Entities does not Contribution - very basic question

Hi guys,.

My apologies for this very basic question: I am very new to Hyperion, with just one week of training! Anyway, I'm building a basic model and have noticed that my features are not in the dimension value roll altogether the [Contribution]. This means that entities do not roll upwards!

It was suggested that problem was that I needed a Sub consolidate in the rules, but I put the attribute 'ConsolidationRules' = n. In the documentation it is defined as "N to use the consolidation by default and eliminations".

I was wondering is there anything else that is needed to use default groups, or do I need to create rules?

Thank you
G

Why do you think that's not driving? If your building rules are set to "n" you don't need rules.

Make sure that your presentation was made to IsConsoldiate. Make sure that you're displaying a "Parent.Child" to total Contribution.

Tags: Business Intelligence

Similar Questions

  • Portege M600 - ConfigFree does not work very well

    Pls help friends...

    I've used it before very well with ConfigFee.
    Once I changed the profile, the LAN and wireless IP change correctly.
    I m on WinXP SP2. I just reinstalled Windows and ConfigFree does not work very well.

    I have LAN IP and wireless in this profile.
    I have the problem when I change the profile, I received the error message for the wireless IP does not change (the question did not pass.) TCP/IP configuration

    The following may be responsible for the failure. Wireless LAN Utility is active (Please close the utility). Network Properties window is open (Please close the window). The Internet options window is open (Please close the options window). I use PROSet to control the wireless.

    I tried the solution proposed and even reboot my laptop, but there s no chance...
    Can help you pls?

    First of all, you can use a single tool to configure WLan.
    You cannot use Windows WLan configuration option, the Intel ProSet utility and ConfigFree at the same time.

    Second, I put t understand why you use ConfigFree to Wlan configuration.
    In case you, I advise to use the Intel ProSet tool or clean Windows WLan settings.

    In addition, I put t understand why you change the LAN and Wlan profiles?
    In all profiles of your Wlan IP address must be set to automatic as the WLan router automatically assigns the IP address.

    But like I said above; only one WLan configuration tool can be used!

  • My OS windows 7 does not work very well, can not install or uninstall programs

    My OS windows 7 does not work very well. Cannot install or uninstall programs. A week back ilivid software got installed, guess this particular software has caused the problem. Cannot run the task with the option in the control panel. I don't want to format my system since there are a lot of personal data. Instead of looking for any option of repair for BONE. Would appreciate if you can let me know the best way for recovery.

    My OS windows 7 does not work very well. Cannot install or uninstall programs. A week back ilivid software got installed, guess this particular software has caused the problem. Cannot run the task with the option in the control panel. I don't want to format my system since there are a lot of personal data. Instead of looking for any option of repair for BONE. Would appreciate if you can let me know the best way for recovery.

    Hello

    I would recommend to restore the system to a date before the problematic software installation / before the start of the question - Windows system restore 7

    Kind regards

    Patrick

  • Satellite L500-126-CD/DVD drive does not open very well unrolled

    Hello

    I just got my second Satellite L500-126.
    I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.

    Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it.
    Is this normal?

    Also, when I close the dvd player, I hear a little noise "ping!"
    Like a spring, or something. Is that also normal?

    Thanks in advance.

    Hello

    I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway).
    This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
    Still, you will hear a short click Open and close the drive.

    So I guess it's ok.

  • What if it does not reset your security questions

    What should I do if I don't know my security and issues whenever I press on check threw email nothing happens

    You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.


    (141895)

  • Very basic question I think?

    Hi im very new to flash, but I'm looking to learn more about it, I tried to use the pre-built Flash components and I was just wondering where and how you can retrieve the values in the boxes checked

    I know how to check using the 1 box

    If (instancename.value = true) {}
    trace ("box has been checked");
    }

    but I want to run through a series of 5 boxes and retrieve all the labels in a first time, I can probably work on verification, if they are checked, but all the I get filament is not set which, I guess, no value.

    This is the code I used to try to recover all the labels of each box at the press of a button

    We (Release)
    {
    trace ("clicked");
    var i = 1;

    While (I < 5) {}
    trace ("Running while");
    i ++ ;
    trace ( check box. Label);
    trace (i);


    }

    }

    It would be more appreciated if someone could point me in the right direction for tutorials very basic on the flash components that I could find only the macromedia livedocs that I have not found a lot of help as his technique to speak which I am not yet familiar with...

    Thank you Pinky

    Hmm, I hate these sensitive submit buttons when they take too long to process your response if you click it again and it deals twice so it seems you spamming the forums: S lol

  • Change of subject does not work with basic authentication or client-cert

    Hello

    Following the [change authenticated users role after the LDAP authentication | http://forums.oracle.com/forums/thread.jspa?messageID=3590712] thread, I have successfully done a simple testcase web application.
    It works with forms authentication from, but if I change the method of "basic" or "client-cert", it does not work.
    It seems that the subject is reset on each request, lose roles added programmatically.

    Could someone explain this behavior? How can I keep the information between applications? I need to use the client CERT authentication. based in my web application.

    Thanks in advance,

    Tatiana.

    Published by: Tatiana on August 4, 2009 12:51

    Hello

    What happens if you hurt the object in the session and use it from there?

    Frank

  • Very basic question :) in the forum

    :)

    I don't know her like a basic question, but struggling to get this straight all in detachment.
    I just wanted to know the steps to connect the text into a hyperlink when validating responses...

    If someone can solve the example: here_ "go-ahead" should be a hypertext link and the link should point to google.com

    See you soon,.
    Manik.

    Something like this:

    [url http://oracle.com] Oracle

    How to write on it?

    [url http://oracle.com]Oracle[/url]
    
  • Layout DW does not seem very WYSIWYG

    I'm learning CSS available to my new Web site instead of the old path of table. The problem is that everything I have on the screen in DW does not translate in the browser as in the same way. I also had the same problem with the table layout method.

    Is there a page size setting or resolution I missed who will give me a true likeness in DW that appears in my browser? I use FF, but the problem in IE too.

    For example, the login of the user box I'm writing looks a lot like DW, but when I run in the browser the input fields are pressed until the line below. To get things looking right in the browser, the screen DW version looks like its been in a road accident.

    Any useful advice on this would be greatly appreciated.

    Mark





    I use DW8 and see the same thing sometimes.

  • Very basic question: Flash Media Server vs embedding flash video

    I hope it's a quick easy question to answer:

    What is the difference between Flash Media Server or simply using a freeware Flash media player (like Flowplayer http://flowplayer.org/) that uses XML playlists to embed your Flash videos on a Web site?

    What are the benefits of Flash Media Server and how something like Flowplayer not issues that the FMS can?

    Thanks in advance!

    Erik

    In a word flowplayer offers the video through your web browser. It does so via the HTTP (port 80) and on any web server progressive download

    Progressive download concludes the video on the server and played through the player it is being downloaded. 2 important things to take this are 1, the video is downloaded to clients, at the end of reading's hard drive, they will have a copy of your video that they can do what they want and repost it somewhere else. 2, it plays as it downloads, which means that if I see a video of 10 minutes on your site and want to skip to the middle or the end I have to wait for the entire video to download before viewing these segments. Your host, incidentally you will love for progressive download because it will appear as if your transfer rates went through the roof. Once demand for the video made it has not returned back, the customer gets all if they watch it or not.

    Flash media server using rtmp Protocol. This Protocol is an open protocol socket through port 1935. Essentially, it's a two way street. When the user views a video using FMS get basically just enough video to keep the connection open and satisfy the buffer necessary to ensure a clean reading. Bytes of info that carry the video go only to the memory of the users, not the hard drive. This allows the user to come and go around the film without having to wait for all to download.

    Hope that helps.

  • Pix 515E, VERY basic question

    I just pulled the thing out of the box and he turned on.

    I put it on our internal network plugged a laptop inside interface and went through the Setup Wizard.

    I gave the external interface a static address, said pat for internal systems (just the laptop listed above), and all seemed well.

    He already seems to be an access rule that allows all outbound traffic, but I can see something beyond the inside interface (192.168.1.1) on the laptop.

    I ping around the world since the pix, but the poor internal system sees nothing.

    I am very new to Cisco and am sure I'm missing something basic.

    Anyone want to help our a beginner?

    Thank you!

    Hello

    You can watch the traffic on any interface by applying

    the folloving command

    capture (capture name) int (interface name)

    through the show (name of capture) capt command you

    See the packets captured on this interface

    Example: I want to watch the traffic on the inside of the interface

    In capture tony type mode interface privileged (#) inside the

    then see tony snapshot

    In this case, you should see incoming ICMP echo packets to the laptop. (I don't think they come, I guess you don't have the road to the 192.168.0.0 network (or just default to 192.168.1.1 - and only road!) in your laptop). Try the road print on laptop computer command to check.

    ICMP commands in your configuration are not ACL commands, they control only ICMP join the PIX

    interfaces, no ICMP by PIX.

    So I don't think that you can successfully ping

    192.168.0.111 ICMP echo packets, but should leave

    the PIX outside interface and the response to the ICMP echo

    192.168.0.111 packets would be arrested to that

    return ping interface. This could be seen in

    PIX log (see the logg). You must start logging in configuration by

    conf t

    LOGG on

    LOGG buff 7

    You can also apply the capture on the external interface.

    To get the return of packages 192.168.0.111 ping, you must apply a list of access on the external interface of the PIX. As written in the previous post.

    HTH

    Zdenek

  • Thunderbird does not work - very disappointed

    I got to play a sound when I receive e-mail in my regular Inbox. It does sometimes, but most of the time it isn't. I just need to check from time to time to see if there is any new mail it. I can't respond to mail important timely for this reason.

    Second, it ALSO randomly plays the new mail sound when mail is received in my trash. I use filters to direct messages from low priority to the trash. I don't want to know what mail goes, this is the folder I want to check from time to time and do not informed of mail is received it.

    These two issues are completely random.

    I think it is (or is supposed to) when messages arrive in your Inbox.

    Given that your filter is on the Inbox and moves the messages selected in the trash, these newly arrived messages have already triggered the new mail indicator.

    I don't like noisy computers and my speakers are almost always muted, so I do not use this module myself, but the add-on ToneQuilla offers the possibility to play specific sounds depend on filtering. This might be able to give you a silent moves to the basket and could improve the success rate of play wanted noises.

    What platform do you use i.e. Windows, OSX or Linux? Linux in particular seems reluctant to make noises on the mail either.

  • The food is just out on my Power Mac G5 2 .3GHz so it does not start. My question is, if I pick up another opportunity G5 2 .3GHz and install the HDD of my G5 will be a new start up as usual.

    The power just went out on my Power Mac G5 2 .3GHz and will no longer start up. My question is this. If I pick up another opportunity G5 2 .3GHz and install the hard drive of my computer it starts as usual? I just need to get the files on my computer.

    J.

    Yes, if the disk was not damaged.

  • read png: transparency does not work very well

    IM programatically loading PNG images and put them in a picture box. However, I see big differences when I programmatically load a picture or just drag it to the front of windwos Explorer; See attached picture.

    I can change the loaded PNG transparency, but making very high makes the alias bad image; doesn't look like not smooth. When its low there white edges.

    Are their other options?

    The left is loaded programmatically, the right is moved from windows Explorer; identical image.

    I have attached the original png too

    Felix

    You can try the code I posted here:

    http://forums.NI.com/T5/LabVIEW/how-to-get-Alpha-images-on-picture-box/m-p/1138513#M501588

    The boxes are designed to test the mixture.

  • Want M4 - dies of the battery during heavy program use, nearly does not or very slowly thereafter

    What happened:

    On my laptop HP Envy M4-1015dx, I just changed a large image file in Photoshop, probably using a large amount of the work disk. In the background, I had another Adobe program running even though I had not committed the application within a few hours before. Google Chrome web browser was also opened in the background, with a lot of tabs open. Thus, the load on the processor of the computer /? was really heavy.

    At this point, the battery died and the computer turns off later. I plugged to a power source shortly after and you press the power button to turn on the laptop. The laptop starts and went to the Welcome screen, I entered my password and the laptop is stuck on the 'Welcome' screen that loads before opening on the desktop.

    I pressed the power button to turn off the laptop and again to turn it on. At this point, everything loaded very slowly. Screen where to enter the password moved extremely slow, taking at least 5-10 minutes to accept my activation key and begin to load the desktop.

    Using any other application did not work, they became unresponsive. Tent a restore of the system took more than 30 minutes just to set a restore point and 'prepare' the computer for a restoration of the system. I could never complete a restore, I got an error during the process of preparation.

    I can't help myself to try and fix the problem? It seems that the processor is just overloaded with even the smallest tasks now. Thank you for your help.

    Your HARD drive is dead looks

Maybe you are looking for

  • Update of 12.4. Not all music albums appear in "Albums".

    12.4 must be the worst update ever. Everything was fine until I updated. Among other silly changes, not all my music albums now appear in "Albums". Some appear in both "recently added" and "Albums", some only appear in one or the other. I don't care

  • Press the scrolling issues after a clean install of 7.

    I recently installed 7 with a cloth from disk on my Pavilion dv4.  After a successful installation, the only thing I see that does not work is the scroll on my touch pad feature.  I need to find a new driver for 7?

  • my basket

    trash on the desktop shows that there is something in there.  When I open it its empty.  I tried to empty anyway, and he said, are you sure you want to remove windows...? I find it a little scary. What should I do?

  • Don't see Blackberry point in the new project in VS2008

    Hello Here are a few of my machine: OS: WinXP Sp2 VS2008 9.0.21022.8 RTM I install vs_plugin.31.exe and BlackBerry Widget SDK Beta 3. MSI. But there is no element of Blackberry in the section of the new project. I watch the video and see that they cr

  • Sony VGP-BMS30 mouse does not connect with the computer via bluetooth

    Hello I can't get my laptop Windows 8 to find the Sony mouse!  I checked and all the settings are correct. Blue tooth is on and wifi etc...  Packing instructions mouse Sony are for Windows XP.  What is the problem?  It is not compatible with windows