ENVY 100 D400: Unable to save the files scanned after Windows update 10.

After scanning the computer, I click on save button with one of two results. Sometimes nothing at all happens. Other times, the computer stops responding.

@Roy16

Probably, you need to delete the current program printer and install a new copy of the software full functionality.

HP ENVY 100 e - All - in - One Printer - D410a

Full software features:

File name: LSD410_1315 - 1.exe

Tags: HP Printers

Similar Questions

  • Unable to save the files to my device (Flash disk)

    Unable to save the files in my flash drive. It is given the message that it is complete, although it is not even half full. Furthermore, when I tried to eject, there will be a message that I have shuold close all files using even when there is none.

    Thank you

    First of all, I would like to make a backup of all the files somewhere safe. Just in case something goes wrong. I would like to make a copy of the files on the computer. Format the USB. Then copy the files over. If after a format, it still has the same problem or she leaves you nothing copy on then the memory stick may be dying on you and her is to buy another.

    Good luck

    Free Support Tools

  • Receive an error message on UID: uid without an owner for ImageFrame is unable to SAVE the FILE

    Receive an error message on UID: uid without an owner for ImageFrame is unable to SAVE the FILE

    Hello

    Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

    Concerning

    Vivek

  • Unable to save the files to the desktop, the error msg says I don't have permission to do this and to cantact admin but I m user having admin status.

    IN WINDOWS 7, cannot save the files to the desktop, the error msg says I don't have permission to do this and to cantact admin but I m user having admin status. ALL SUGGESTED SOLUTUTION? THE FILE in question is created with ms word 2007. I can record on other places lik e in drive D: etc.

    I could open your Explorer of files and go to C:\Users\Vanbee (or any folder of your user name), then right click on the folder on the desktop it there and go to properties.  On the Security tab, make sure that you have a full control on the folder.

  • Unable to save the file in a specific location

    I created a C:\Users\Projects\Writing projects folder to save my writing projects in. I tried to put a Word file in this folder and I was told that I don't have administrator rights to save a file in this location. I must have administrator rights, because it is my PC, and I have only set up an account with which I set install programs, remove any software, create folders, etc etc, so what happens? He told me that I could save the file under 'my documents '. I don't want to post here, because a load of other detritus accumulates in this folder, and these are files of project specific I want to keep separate (I'm a writer).

    Hmmm, I just did exactly that on my computer with Word 2007 and Home Premium from Windows 7 64 and had no problem at all.  If you have the professional version or complete edition, you can run in a part of the increased security, maybe.  You can still create these folders as subfolders of the My Documents folder and isolate what you put there like that.  Another thing you could try would be to create a LIBRARY that points to the C:\Users\Projects\Writing project that you created.  This might be more likely to succeed.

    One thing I just noticed that is not in your post is your user ID.  You create these records in C:\Users\yourID\Projects\Writing projects.  That's what I was doing.

    Good luck.

  • Satellite L500 - system hung on the splash screen after Windows update

    Hello

    I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

    Thank you
    Denise

    Hello

    > hung on the blue startup screen after it has restarted after a windows update
    This means that you get a blue screen after Windows update and more, you can start Windows t?

    You can start Windows in safe mode?

  • Unable to save the files on the desktop computer.

    After a restoration of the system, I am unable to save files on the desktop. Also, when I run that h & R Block software from my office, I get the following error

    "No permission to write to the directory. (see WinFileWriterImpl:open())

    No idea how I can fix this problem?

    Thanks in advance

    Why do you run the system restore?
    You had a problem before with saving files?

    You can save files to a folder on C:\?
    There are errors in the event viewer?

    Note

    To open Event Viewer: click on the Start button. In the search box, type and then event viewer from the list of results, double-click Event Viewer.

    Search in the application or system event logs and red error report.

    Thank you

    Marilyn

  • Unable to save the file in PSD - PS says that the file is over 2 GB when it's not

    I have a PSD that I worked on for many months. This week I got a new computer. When I open this file on my new computer, I'm unable to save as a PSD. The size of the file, in Windows Explorer, is 600 MB. Depending on the size of the PS CC Document displayed at the bottom of the Document window, the size of the document is 288.4 M / 1.77 G. Yet, when I try to save this file on my new computer, I get this error:

    Could not save it as "filename.psd" because the document is larger than 2 gigabytes.
    See Help topic "backup files" for more information.

    I do not understand how I worked on this document for several months and never had a problem with recording it, even now, on my new computer, it is impossible to save. My new computer has a secondary SSD hard drive that I use as the primary scratch disk. The new computer also has more RAM and a processor more. I had copied all my files from the old computer to the new preferences, and I do not see all of the settings are different between the two computers. Can someone please provide some guidance?

    (Note: I've been running PS CC x 32 because the x 64 version is not stable on my computer.)


    Size of the file as that displayed in the Windows Explorer: 600 941 KB.

    NEW: Document size such that displayed in the Document window: 288,4 M / 1.77 G
    OLD: Paper size such as displayed in the Document window: 288,4 M / 1.77 G

    NEW: Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12 / 11:23:00:00) x 32
    OLD: Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09 / 23:23:00:00) x 32

    NEW: operating system: Windows 7 64-bit
    OLD: Operating System: Windows 7 64-bit

    NEW: Version: 6.1 Service Pack 1
    OLD: Version: 6.1 Service Pack 1


    NEW: Physical processor count: 4
    OLD: Number of physical processor: 8

    NEW: The number of logical processors: 8

    NEW: Processor speed: 3591 MHz
    OLD: Processor speed: 2394 MHz

    NEW: Built-in memory: 32694 MB
    OLD: Built-in memory: 30718 MB

    NEW: Free memory: 25810 MB
    OLD: Free memory: 25633 MB

    NEW: Memory available to Photoshop: 3255 MB
    OLD: Memory available to Photoshop: 3255 MB

    NEW: The memory used by Photoshop: 60%
    OLD: The memory used by Photoshop: 69%

    NEW: Image tile size: 128K
    OLD: Image tile size: 128K

    NEW: Image cache levels: 6
    OLD: Image cache levels: 6

    NEW: Scratch or volumes:
    C:\, 930.2 G, 686,5 free G
    B:\, 111.8 G, 103.6 G free
    OLD: Scratch or volumes:
    C:\, 930.7 G, 567,1 free G

    Hello

    To ensure the follow-up to future readers who find this post, indeed it was a 14.2 bug fix which fell from Mindy file.

    14.1.2 and older versions of Photoshop, it was possible to save a document in PSD format which would not properly push the limit of 2 GB of formats (vector data stuck with the Max compatibility). We had a report of someone who inadvertently produced 300 + GB of files (http://forums.adobe.com/message/5666971#5666971). With 14.2, now make us some additional controls while recording and to issue warning limit file size. One of these controls is to the pixel dimensions of the data (the data of superior image then 30K pixels).

    Although MIndy file na not to exceed the 2 GB limit, it triggers the check of size of pixel data. There is a smart object layer that put across 6000%.

    So if you are getting 2 GB limit warning and didn't in previous versions, take a look at the scale of values on smart object layers and note the layers covering the area pixel values in the Info Panel and checking vector data (pasted from Illustrator guides).

    Kind regards

    Steve

  • Unable to save the files in Windows Movie Maker

    NEED HELP now Windows Movie Maker CRASHING! Project due tomorrow

    Help! It is 9: 40 EST and my video girls ' school project is due tomorrow, my WMM crashes when I try to "Save movie file" is only 6 minutes long and time continues to go up instead of down trying to save until he finally locomotives upward and I get the message that WMM has encountered a problem and needs to close. HELP HELP HELP I'll give you my email and cell # if it's faster

    Thank you very much, I got it fixed by unchecking a file in the tools/Compatibility tab that was causing the problem.

  • Error message "unable to save the file. ToR Adv.docx is not a valid short file name"

    I tried to save a Word file and received the above message. I had previously saved the file with hit of the same name. I tried with a different name, the same message. I deleted the original file, the same message.

    Word:

    http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

    Office newsgroups

    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

    Discussions of general issues of Word.

    They will help you with your question Word when repost you in the Office discussion groups above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Unable to save the files in the root directory of windows 7

    When I try to save a file in the directory root (c:\) on a Windows 7 PC I get a message saying "you have not ti permission to save in this location." Contact the administrator for permission.

    On this PC, I am a member of the Administrators group.

    Any suggestions on how I can gain read/write access to the directory root

    You can't because C:\ is considered a system folder. It is a question of UAC and is here on a daily basis - see here: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/permissions/1821b1b7-19ae-4e15-b414-dd63635e5f94

  • Unable to save the file in the site after upgrade

    Just upgraded to the new version of Muse.

    Open my site, tried to "save under" with a name change. Could not. Also not able to "Save".

    Have tried several times. Have now a few versions "recovered."

    When backups fail, I get:

    3128: Save as failed.

    [SPLErrorEventtype = "error" bubbles = false cancelable = false

    error = SQLError: ' error #3128: disk i/o error has occurred. ", details:", "

    [operation: "compact"]

    Same message if I just tried a "Save". Also, the error is sometimes 3125, not 3128.

    Never had this problem before. Have to do some work on the site. Is it possible to revert to the previous version of the Muse?

    Farewell wrote:

    I have work earn 10. Backup to local drive (C), which has about 1.3 TB of space available.

    The location of documents Windows 10 My a special locks to stop lossing pers people their files by mistake... you can try to make a new folder on the c drive {c: test record} and save the site in that folder?

  • Unable to connect to the wireless network after Windows update

    Original title: after receiving an update from Microsoft last week, my wireless is not working. He died immediately after the update. Why?

    My wireless does not recognize any of the wireless networks that are in my area. The driver manager indicates that the wireless driver works correctly. The wizard does not work and the Center wireless says that it cannot solve the problem.

    Hi JeffreySessions,

    ·         Do you have update installed?

    Follow these methods.

    Method 1: Follow the steps in the article.

    Solve problems, find wireless networks

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    Method 2:  Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Startup options (including safe mode)

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After the boot minimum troubleshooting step, follow the link step 7 to return the computer to a Normal startupmode.

    Method 3: Update the latest drivers for the network card.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 4: Follow the steps in the article.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=tab04

    Wireless network card: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • ENVY 14 Sleekbook - 14-k074ca: cannot find wireless networks after Windows update 10

    Hello

    I have problems connecting to networks wireless on my HP ENVY 14 Sleekbook (14K074ca) TS. Networks are available, as I am able to connect via my phone and other PCs.

    I tried the network troubleshooting and it failed. I've updated the network wifi drivers. I turned the button wireless on and outside. Nothing works.

    I noticed this change after a recent update of windows 10.

    Can anyone provide any help?

    Thank you.

    Hi@philipmanzano,

    Welcome to the HP Forum! I'm happy that you've become a member of the HP Forum. It's such a wonderful site to find answers and advice. Here is a link to guide you to what the most rewarding experience and answer questions about the display: first time here? Learn how to publish and more

    I understand that after a update Windows recent 10, you are having trouble connecting to wireless networks. Please read this post from @Great-Christine-Tree Commons fixes for wireless connectivity problems. Please let me know the results.

    Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.

  • Get the message: it is not possible to load the user profile after Windows updates

    Original title: Windows won't let me sign after updates

    Last night when I turned off my computer I saw that he had a few updates to do let him - now it won't let me login and when I try to it says that it is not possible to load the user's profile (it's the only one)...

    Recently, I installed Office and Windows 7. My anti-virus is the one that is provided by microsoft. Help!

    Hi romanista,.

    You can read the following article and check if it helps to solve the problem:

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    http://support.Microsoft.com/kb/947215

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • Behavior PWM PXI R series

    Hello I created a simple PWM using a PXI-7851R and it worked very well for the past month or so but now it behaves strangely.  Previously, so I've provided a min and max power, the impulse generated would be between these two values.  Now what is hap

  • Audio and N/W drivers for laptop XP in windows that has windows 7 previously.

    Hi, my friend uninstalled windows 7 laptop of Dell inspiron 1400 and installed windows xp, but when he tried to load the audio drivers and n/w that are compatible with windows xp, it could not able to install these drivers. What could be the best pos

  • Lsass.exe is missing in Windows XP

    When you start Windows XP, it complains that lsass.exe is missing - how this repairable?

  • HP Vision: computer hp laptop

    I've built in the drive for a DVD player.  When I put in my DVD, I get a message that says no "supported media".  What do this mean and what do I do if I can play my DVD?

  • Creation of VPN for office

    Hello I'm looking for some feedback about problems with the following design. We currently have a HQ site with an internet connection of 100 Mbps, which ends on an external L2 switch. A Cisco ASA 5520 is then connected to the L2 switch and configured