Ensure that the XML is loaded.

Similar Questions

• My iPhone is not charging I I think that the port of loading must be cleaned, do I go to an apple store and it cost something to them to clean?

  My iPhone is not charging I I think that the port of loading must be cleaned, do I go to an apple store and it cost something to them to clean?

  They diagnose what's wrong with it.
  If it requires no parts, he (should ' t) costs nothing.

• How to ensure that the graph xy plots are present?

  Hello community,

  Since the update to LabVIEW 2014 this week, I have a problem with the code that worked (or didn't, but the problem was unnoticable).

  As example the llb I created to present the question, I'm graphic xy filling with quiete some data and then color programmatically plots.

  The problem is that if there are too many plots then the property nodes that are to color the mistakes of Mr. thow plots as if the corresponding plots were not present in the graph still - even if I used a single flat sequence structure to try to ensure that the data is written in the plot before trying their color.

  Maybe this wouldn't be in LabVIEW 2013 too - but the threshold for the number of plots was higher. All I can say is that I have observed this with data sets that worked well in 2013 of LabVIEW.

  To reproduce simply run 'color of the graphs.vi' with values high enough to 'numerisch' and ' numerisch 2 "(50 on my machine can be more about yours).» I left the terminal nodes property unwired error so you get caught up in the right position when the error occurs.

  Somehow check if all parcels are in the charts again? This way I could introduce a delay that ensures that I don't have the color of the graphics that do not exist yet - regardless of the speed of the target computer.

  Xy graph behavior has changed in 2014 of LabVIEW? Or maybe his performance?

  Best regards

  Florian

  HM, your addendum somehow answered my question. We are indeed an against the user interface thread race condition.

  Unfortunately, I do not know a method to wait than the UI thread to have access to all plots. In addition, the waiting time that you need depends on the ability of the system, which is dynamic, you know not all processes background or in parallel, running applications.

  That being said, I recommend a work around:

  1. create the data for the plots

  2. how many plots you have in query data

  3 write short dummy data in the terminal, and not the data of the whole plot

  4 Recolor plots

  5. write the correct field data

  Norbert

• Whenever I try to open other pages, they'll just be "loading" for 30 seconds then it says that the page cannot load (as if my internet is disconnected)

  Recent internet connection problems

  Recently, my internet has been acting weird. He has never acted like this before, until 2 people moved my basement and began to share Internet (maybe a coincidence, but not sure). Sometimes when I leave my computer on and stay away from the keyboard and go back some time after and open my internet browser, only my home page would be in charge. Whenever I try to open other pages, they will simply be "loading" for 30 seconds then says that the page cannot load (as if my internet is disconnected). But the problem is, when I click on network and sharing Center, there is nothing wrong with that.

  Access - LAN and the Internet

  Connection - connection to the Local network

  It's the same when my Internet works fine, but I can't just browse other Web pages EXCEPT the home page that appears when I first open my browser. When this happens, I usually unplug my modem then reconnect OR just keep trying to load a page when after like 5 minutes or more, everything works normally.

  How can I solve this problem? It is annoying and happens almost everytime I go back to use my computer after staying idle for some time.

  By the way, I noticed that I have 4 'networks '. I'm not sure what they are, but I could merge or delete them. It would help my situation?

  Control Panel-> network and interest-> network and sharing Center Center-> customize-> Merge or Delete network locations.

  I am very annoyed by the present and I would be grateful any entry in this case.

  Thank you in advance.

  Hello

  Follow the steps in this links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer.

  I'm trying to scan a doc and the message is 'not found computer. Ensure that the HPsoftware has been installed on the computer. My computer print very well so I do not know why it does not scan.

  Hello

  Thanks for the information. Two things to try. First of all, try to align your print cartridges using the controls on the printer display panel. As part of this process, the printer will print on a sheet of alignment that you place on the printer and scan in the printer. See if it works successfully. If not, see the following page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02451000&cc=us&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0011 .

  The second thing to try is the print and Scan Doctor Utility, download here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-114642-1&cc=us&dlc=en&lc=en&os=4063&product=5061082&sw_lang=. Its a standalone process and requires no explanation.

  Let me know if one of them fixes the problem.

  Kind regards

  BearPup

• Digital Editions says that the books are loaded on the Kobo and Kobo library is empty.

  Hello, I have a problem loading the content on my Kobo (Aura H2O). Previously, I was able to add books to the library without any problems following the directions online, but it has spontaneously stopped working.

  Location:

  I've loaded onto Adobe Digital Editions on my computer and books (Kobo) authorized device.

  I add the copy of the book to the device.

  When I click on "Kobo eReader" breast Digital Editions, it is said that the books are loaded.

  I eject the eReader.

  There are no books in the library.

  I have already tried:

  Relocation of Digital Editions.

  Re-authorizing the unit

  Button factory reset on the device.

  I called the Kobo helpline, and they referred me to Adobe.

  Any ideas?

  Thanks for your help.

  -Lisa

  Try to reset your player of standard parameters and starts again again?

• LTR6.2.1: import function: I imported the 4 JPGs from my iphone. the photos were black. After a while, I found that I had read in the metadata and then had the photos. How to ensure that the metadata is read in the always?

  LTR6.2.1: import function: I imported the 4 JPGs from my iphone. the photos were black. After a while, I found that I had read in the metadata and then had the photos. How to ensure that the metadata is read in the always?

  1. Turn off apply tone auto under Lightroom preferences settings
  2. Restart Lightroom and then import images again.

• Ensure that the music from Amazon on Audacity successfully added to iTunes

  I sometimes buy Amazaon vinyl and am able to 'Autorip"downloaded versions of these LPs from their site.  I also scan vinyl using the Audacity software.

  In the past, I've used balance but when I moved my iTunes library to a new HARD drive I found that this caused problems to find the music and with the help of TT2 files I managed to find everything and make sure he was in the right place.

  In the past I would just double-click the Amazon or created Audacity file in Windows Explorer, while having iTunes open so that the file has been added to iTunes, and then create versions without loss of files and delete the originals.  Is there a better way to import these files into iTunes so that the standard file/folder structure used in iTunes is maintained?

  With Amazon, you should be able to say to save its downloads ... \iTunes\iTunes Media\Automatically add to iTunes then when you start iTunes it will automatically add to iTunes and move them to the right place. There is no need to convert the 256 Amazon in lossless k mp3s, you will get the large files with no improvement in quality.

  Regarding the audacity, make sure that the files are labeled and saved in the format that you want to start, then move into the same folder above to add them to iTunes. If you must use a lossless format intermediate use aiff wav include marking information.

  TT2

• How to ensure that the battery has a long service life?

  Hello!
  I just bought a Toshiba Satellite A80 and I was wondering how can I make sure that my battery will have a long life. It is said that the battery is achieved if it is fully charged, and used the laptop to power grid. Does this mean that I have to take my battery while I'm doing this?
  Thanks for your help!

  [Edited by: admin August 6 05 14:46]

  Hey Niji

  If you need some useful information on the battery and the other parts of your unit, you can visit the site Web of Toshiba.
  I found this site:

  http://EU.computers.Toshiba-Europe.com

  Please go to support & download, then the Knowledge Base.
  This site is very good.

  Good bye

• The installation source for this product is not available, ensure that the source exists and you can access (to remove Microsoft silverlight)

  I need to install Microsoft silverlight to watch films from netflix, but it is impossible to install it; but in my programs, I have microsoft silverlight (old), I think that if I remove the old program, the new microsoft silverlight will be possible to insall it. The problem is when I try to remove the old silverlight (add or remove programs) do not remove and displays this dialog box "the installation source for this product is not available. Verify that the source exists and that you can access. I like you would help me in this matter. Thank you very much. Manuel Ortega.

  Hello

  I recommend you to ask your question in the Microsoft's Silverlight Installation and Setup forum for better support.

• Why microsoft virus removal tool removed partially viruses detected? what needs to be done in addition to ensure that the virus detected is completely and permanently deleted

  I downloaded a virus to the web site of microsoft removal tool. I did a full scan and a virus (win/32) or something of this nature has been detected. It has been partially deleted by scanning and removal of viruses microsoft tool. I need to know how to completely remove it and all other virus from my system. any help will be appreciated.

  Hello

  When any antivirus program scans and removes a virus to do a reboot to completely remove it from some parts of this virus are active. Given that the virus removal tool didn't you it restart as part of its service, it can remove only inactive parts of the virus. If you run the scan in safe mode it may have deleted all the virus. Just like removing a program, uninstaller was tell you to stop and exit the program until he could remove it. When malwarebytes running, there's a step before restarting it completely removes viruses and malicious software.

  Online virus removal tool is there so you can take control of the system and perform a local scan with your antivirus software.

  If it helps please click, "has been that useful."

  Thank you

  Jim

• How to ensure that the binary file is stored in the location specified for my DLL files?

  I'm new to computers and has a Dell Inspiron 1545 laptop with a program in Windows Vista Home Premium on a 64-bit platform. I have a thread in my sidebar gadget new MSNBC and the dates for the stories are frozen in December of last year and does not update the current stories. I had no problem with this before and I haven't added or deleted programs because of this problem to the best of my knowledge. I got advice here on the checking of dll files and 4 of them come back with saying error messages and see that the binary is stored at the specified location for debug files. I searched for information help with this and I found a few tips that not saved and re-entered the files, I tried and different versions of the idea, at first it made no difference and then I redid it and it screwed up my weather gadgets so I redid it and they worked very well. I then tried on the DLLs for the MSNBC gadget, but it doesn't seem to change anything, although the gadget to power for the Dow Jones News feed is now screwed up. Is there a site I can go to what can explain the route of binary/specified path or debug file. Save/re seems to be the right path, it affects obviously the gadgets but not as I want, any help in this direction would be appreciated at. Meanwhile I'll go back and try again.

  Hi dumdeedumdum

  
  What are the files dll are facing problems with?

   

  You can perform a SFC scan and check if the problem is resolved.
  To Perform a Scan SFC -
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Ensure that the entry is uppercase form master / detail

  Hi all
  
  I'm playing with APEX version 4.0.2.00.09 and have created a master form / detailed using the built-in Wizard. My database has a constraint which ensures all data entered must be uppercase, but retail section allows the text to be entered in lowercase. In the image below, you'll notice that description has an entry in lowercase, i.e. when it is inserted into the database, it returns that uppercase constraint has been violated. Is it possible to have some javascript (or other tricks) related to this text box to force uppercase data as the user types into it?
  
  I noticed a lot of sites mention adding javascript to 'Attributes of the HTML Form element', but I don't have this section when you change the details of projects.
  
  
  http://imageupload.co.UK/Viewer.php?file=yu7i83h5dpk5cy0npsy0.PNG

  JavaScript: since you are on version 4.0 you have dynamic actions.
  Define a dynamic action
  

  
  
  • Event: change
  
  
  • Selection type: jQuery Selector
  
  
  • jQuery Selector:

    td[headers='DESCRIPTION'] input:visible
    

  
  
  • Condition: no strings attached
  
  
  • 
    
    
    Action: set value
    
    • Fire on loading the Page: No.
    
    
    • Set type: Expression Javascript
    
    
    • Expression of JavaScript:

      $(this.triggeringElement).val().toUpperCase()
      

    
    
    • Remove the Change event: Yes
    
    
    • Items concerned:
      Selection type: trigger Element
    
    
    
    
  
  
  
  This will change the characters all uppercase when the textbox loses focus and the value has changed. (ex tab, clicking somewhere else) If you want that to happen as entry is created, you can use the "Key Release" event, but realize it's behavior embarrassing to put the cursor at the end of the string. No problem when adding, but annoying when a change to an entry (e.g. deleting a Mid-string character set the cursor at the end of the string).

  You can also add validation side Server (or calculation), but here you have to loop through the array of apex_application.g_f # partner in your column that you want to validate. Easier validations are added only in version 4.1 (no calculations though). There is also no "Post calculation calculation" on an element of presentation table as it is on a page element. (that Munky probably refers to?)

  Published by: Tom on February 5, 2013 12:43

• How to ensure that the graph of the image is registered before you add it to a report?

  Hello!

  I have a VI (comprehensive graphic image recording) that records the image of a graph with an invoke node.

  Then, I set this image in an excel report. However sometimes the image is saved and sometimes not.

  Usually, if I use a probe inside the VI it will save the image.

  I thought that with the wire of the error I will force execution of saving image of chart first and then add it to the report but it seems that is not enough...

  You have no idea why this is happening >

  Thanks in advance!

  Hi jess

  As Global Variables are missing and no data is not able to run and find the root Cause. Always Modiifed the Code. Please run and confirm. I have Modiifed in LV 2015. If you have later please refer png File.

  If his work during the probe. This may be due to timing issue with calling Vi

  Kind regards

  Master of potato

• How to ensure that the new RAM will be compatible with my computer?

  Hello

  I have a PC that I want to put a new RAM in. I know how to insert the RAM. But y at - it a chance it will not work and will not work.

  The PC is a desktop computer and Win XP Home. I hope that upgrade to Windows 7 if it is successful. 512 MB of ram currently.

  JK

  Kingston and have all two Crucial fairly complete memory configurators

  http://www.kingston.com/worldwide/default.asp - use the drop-down list upwards to the right called "research paper."

  http://www.crucial.com/?click=true - start with the drop down "select the manufacturer."

  You have your motherboard manual? That should tell you what memory is compatible.

  Or failing that get back to me with your motherboard brand and model or brand of PC and model and I will be able to help.

  Tricky