Entry text box does not work properly when repeating the Quiz

Similar Questions

• My sistem 5.1 audio does not work properly when I connect to the internet

  Hello!

  I just bought a Genuis 5005 5.1 audio sistem and I have a problem with him: it will not work properly when I get on the internet (the center speaker does not work).

  I also bought an Asus Xonar DG 5.1 soundcard which works perfectly. I installed and also installed the driver for it.

  When I play music/videos to my hard drive, all speakers work fine, but when I enter the internet videos/Music Center speaker does not work...

  I hope someone can tell me how to solve this problem... Thank you

  Later edit: I managed to solve the problem by selecting the "2 channel" option in my sound card driver.

  I managed to make it work with my audio driver 2-channel. Thank you for your time :)

• points or note text box does not work

  I implemented the point marker that I have in other games and it does not move for some reason any. I find the score and it's perfect, so it's my code trying to get the this.score.score_txt.text = String (this.pointsI); registration failed

  SerializableAttribute public class ClickMain extends Sprite
  {
  private var assetsPath:String = ' library/food.swf ";
  private var definitionsArray:Array;
  private var bubbles: Array;
  last bubble that sound has been played
  private var currentBubble:Bubble;
  private var currentIndexArray:int;
  private var pointsI:int;
  private var pb100:Pb100 = new Pb100();

  private void Usepoints (): void
  {
  this.pointsI = this.pointsI + 10;
  This.score.score_txt. Text = String (this.pointsI);
  
  pb100.x = currentBubble.x;
  PB100.y = currentBubble.y;
  addChild (pb100);
  }

  that does not show anything useful.

  But if you draw the text property of a textfield and he reveals what you expect, but you don't see anything in the textfield, allow the border of the textfield object to make sure that you can see your textfield.  If you can't, embed your fonts.  If this does not work, check the color of your font.

• Reset timer does not work properly.  Find the timer just always return null...?

  I'm trying to get the meter backwards and the Clear_Form when the timer expires. I'm trying to reset the timer when you move the mouse or type text in all fields (for those who use the tab keys to navigate through the page).
  
  I tried procedures for 'Create' and 'Remove' the timer, and it did not work.
  
  I tried the Set_timer integrated to 'reset' the timer instead of create and delete timers, and it didn't work either.
  
  
  
  I'm building a requests for a customer to enter their personal information at a kiosk in the lobby of the waiting room, before an appointment with a representative, which will save all your meeting time. The timer will be to erase the personal information when a client leaves just during the process.
  
  The timer keeps always just pulled over and over again, and I can't it stop/reset/create new timer when the mouse is moving etc... so he keeps almost touching news over and over again, which is not the desired effect.
  
  
  Could someone help me please? It seems like it should be a pretty basic function to the program, but I'm not find all messages about my question. I use Oracle 9i and 10g of form.

  Hello

  You do not have any code, so that it is difficult to guess what can be the problem. Remember that the timer name must be given capital letters in functions.

  François

• A STANDARD XML TAG DOES NOT WORK PROPERLY WHEN USED IN RTF FILE FOR XML RE

  Hello
  
  I am using the following tag:
  <? If: TASK_STATUS = "Open"? > < xdofo:ctx xsl: attribute = 'block' name 'color' = > red < / xsl: attribute >
  <? end if? >
  to change the color of foreground text which, according to some conditiosi, need to print in
  PDF format using xml and rtf files reports.
  But I was able to get only 3 colors (red, blue, green) to use, other colors such as orange, cyan etc are not
  work.
  Please let me know what all the colors are supported by oracle in printing to PDF using xml reports.
  Indicate if we do a few things related to parameters or so.
  
  I'm usning 5.6.3 XML version.
  
  Kind regards
  Amar

  Colors can be expressed by a known name and a hexadecimal value. The hexadecimal format is widely used in HTML programming and has a format of #abcdef, and "abcdef" may be as aaddcc values and so on. For some primary colors, you can get away with #abc, but this is not very common.

  You should always design with colors Web safe in mind. That limited to 16, but should be much thinner (more all 16 have known names like red, cyan, yellow, etc.).

  http://www.w3schools.com/HTML/html_colors.ASP has a good explanation of the standards.

• VI does not work properly when run at each full speed or highlight the run mode, but running at full speed after the starting and stopping of the execution mode games

  Start labview, so fix that will probably teach me a lot. Looked and saw a lot of posts of things only work in games of the run mode, but nothing like this. I have attached the relevant real-time and FPGA VI.

  The code is supposed to read a motor encoder. When ran regularly, it works somehow. It will update the counter of how sporadic all few seconds a fraction of a second. When ran in climax run mode, it appears really up-to-date. After that matches the execution mode is canceled, it works perfectly. Can someone find out what could be the problem?

  Ended up staring at me. I am sure that the problem was that if there is only one element in the FIFO when it checks first, it eliminates the two elements when the FIFO filled.

  Fixed it by adding a test for the number of items before and reading only if there are enough items to read. Attached file sets for reference.

  I have still no idea why he was running after delivery to highlight in the first place. We will never know. Bonus points for the answer = P

• Equium M40X does not work properly after upgrading the BIOS

  OK, well... I'm not a computer scientist, but I have a bit of trouble on my hands and I don't know where to go for the right help, so I came here.

  Today I started my lappy to confront an illuminous Green Office... not all it is green just of great spots here and there. Happened to me before, but it disappears after about 15 minutes, but today his guarded it usually hours and is still as he.

  I looked everywhere on the net for a possible fix but nothing helped, even though I've heard somewhere that an update of the BIOS might do the trick, so natually, I did... I came here and searched for my Equium M40X, found, downloaded and installed the latest version...

  but now I have a screen with a resolution of half of what it should be, it went from 1200 x 800 or something like that... to 1024 x 786 and I always get the green screen problem... the program toshiba provided for the update of the BIOS does a backup file (BIOS. (BAK)...

  I can't restore the old BIOS would set the screen resolution, but I'm just helpless as to how I go about it. I find the file, but I have no way to open/run it

  I've had this laptop for about 2 years now, I know probably just getting old and a bit tempermental, but if theres no way you people out there can help, I would much apreciate it :)

  Thanks a bunch - Ash

  Hello

  I Don t think the biosupdate is the reason for the reduced screen. It does not sound like a software thing, but rather a hardware malfunction.

  Is your normal screen during startup? If so, I'd say just remove your existing display drivers and install the new. But if it s like you described then it must be a hardware problem and the machine should be checked by a technician or at least a service partner.

  Would be better if your bring your machine to an ASP for a checkup of material.
  If you need assistance to find the ASP closest, try this link (the ASP index):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome and good luck

• Text wrapping does not work despite having "Ignores the text to the line" unchecked?

  Hi all

  I have a weird problem of InDesign CS5.5. If I create a framework and enter text as usual, when the text reaches the end of the frame it layers itself during the first part of the text? I imported the paragraph styles that I previously created and used without problem of thousands of times in the current document. I tried to start a new standard paragraph style, and it does exactly the same thing. I've looked everywhere and you can't find the information on wrap around an object that is not a problem for me! The clock is against me in a big way, so would appreciate any help you can give me - I'm sure it's something simple?

  Of course, that looks like attack the value 0.

• computer does not work properly on startup, the screen is blank

  have any programs that run at startup, just a black (white)

  have any programs that run at startup, just a black (blank) screen and a cursor. also no taskbar

  A question = a Thread in a Forum to avoid confusion.

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/24e46b8e-E111-407E-898c-b0d288850964

  Answer in another Thread:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• After that the computer is idle for a few minutes, you receive an error message. "Vtdispl display driver does not work properly, please restart the computer to solve the problem."

  I rebooted and turned power off the computer several times and always get the same message. The size of the text on the screen and the icons are larger than the way in which they should appear. How can I solve this problem?

  Consult the manufacturer of your so great PC OEM, for example Dell / HP or laptop and install the latest drivers.
  If a visit generic PC your graphics card maker or manufacturer of the motherboard and install drivers lates
  Do NOT get the drivers of MSUpdate

• MOZILLA does not work properly - what's the problem?

  I signed up to check the last question, I asked, and he brought a lot of gibberish? WHAT IN THE WORLD IS WRONG?

  I signed up again, and now it works correctly.

• my laptop pointer freezes sometimes and does not work properly

  I have a sony vaio notebook. This pointer does not work properly most of the time, and it freezes. I have to restart my computer to fix it temporarily, but it happens again and again. I wonder if my system is infected with a virus or not. can fix this or I need to recover my laptop. I look forward to your reply. Thanks indeed

  Try to go to the sony web site and get the last mouse and mouse pad drivers.

  If an external mouse, clean and check the batteries if applicable.

  If this isn't an external mouse, try an external mouse and see if the problem persists.

  Then...

  If you use Microsoft Security Essentials, start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected. Options vary by region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/) in the USA at this time. After an initial free consultation, will be charged a fee for assistance, based on the details of the case.

  If this is not the case, go to your provider AV.

  You can also try this web site - http://www.bleepingcomputer.com - contains details for most common infections, often immediately after that they started to appear in the wild, and instructions are provided for how to remove infections using their malware removal guides. They also have forums where you can seek assistance from people who specialize in the removal of malware.

  Here are other free programs that can help:

  Malwarebytes anti-malware free - http://www.malwarebytes.org/products/malwarebytes_free Please note, do not accept the trial version of MBAM Pro that it will conflict with MSE while the free version won't.

  SUPERAntiSpyware Free - http://www.superantispyware.com/downloadfile.html?productid=superantispywarefree

  TDSSKiller (free) - http://support.kaspersky.com/faq/?qid=208283363

  HitmanPro (free for 30 days) - http://www.surfright.nl/en/hitmanpro

• My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Someone help me please find a solution

  My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Help

  A deal with this * day. Only thing that worked was plugging it into the computer, it supported up to the computer. Do you have a reset, and when that went to spend he asked me to do an update "carrier". If you're on verizon? My co worker and I have the two are facing it today

• Suddenly, IncrediMail does not work properly. When you click on an email that internet Explorer tried to open

  Original title: corruption of the probably the key ".htm" registry is damaged or missing

  Suddenly, IncrediMail does not work properly.  I click on the message and get nowhere.  It seems that it is trying to go to IE and can not find the web page.  I searched everywhere on the internet and saw where others had the same problem, but I can't find the fix.  One person suggested it be referred to Microsoft as a "failed to open local html file with IE' problem."  I guess maybe that's a problem with the registry, but do not know how to fix it.

  I can not even do a system restore or reinstall the IncrediMail program.

  For assistance please ask for help in the IncrediMail Forum

  IncrediMail Support Portal:
  http://www.IncrediMail.com/English/help/choose-your-version.aspx

  Directly in contact with the IncrediMail support team, click here

  Cordially,

• ATI Graphics Driver does not work properly

  All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
  I have checked all the updates of Windows, said that I installed all available updates. Help, please!

  Hello

  First manually check the updated drivers with ATI and ask their support and Forums on all known
  questions. Use the methods to update the following drivers.

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ============================================================================

  Other troubleshooting methods would include the boot minimum and others who might help determine
  the cause and eliminate problems.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.