Envy 14 t 3000 (product A1V79AV) running under Windows 7. Bat button, and Fn + key b does not work
The Envy 14 t 3000 (product A1V79AV) running Windows 7 Professional. , Bat button and Fn + b keys do not work
Hi Ken,
Open windows control panel, open programs and features, find the entry for the right-click on HP Quick Launch buttons, and select uninstall.
When this has completed, restart the laptop.
When windows has reloaded, download and install the alternate version of HP Quick Launch Buttons on the following link.
http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56221.exe
Once the installation is complete, reboot the laptop again and let Windows take over completely for a few minutes before checking.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work
Hello
Thank you for your response.
I appreciate that you have attached a screenshot of the problem.
Have you tried troubleshooting of hardware and devices running?
Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows/back-up-registryI hope this helps.
Thank you
-
I am running Windows 8 on my PC and my flash drive does not work! I need drivers?
I just got a USB SanDisk's Cruzer Glide Flash drive that does not work with my PC under Windows 8. Will I need to go to the Web of SanDisk site to download the drivers for my PC will be compatible with the flash player? It is said that it is Compatible with Windows 7, Windows Vista and Windows XP, because it does not appear to be compatible with Windows 8 what should I do?
(I should mention that my computer is a Dell inspiron Special Edition with ports USB 3.0)
Too bad I have solved the problem, thanks anyway.
-
product key no longer works on my office 2007 business what could be the problem?
Hi Cincmj,
Welcome to the Microsoft Answers Community Forum site!
The question you have posted is related to Microsoft Word and would be better suited to the community of the Office Applications.
Please visit the link below to find a community that will support what ask you:
Discussions in Desktop Applications
http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx , that allows to solve your problem!I hope this helps!
Thank you best regards &,.
Calogero - Microsoft technical support.
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think -
line of numbers under the function keys keyboard does not work after windows upgrade
Upgrade from Windows Vista Home Premium 64-bit window Ult 64 bit. Line of keyboard under func keys works not just if online using Windows Explorer, Firefox Safari n - numbers don't work - some type; other type letter k; with the SHIFT key, signs and symbols, type anything. I can get the numbers of t using my keypad and numlock. I have tried 3 keyboards. One was a Microsoft USB 4000 ergonomic keyboard brand new and it had the same problems. My keyboard USB wireless transmitter had the problem too. All have the same problem. The keys are correct by using Word, Wordpad, etc.. Quick test repetition key online as well as the keys were all ok then.
This started happening immediately after I upgraded to windows 7 ultimate. I use a desktop HP Pavilion a6667c with 8 GB of RAM and the latest updates available for windows ultimate. The problem occurred before and after the upgrade to service pack 1. I noticed other people on the web posting on this problem too. I got no error message when using Vista Home Premium 64-bit version and had installed all the latest updates him as well.
The only solution I found to this problem is to build me a small table of characters and symbols, I can't do it, and sticking them in when I am online using one of the three browsers I use most often. I looked at my keyboard settings and changed back and forth between American and British English British without any result.
I'll post my problem of keyboard on HP forums as well. Thanks for any help anyone can give me or leads. Somewhere, I think that it is a simple problem to solve, but I searched and searched and browsed and traveled for several days to find a lot of people who have this type of keyboard problem, but no solution yet.
I was able to solve the problem on my computer Microsoft Vista but uninstalling constant guard I had downloaded and installed with free Norton from Comcast. I got this tip on another thread and after followinging their advice, I was free to use my line of numbers/symbols of the keys even once! I was able to close my copy of the email and the character or symbol and the last sheet in Word.
-
Run VI Invoke node: VI works, EXE does not work?
It is LV2009 without patches or updates. I call buffer.vi of static reference with a collection of nodes to invoke to run a VI. I don't have a very good reason for it, but don't want this code on the block diagram. I can't wait to put a lot of effort in this since I can just drag the code on the main scheme and I am sure it will work, but I do not understand why it gives me error 1000: VI not in a State compatible with this operation?
In the EXE file, when I check the status of the execution of the buffer.vi until I say it runs, sometimes bad. Same code in VI, sometimes slow. I also tried to replace the static VI reference with a reference open VI by using the name of the buffer and received the same error message. I have the buffer VI included in the compilation under always included.
So I was building an example of project because I didn't post all, boredom was the example ON what EXE has no error. WTF. Then I realized that I had another call from node in the boot sequence. OOPS. I put that in there thinking that the only way it would be mistake was if the VI was running before he called, in this case I wanted an abortion there. It turns out also-error (1044 locked VI) when running in an EXE file, even if this particular node using says he works with the runtime. SO, he tried to abort a VI that was not working. The initial error, 1000, just said not compatible with call node state, did not say that one.
Yes, sorry for the trouble and thanks for the help. Maybe someday I'll understand the problem that I was led to this, guess who is the fact that I can't debug EXEs. Kind of, I think it has something to do with an XControl I always use it because they always appear as corrupted files just before that the debugger fails. Anyway, thanks again, I'll plug that into the real system and see what else does not work.
-
Product name: HP 15 Notebook: my card reader does not work - Mute red light does not
My card reader does not work
It happened several times after the upgrade to Windows 10
It may work once or twice after the upgrade, but when there is an update from HP
My antiverious is Kaspersky internet security and it is compatebale with windows 10
Also, the Red mute botton does not work but the function works.
your opinion and your support is appreciated
Product number: L9N79EA #A2N
Product name: HP 15 laptop
Windows 10 House only 64-bit language
Hello @KhaledMorcy,
I understand that you are having a problem with your card reader and wanted to help you!
Have you tried to use Windows Updateto search for the drivers that are compatible with Windows 10? You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?
If you have problems to install the drivers, you can use the tool on the following site:
Open the Windows Update troubleshooting tool
It is possible that the drivers are not available for your product. If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10
Also, check out the following document, as it can help to solve the problem for you:
HP laptops - use and troubleshooting (Windows 8) memory card readers
Please let me know if this information has been helpful by clicking the thumbs up below.
Have a great day!
-
It won't read a DVD. It will not read ANY CD or DVD. I tried 12 different CD/DVD. This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it. I had added Nero. I removed Nero. I did all the updates. I have not released the driver and reinstalled. He claims to have the latest driver software, but it won't work. The computer can see the CD/DVD, but he calls it a 'CDROM '. It is not the case. It is a DVD/Cd-RW with Labelflash.
I did everything suggested that past discussions. I ran FIXIT program that claims that the drive works properly. It is not the case.
I tried to get various programs to recognize. They cannot see the installed media.
I uninstalled iTunes.
Please do not give me the answer of cut-and - paste stock; It does not work.
Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.
Thank you.
Hello
Well, if you have tried all the usual bugs try this:
Make a Restore Point:
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
------------------------------------------------Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
continue.Reset.
Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
could be at stake.=====================================
Here's the answer, just in case there is something you don't have, and I start up and down.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable
or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===========================================
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Running under Windows 98 / ME / 95 games on Windows 7
In the past, I often ran the older games using the DOSBox emulator. I never understood much about mechanics. I thought that this emulator has allowed me to run games written for the treatment of the different bits, such as 8-bit or 16-bit on systems which normally treatment with Setup 32-bit or 64-bit files.
My question is this - if a game says it is written for Windows 98/ME/95, but does not specify the size of bits for the treatment, will it still work on Windows 7 with DOSBox?
MattSA
In an ideal world XP Mode in Win7 installation should work. When we consider that Microsoft it is mocked as a point of sale real it me nauseated.
Unfortunately, it is not an ideal situation or an ideal world. I also once I have thought Win7 Pro (wow, Id love to play some of my old games [which I have hundreds] master of orion ii and just all kinds of other) as ok I'll divy upward of my readers install win7, set up my dual boot, install slackware (as I have no program or do the processing in windows than in * nix). then go back and install xp mode and then install some of my games (brain drool). bad...
you see xp mode in Windows 7, unless you use another virtualization product or use virtual pc and install xp... does not include the support of directx which I discovered to my dismay total. so when you go to install programs or run your video and sound card drivers do not work. now, if your program doesn't use DirectX (maybe it uses opengl or something) you might have a chance.
you stand a better chance with dosbox in victory or one of the emus back several Linux at least those who have been proven to work with a lot of games of this 'time '. I feel that Microsoft has been very short sessions of R & D for the xp mode cooking upwards. "lets give them the feel of xp but with only half of the feature where ONLY MS products will work and perhaps some 3rd party applications" they do not allow the idea to evolve as you see as many users at home such as myself do not work on their machines (a writing, mix and record music from home on my machine) when the working day is over I like to play the games and I'm not in the minority in this light. Finally, there is freeware (as mentioned by myself and others) solutions allow you to heal that envy for your old skool gameage without having to sort through the lame idea of microsoft virtualization. seriously, I can boot linux (totally free) loading WINE install a xp or 95, time 98 game and run it in 1/16th time you need install xp mode and do not have to set at 1 penny to do
-
I have an old (Tshirt maker) Hanes program that runs under Windows 95/98. My Vista computer will not work the old program. I dug my old laptop that works under Windows 98 and, of course, it took the program, but I can't figure out how to get the logo (that I have saved on a flash drive) to download on your old computer! The logo is saved in Publisher 98 and old computer run Publisher 97. Access to internet on the old computer's dial-up! Any ideas? Thank you!
OT: Windows 95/98
Hello
I suggest you run Hanes (Tshirt maker) program in compatibility mode. Run the program using settings from a previous version of Windows. Try this setting if you know the program is designed for (or worked in) a specific previous version of Windows.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-in/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
Keep us updated on the status of the issue.
-
Download CARDFILE. EXE running under windows 7/XP compatibility?
Can someone help me get CARDFILE. EXE running under windows 7/XP compatibility?
You can associate all the CRD files to cardfile.exe. Then make a shortcut to one of your records CRD and the shortcut will launch automatically cardfile.exe and open your clicked in CRD file.
How do you associate files CRD with cardfile.exe? Easy. Right click on one of your CRD records, select Properties. On the general tab, there is an article entitled: "opens with: There is a 'CHANGE' button to the right which, when clicked, takes you to a list of applications from which you can choose. You can configure your system open the CRD files with any application of your choice, but the CRD files are from cardfile.exe, then this would be your best choice.
I hope this helps.
-
Running under Windows 7 CARDFILE
In the past, I have transferred my 2 CARDFILE applications successfully from WIndows XP to WIndows Vista, but cannot get them to run under WIndows 7. I tried all the fixes compatibility with WIndows 7, but none seem to work. All solutions anyone?
Peter Vickers
[In the title: Wildows changed for Windows]
Cardfile started life in Windows 3.1 (1992). What you need is a compatible program Windows 7
A few replacements cardfile for Windows... Almost all of them will import a cardfile of MS. Choisissez_ in one that does...
-
I can't get the first CS5 for import running under Windows 10 .mov files. MOV files will play on Windows 10 direcstly. Can anyone help? I tried quicktime player loading but it will not work with Windowws 10
You need to find an older version of Quicktime, from Apple, to be able to install on Win10
-
How can I install CS5 on a replacement/new laptop? I paid full price in 2011 and the key (and it appears in my Adobe account under products), but it was a downloaded product and I can't find a download of this online version and my key does not work in CC.
Your key does not work in CC, this is a newer version and would require a new purchase.
Downlaod CS5 here.
-
ok CS5.5 is to run under windows 8?
Dear Sir / Madam
I'll buy the new computer with window OS 8 Pro (64-bit).
So my existing CS5.5 runs under Windows XP in my old computer
Could you please say on issues such as below:
1. how to transfer CS5.5 to new computer with window OS 8 Pro (64-bit)?
2. how to solve this error running Adobe Illustrator CS5.1?
I'm looking forward to your reply
Andrew
If you don't have disks for CS5.5, you can download CS5.5 test below the link to your new computer to the versions of the page of the web site and then use your current serial number to activate it. You must follow Instructions very important to do it right
http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html
You are allowed to keep the two machines with facilities activated Adobe software as long as they do not both use the same software at the same time. If you want to remove the software from the older machine you should disable everything first (under help options) before uninstalling.
Maybe you are looking for
-
FlexBox changes in 34 FF broken my layout of the application
We use flexbox strongly for an application of office as looking for the web app and it worked out great. But with the latest edition of developer of Firefox (35.0a2) the layout behaves as expected (it grows beyond the display window): http://jsfiddle
-
Coupon boyfriend appeared but does not appear in addons or extensions.
That's what gets me. I have not installed toolbars - NONE. I've been on the Web download NCH site a version beta of beginnings and noticed in the upper corner of the screen number R three in what appeared to be the angle of a roll back page paper. I'
-
It does not load properly, freezes, crashes unexpectedly, don't pull up of PDF files from web sites and has problems with hotmail. I used Firefox for years and have never had this kind of problem. How do I downgrade to an older version? The new versi
-
Satellite C660 - cannot play Minecraft
On my newly acquired Satellite C660 with Windows 7 and the latest Java does the game not minecraft despite repeated installation of the game and java. Can someone help me please. Thank you
-
I want to buy an iPad 2 Air and run Hema maps on it - Hema Explorer and 4WD Hema maps. Can I run these on the iPad 2 to Air EVERYWHERE in Australia because it indicates that the iPAD has 'Assisted GPS and GLONASS' or do I need a SIM card as well. I w