Engine reading Mercury and NVIDIA cards
I assumed that this has been discussed in the past, but my research turned up empty.
I run CS4 body for a while but am upgrading to 5.5 organization and I also want to go ATI to NVIDIA to get CUDA mercury reading improving.
I'm glad I checked that I discovered that only a very few cards consumer (no Quadro) is listed.
I want to go with the consumer line because my PC is also used for other things and is not a PC edition devoted.
If it's true that these are the only ones that work? Or is that a lot of PC of areas where things work (such as memory and motherboards), but not everyone is put to the test...
I saw a site where it said that you had to hack a file or something in order to get other cards NVIDIA Cuda to work in the mercury with Pr Pro mode even if they were equal to or greater in power than these...
Thanks for the help,
BJBBJB1
I guess the question is if you think Adobe is likely to reduce the number of cards taken in charge or he hard code in the program. Personally, I think CS6(+?) could fully support CUDA cards.
FWIW, I just do the hack with my GTX 560 Ti card and it worked. I'm running the PPBM right now. Unfortunately, my AMD Opteron 165 system based, RAM DDR (not number) based has a LARGE number of bottlenecks that kill performance, BUT it's much better with the 560 card than without!
The previous card, I had was an ATI Radeon X1950XTX. However, I gave up on them after that they don't provide for her drivers for Win7. Yes, the Vista 64 drivers worked, but without support, I have a quite expensive anchor point. IMO, Nvidia, however, is much better than ATI in driver support. So I will stay with them for a while. Just my experience, though. Hey, I have a few old 6600GT cards and Nvidia has drivers for Win7 64-bit available. And it's an old card. In any case...
The GTX 570 should provide more than enough power for the current iterations of first. ATI provides an 'equivalent' (OpenCL), but Adobe, for some reason, is not support.
I hear you on Adobe supporting a larger number of CUDA cards. I know that CUDA programmers and they tell me that the code is not limited by the cards. You call the driver/CUDA features card and it works. So I'm at a loss to understand that. It simply limits their customer satisfaction. It is not like they are not big enough to test.
FWIW, the GTX 560 it seems to work well with CS5 and I guess would work well with CS5.5.
Good luck in your adventures. As I buy the additional hardware, I'll try to update here.
Scott
Tags: Premiere
Similar Questions
-
Reading Mercury and Quadro K2000 engine?
I use Premiere Pro CS6 and have the graphic card Nvidia Quadro K2000.
The section "video rendering and reading" project settings is gray, not allowing me to access the mercury playback engine at all.
Anyone know how I can use the acceleration of mercury with this card?
Much appreciated!
If your nVidia card at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a file "supported cards.
-
Hello, what new NVIDIA cards work better with CS5? Listed for NVIDIA video cards are old...
Thank you
Craig
Don't know what you are really asking for. All the 'work', you gave have installed them properly, but "better"? It's almost a moot point, at least with AE. It uses OpenGL sparingly, is not really relevant. Each contemporary map will be fullfill these requirements. You can throw it in a 3 year card, since the tray of 20 dollars for the budget, and you would see no difference for a 400 high-end one buck. Pretty well, this applies to EI, but in some extent to Photoshop and other programs. The one notable exception here would be Premiere Pro if you want to use the Mercury playback engine, but if you do not - well, save money, buy a mid-range card at best.
Mylenium
-
GTX 570 and first CS 5.5: engine reading Mercury does not seem to work
Hello world
I get choppy playback and a red bar on first CS5.5 whenever I apply to a clip of one of these effects: no effect on the deformation, the noise alpha folder or the Magic Bullet Looks 2.
The sequence is an AVCHD 1080/24 p, first preset and multimedia files are AVCHD to a GH2 (1080/24 p to 24 Mbps).
My system is more or less like this:
- Motherboard: Gigabyte Z68X-UD4-B3
- Processor: Core i7 2600 k
- RAM: 16 GB DDR3 Kingston HyperX 1600
- Graphics card: Gigabyte GTX 570 1280 MB (it comes factory overclocked)
- (Only a screen 1920 * 1080 is attached to the graphics card right now)
- Hard drives: 3 Western Digital Caviar Black 1 TB set out the following:
OS c:, Program Files, swap file
g: the project files and media
h: Previews
And now the symptoms: sequence In an AVCHD 1080/24 p with clips AVCHD 24Mbps, all in the same video track, whenever I have applied an effect of alpha folder, Magic Bullet Looks, or noise of deformation (and probably no hardware acceleration effect) render bar changes from yellow to red and I get choppy playback unless I set the resolution of reading to 1/2. If I change the playback engine Mercury adjustment of the hardware to the software as usual. So I think that the GTX 570 does not work with first CS5.5 for some reason any. In this thread (http://forums.adobe.com/message/3736541) some people had even complained. Also feels quite slow. For example, a clip of 30 seconds with an applied effect of Magic Bullet Looks takes 150 seconds to pass from red to green.
I tried to completely uninstall the nvidia drivers and installing the last to no effect. I'm kind of frustrated, I chose this system and CS5.5, thinking that it was going to be a smooth experience and I'm a little disappointed right now. If all goes well, there will be a fix for this. Or maybe I am doing something wrong myself.
Thank you in advance and sorry to bother you with this.
See you soon.
Diego
It depends on your memory and the degree to which pass you the RA, EN, AE and PS and others. With 24 GB, it is not really important. With 12 GB but switching limited and the use of AVCHD material, it is not terribly important. Material Red4K and no more than 12 GB it can pay to move the pagefile to H.
Therefore, there is no clear answer. It depends on your workflow, your source, your memory material.
-
Engine reading Mercury does not work in the new version of PP 2014?
Hi everyone, I just downloaded the new version of PP 2014 to get the following message while downloading a project I've been working on:
"This project has been modified used with playback engine mercury acceleration GPU (cuda), which is not available or not certified on this system. Software playback engine Mercury only will be used "."
So, I make a trip to the playback settings in preferences, and there is simply no option to turn on the reading of mercury. I have a Nvidia GeForce GTX 760 and so far I've never had to make only one thing on my system, no matter effects how much I had to apply (working with DSLR raw images). Now I get loss of images and red lines everywhere in my sequence? Is there a way to remedy this in the new version of PP? If it's not I'll uninstall and stick to the old version.
Thanks in advance for any help,
Kevin
My bad, I was looking in the wrong place. I've now changed to the GPU acceleration and it works great!
-
Photoshop CS5 and NVIDIA GeForce GTX 295 Crash
My profile:
Photoshop CS5 (x 64)
Windows 7 x 64
NVIDIA GeForce GTX 295 (latest driver v197.45)
Intel i7 920 2.67 GHz
My card is listed as tested for CS5 and NVIDIA card says that it's compatible with CS5, but today after using it, my screen went blank and the display driver recovered himself. It took about 5 minutes until Photoshop CS5 became responsive and the GPU features have been disabled. I will try GPU in advanced mode and basic instead of the normal mode to see what happens, but it's a shame that I have problems of this kind. I also had problems with CS4 like that.
What I did to cause this problem: "I clicked on" Place... "to place an object, and that's when it crashed. It happens randomly that I use Photoshop. Please NVIDIA or Adobe to solve this problem. I love the GPU features and I want to run them, but this crash is boring to spend as much on the purchase of this product. I hate to have to pay to contact Adobe technical support, it should be included with the purchase of the software!
How do I fix this without having to go through the mode based GPU or disabled GPU?
Well my crash started back with the latest drivers again with the registry tweak and even disabled completely OpenGL. I was going to start to use Gimp but decided to make one last search and then found this thread: http://forums.nvidia.com/index.php?showtopic=179747&st=20
Holy cow, thanks to this thread, I solved the problem! This idea of downclocking the card itself and other questions related power led me to this fix: go to the NVIDIA Control Panel--> manage settings 3D--> global settings and opt for 'Power Management Mode' 'Prefer Maximum Performance' (the 'Adaptive' default setting value seemed to be the culprit). And that's all! The key here is change the setting of "Global", as my individual programs were already set to 'Prefer Maximum Performance'. I have worked very well for 3 days now, and I can cause the error to happen again by changing to "Adaptive".
I do that and then turned backon OpenGL and set it to 'normal' and so far I've not dropped yet. For all of you who read this, I'll update if I have everything longer blocks, so if there is no more info about me which means this fix has remained strong.
-
CS5 and NVIDIA GTX 400 cards (GTX285 is more current)
Given that NVidia has just published the GTX470 and GTX480 cards, is it reasonable to assume that they will work well with first Pro CS5? The GTX285 is outdated at this point and not really when purchase is worth compared to the GTX470.
The new Mercury engine works pretty well on any of the newer Nvidia cards, with only 285 mentioned due to lack of time to test all the permutations? I can't imagine that he would not be executed on a system GTX470 or GTX 260 for example, since the drivers are the same for most of the newer Nvidia cards.
-Roger Uzun
MPE of hardware rendering is enabled that for certified cards and Fermi is not yet certified. It will come with a new version. If you have or purchase a card CUDA, which is not certified, it is not possible to enable rendering of MPE material. If this card will be certified within a few months, you wait for the release point for that.
-
Nvidia card must be connected to CUDA Mercury acceleration?
Before I go spend a bunch more money on display cards...
Let's supposed I had an ATI 5870 driving 3 monitors... and I also had a 4000 Quardo installed... but connected to the monitors of no....
First always see and use the 4000 CUDA cores to accelerate the performance of first?
Briefing note 1
I had already enough degradation of performance and hassle trying to run a 4870 + GT120... so I will try to avoid mixing the brand cards different monitors in 1 line system
Briefing note 2
I'm on a full charge MacPro Nehalem 2009
No, Yes. There is no need to connect monitors to use the Quadro 4000 card. It requires however correct installation of the operating system.
If you ask a question next time, do it in a clear and understandable way.
Nvidia card must be connected to CUDA Mercury acceleration?
N ° it must be installed, but not need to connect to monitors.
First always see and use the 4000 CUDA cores to accelerate the performance of first?
Yes. If properly implemented.
Try to avoid the conflicting issues and create confusion.
-
Portege R500: Card reader SD and ODD do not work - drivers needed
I have laptop portege R500, product number: PPR50E-04X04WCE.
last year, I changed the operating system and installed windows 7.
Since then, I can't use the dvd drive or the sd card reader.
And the control panel it apears two unknown devices, but I can´t find the controllers for these.What can I do to fix this?
I assume you found unknown devices in Device Manager.
Check it please http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
Here you can find instructions how to identify the unknown devices.I checked the Toshiba download under http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and your Portege is listed there, but under the option ARCHIVE. It is supported for Win7 so there is no problem to install all the drivers available.
Check it out please and let us know if you still have the same problem.
-
Satellite C850-B635 and Win7 - card reader does not work
My laptop came with windows 8 and the card reader was not working
but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.I downloaded a driver called card reader controller, but it did not work as well
I don't know if there is a problem or there is a driver should I install and I don't know.
Please help me solve this problem.In my windows Device Manager, these devices is not recognized:
* PCI simple communication controller
* SM Bus controller
* Unknown DeviceI tried searching in my page to download drivers on the Toshiba Web site but could not find these
Please help me make my card reader works again.
ConcerningPost edited by: domaking
For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zipIn addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.
Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.
Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components
-
Satellite P10 824: card reader SD and IrDA doesn't work
I have a tosiba Satellite P10 824 a I don't know why I can use Infra red and sd card reader.
I installed the driver but I do not have nor why I can use.
When an sd card I can't and I can't send anything via infra red.Hello
Check the Device Manager.
Are the mentioned devices properly recognized in Device Manager or there is some yellow exclamation points?
How did you install the operating system? Train the Toshiba Recovery CD or manually? This issue has been published since the first day, or you have installed any 3rd party applications?As you can see there are a lot of questions because no one knows what you have done on your laptop. In my opinion the damaged registry entries might be a reason for these issues.
I think that you should try to remove the SD card reader and Irda device after the Restart Manager again you should auto search devices.
The drivers have to update and it should be possible to use the devices. -
my computer slows down whenever I want to play a game. GRIP more memory ram and a new nvidia card.dont not know what else to do. can you help me? game comes on and goes back to the desktop wallpaper.
What games do you play?
the 3200 + is OOOOLLD and you would be difficult to run whatever be done in recent years at all
and you get drivers like that who already have your computer or MB, realtek can be obtained from the realtek site
Since you don't list the exact model of each card, we cannot say whether you are running a GF2 MX or what
and uninstall the nvidia cp stuff, then run http://www.guru3d.com/category/driversweeper/ to clear what is not respected
-
HP Pavilion Slimline PC running Vista Home Premium
Windows automatic update notification 'important' Nvidia driver initiated and displayed as usual with the Update window. Selected update and install Insider. Install showing failure error code 800F00ID. Many attempts failed to install the update. Have materialized with various protocols of the device without result Manager driver. Somewhere between the installation failed and the computer restart function disabled graphics card and had a
ripple effect to the resolution of General screen graphics including the proportions and a few other PC functions. Namely display screen/auto sleep never well chosen the management of food etc and also the PC fails to "sleep mode" when you are asked. PC should be shut down completely and then activated as and when. This rest and reboot etc update installation tries to install without success. Guidance through the online help with HP and Nvidia has proved impossible and worse still a voice call to 'aid' to HP UK sourcing is another story.Hello again Srinivas
Thank you for the continued upward. The good news is that I set the graphics in pursuing the protocols of computers own recovery, which restores the GPU "settings". Before that, I lost online due to a faulty firewall communication. I've been having fun in recovery / repair mode for days. Communication restored, restored and graphics for the time being at peace with the world... Thanks again -
DVD, and Sims card reader does not
Original title: CD - DVD My drive does not work it is the same thing with my sims card I can't open anything.
I have problems with my CR-reader DVD and my Sims read card. Both do not work
Hi yosoytodo2003,
1. When did you start to question?
2. you remember to make changes to the computer before this problem?
3. do you receive error messages or error codes?
You can check out the following link and try the fix and check if this may help:
http://support.Microsoft.com/GP/cd_dvd_drive_problems
You can also check the error messages or of unknown devices listed in Device Manager:
You can also check the link and try to run the hardware and devices Troubleshooter and check.
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I've updated the motherboard (Asus) and now Nvidia card beats nice work my PC do not play the .mp4 (with VLC, Quick time player ect..) files
And what about the Windows Media Player12?
You must uninstall and reinstall VLC Media Player, it seems codecs has been corrupted. You can also download and install ffdshow
Maybe you are looking for
-
Impossible to find Javascript on my computer
I'm on Firefox 38.01.Windows 8.1 and see any Javascript.
-
The amount of space (memory) required for the good functioning of Firefox?
The amount of memory required for the operation of Firefox? Trying to decide between IE and Firefox. Research in the new computer and need to think about which browser to use, and how much space it needs to work properly.
-
Top Sites of Safari do not stay, all the patches?
Hello smart people! I need your help. After the El Capitan 10.11.4 with Safari 9.1 upgrade, I can't Top Sites I select and shaft to stay. After stop Top Sites always comes back to the default value of apple: apple, icloud, google, twitter, Linkidin,
-
Export/copy large iMovie (mp4) on dvd or USB?
Have a great (3 hours; 15 GB) iMovie I created a mp4 file. I can't save or copy on a dvd or a flash drive. What should I do? I exceeded a limit of file size? Thank you.
-
Apologies for the long stretched to follow events first. As I'm not anyway in computer science I think it is better to describe what may or may not be relevant. I recently found on my desktop pc (I use my laptop now) a "Windows Security Center" warn