entry point not found in the library of syncnotifier.exe dynamic links, help please

Similar Questions

• the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  What is apsGetReady?     Do I need?   If yes how can I do?  If this is not the case, how can I remove the window error message.

  """""""""""""""""""""""""""""""""""""""""""'''

  Wzcsldr2.exe found entry point

  the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  """"""""""""""""""""""""""""""""""""""""""""""""

  Hello

  1. When you receive this error message?
  2. you did it before the issue of any material changes or software?
  3. what service pack and antivirus are installed on your system?
  4. What is the brand and model of the router you are using to connect to the Internet/network

  5 are you facing problems to connect to the Internet or to the network?

  6. are you using any third-party wireless / network in the System Manager software?

  Method 1:
  

  Step 1: Boot your system in 'Safe Mode with networking' and check if you get the same error message. Then review the article mentioned below to do so:
  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Please see Using D-Link, if you use D link router.
  http://www.Dlink.com/support/default.aspx

• hpqtra08.exe - Entry Point not found error. The Get procedure entry point Module F < [not found in KERNEL32.dll dynamic link library.

  Original title: hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  (This keeps popping up on my screen and I don't know how to get rid of it. Can you please tell me what to do?)

  Hello

  ·         When exactly do you get this error message?

  ·         Did you of recent changes to the computer before this problem?

  ·         You are able to boot to the desktop?

  You can follow these suggestions:

  Method 1:

  If the previous step fails, follow these steps:

  a. restart the computer in safe mode and disable the HP service and check if the problem occurs. Follow the steps described in the following steps:

  b. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  c. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  d. Click Start and run, type msconfig, and then click OK.

  e. the system dialog Configuration utility appears.

  f. click on the Services tab.

  g. Click to select the check box Services HP Digital Imaging Monitor or hpqtra08.exe.

  h. click OK.

  i. When you are prompted, click on restart to restart the computer.

  j. after reboot check if the problem occurs.

  Method 2:

  If the C:\Program Files, download and run the Microsoft of the link Security Scanner to make sure that your computer is not infected with the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• Savedump.exe - Entry Point not found

  Whenever I restart the system, I get the mentioned error message below;

  Savedump.exe - Entry Point not found

  The procedure entry point SymSetSymWithAddr64 could not be found in the dynamic library DBGHELP.dll

  Whenever I restart the system, I get the mentioned error message below;

  Savedump.exe - Entry Point not found

  The procedure entry point SymSetSymWithAddr64 could not be found in the dynamic library DBGHELP.dll

  First, click HERE and download DBGHELP.dll. Save the file to your desktop for convenience.  Click on start > run > paste the file path below into the box run > click ok.

  C:\Windows\System32

  Open the system32 folder. Minimize the folder to the system tray. Return to the file that you have downloaded and right click. Choose "copy". Now optimize the system32 folder. Right-click in the free space in the folder and choose Paste. If you are prompted to replace an existing copy click Yes. Restart the computer. The error should be gone.

  Note that the file download will expire after 3 days because I used the free version of filemail.com.

• Cannot open iTunes or other things. iTunes.exe - Entry Point not found error

  Original title: iTunes.exe - Entry Point not found

  iTunes.exe - Entry Point not found

  The procedure entry point
  AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey is not found in the AVFoundationCF.dll dynamic link library.

  I don't understand why that keeps popping up whenever I'm going to try and open iTunes. Then he told me that iTunes is not installed correctly, even after you uninstall it and install and it installed successfully. It is really starting to make me angry. I don't know what I did. I was working with my iPod Classic moms and it simply does not work so I tried hard so he can. I think I could have managed to get rid of something by accident. Can someone please help please?
   
   
  Discussions were merged.
  Deleted duplicate.
   

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• I received a message after you have signed in: ST Services.exe - Entry Point not found.

  The context of xmlxpathfree proceduce entry point not found in the dynamic link library Libxml2.dll.  After canceling the message, another message came: MSWindows - ST Service Scheduling has stopped working?  What that is this allusion and what can I do about it?

  This program is associated with Dell Datasafe and possibly other Dell programs pre-installed on their computer. If you don't use a Dell Datasafe, you can try to uninstall it.

  There is a some evidence that this problem is caused by some registry cleaners and cleaning utilities.

• Cannot start OM Server Administrator (entry point not found)

  All of a sudden when I try to open the Dell server administrator, I get the following message:

  omastart.exe - Entry Point not found

  The procedure entry point xmlParseFile could not be located in the dynamic link library libxml2.dll.

  I can browse to the server administrator manually entering an address bar https://localhost:1311.

  I tried to install the latest version over the existing version with no luck.

  Any ideas?

  Thank you.

  If you don't want to waste his time with the new shortcuts or by setting the PATH variable, here's a possible solution:

  Access \shared\bin [Server Administrator installation folder].

  Copy the files in this folder to % windir%\system32.

  Brian

• dthtml.exe - Entry Point not found

  My 32 bit Vista installation has begun displaying the error message at startup:

  dthtml.exe - Entry Point not found

  "The entry procedure point not found _iob_func in the dynamic library MSVCR70.dll.

  I would be very grateful if someone knowledgeable could advise me on how to deal with this issue.

  Thank you very much

  johndoc37

  Hi johndoc37,

  I will need some additional information to help you best.

  ؠ exactly when you get this error message?

  ؠ all changes made on your computer recently?

  In the meantime, follow the instructions below that may help you resolve the issue.

  Method 1:

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Method 2:

  This problem is possibly due to Virus infection.

  Perform a virus online scan that might help you resolve the issue.

  Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC.

  • Check and remove viruses
  • Get rid of junk on your hard disk
  • Improve the performance of your PC

  Click on the link below for Online Virus scanner.

  http://safety.live.com/

  Check whether the problem is resolved.

  You can go to Microsoft Security Essentials protect your computer from malware.

  Click on the link below for more information on Microsoft Security Essentials.

  http://www.Microsoft.com/security_essentials/

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Assassins Creed 4 black flag: AC4BFSP.exe Entry Point not found

  When I tried to launch AC4 for the first time in a few months, I got this error:

  AC4BFSP.exe - Entry Point not found

  The procedure entry uplay_r1 pint. UPLAY_ACH_EarnAchievement could not be located in the dynamic link library uplay_r1_loader.dll.

  Is there a fix, if so, what is it?

  Hi Matt,

  When I launched AC4 first time I also had a similar error, but I have a solution for it.

  Follow the procedure below

  (1) download the configuration files for AC4:-orbit_api & steam_api

  (2) also to download these files .dll for AC4:-steam_api.dll, uplay_r1.dll & uplay_r1_loader.dll

  (3) replace all files in the directory of the game AC4.

  (4) and the cheers, you're ready to play.

  and if the game does not start also follow the procedure below

  (1) disable your antivirus real-time Windows Defender for a short time

  (2) follow the three steps (i.e. the download of these files & their replacement in the directory) previous

  (3) to start the game

  (4) if the game starts correctly activate your protection virus in time real windows defender.

  as AC4 begins, so I can't give you any solution.

• MovieMaker.EXE Entry Point not found

  On several computers, during the upgrade to Windows Live 2010 to 2011, I get an error after the upgrade when you try to use Windows Live Movie Maker 2011.

  The error is:

  MovieMaker.exe - Entry Point not found

  The procedure entry point? Initialize@base@YGXXZ is not found in the library of dynamic links WLXPhotoBase.dll.

  Under Win7 Service Pack 0 or 1, tried to uninstall all windows live and reinstall results in failure of the installation for just the Director.

  Any ideas?

  Hi KThurston,

  When you use Windows Live Movie Maker and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowsmoviemakers.NET/forums/

• LR6 - Entry Point not found - AgTransitCargo_pushTransitCargo - AgKernel.dll

  Hello

  I want to install Lightroom 6 en trial version.

  I disabled Antivirus and firewall, the installation goes well.

  At the time of the launch, a message error appears:

  Entry point not found

  The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the dynamic link AgKernel.dll bibliothequede

  I'm looking for since the time of the United Nations without finding solution

  Hi, Frank, P

  May I ask what operating system you are using (Windows / Mac)?

  You can also check out this link, since it is related to the issue that you are facing Get this message when I try to run Lightroom. "The point procedure entry AgTransitCargo_pushTransitCargo be found in the AgKernel.dll dynamic link library"

  Kind regards

  Sahil

• the entry point producer d3dperf_setmarker is not found in the library d3d9.dll dynamics.

  All my games do not work

  When I double click on fifa 09, he said that the producer entry point not found d3dperf_setmarker in the library d3d9.dll dynamics.

  can someone tell me how to solve this problem

  Hello

  Please check if you are able to play this game in a spare user account

  -Cleanboot Windows to isolate 3rd party interference

  -Check if there is an update/patch for the game

  -System Restore to a date and time when the game worked successfully

  -Open the control panel and try to repair the application

  Uninstall/reinstall the game

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

  ---------------------------
  Wzcsldr2.exe - Entry Point not found
  ---------------------------
  The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
  ---------------------------
  Ok
  ---------------------------

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.

  Fact that sound familiar and you have something like this installed?

  If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it.  You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.

  They also have an active Support Forum where you can post your problem/question to see if people there can help you get there.  There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.

  I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly?  Did you update or reinstall your device from D-Link or drivers, lately?

• .exe error] is not found the procedure entry point AddAtomW Entry Point not found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I have

  Original title: [ProgramName] .exe Entry Point not found

  I get this message: the point procedure entry AddAtomW could not be found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I don't know what to do. Help please!

  Hello

  1. did you of recent changes on the computer?

  Method 1:
   
  It is possible that some third-party programs installed on the computer is causing the problem.
  I suggest that you put the computer in a clean boot state and check if it helps.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  See the link below to learn more about how to clean boot.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  (a) click Start, type msconfig in the search box and press ENTER.
  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
  (c) under the general tab, click the Normal startup option, and then click OK.
  (d) when you are prompted to restart the computer, click on restart.

  Method 2:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.