English drivers for canon mp 287 printer?

Similar Questions

• Driver for Canon Pixma IP4600 printer

  I had to reinstall Windows on my PC due to obtaining a bad virus.  My Canon Pixma IP4600 printer worked before the re - install, but now windows can't find a driver.  I spoke to Canon and they said that they offer is no longer supported, but Windows should continue to support and drivers must come from there.  I tried a driver through Control Panel, but it is said that a driver is not available.  This printer is not that old, so I can't believe that there is no driver available to all.  Can you help me please?

  I'm sorry, but as I explained Microsoft does not write drivers for Canon products.

  Microsoft writes and provides drivers for their own products.

  All drivers that Microsoft may provide in their OS for Canon products provided by Canon.

  I suggest that contact you Canon and get them to set this output or first try the Vista drivers.

  Kind regards.

• Windows 7 continues to ask drivers for Canon Rebel _

  Windows 7, asking drivers for Canon Rebel

  How your question is related to Windows Update (compared to the Windows upgrade)?

  Contact the Canon Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• drivers for epson epl 5700L printer

  Had to change to Windows 7 PC after years with XP, where default printer has been laserjet Epson EPL 5700 L.
  Epson advises that Microsoft provide drivers for this, otherwise the printer is "incompatible" with Windows 7, I find unacceptable, given that the printer is in excellent working condition.  I can find drivers Windows for EPL 5700, but not for EPL5700L.   The system recognizes the printer with 5700 drivers, but do not print. Any suggestions will be welcomed

  The drivers for printers 'old' company sometimes gets very confusing. There is little doubt that the drivers arenot available for Windows 7 on the site Epson, either 64 or 32-bit. However, the pilots are listed through the wizard for the installation of devices and printers. Do not connect the printer so much than directed. Remove all drivers installed for the printer.

  1. Restart the computer to power off the power.
  2. Start the wizard;
  3. Select Add local printer;
  4. Select Windows Update
     as the source;
  5. Follow the on-screen prompts.

  I guarantee you that the result will be usable, but this is for everything it's worth.

  Tom Ferguson

• Drivers for Canon printer

  My laptop Lenovo U410 has 8-64 bit Windows.

  I can't install my printer Canon PIXMA MP800.

  The answer is that there are no drivers.

  I visited the Canon Web site without success.

  My laptop Lenovo U410 has 8-64 bit Windows.

  I can't install my printer Canon PIXMA MP800.

  The answer is that there are no drivers.

  I visited the Canon Web site without success.

  Your problem is with Canon - the manufacturer of your device.  They support (or not) as they wish.  If they choose to not have software or drivers for Windows 8 - it's on them.
   
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp800#DriversAndSoftware

  Download drivers Windows 7 (mp800win64111ej.exe) and do a right click on it and install via a compatibility mode for Windows 7.

• Problems to install the driver for Canon lasershot 2900B printer, to get the message "installing the driver interrupted."

  I have problems to install the driver for Canon lasershot 2900 B printer. I have windows 7 64-bit (SP1) installed in my PC. I get the message "driver installation interrupted. I had downloaded and installed the latest driver and I get the same result. I was told it might be a problem with OS. I have had no problems to install the drivers for the scanner or hardware drivers. Thanks in advance.

  Original title: printer drivers

  Thanks for the reply of Ravi Shankar. My PC is a Dell Inspiron 530. There is no specific error message except for the one I provided. There is a solution to this problem. It seems that if the print spooler is disabled (services and storage via the computer management), the installation of printer driver is interrupted. I manually activated the spooler on automatic printing and the printer driver has been installed immediately.

• Windows 7 can not find .inf driver for Canon Pixma iP4000 printer connected to Windows XP.

  I have a laptop running Windows 7 (64-bit machine) I want to print from.  The laptop is on a home network wireless.  The office is wireless as well and is running Windows XP.  The Office has a Canon Pixma iP4000 printer connected with a parallel cable.  I installed the latest XP drivers for the printer on the desktop.  The laptop can connect directly to the printer with a USB cable and drivers will download automatically and it will print correctly.  However, I can't connect the printer using the wireless system.  I can go on the laptop to the home network and navigate to the printer and try to install.  It makes an automatic search and says that it cannot find the correct drivers.  I can browse to the file to install on my desktop, but it of an .exe file and not. INF.  I run the .exe file and it installs too, but Setup of printer on the laptop won't let me not by the .inf screen add to complete the installation of a wireless printer.

  Any suggestions?

  Very probably the XP driver name is different from the name of 64-bit driver.  Create a Local Port which copies the data to the print size in Windows 7.

  Here is an article knowledge base how to the names of the incompatible drivers.  Replace the Windows 7 machine for NT4 machine referenced in the article.

  http://support.Microsoft.com/kb/282842

  If you load the printer driver 32-bit on your 64-bit computer, you need the 32-bit driver for Windows 7.  You can do if you have a 32-bit computer of Windows 7 on the network to push pilots up to the machine that is sharing the printer.  None are flat files on the Windows 7 DVD, you need to install the OS or mount the ISO.

  The key to successful sharing between computers that run different printing architecture processors is pilot name.  PCL6 equal NOT PCL 6.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Windows 7 64 bit laptop on wireless network can not find .inf wired for Canon Pixma iP4000 printer driver for windows 7 32 bit PC

  First of all, I read the thread on the laptop win 7 and win XP PC with attached IP4000.  I have just isn't helping me with that.  I am computer literate network, but I have to be dumbing down, so be specific in a response, you can give it.  Please, do not assume I know something just because it can be public knowledge.  Thank you for understanding my situation!

  New Win 7 64 bit laptop connected wireless to a network home through a Netgear WNDR3700 router.  Wired to the router, it is a PC with a USB attached printer Canon IP4000.  This printer has worked without problem with this PC for years.  Add the laptop.  Try to access the printer on the network (it is set to be shared on the PC) translates into an inability to find the driver for the printer.  On the Canon download site, I downloaded and installed on both machines the driver add-on 'aomwin110ea23us.exe '.  This does nothing to solve the problem.  Then, follow the suggestions in the thread referenced above, I downloaded installed 7 - zip and unzipped the file add-on from Canon.  Guess what? -There is no, zero, nada, stupid ".inf" file in there!  I understand that I need share on the PC to both x 32 and x 64, but without a valid .inf file to point to, I'm sunk.  And the same is true when you try to add the printer to the laptop - not to point to .inf file.  Is the only thing that I have not tried to install the printer directly to the laptop via the USB port, and it's because this is not a configuration that is usable for me.  The printer must be attached to the PC.  Is there anyone out there who can help me solve this dilemma?  Please do not give me an answer telling me to download the driver - usually you tell me precisely what driver and then guide me through the process.  Rest assured that I appreciate sincerely any help you can give me.  Thanks in advance!

  Most likely the name of the driver you are using on XP to share the printer a is not not the name of the 64-bit driver.  The pilots names must match in order to add the printer as a connection to the 64-bit computer using the normal RPC protocol.  You can configure the printer on 64-bit Windows 7 as a local printer that will basically copy the data from the printer to the format to share on the XP machine using SMB protocols.

  This is a Ko for incompatible drivers when connecting XP to NT4.  Replace your server / client configuration, but it's the same process.  Make sure that you are connected to the internet and select the Canon 64 bit driver available on Windows Update (use the Windows Update button in add printer) http://support.microsoft.com/kb/282842

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Need English drivers for Windows XP on Satellite L40 - 10O (PSL40E)

  I received a Satellite L40 - 10o laptop with windows vista in the language of the France.
  I would like it downgrade to windows xp professional English, but I can not find appropriate drivers for model PSL40E.

  Please let me know where I could download the * English driver package *.

  Thank you

  Hello

  Please, visit the following link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Choose your machine and the English language, and that's all.

  See you soon

• OFFICEJET 7210: I need drivers for my Officejet 7210, printer all-in-one.

  Hello everyone, maybe someone uses drivers for an Officejet 7210 all-in-one printer?, this printer is deleted and no longer supported by HP, I bought a new laptop and now I need to install drivers...

  Thanks for your hellp...

  Daniel

  On the assumption that the OfficeJet 7210 is a member of the printers OfficeJet 7200 series (I don't know for sure - I don't have much knowledge of ink jet printers):

  My Professional 10 64-bit Windows system has a driver for the OffiiceJet 7200 series printers:

  

  You may need to click the Windows Update button in the Add Printer dialog, then wait (possibly several minutes) while additional drivers are downloaded, until the list is filled again.

  Of course, I have no idea if this driver is not working properly, or if it will offer all the features that you can.

• drivers for Canon EOS 10 d

  I need a link or a help to download the drivers for this device. Any suggestions?

  Please see:

  http://www.usa.canon.com/cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/eos_10d#DriversAndSoftware .

  You have not provided your version of Windows, so I can't give specific advice.

• Need to find drivers for Canon MX 432

  looking for a canon mx432 driver.

  Hi s william Fujimori.

  Thanks for posting.

  I understand that you need drivers for the Canon MX 432. You can download the drivers from the manufacturer's website. Click on the link here to download the drivers.

  I hope that helps!

  If you have any other questions or suggestion on Windows, feel free to ask. We are happy to help you.

• Where can I get Windows 7, 64-bit drivers for Canon XH - A1

  I have Windows 7, 64-bit, and it will not load the drivers for my Canon XH - A1 camcorder. MS site shows a possible compatibility issue, and Canon has not yet proposed any help. Is there SOMETHING out there that will run as a 64 bit vista driver? Or a dual boot is the ONLY way to go (this would mean, in my case, I have to load my old 32-bit vista, which is not that good of an option due to the huge problems I had with it. Any help would be MUCH appreciated! Thanks in advance!

  Download the file 'console11n.exe' on the Canon site, right-click on the file and select the Compatibility tab

  Choose an operating system... :-) maybe XP... Now try to run...

  If no luck, you will have to wait and see what the Canon... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• drivers for Canon mf4150

  I have a new computer with Windows 7 and do not seem to be able to get the drivers for my Cannon mf4150. It should be auto install but when I plug it in it get an error that it didn't load correctly. Any help out there?

  There are Windows 7 driver here...

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf4150#overview

• Drivers for Canon Digital Rebel XT 350 d on Windows 7 (64-bit) PC

  How to find and install drivers for my camera Canon Digital Rebel X 350 d? I have a Windows7 (64-bit) PC. Canon said that widows 7 PC site doesn't have drivers for my camera.

  Hello

  If the site says ' driver may be included in your operating system or you may not need a pilot ' then you why that you need? Your camera has a port "output" (probably a micro-USB port)? If you can, just plug the camera into your computer, turn on the camera, and it should appear in your file (e.g. Windows Explorer) Manager. It cannot be labelled as Rebel X camera, but something more esoteric like DCIN or other such lettering which is actually the name of your memory card or other less clearly understood.

  If your camera is not a port of 'exit', it is perhaps not able to connect it to a computer (which would be very strange indeed). Thanks for posting here back with more information on your camera, the ports as they are and what, if any, errors you have found. I'll try to help you, but it takes a lot more information to do this.

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup