entry of SolidWorks for Labview

Similar Questions

• Entry value change when he went from teststand for labview.

  Hi all

  I try to spend my labview VI value hexadecimal teststand. When I run the VI independently giving the value as 00000010 I get the expected results of the VI.  But even when value is passed through local variable teststand, when it reached VI of entry it was conerted to 000000 A 0 and so I'm getting wrong output.

  I am not able to understand how the value goes to the value of the input parameter when she went from teststand for labview.

  Any ideas?

  I discovered the error.  I was entering the value in the wrong format in teststand... instead of 0 x 10 I've entered only 010 and was therefore is converted to A.

• Support for LabVIEW 2016

  Can someone tell me what VirtualBench drivers will be available for LabVIEW 2016?

  Release date is... right now! NOR-VirtualBench 16.0, with the help of LabVIEW 2016, is available here:

  • Driver 16.0.0 and NOR-VirtualBench Application

  (My apologies for yesterday, does not but it takes a little while to download pages to go live.)

• Support of NOR-DNET for LabVIEW 2013

  We currently use OR DNET 1.6.6 with LabVIEW 2011. I installed LabVIEW 2013 now also on my computer and tried to synchronize all of the drivers with my installation of LabVIEW 2011.

  Well, it seems that NEITHER-DNET does not support LabVIEW 2013, at least officially. compatibility of Version of LabVIEW and NOR-DNET indicates that NEITHER-DNET 1.6.6 supports 2011 NOR-DNET 1.6.7 2012 LabVIEW and LabVIEW.

  The list NOR system driver November 2013 set OR DNET 1.6.7 defined pilot. When I try to install it, there is no support for LabVIEW 2013.

  My question is, if there is a plan to include support OR DNET for LabVIEW 2013 or later in the game to pilot?

  I copied the directories vi.lib\DeviceNet and vi.lib\nidnet of LabVIEW 2011-2013 and I can load my programs without any problems. I always did not build an executable and does not run on the test set-up, but projects can be loaded in LabVIEW 2013 without any screws of brocken. should I expect any problems running LabVIEW 2013 with the NOR-DNET to 1.6.6 and 1.6.7 driver?

  Nick

  There should not be problems but it is a former pilot, we will not be updated for the future version of labview.

• Is there a Module NXT for LabVIEW 2010

  Is there a Module NXT for LabVIEW 2010?  If not, are there plans to bring a available and if so, when?

  Hello

  I found a link to a download for the module 2010 here.

  I hope this helps.

• How to convert the file with VI for LabView .lib to CVI?

  Hello

  I have the .lib file for my lock in the amplifier. The lib file is written for labView and already contains a visual interface (like ActiveX). The point is that I need this file for programming in CVI (8.5). How can I convert a LabView ICB .lib?

  Thank you.

  Denis.

  You said that you had a .lib file and in fact you have an llb file. There is a huge difference between an "i" (eye) and a 'l' (ell).

  There is a LabVIEW Instrument Driver Export Wizard but it's only for new pilots of project lifestyle and you need LabVIEW. There is no other way to convert a LabVIEW driver to a driver of the CVI. If the LabVIEW driver uses methods and properties of the ActiveX, you will need to write the same thing in CVI.

• What type of support for labview usb protocols?

  Hello guys I want to connect a device to your pc via a usb port and I want to use labview to analyze the data.

  But first of all, I would like to know what usb protocols support for labview.

  USB, USB CDC and other TMC?

  I ve read labview recognizes a raw device to the usb, but what is? Is it VI to read and send data, or I have to do? If these VI exists, they do the handshake? flow control?

  Thank you.

  Please read the chips and have a look at the USB specification (it is linked to in the nuggets).

  TMC, CDC, MAss Storage are all built on the basic USB protocols.

  LabVIEW has no built-in support for one of these classes of devices except Test and measurement.

  Shane

• Download assessment for labview .vi editor 64-bit?

  I am trying to download .vi lead editor for LabView. I'm using windows 7, 64 - bit os. I installed LabView 8.6 run-time engine. So please can anyone suggest where I need to download the LabView evaluation Editor.

  You can downbload an evaluation version of LabVIEW from here.

  For future questions, please refer to the LabVIEW forum: this forum is dedicated to LabWindows/CVI

• 1208fs for labview 10 usb connection problems

  Hello
  I'm relatively new to Labview and just improved labview 10. I used 6.1 before and had no problems using my mcc Board of 1208fs USB to run experiences before. I tried to connect even to labview 10 on my new computer, and the only thing that will connect to the instacal is. Ive plugged throu instacal, but is not visible in the list of I/O that selects the channel to use. Any help would be appreciated.

  Thank you!
  Andrew

  By the way, my os is windows xp

  Andrew,

  MCC daq devices have a different set of drivers for LabVIEW 8.2.1 LV versions and newer.  See http://www.mccdaq.com/daq-software/universal-library-extensions-lv.aspx this is ULx.

  I have one of the devices USB-1208 and discovered very recently this issue when I wanted to use it in a LV 8.5 application I wrote.  The new driver is actually nicer and DAQmx drivers a little resembles the way you use them.  While the former pilots of the Universal Library for older versions of LabVIEW looked like using traditional DAQ hardware drivers of OR.

• Mcc usb 1208FS for labview 10.0 connection problems

  I have version 10.0 of Labview installed on windows XP computer. I want to connect MCC USB 1208FS for Labview. Not able to see the device MCC in device of measurement and Automation Explorer interface. It appears? Please let me know the steps to access the device of the MCC in Labview.

  I can see the MCC card detected in the software InstalCal of MCC supported. I installed the latest version of the CMC the CMC site software.

  As far as I know, you will not be able to see physical computer as in MAX.

  From the file of help from MAX: "Measurement & Automation explore (MAX) allows to access your National
  Instruments of devices and systems. "that is material MCC is not a feature of National Instruments.

  Why not stick with the InstaCal software and the MCC screws provided?

  Ian

• Report Generation toolkit for labview 2010

  H all.

  I'm looking to download the 2010 labview report generation tool. When I proceed to download the Toolkit on the site of the national instrumnets, it says that I need LabVIEW 2011 or later in order to install it.

  Is there a version of this for labview report generation 2010 toollkit and can anyone provide a link maybe?

  Thanks for reading.

  Try this: [link removed, can be found on ni.com/downloads OR software downloads, the LabVIEW Report Generation Toolkit 2010 is available to customers with program Service Standard here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other clients can communicate directly with NOR]

• NOR-DAQmx 9.2.2 for 6251 USB works for labview 8.2?

  Driver download OR-DAQmx 9.2.2 USB 6251 work for labview 8.2?

  Thanks in advance

  NOR-DAQmx 9.1.1 was the last version to officially support LabVIEW 8.2

  NIquist: I'm a student as to why this KB seems to have disappeared in the air.  I can see inside, but not outside.  I'll update the post you linked when I tell me what's wrong.

• 2651 a conversion of TSP Script for LabVIEW

  Hello

  I have a problem on the conversion of all TSP scripts that contain functions and appeal for the end loops. I'm new to the TSP with models of trigger scripts. I used the Script Builder (TSB) Test tool and am able to run any TSP and generate raw data, but I don't seem able to convert most of the codes in the command of LabVIEW VISA or loader LV TSP TSP and run it to generate data... I can't find any tutorial or examples how to do it.

  Let's say that... Use the example of KE2651A_Fast_ADC_Usage.tsp (pulse) and I'll just focus on the portion of function CapturePulseV (pulseWidth, pulseLimit, pulseLevel, numPulses). I have seen a few examples of LV that says loadscript myscript and close on endscript.  I did a lot of different approaches, and I kept getting errors in particular the print function that I am not able to generate data through LV by to read the data in the buffer to inside the instrument. Some approaches, I have had no errors but no data... Some approaches, I got error-285.

  The part of the code TSP pulse that works in TSB is here (I'm not including loadscript and endscript) and what is the RIGHT way to modify the code for LabVIEW and run it and obtain data? Thank you:

  function CapturePulseV(pulseLevel, pulseWidth, pulseLimit, numPulses)
      if (numPulses == nil) then numPulses = 1 end
  
      -- Configure the SMU
      reset()
      smua.reset()
      smua.source.func            = smua.OUTPUT_DCVOLTS
      smua.sense                  = smua.SENSE_REMOTE
      smua.source.rangev          = pulseLevel
      smua.source.levelv          = 0     -- The bias level
      smua.source.limiti          = 5     -- The DC Limit
      smua.measure.autozero       = smua.AUTOZERO_ONCE
  
      -- Use a measure range that is as large as the biggest
      -- possible pulse
      smua.measure.rangei         = pulseLimit
      smua.measure.rangev         = pulseLevel
  
      -- Select the fast ADC for measurements
      smua.measure.adc            = smua.ADC_FAST
  
      -- Set the time between measurements.  1us is the smallest
      smua.measure.interval       = 1e-6
  
      -- Set the measure count to be 1.25 times the width of the pulse
      -- to ensure we capture the entire pulse plus falling edge.
      smua.measure.count          =
                      (pulseWidth / smua.measure.interval) * 1.25
  
      -- Prepare the reading buffers
      smua.nvbuffer1.clear()
      smua.nvbuffer1.collecttimestamps    = 1
      smua.nvbuffer1.collectsourcevalues  = 0
      smua.nvbuffer2.clear()
      smua.nvbuffer2.collecttimestamps    = 1
      smua.nvbuffer2.collectsourcevalues  = 0
      -- Can't use source values with async measurements
  
      -- Configure the Pulsed Sweep setup
      -----------------------------------
      -- Timer 1 controls the pulse period
      trigger.timer[1].count          = numPulses - 1
      -- -- 1% Duty Cycle
      trigger.timer[1].delay          = pulseWidth / 0.01
      trigger.timer[1].passthrough    = true
      trigger.timer[1].stimulus       = smua.trigger.ARMED_EVENT_ID
  
      -- Timer 2 controls the pulse width
      trigger.timer[2].count          = 1
      trigger.timer[2].delay          = pulseWidth - 3e-6
      trigger.timer[2].passthrough    = false
      trigger.timer[2].stimulus       =
                  smua.trigger.SOURCE_COMPLETE_EVENT_ID
  
      -- Configure SMU Trigger Model for Sweep/Pulse Output
      -----------------------------------------------------
      -- Pulses will all be the same level so set start and stop to
      -- the same value and the number of points in the sweep to 2
      smua.trigger.source.linearv(pulseLevel, pulseLevel, 2)
      smua.trigger.source.limiti      = pulseLimit
      smua.trigger.measure.action     = smua.ASYNC
      -- We want to start the measurements before the source action takes
      -- place so we must configure the ADC to operate asynchronously of
      -- the rest of the SMU trigger model actions
  
      -- Measure I and V during the pulse
      smua.trigger.measure.iv(smua.nvbuffer1, smua.nvbuffer2)
  
      -- Return the output to the bias level at the end of the pulse/sweep
      smua.trigger.endpulse.action    = smua.SOURCE_IDLE
      smua.trigger.endsweep.action    = smua.SOURCE_IDLE
      smua.trigger.count              = numPulses
      smua.trigger.arm.stimulus       = 0
      smua.trigger.source.stimulus    = trigger.timer[1].EVENT_ID
      smua.trigger.measure.stimulus   = trigger.timer[1].EVENT_ID
      smua.trigger.endpulse.stimulus  = trigger.timer[2].EVENT_ID
      smua.trigger.source.action      = smua.ENABLE
  
      smua.source.output              = 1
      smua.trigger.initiate()
      waitcomplete()
      smua.source.output              = 0
  
      PrintPulseData()
  end
  
  function PrintPulseData()
      print("Timestamp\tVoltage\tCurrent")
      for i=1, smua.nvbuffer1.n do
          print(string.format("%g\t%g\t%g",
                              smua.nvbuffer1.timestamps[i],
                              smua.nvbuffer2[i],
                              smua.nvbuffer1[i]))
      end
  end
  

  I finally solved it myself! I first create support shell, according to the documents, but the problem was with functions of scripts but I solved by introducing VISA separate, feature writing and THEN retrieve the data from the instrument directly by VISA buffer read more. I did TSP_Function Script Loader that allows simply copy/paste codes teaspoon (any * .tsp) of: TSB program or incorporated into this type of function and loader.vi, name (parameters), defined by its own pasted script then it will generate RAW files directly in the array of strings that can be broken into pieces or restructured into what you want as for the graphics, etc..

  That's all I really need to do, I can do codes of tsp in LV and get the data off of it easily via the function defined. Now, this Loader.VI behaves in the same way that TSB keithley-made program I use.

  Here I add Loader.vi Script TSP_Function (in LV 2011 +).

• modulation toolkit for labview for embedded controller PXI-8106

  Hello

  I have an on-board controller: 8106 PXI OR PXI 5661 and 5671. He came with DAMA RFSG but not the Modulation Toolkit (TM). Now I cannot access some screws RF Toolkit as NI DAMA close.vi etc. I opened a code that uses this DAMA close.vi and since I donot have probably MT, I can't run since the claim code to choose the path!

  I checked for the TM in the start menu-> all programs-> national instruments-> modulation but in vain. Also, I opened MAX and under "Software", I could find DAA, pilots RFSG etc but not the Mt.

  When I checked online it says I have to buy the cd/dvd of MT. If I do, how I run on my controller?  What are my other options?

  PK

  Hello

  I think I solved the above problem. I had to install the RFSG and ACD for labVIEW. For some reason, the equipment was delivered to me with DAMA and RFSG, but only for C. This part was misleading because I saw on my National Instruments system but not the DAMA DAMA and RFSG vi. Also spectral measurement Toolkit (SMT) has not been installed. SMT is a MUST for the good functioning of the RF VSA. After you install the required drivers and tool boxes, I am able to run and use the VI completely.

  Thanks for your support Abhishek.

  PK

• Tablet cheap for labview?

  I'm looking for a tablet that can run in labVIEW. Y at - it tablets cheap compatible with labview?

  I know that microsoft pro 2 surface can run, but his expensive way.

  -Adam

  Hi Adamgot,

  Maybe you have already found a suitable Tablet? Otherwise, I recommend comparing the system requirements for LabVIEW with available Windows tablets. As I said in another post, there are som models available at ~ 400-500 USD.

  System requirements for NI LabVIEW development system and LabVIEW Modules

  http://www.NI.com/LabVIEW/requirements/

  Best regards