Enter a share with read rights and have read/write rights

Similar Questions

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.

• Can I plug two Airport Express units with ethernet cord and have a third Airport Express Terminal receive airplay music wirelesslly? In other words, can I combine a Wi - Fi network and roaming?

  I have an undesirable on the 1st floor, connected to the cable modem Ethernet event. I want to connect that AE to an another AE on 2nd floor with ethernet cable AND have a 3rd AE on the 1st floor to receive music through AirPlay wireless. I thought that linking the two first AEs with ethernet would improve the performance of web site on my iMac desktop, which is on the 2nd floor and connects to the 2nd floor AE via wifi. The EI the first two are newer model (MC414LL/A); the 3rd AE is old model (MB321LL/A) and is connected to a stereo Bose with a mini-jack to RCA cable double cord. I tried to set up this network using AirPort Utility, but have had no success. I don't know if it is possible to do what I want to do; and if this is the case, I don't know how to set the various parameters for each AE using AirPort Utility. I've temporarily implemented a purely wireless network; Do not connect DO NOT the two AEs with ethernet and everything works. I would enjoy my plan as above, or if I hold with purely network wireless. Any help would be greatly appreciated.

  Using ethernet network roaming between the two floors is a much better idea than anything wireless.

  The installation should be automagical if you start with the two AE plugged in by ethernet.

  It must be configured in standard roaming with identical names wireless.

  If you have any questions... Please, just after the airport utility screenshots of the configuration... but

  An express train is probably the router? You must confirm this.

  The second express is so configured in bridge... It's on the network tab, disable the bridge mode.

  

  Without thread is set to create a wireless network and simply use the same name and the same password as the other Express.

  As it should be automagical when you WAN on the second AE plugged into the LAN on the first AE.

  Wireless and then extend to will also be installed enough well automatically even if sometimes it works better in a client that extend wireless mode.

  See the Client mode.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

• Problems with my mouse, and have not been able to find a solution to the research on various forums.

  Original title: mouse problems

  I have problems with my mouse and have not been able to find a solution to the research on various forums. Here are the symptoms:

  1. you must click several times to get the menus to open. Sometimes they are not just and sometimes they open with a single click flash but do not stick until I clicked several times.

  2 several times the menu drop down and seem to become transparent (not in looks) because when I click on something on the menu, he actually selects everything that is behind the menu drop down. For example, if I'm in powerpoint and you select an item in edit mode, it might work and here again he can just select the slideview behind the menu and expand. Or well, if I'm on a Web site, such as Facebook, and I chose to close the session, rather than enable the disconnection of the key, he chooses some ad is behind the part of the menu and redirects the page of this Web site.

  3. when I try to select a Word, words or sections as paragraphs, it performs several different things: continually select as soon as I let go of the mouse button, the jumps of color selection in another part of the document, or deselects the part of the text before I even let go of the mouse button.

  Here is what I tried:

  1. I had originally a usb wireless mouse. I changed the batteries and then got a new. Now I use a wired mouse.

  2 make sure all updates for Windows and Office 2010 are updated.

  3 has tried to update the drivers mouse, says that it is up-to-date. He restored, did not work. Uninstalled and restarted.

  4 Ran Windows Security Essential and Malwarebytes - found nothing.

  5. ensure that all the Toshiba updates were up-to-date.

  I don't know how the word this issue properly in order to find information about it. Everything I typed in search engines brings me other problems unrelated to this one.

  I am running W7 64 x Home Premium SP1, SP2 MS 2010 with a mouse Dell; Toshiba Satellite C655

  Well I have stumbled on the fix... looks like there was a problem with the HID-compliant mouse. The convenience store hardware detected and solved the problem. Everything seems to work properly again.

• can I media share with Windows 7 and Windows Vista?

  I have a computer that has Windows 7 on it, and my sister has a computer with Windows Vista. We can share files, if so how?

  Hi the Itallien Stallion,

  You can share files and folders in many different ways. The most common way to share files in Windows is to share them directly from your computer. Windows provides two methods for sharing files in this way: you can share files from any folder on your computer or from the Public folder. Method you use depends on where you want to store the shared folders, that you want to share with, and the degree of control you want to have the files. Or the alternative method allows you to share files or folders with someone using your computer or another computer on the same network. If you are looking for other ways to share, this article also has several other methods that you can use.

  Once the computers are connected to the network, you can share your files and folders.
  See the link below which might help you to connect your network computers.

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  See the link below to share your files to anyone.

  File sharing essentials
  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  You can check the links below:

  Select the file and printer sharing
  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• We have a PC with Windows 7 and have had it for several years, but now can't access my account.

  We have a HP PC with Windows 7, and the normal uses are e-mail, online banking, etc, very few games and these. In the last week, I have been unable to sign my account when I try to do it I wonder an administrator password that I don't have, nor had he ever. I can access some of my files through my son's account but not almost those I need. How can I get my account back once again?

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows in two weeks.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Problem with read/write satellite U400 - 12 p PSU40E DVD on LG GSA-U10N

  Hello again,

  Another serious problem is the LG GSA-U10N DVD combo drive that comes with mine U400. For some reason he has serious problems with reading and writing to DVD. Doesn't depend on whether the media is expensive or cheap. It seems to read and write all the CD very well, however.

  I would like to avoid leaving service point (can take up to 3 weeks or more), because I need this laptop all the time.

  Is there anything we can do about it?

  My system - Vista Home Premium 32 bit has been restored to factory default and then fully update the site of microsoft, outside pilots. In addition, no other movements driver update has been made. It's just that you want it to be.

  Greetings

  > Doesn't depend on whether the media is expensive or cheap.
  Not really

  My notebooks drive can handle a lot of different CD and DVD from different manufacturers, there are cheaper and more expensive DVDs.

  I had a good experience with TDK DVD-R discs. In most cases, the burning procedure could be completed successfully
  But I had some problems with the other DVD writing.

  I think the whole issue is compatibility between the laser lens and DVD-surface and that's why I recommend you several DVDs from different manufacturers.

  Goodbye & good luck

• File placed in Mac server with read/write access to all the world, but when a Windows machine changes and saves the file, it becomes read-only

  Original title: Excel file permissions

  At my work, all except 2 computers are Macs. I'm one of the only Windows machines. I created an Excel file which I want everyone at the office to access and modify. We have put on the Mac server and changed the permissions for everyone to read and write. I also had that done on the Windows machine before placing it on the server. However, people on Mac machines can open, change it and save it without problem. But if one of the machines Windows opens, modifies and saves, it restores the Mac machines to read-only. Anyone know how to fix this?

  Hi amber,

  Please contact the Microsoft Community.

  I would have you post here for further assistance.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Let us know if you have any other problem with Windows in the future.

• How can I let Adobe know I only have 1 computer with the program and have not exceeded my license?

  I had to replace my laptop computer and charged with 12 elements Adobe on my new laptop computer.  When I enter my valid serial number for adobe, it indicates that I have exceeded the number of permitted uses.  I had a breakdown of computer on me a couple of times and of the charge on the same computer, then I finally replaced it with my new laptop.  I loaded it on a single computer only, and need to know how to contact Adobe to get this resolved.

  L. Ball

  The problem isn't the only computer, the problem is that you need to reinstall without first turning off

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• Running a server of Freelancer with Windows XP and have problems with updates

  I run a server for a game called freelancer who has been released by Microsoft in 2003. My problem is that, in recent years, when I tried to get the server working after doing a clean install of WinXP Pro and get the updates, the server hanging and not start working properly. After several installations with various combinations of what has been installed after the OS, I finally got the server works, but get this: the server runs only on Windows XP with NO updates. WHY?

  I have a theory that I can't prove it on WinXP... When Freelancer was released in 2003, XP was new and she has no security features there now, and I think that one or more of the mess of updates with the server of DirectPlay 8 which is integral to the operation of the server. Of you Eggheads Microsoft must know what I mean... I don't know enough on XP to do more to make a guess, and it's my guess...

  Thank you for allowing me to escape,
  Tanamir

  Hello

  DirectPlay has been moved to support engineering and is an obsolete API. This was done mainly because of security problems and the fact that most of the features of DirectPlay is no longer relevant. TCP/IP is the ubiquitous network protocol and support for the head-to-head modem, serial port,

  NetBIOS, IPX and other suppliers is no longer relevant. Native API for TCP/IP in Windows is WinSock, and the usefulness of the library is so limited.

  There are technologies in Windows XP SP 2 or later version that provide server under protocols of discovery to manage the features of lobbying (P2P and PNRP), and many third-party solutions exist for matching. Future Microsoft technologies for this will be based on WinSock and not of DirectPlay.

  Support in future versions of the operating system will be determined primarily by the problem of application compatibility and will continue to be available through the Platform SDK for those supporting legacy streaming of DirectPlay applications.

  For reference: error messages when you try to connect to the game multiplayer matchmaking: http://support.microsoft.com/kb/829151/en-us

• Sony Vaio did not come with recovery cd and have not been able to locate the online game

  I have a Sony Vaio, which has a few years working with Windows XP Home Edition.  When I bought the computer first, I wasn't very experienced technilogically who did not think about twice the computer comes not not with an operating system cd.  In any case, now that the computer is a few years old I am aware of the importance of having this cd as a backup, if all else fails.  My problem is when I went on the Sony website where a list of retailers has been provided which might carry the recovery CD.  After phone calls and emails, I have yet to find one that still bears then Sony Vaio Recovery Set.  I always have my genuine key of Windows Xp, as well as of the receipt of the purchase of the computer.  I'm more concerned with a new installation or not all original came with my computer (ie. sony) programs.  My concern is just to find a real cd that I can use in the unfortunate situation where I have to reinstall my operating system.  Any help would be greatly appreciated.  Thank you for your time.

  Maybe you have a recovery partition.

  Pressing F10 or F11 key when you turn on your system can put you in a recovery partition.

  TaurArian [MVP] 2005-2011 - Update Services

• I agree with Adobe CC and have Photoshop CC but I can't move beyond Lightroom 5.7.1 how to get the CC version I pay for?

  I have Lr5.7.1 and Ps CC. I pay the subscription but you are unable to download Lr CC. Where should I go for help with this?

  Hello Yorkshire,

  Please download and install Creative cloud first from the following link: https://creative.adobe.com/products/creative-cloud

  A times downloaded, please login with your Adobe ID and password, and then download and install Lightroom and Photoshop CC on your computer.

  Kind regards

  Tanuj

• I want to use a custom button photoshop with my composition and have the substitution effect

  I'm trying to put a button in photoshop in a blank publication widget trigger. When I cut an paste the image into the trigger, he loses his robot and switches are no longer the colors during the reversal. It works very well in the composition of the lightbox, but the problem with lightbox composition, is there no working capital options to display click only target. How to work around this problem. I want to have my own custom button with the effect of composition within the cc muse.

  You should check the design layout and defined States for relaxation, if the State is set correctly then it should show the rollover State, but the container target corresponding to the relaxation is on the page, then it could show you the active State not the rollover State.

  Thank you

  Sanjit

• I have a hp dv6 and tries to activate wlan to go online with my ps3. and have no idea how activate the wlan

  I ran persistent wireless tracing in administrater and a few other ways but getting no where...

  Hello

  I suggest you follow the steps that can help you solve your problem below:

  (a) click the Start button.

  (b) type services.msc in the search box and press on enter.

  (c) search for autoconfiguration WLAN Service and check if it set to Automatic & not automatic delayed.

  I would also check if there are keys to activate WLAN.

  You can also uninstall the drivers for WLAN and restart to load the genric drivers and see if it works well or not.

• Where support (with read/write access) files should be placed on the computer target?

  I am building a LabVIEW application that will be distributed to more than one PC. I have I need to read and write in a configuration file. I need a file location that I can reach on the vast majority of computers that run Windows XP and VISTA. VISTA seems to restrict the ability of an application to create and write files to the folder program files. Where is the best place to store this file? Any suggestions will be greatly appreciated. Thanks, Dave F

  Microsoft recommends that the exact locations of a registry keys to store information for different purposes.

  These are the rules that we use in the company and they also works in VISTA and Windows 7.

  Do not click on links. Small is an excerpt from our online help and I din't had a method to convert them to plain text without having to rewrite them.

  LabVIEW and the Windows registry store information where these files are located in the file system.