ENVY 14 Sleekbook - 14-k074ca: cannot find wireless networks after Windows update 10

Similar Questions

• Unable to connect to the wireless network after Windows update

  Original title: after receiving an update from Microsoft last week, my wireless is not working. He died immediately after the update. Why?

  My wireless does not recognize any of the wireless networks that are in my area. The driver manager indicates that the wireless driver works correctly. The wizard does not work and the Center wireless says that it cannot solve the problem.

  Hi JeffreySessions,

  ·         Do you have update installed?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 2:  Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Update the latest drivers for the network card.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Follow the steps in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=tab04

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Equium A200-15I can't find wireless networks after recovery

  After making a recovery using the Vista CD from my computer (an Equium A200 15I) cannot find wireless networks. I went into the device under network adapters Manager and then there is realtek RTL8101 Ethernet NIC etc and in the other devices section it is Ethernet and controller of Stoeage of mass.

  I'm not really sure how I can get the computer to recognize and wireless networks, but I am aware that the driver is missing!

  Hello

  Try to update the wlan driver:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  You can also check for other drivers if it is not installed:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Windows Vista cannot find any networks after reformat

  Windows Vista cannot find any networks after reformatting. Help!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L40 - Windows Xp cannot find wireless networks

  Hello

  Ive got this Satelite L40 - 17u which I upgraded to xp, I recently installed the audio driver which is a - ok and went to install WiFi realtek RTL8187B driver ehich I got the toshiba site, which installed but cannot find all the networks, ethernet is very well and everything works perfectly except that it may not pick up all networs wireless too bad mine which works perfectly as im typing this one Acer. Any ideas how to solve this problem, guys?

  Thank you

  Steven

  Can you turn on/off wireless card using the FN + F8 key combination?

• Internet disconnects and cannot find wireless network periodically. I have to restart to fix it temporarily.

  SOMEONE HELP ME PLEASE!  I have a very old laptop, since 2002, I think, that is running XP Home. Recently my laptop started to cut all of a sudden and then cannot find the wireless network. I know that this is not the WiFi because my other laptop works very well. When I restart the laptop, it works up until I try to download something and sometimes turns off while I'm browsing. I have a RTL8185 wireless card, which I replaced it with the same model. Still no change. I spent weeks in different forums, try to understand this point, and I don't have a chance.

  I thank very you much for your time. I called my ISP and he told me to try restoring the system to determine if it was the settings or if it was the hardware. Instead, I decided to search the Internet how to speed up my network because Chrome was really slow on the cell affected.

  I happened to run across this Web site
  http://tweaks.com/Windows/37934/hacking-Windows-XP-speed-up-your-network-and-Internet-access/
  When I disabled all protocols except TCP/IP Protocol, the network WORKED! Now the Internet works, I can download large files and browse shared files with the same speed as my other laptop!
  I hope this can help someone else with this problem!

• RE6500 installation problems - cannot find wireless network and wifi protected setup custom exceed 99%

  HII there, I bought a RE6500 rande Extender and wireless network has not automatically shown as the instructions, he will say.

  Ive tried following th online PDF instructions under "Basic settings" and have connected it, so when I go on 'Wireless' under "Connection with the Wi - Fi Protected Setup Button" and press the button on the Extender and the establishment, it does not exceed 99%.

  can anyone help!

  Thank you! I was just trying to find the network on the PC I used to put in place. It was not showing on my PC, but I tried my iphone and it is available here. Then, I followed the installation instructions and did the whole upward on my iphone (not on the PC as I originally did) and it worked. No problems!  Thank you!

• DMA2100 cannot find wireless networks

  Hello

  I just unpacked it 3 DMA2100 to use at home with my HTPC. I started to configure the first DMA2100 but are struggling to find my wireless network.

  A network is found, and it's the ISP´s Internet router that goes right in the Internet (and so I don't want to use ).

  I connected the DMA2100 to a wired gigabit port and configured it and did the firmware upgrade to the latest firmware (. 12).

  I then rebooted the DMA2100 and retried to search for networks. Same problem, only my ISP´s router appears.

  Then, I turned off the router ISP´s (thinking maybe it's a bug that shows just the first available wireless network), restarted the DMA2100 and tried again. No networks where found.

  I have 4 laptops in the House all are my two wireless networks and use them successfully. I have 3 Xbox 360 that uses wireless and find all networks with success. I have a PS3 which is all networks and use them successfully. In addition, on most devices, my neighbours networks shows (two) on all other devices, depending on where I place it upward.

  Not on the DMA2100 tho.

  My personal router in the House is a D-Link (curse) DIR-855. I can't say I m satisfied with it, but I had no problem with other devices connected to it. The SSID broadcast is turned on and I ve never seen not see if friends up or so come with their laptops.

  I seriously need some advice and support to get this working. What can I do to make these DMA2100 find my wireless network?

  Mikael

  Hi Wilkins,

  As my post stated, I updated the firmware 1.1.12. I'll try to non-secure network to see if it s the problem, very good idea. Pain after back my results later.

• My laptop cannot detect wireless networks after using the Windows Update service. Technical support, very desperate need.

  I tried the direct technical support, but it seemed to have cut. Given that I can no longer connect to the internet on my laptop, I'm with my playstation browser and painfully by typing with the controller.

  My probllem.
  I have an ASUS Intel Core i3 - 2350M CPU @ 2.30 GHZ running Windows 7 home premium. I've selected "Windows Update" in the start menu and proceeded to download and install all updates. Once the updates have been installed, my laptop couldn't detect wireless networks which means that I can't connect to my router and have lost the internet.
  Device Manager indicates 802.11n Wireless LAN Card is working properly.
  Windows did create a restore point before installing the updates, but everytime I try a restore I get the following message
  "System Restore has failed. Your computer's system files and settings were not changed
  Details
  System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus program and restart System Restore.
  An unspecified error occurred during the restoration of the system (0x80070005)"
  "I disabled anti Virus AVG and COMODO firewall only to receive the same message, and it now appears that the restore point disappeared as if by magic, saying system restore ' no. restore points were created.
  Updating installed Windows the following
  Microsoft .NET Framework 4.5 1 4.5.50938
  Microsoft Office Home and Business 2010...
  Service Pack 2 for Microsoft Office 2010...
  Microsoft driver (keyboard) 21/04/2009
  Microsoft driver (mouse) 21/04/2009
  Driver Microsoft (System) of 21/06/2009...
  Microsoft driver (System) 21/06/2006
  Driver Microsoft (System) of 21/06/2006...
  RALink Technology, Corp. (Net) 02/04/2013 pilot
  Update for Microsoft Windows
  Update for
  Update for
  Well when the restore point was present he says that these things will be deleted that's where I got the list, but as I said the restoration failed and disappeared.
  I have reset my router but my laptop doesn't detect a network and there are usually 10 in the region and it shows nothing. My router is fine, as I use it now with my playstation.
  Please I really need help, how do I get my laptop to detect the wireless network. If someone could give me a few steps to do, please.

  Most laptops have a switch that turns the wifi radio on or off.  Often, it is a combination of the Fn key and one of the F keys.  It may be a physical switch somewhere on the laptop.  See your manual for details.

  If this isn't the problem...

  What is the brand and model of your router?  Almost all wifi routers also have at least one Ethernet port, you can connect your computer to the router with an Ethernet cable and download the right driver for your http://www.asus.com/support wireless card
  Have you tried to "Roll back driver" in the "Driver" tab of your adapter wifi 'properties' in Device Manager?  At the very least, determine which version of the driver is installed, and compare that to the current version on the asus support site.

• Cannot connect to internet after Windows updates

  When I double click on broadband connection, it won't open after installing windows update

  * original title - whenever I have install windows update install but after pc restart I cannot connect to internet__b'coz when I double band click on the connection, it will not open__due for this I have to restore all the updates__please help *.

  Hello

  1. what operating system do you use?

  2 you get an error message while trying to access the internet?

  3 what updates did you install?

  1. you try to install an update in both clean start state (restart the computer after installing each update) and check the update is causing this issue and send the same return.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps instep 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  For Windows XP:http://support.microsoft.com/kb/310353

  Note: To restore your computer to a Normal startup mode, follow these steps:

  a. click on start in the box start the search.

  b. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  c. under the general tab, click Normal Startup - load all device drivers and services and then click OK.

  d. When you are prompted, click on restart.

  Install Windows updates in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  2 please check the items below to solve the problems of internet connectivity.

  Why can't I connect to the Internet?
  Using the troubleshooter from network in Windows 7
  Use Network Troubleshooter event logs to solve network problems

  In Windows network connection issues

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Vista wireless slowed after Windows update

  The operation wireless computer laptop HP Pavilion of my wife was slower than fishing for a month of October or November Vista update.  He was always pretty slow but now is horrible.  I tried many fixes, updates to the wireless card, hit the Max performance and played with several ideas for changing the configuration.  None have seemed help so I reset the settings before configuration changes.  I have no option to reset to get back before the update.

  LAN works fast and the internet connection is good.  A portable older IBM using XP smoke HP in wireless mode.
  Thanks to all the ideas?
  RJD

  Hello

  Sorry for the late reply. From your description, it seems that your wireless network connection is too slow since the installation of Windows updates. It is difficult to manage when things do not work as expected.

  • Do you know what update has been installed?

  Since you've already tried to fix the problem, I think can help to uninstall and reinstall the wireless network drivers. To do this, follow these steps.

  1. Click Start and then type devmgmt.mscand press enter. The Device Manager window opens.
  2. Expand network adapter.
  3. Right-click on the wireless network card, and then select Uninstall.
  4. Restart the computer.
  5. Download and install the latest drivers wireless on the manufacturer's Web site.

  Also, see this article for your reference. If the problem persists, please respond so we can search for other opportunities.

  Thank you

• Cannot find wireless networks - 'hardware radio switch off' on HP Pavilion dv6 Notebook PC

  The product name and number:

  HP Pavilion dv6 Notebook PC, product number: LZ802PA

  Operating system installed:

  Windows 7 Home Basic, 64-bit

  Error message:

  "Radio equipment extinguished."

  All changes to your system until the problem occurred:

  I was looking for a solution anywhere, including the hp Web site and forum and manual PDFs.

  I have a problem to connect to internet wireless (I can connect using a cable). The wireless button is on (seeing the key F12 is blue), but "Intel My WIFI utility" tells me that the "hardware radio switch off." I was looking for the switch on the case and sought a shortcut to do this - but could not find.

  As a result - my laptop cannot recognize any wireless connection, even if they exist for sure!

  I also used Microsoft System Restore to restore to an earlier date - before the problem accrued. There was no difference.

  Also, I reinstalled the drivers wireless Intel, Intel PROSet and my WIFI for Microsoft Windows 7. It does not help either.

  Help, please!

  I managed to fix it!

  I had to get into the BIOS and enable the network card in there!

• Qosmio G30-182: Drops Wlan connection & then cannot find wireless networks

  I use currently v.11.1.0.100 driver for Intel(r) Pro/Wireless 3945ABG, which is the last driver I found here at Toshiba.

  My problem is that I lose my wifi connection, randomly my home wlan (using WEP protection) and my University (WPA-Enterprise). After the connection drops, it is impossible to find all nodes wlan unless I reboot.

  Anyone have any suggestions on how to fix this? It is a bit frustrating to have to restart randomly because I need my network connection!

  It's OK, it s good to hear that a BIOS update solved your problem. :)

  Hope that this wireless broadcast could be resolved with the same procedure on other models of the machine.

  Welcome them

• ENVY 100 D400: Unable to save the files scanned after Windows update 10.

  After scanning the computer, I click on save button with one of two results. Sometimes nothing at all happens. Other times, the computer stops responding.

  @Roy16

  Probably, you need to delete the current program printer and install a new copy of the software full functionality.

  HP ENVY 100 e - All - in - One Printer - D410a

  Full software features:

  File name: LSD410_1315 - 1.exe

• Cannot connect to internet after Windows Update

  I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.

  Hi jlm00926,

  ·        Update that you installed before the problem?

  ·        Are you able to connect to the internet properly now?

  You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.