Entry value change when he went from teststand for labview.

Hi all

I try to spend my labview VI value hexadecimal teststand. When I run the VI independently giving the value as 00000010 I get the expected results of the VI.  But even when value is passed through local variable teststand, when it reached VI of entry it was conerted to 000000 A 0 and so I'm getting wrong output.

I am not able to understand how the value goes to the value of the input parameter when she went from teststand for labview.

Any ideas?

I discovered the error.  I was entering the value in the wrong format in teststand... instead of 0 x 10 I've entered only 010 and was therefore is converted to A.

Tags: NI Software

Similar Questions

  • I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

    I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

    Check the liquid Indcator of Contact.

    Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

    Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

  • I went from Windows7 for Windows8 and lost my internet connection wireless

    When I upgraded to Win7 for Win8, I can no longer connect to wireless internet.  The network I was logged on Win7 is always displayed.  I can't get to the part where I type in a security code for the network.  I went through all shooters wrong and still cannot connect wirelessly.

    Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • Qty. field value change when running in the generator

    Hello


    I have this query for a report of receipt store
                   SELECT 
                    ROWNUM   SRNO
    ,     RVT.RECEIPT_NUM           SRV_NO
    ,     RVT.SUPPLIER                SUPPLIER
    ,     RVT.TRANSACTION_DATE          SRV_DATE
    ,     RVT.PO_HEADER_ID           SRV_PO_HEADER_ID
    ,     RVT.PO_LINE_ID                SRV_PO_LINE_ID
    ,     RVT.ITEM_ID               ITEM_ID
    ,     RVT.ORGANIZATION_ID          ORGANIZATION_ID
    ,     RVT.ORDER_NUM               ORDER_NUM
    ,     RVT.ORDER_LINE               ORDER_LINE
    ,     RVT.CURRENCY_CONVERSION_RATE     CURRENCY_CONVERSION_RATE
    ,     INV.SEGMENT1               ITEM_NO
    ,     INV.SEGMENT2                PART_NO
    ,     RVT.ITEM_DESC                ITEM_DESCRIPTION
    ,(select sum(mot.on_hand)  from mtl_onhand_total_mwb_v mot where  INV.INVENTORY_ITEM_ID = MOT.INVENTORY_ITEM_ID
                                      --  AND     INV.ORGANIZATION_ID=MOT.ORGANIZATION_ID
                                                 and loc.inventory_location_id = mot.locator_id
                                          AND loc.organization_id =mot.organization_id
                                                   and RVT.LOCATOR_ID = mot.locator_id     )onhand,
         RVT.TRANSACT_UOM           UOM
    ,     RVT.TRANSACT_QTY           QTY
    ,    rvt.SUPPLIER_ID,
       RVT.SUBINVENTORY,
       LOC.SEGMENT1,
    RVT.TRANSACTION_TYPE
    FROM 
         RCV_VRC_TXS_V           RVT
    ,     MTL_SYSTEM_ITEMS_B      INV
    ,     MTL_ITEM_LOCATIONS  LOC
    
    WHERE 
         INV.INVENTORY_ITEM_ID(+) = RVT.ITEM_ID
    
    AND     INV.ORGANIZATION_ID= 103
    AND      RVT.TRANSACTION_TYPE = 'DELIVER' AND RVT.INSPECTION_STATUS_CODE <> 'REJECTED'
    AND      RVT.RECEIPT_NUM = :P_RECEIPT_NUM
    AND      RVT.ORGANIZATION_ID = :P_ORG_ID
    AND RVT.LOCATOR_ID = LOC.PHYSICAL_LOCATION_ID(+)
    AND TRANSACTION_ID NOT IN (SELECT PARENT_TRANSACTION_ID FROM RCV_VRC_TXS_V RVTD
                                WHERE RVT.ITEM_ID=RVTD.ITEM_ID
                                AND RVTD.TRANSACTION_TYPE IN ('RETURN TO RECEIVING','RETURN TO VENDOR'))
    here in data model the quantity field appears as QTY1, why is this
    When I runtheapplicationinthebackground this query in Toad the quantity value is 335.06
    but when I run in Report Builder value is 335,1

    I see no rounding upward of calc
    for the same

    kindly help me

    Ok. then property set to 999999.99 format mask
    It shows its value. and changed the name of the column is not a big problem.

    PS

  • loss of audio when I went from 9-pin hdmi

    I have my flat screen that my monitor, with the stereo as my audio. using a single pin from the PC to the audio L R on the back of the car radio. When I changed HDMI I no longer get sound through the stereo. I changed and configured everything in the menu realtalk. even tried pullin the sound of the tv to the stereo...

    Take a look at this link http://en.kioskea.net/forum/affich-110196-no-sound-on-lcd-tv-desktop-hdmi-connection

    and this http://en.kioskea.net/forum/affich-50668-no-sound-on-tv-through-laptop . Follow the advice given in these 2 links.

    All the best.

    Die you a hero or you live long enough to become a villain... Black Knight

  • the format of my document changes when I convert from a txt to PDF file, how to keep the original format of the document?

    How to maintain a txt document format when converting to PDF?  the pdf file continues to change the lines on the page

    txt is not a format. Really. It's just text, and so there is no right way to do it. I guess you need to do is to put in Word and from there, you can choose the font, size, page margins, and the difficulty of the layout; then, you can create a PDF file. Despite this, expect the changes to line break.

  • Why a State in MSO on a Page returns to the 1st State when she went from Portrait to landscape mode...

    My folio is Portrait and landscape and many of my pages have the MSO, and when I go back and forth between the layouts on my phone, the page returns to the State 1st in this MSO.

    Another major problem is that it takes 3-5 seconds to go from Portrait to landscape and vice versa.

    Folio is 25 version.

    I created all the pages in portrait first and then created a different layout (landscape).

    Any ideas?

    Thank you

    Make sure your portrait and landscape MSO have exactly the same name. InDesign changes the name of the ASM by adding a number when you make a copy of the WHO for a different layout. It will not solve the problem of return to the first State.

    Not sure on issues of speed, maybe tablet related?

    Good luck.

    JvR

  • RGB color values change when I create a PDF file in Indesign

    Hi I have a night Mare, please please please help me.

    I design a lot of websites in Indesign, export to PDF and then slice and dice the pdf in Pshop, while coding I'm going.

    I just upgraded to CS5 and seem to have a nightmare when I export my drawings in PDF format. When I open the PDF file in Acrobat or Pshop RGB color values are always different from what they were in Indesign (only subtly). I tried all the options and settings I can think when I make a PDF, but still the color values are different in the final PDF file.

    Why this keep happening, this settings, I have set before you make the PDF to ensure my RGB color values remain the same.

    I use Acrobat 7 Professional.

    Do not include the profiles. You have a problem of current color management (workspaces probably not synchronized). If there is no profile, the opeing application will ask what it is or take the current work profile, which is what you want, if the numbers must be preserved.

  • Lightroom and Photoshop has stopped working when I went from Lightroom5 to LightroomCC.

    I get an error of missing dll (MSVCR110).

    Inline image 1

    How can I solve this problem.

    Hi Jeffrey, please try the steps mentioned in the link below.

    Error: "msvcp110.dll missing file.

    Please share the results after following the steps.

    -Atul Saini

  • Police will not change when you choose to search for a font

    Hello. I'm on a MBP with InDesign CC.

    I opened a document that uses Frutiger 57 condensed. The original file used the same font, but the name of different fonts, e.g. "Frutiger 57Cond.

    I thought that the problem would be in one of the styles, since there is no character styles, I went to paragraph and changed styles police for Frutiger 57 condensed from the Frutiger 57Cond, but that did not help. Frutiger 57 condensed is installed on my system, that's why I made this change.

    Under find fonts Frutiger 57 condensed is selected, but when I click on the first series of text that uses it, it will not change the police. If I choose all the changes, nothing happens.

    I tried to copy and paste everything into a new document and preflight gave me the green light, but when I have opened the folder, I got 61 errors yet. I thought I'd try!

    When I open a new document and start typing in this font, everything seems fine. There are several InDesign documents that use this font that also do not have the problem.

    No idea as to why this particular document send me questions of police? Please let me know if there is something I can check

    Looks like you have some fonts in a folder of fonts in the document.

  • When you change an item type only display in hidden element its value changes from any value in value null. Why?


    Dear reading

    When to change a display one item type in the hidden element its value changes from null value any value . Why?

    I would like to use the result of the query in the hidden item, as well as to display it in report footer.

    shortly the displayed element can read footer bu area hidden point cannot be viewved in the footer box. Why?

    footer

    & P11_DISPLAY_ONLY_ITEM.

    footer

    & P11_HIDDEN_ITEM.  )

    (site of apex.oracle.com Application Express 4.2.5.00.08)

    concerning

    Enformatik wrote:

    in the part of the properties point setting its source type as query retune unique value;

    but when you set its value to the calculation (before header) it works correctly.

    It is the expected behavior. The values defined in the properties of the Source element / by default are only put in the controls of the page displayed in the browser, not in session state. To refer to a session-state item value (as in a & P11_HIDDEN_ITEM. substitution of static text) then the value must be set in session state in a calculation or process that runs before the substitution reference is returned.

    Setting the value using a calculation is the right way to do it.

  • I edited a photo in Lightroom 5 and when I exported the completed picture, she went from a 1.3 MB to a 542KB file.  Everything I read says it is fine and I don't lose any resolution - but I wanted to ask the community.  Thoughts?

    I edited a photo in Lightroom 5 and when I exported the completed picture, she went from a 1.3 MB to a 542KB file.  Everything I read says it is fine and I don't lose any resolution - but I wanted to ask the community.  Thoughts?

    You may not have lost any resolution... or you can understand the word "resolution" bad

    Resolution isn't the file size, which are the numbers you are quoting. So the 1.3 MB changing to 542KB does not indicate a change in resolution. If you export the picture and let the box that says "Resize to Fit" disabled, so you don't waste no resolution at all, even if the file size has changed.

  • You cannot change the chart value axis when there are several types of graphics in a single diagram

    Illustrator can do graphics with bars and lines / columns, for example in the docs:

    http://help.adobe.com/en_US/illustrator/cs/using/images/gr_15.png

    http://help.Adobe.com/en_US/Illustrator/CS/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html

    However, when I create a chart like this, I seem to lose the ability to manually set the y-axis using 'override calculated values.

    To reproduce this problem:

    1. Create a chart as in the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers as well as the lines align perfectly - have a go until just less than 20, a up to a little less than 250, therefore it do not markers and the number of divisions on each side.
    2. Try to make the markers and numbers of divisions to the height, so in fact, the side that is going up 20 going up to 25 and has the same number of divisions on the other side.

    Everything I have tried does not work:

    • If I select the entire chart and go to the "Chart Type", I can not set the options for the value axis. In earlier versions, it's gray, in CS6 I can access, but clicking on 'OK' does nothing.
    • If I select the entire chart and chose the type of a chart, I can set options for the axis value, but that the selected chart type, and then applies the entire table.
    • If I use the direct Selection tool to select one of the series and open the "Chart Type" options, changing the options of the y-axis has no effect
    • If I use the direct Selection tool to select all series that share an axis and open the "Chart Type" options, changing the options of the y-axis always has no effect
    • If I use the direct Selection tool to select the Group of ticks axis itself, or the axis line and groups of ticks axis themselves, of axis labels, axis and graduations of the axis line, or axis labels, axis line, graduations of the axis and series of related data, etc., by changing the options of the axis also has no effect

    It seems that this feature is broken and it seems that the example in the manual has been carefully chosen to use a rare combination of numbers where it would actually look right.

    I thought about it. Like everything to do with the horrible ancient neglected graphic Illustrator tool, it is ridiculously clumsy and involves the caution around what is shamefully bad programming for a professional expensive product.

    It is timing - to do things in a sequence of rigid counterintuitive that seems not to work then meets at the end:

    1. Create the chart but, for now, keep all the same chart type. If you've already set to have different graphics types, put the same thing for now.
    2. Select the entire chart and in the main window of Chart Types, set the value to "Both sides" axis
    3. In the drop-down menu, there should be a left and right axis (or top and bottom...). Set the parameters of the value axis for these now. It will look like it does for a single axis, because it will not change the other axis - naked with her...
    4. Select the data series you want to use the other axis using group selection. Go to graph Type and the value of the y-axis to the other and set the chart type that you want. All of a sudden all be put in place.
    5. If you need to change the settings for the value axis, select the entire chart, set the whole chart type to a chart, change the appropriate value axis by choosing it from the menu drop down and the re - apply types of graph as above.

    (the bug is - it should not necessary to set the graphic object to only have only one chart of type in order to access the axis options of value for two different y-axis)

  • Value change event, be it be programmed to trigger only when the USER changes the value?

    The structure I set up is the following, I have a control in which the user chooses a value when they choose this value, the value change event takes place setting in the device. Then I am bed in unit values and display them in this control via a property node.

    My problem is that whenever I read back a new value in the control, he takes this as a value change event and resets the value within the system, is it possible to make this event don't move when the user changes the value?

    Yes!

    My thoughts are that you use a Value property (signalling) node to display for the control. That will trigger another call to event.

    Use the NO signs of property value node or a local variable.

    Your postal code, if this isn't the case, then we can help you understand what is happening.

  • This morning, I tried to send a transfer from one bank to the other, and when I went to check my e-mail in Outlook Express, I could not connect.

    This a.m.. I tried to send a bank transfer to another (I made successfully before). When I went to check my e-mail, I couldn't geet in. The message kep asking me my nasme user and the password. My password has been verified to be remembered. the screen was connection on server smtphm.sympatico.ca pophm.sympatico.ca.  How can I get into a program to change the news?  Properties to log in to show my email and password. I don't know hat is good. How can I reset it. It has been implemented years ago and this is the first time I had a problem.

    original title: problem outlook express

    Outlook Express keeps to request your password
    http://www.dougknox.com/XP/Tips/xp_oe_passwords.htm

    Save the password setting will no longer exist in Outlook or Outlook Express
    http://support.Microsoft.com/kb/290684

    Cannot save email password in Outlook Express 5
    http://support.Microsoft.com/?kbid=228713

    Save password check box is unavailable
    http://support.Microsoft.com/?kbid=137361

Maybe you are looking for

  • Can I fix Windows XP Home edition instead of reformatting hard drive?

    Hi there, my girlfriends A100 laptop has developed a fault where it gets loading up xp (xp with the blue loading bar loading screen) then back to the option screen giving options such as the safe mode with network, invites order and last known config

  • Trying to remove movies to mac/itunes/i don't know.

    Trying to remove movies to mac/itunes/i don't know. Im trying to get free space on my hard drive so I was removing the movies that I bought on iTunes. Ive tried to go the iTunes account > bought > by clicking on the top left corner x. Ive tried enter

  • Performance Y560 problem

    Hi all! I did deal with such a problem - when power adapter connected 3dMark 11 combined score 1231, when I test without ac adapter combined score is 532. It is very strange that Y560 is so dependent on electricity. Please help solve this problem.

  • DeskJet 2132: DeskJet 2132 impression

    With a DeskJet 2132, you can print from an ipad or an iphone without a computer?

  • Recovery will remove both my hard drives?

    The title says it all. I'm hoping to be able to reinstall vista on my Pavilion dv7-1170eo. Because it's what seems like two disks hard - one to drive D:, and then for C: and E: drive (reprise) - I was wondering if the factory settings recovery would