for the same model of computer you have and check.

    If the problem persists, please come back with answers to the questions so that we can continue to research the issue and help you accordingly.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • The files could not be changed because Adobe Photoshop CC 2015 could not be launched.

    How is it that I get the below error when I select a batch of images in Lightroom to edit in Photoshop:

    "Could not be displayed because Adobe Photoshop CC 2015 could not be launched."

    However the 5 files open in Photoshop before the above message appears and I have to click ok for each file not open remains to be edited in PS.

    Then I find that another copy of each file opens in fact twice in photoshop.

    Then, I get this error box:

    An internal error has occurred

    AgStoreProviderSession:getEntityByID: id must be a number or a string.

    It's wasting a lot of my time. It started happening in Lightroom 6, then was briefly fixed when the sloppy until October update was released, and then reintroduced in November was last updated.

    I looked at my application logs (go to the Explorer, do a right click on the system, choose the gale, go to the activity log, applications) and it was a mistake starting Photoshop.  I reinstalled Photoshop and now it works.

  • "CreativeCloudSet - Up.exe could not be downloaded.

    I have a new laptop and I get this error when I try to download my first application "'CreativeCloudSet - Up.exe could not be downloaded.'" I am running windows 8 and using IE 10.

    Ideas?

    Thank you

    Hi SailmanDouglas,

    You are on a managed network. If Yes, then try to connect to a source of alternative network and try to reinstall.

    Consult the KB: http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information.

    Kind regards

    Romit Sinha

  • The install Shield engine (iKernel) could not be launched. Class not registered

    I download the PAF ancestral free program and it is saved.  When I try to open the file from apps (download) my Avast anti virus application for leave (sandbox or normally open) if I use either I get this box and can not go any further. Thanks to someone.

    Hello

     
     
    1 did you do changes on the computer before the show?
    2. the problem occurs only with this program?
    3. what version of operating system you are using on the computer?

    Method 1:
    You can check the link provided and check if it helps:
    Error in Ikernel.exe when you install programs using Install Shield
    http://support.Microsoft.com/kb/810608

    Method 2:
    Alternatively, you can try to disable the antivirus software and check out:
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
    Note: The computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

Maybe you are looking for

  • Cannot find my gmail

    The first entry in Firefox OSI, we have the gmail icon that I lost it. I just add my user name and my password and he agreed, but now I can't find my gmail webapp

  • Satellite L455D - How can I disable touchpad & WiFi slow

    I just got this new laptop and I really NEED to disable the touchpad. It drives me crazy jumping everywhere when I type. I tried Fn + F9 and it does not work. I looked in the control panel and I can uninstall the drivers, but can't turn it off. I lik

  • Screen LCD Satellite pro M10 max resolution.

    Hi, sorry for my bad English, my question is:Satellite pro M10 laptop internal LCD max resolution is 1024 x 768? excluded you superior resolution with scrolling? I read in the specific techniques of my laptop max internal resolution is 1280 x 1024 is

  • Vista - Cannot install KB2183461 (crashes at 92%)

    KB2183461 for vista 32 bit stops installation at 92% and the 700w Windows stops "to help prevent damage. This problem lasts for a month. Upon the closing of the pc (DELL XPS M1330) he tries always to install the update, one of which he manages never

  • HP LASER JET P1102: Scanner error Laserjet P1102 52.0 Professional

    Hi, I need some help or advice I can't use my printer 3 months when I try to print I get an error message like this "scanner error of 52.0!" I want to find a solution for this problem!