entry level for storytelling

Similar Questions

• Recommendations for entry level FC SAN

  Currently have a NFS datastore.  Looking to add a FC SAN as primary storage and use the NAS for backups and secondary storage.

  The installer includes 3 x servers HP DL380 hosts.  Recommendations for an entry-level SAN FC?  Want a unit that enables the direct connection of the 3 hosts through 8 GB FC.  Require only 12 max motorization and would use only 8 disks to start.  Budget will be 20 k $ or less for cables, discs, 3 FC HBAS and SAN.

  Thoughts?

  Thank you

  Messages like these generally attract a series of 'recommendations' of suppliers, so be wary.

  If your environment is all the HP, it is usually meaningful in a perspective of care to assess without HP.

• The one you suggest an entry-level range for 4i ESX4 & ESX Server

  Hi all

  I am looking for an entry-level HP or ACER server for

  ESX 4 installation please advice. I am confused with HCL

  Post edited by: RDellimmagine to improve formatting

  DL160G6, DL160seG6, DL170hG6, DL180G6 DL320G6 (Proc Intel X 5500)

  Concerning

  Michael Haverbeck

  If you find this information useful, please give points to "correct" or "useful".

• How can I exclude a level for the table of contents, but this amount as a bookmark?

  I know how to exclude a level for the table of contents (or rather include only levels I want to be included) and also how to create bookmarks from the table of contents entries, but how can I exclude a level for the table of contents, but always include it as a bookmark?

  Make 2 toc styles. One for the entries in the Bookmarks panel, you can generate a table of contents on the side of any page, and you must score in its definition to create bookmarks and other things that you use to build the table of contents for the visible part of your document to print. This should have unchecked the option create a bookmark in its definition.

• General question: what is involved with a DBA position entry level?

  Hello
  
  I hope I've put this in the right forum. I was hoping to get feedback by those in or near the field to get a better understanding of the responsibilities and requirements for entry level DBA work. (What is a "I need a job", I did not).
  
  I don't know there is a wide range of difference depending on who you work for. So, I guess I should post a more specific question, if any feedback is greatly appreciated. I don't need to know it is to meet the education requirements, I have that down.
  
  Number of questions:
  -With an "entry level" position, commonly how one should be in SQL and PL/SQL?
  -Would you spend more time working on isolated tasks, or management of database encompassing all the?
  -One would spend time to work in other languages?
  -Would one spend a lot of time on the architecture and design of DB?
  -Other than the server (and associated material general network) is there any other material can be expected to work with?
  -"Beginners" would require a vast maintenance, troubleshooting, and hours of coding?
  -In general, is "entry level" a post of Assistant?
  and finally
  There's anything like that, you wouldn't expect not as a requirement, but is often in the field. Such functions often passed down that one would not expect, or additional skills that would be expected not to in general.
  
  Thanks in advance for any comments. Feel free to include comments not mentioned in this post. I must add that I have a solid knowledge of google, but I'm hoping to get previews experienced (at all levels).
  
  Thank you

  Is pretty much answered your questions

  It depends on.

  It depends on what you know already - master (or at least become quite good at) before entering the DBA work.
  It depends on how your store is set up.
  It depends on what is needed at the moment.
  It depends on if the shop you can (has a place for you) with your skill set.

  There is no standard for what makes a DBA. Not really. No s/n, at least no that last a very long time, never turns down a task because it is not DBA job to do. Therefore, the best DBA (very useful) are quite versatile in what they know and what they do.

• Google maps do not appear right, the game is good, but about half of it is said ' we're sorry, but we have no maps at this zoom level for this region. " Zoom does not help.

  When you display a Google map, I get about four vertical bands which alternately display well and gray stripes. The gray area shows the message "we're sorry, but we have no maps at this zoom level for this region." Zoom does not get rid of the grey areas.

  I had this problem for over a year and work around it using MS Internet Explorer or Google Chrome which works Ok. Otherwise, Firefox works great and I use it for everything except Google Maps.

  I tried an uninstall of FireFox and then reinstall, but it did not help. I don't remember what I was doing when this problem is first presented.

  Looks like you have blocked images from http://mt1.google.com/

  See the problems that cause to not show images

  It is possible that you clicked on 'Block Images' from the context menu in an attempt to save an image.
  See web content, pop-ups, fonts and language settings

  • A way to see what images are blocked is to click on the favicon (Site ID icon) on the left side of the address bar.
  • Click on the "More information" button opens the Security tab of the "Page Info" window (also accessible via "tools > Page Info").
  • The Media of the "Page Info" window tab.
  • Select the first image and scroll though the list with the arrow pointing downwards.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• What is the level for Qosmio X 500 SATA - 10U?

  Hello

  I think to do a SSD to accelerate the time to start on my Qosmio X 500 - 10U.

  Anyone know the SATA level for this machine?
  How can I find out this information?

  I can't find any information in the manual or specification. If the motherboard is not enough fast then the SSD will not help much.

  > Anyone know the SATA level for this machine?
  > How can I find out this information?

  That's easy, you can get details of material using a diagnostic of freeware software.
  For example, SiSoft SANDRA or Everest Home Edition (Lite)

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Another entry point for the issue of the application

  Hello

  As I read on this KB about to enter another application

  http://supportforums.BlackBerry.com/T5/Java-development/set-up-an-alternate-entry-point-for-an-appli...

  But on the KB above, the main application is UiApplication and other entry point is not UiApplication!

  1. I wonder how to create the entry point alternative in which the two project is UiApplication

  2. for example, I have the application main who have 3 screens A, B, C. When user clicks on the icon for the main Application screens A. When the user clicks on the application of alternative entry point (another icon on the home screen), B screen. I wonder how we can do?

  Thank you.

  No, you create only one project. the ASP is set to the application descriptor.

• another entry point for the application

  Hello

  I want to create another entry point for my application... After going through various messages earlier I went to know that we can do this by selecting

  Project--> Application tab-->

  But, in a project Type tab I have only 3 options i.e. CLDC, Midlet, library and another entry for this point is turned off by default, one of my existing project into the current workspace is automatically selected it... I want to put there another project to another entry point...

  I also tried to download the image, but not due to an error downloading...

  Thanks a lot for your help.

  Have you checked this article?

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/796557/800738/800901/...

• Is planning - possible to break out a report at a particular level (for example. Level 5) limited by a Member

  Hello

  
  I'm breaking the books of report for the entity dimension. There are a total of 7 levels within our hierarchy of entities.

  
  Is it possible to break out at all levels of 5 out of the 7, but limited to a particular entity, so that the batch report is not burst at all the level 5 within the hierarchy of entities together?

  
  The common way to burst at a given level is by selecting the tab "Lists" when the preview to view window. However, this option in the list allows you to select the level for the entire dimension (in my case, entity). I would select level 5 (our level 7) to the [ABC] entity only.

  Does anyone know how to do this? Any help would be much appreciated!

  Thank you very much!
  Tiffany

  Thanks for your comments. I tried, but it does not work. It does not recognize the logic.

  I got did, however, find a way to do by exporting the file list batch-burst, put on day of individual members on the CSV file in a breakthrough down Smart View file copying-sticky and import again. It's a great work around what I'm trying to do.

  Thank you

  Tiffany

• I got recently leveled for Windows 10.  When I try to open windows 8 I get an error 1.

  I got recently leveled for Windows 10.  When I try to open windows 8 I get an error 1.

  Bud Walker wrote:

  I got recently leveled for Windows 10.  When I try to open windows 8 I get an error 1.

  A quick search on google for "Windows 10 1' error returned this Microsoft article:"

  Windows Update 1 error code

• I am currently creative Member Cloud using the Plan of photography (paid annually).  I would like to take advantage of the upgrade promotion to the full level for $29.99.  Can I take advantage of the promo before it expires may 29?

  I am currently creative Member Cloud using the Plan of photography (paid annually).  I would like to take advantage of the upgrade promotion to the full level for $29.99.  Can I take advantage of the promo before it expires may 29?

  Contact Adobe Support by chat or phone to see what can be done...

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  Phone support | Orders, returns, exchanges

  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

• Entries double for Windows XP machine virtual library

  Recently, I noticed that I have an entry duplicated for my Windows XP VM display in the Virtual Machine library. I have been looking for a solution to this but have not found all the recent conversations about it.

  I've attached a screenshot of what appears in the Library dialog.

  Any thoughts would be greatly appreciated.

  I had not had my first cup of coffee, during the validation of the previous answer, so I just took a quick look at the information in the bundle of support to ensure that the directions I gave would have no negative impact (even though they shouldn't) however I was very curious when first looking at the screen shot if it was indeed the same Virtual Machine.  Now having coffee, it appears that, at the same time, the Windows XP Home Edition Virtual Machine Package lies in your Home folder when he was appointed while tiny "drichter" compared to what it is now, mixed bargain "DRichter."  This information has been withheld in the "/ Users/DRichter/Library/Application Support/VMware Fusion/vmInventory ' non-shared file that lists the Virtual Machine shown in the Virtual Machine library.  Not that I really think that is worth wasting too much time partly however without some additional information I would guess you migrated from a previous Mac and that was the cause, or you change the case of your username on the same system at a given time.  Anyway, the most important thing is arrested has been restored to the universe, oops I meant restored to the library of the Virtual Machine.