Envy 15: HP Envy 15 - Intel 7265 - WiFi fails to connect

Hello

I have a HP Envy who came with 10 windows and has an Intel WiFi 7265 card. I started the Setup program and was able to see WiFi connections and connect to the office and two - House. Once all updates completed, I usually used it between the two locations of WiFi - both work very well. However on a trip, I tried to connect to other WiFi and since tried about 6 different options and all fail - "Connecting" message shows, then disappears and no connection was made.

Different wireless devices include a 2Wire, Dlink, Cisco Enterprise Access Points, Access Points, a three hotspots different telephone based. All do the same thing.

Steps for debugging:

(1) update driver. HP site has a driver from March 2016.

(2) installed the driver Intel AC-7265 from 09 20, 2016.

(3) change the settings for the favorite band at 2.4 GHz and also at 5 GHz and neither make a difference - DLink business devices and Cisco work in both frequencies.

(4) change the widths of 801.11 channels to 20 MHz only.

(5) changed "wireless mode" in the pilot of 802.11 a, then g, then a / g and back to the default a/b/g value.

Done everything above with the disabled on Bitdefender firewall.

None of these worked, shaped so I'll post here, to see if maybe someone else has had something similar and did get a resolution.

Any help is appreciated.

Hello

I finally get a resolution - not really a resolution, but at least my WiFi working properly I can say - I ended up factory restore.

In essence, it is a workaround, because everything that triggered the issue could not be overturned and fixed. Had to spend the whole weekend to get my data/apps etc put in place again, which is exactly what I wanted to avoid.

I think someone else can begin to rebuild their system instead of having to try all the options we've been through here and save themselves a lot of hours of frustration.

Thank you.

Tags: Notebooks

Similar Questions

  • Will be the work of card Intel 7265 Wifi on my Yoga Pro 2?

    I asked this question several times in the thread about the yoga pro 2 wifi problems, but it seems that no official representative seems to respond to our calls to find out if it works or not.

    I want to buy a 7265 NOT 7260 intel card for my lenovo yoga pro 2. I'll buy it where Lenovo will advise you to buy it. Can you please just tell me who it works on my laptop and I'm going there buy immediately!

    Furthermore, my Lenovo Yoga Pro 2 is planned for the Croatian market, I think (although I'm a Macedonian and I bought it from a dealer official Macedonian Lenovo and now my keyboard is messed up with Croatian letters, but that's another story). Is this lock active BIOS on my model, as well as American models have? Can I Exchange my wifi card for what wifi card?

    Update: AC-7265NGW happened, does not work. Does not start, error message "unauthorized wireless network card. Turn off and remove the unit. »

    Despite what Lenovo technical support told me 2 days ago, it does not. The person I spoke today after that this message was absolutely no idea, but also told me that there wasn't anything she could do to help.

    What I get from this is that "Technical support" Lenovo is not tech savvy at all and don't know anyting about the products, only how to read instructions of troubleshooting on a screen.

  • After update on Toshiba 32W3455D (B) - wifi fails to connect

    Hello

    I hope that someone can help you.

    Our Toshiba TV UK (B) 32W3455D updated itself this week.
    Since then, we have been unable to connect to the internet. Initially, he said missing a wifi dongle - I have no idea what it means.

    Then we tried a retune on TV channels and that the message went away but even if we can now see our wifi connection (which works fine for each item in the House) it takes the password, but then just do not connect.

    Is it possible to reset the TV, perhaps, to see if that helps?

    We have tried to disable the router box entirely and restart it already and have disconnected and reconnected in TV.

    Software update version is B3.54E and application version 3.30.

    Hope that I put this in the right forum and apologies if I did not. Any help most welcome.

    Thank you

    > Is there a way to reset the TV, maybe, see if that helps?
    It s is strongly recommended to reset the TV after each update of the firmware and I think that there must be an option to reset the settings of a TV.

    Have you checked the manual for the use of this information?
    Television was released 6 years ago (2008) and unfortunately, I couldn't find a manual appropriate for this TV camera on internet usage. :(

  • WiFi fails to connect when active Wep - Satellite L350

    Hello

    I have a Satellite L350. Day 1 purchase, free Wi - Fi was OK. Updates to operating system Vista Home Premium starts automatically and SP2 installed now. Now impossible to establish wireless connection WEP enabled on the router (3Com Office Connect ADSL Wireless 11g Firewall Router. Error message indicates the security settings of the network adapter (Atheros 5007EG) are incorrect.

    I have them repeatedly redefined and encryption of the router several times. Nothing works.
    The adapter can find my SSID of the network but will not connect. However if I turn off the WEP connection works.

    Cable connection to the router is working OK

    Driver for card is reported as more later.

    Can't think of anything else to do.
    Advice please.

    Hello

    It is certainly a problem of encryption
    You should check the configuration of your router again

    That means tat that you should try to change the type of encryption; try using WPA instead of WEP.
    This should be replaced on the router and WLan configuration settings
    Check if you can configure using the Atheros WLan WLan configuration tool
    But if you would do this, please don t forget to turn off internal Windows zero config.

  • Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

    Hello

    a whole new Tecra A10 with buildin Intel 5100 WiFi fails to connect to the Wlan router, using the pre-installled Vista Business 32-bit. Vista has always said: wrong password.

    Yes, Wifi hardware is enabled, of course. And Tecra WiFi OK MAC is stored in the config of the router. Also the WiFi settings were correct (wpa2-psk aes), corresponding to the Wlan router. Password WPA2 is 13 characters. Connect all the other machines with a Wlan successfully turns a working Wlan configuration and use of the correct password.

    I installed the latest driver on the Toshiba site - without success. I also installed the version of the driver from the Intel site will, too--without success. Doesn't matter what tool I used to connect, Vista itself, or the specific tool of Toshiba (Radar), choice to get an encrypted Wlan connection.

    WPA2 and WPA or WEP can be used. I can't get a Wlan connection when encryption is totally * disabled *! Currently, I use a * clear * Wlan to use this Tecra A10 in the network. Real gross and no solution for more than a few days.

    All other devices in the same network can connect the router Wlan with WPA2-PSK and WEP, no problem. Only the A10 / WiFi 5100 fails.

    Searching the Web I found really many reports all issue of WiFi with a WiFi 5100 devices, so it seems to be a generic material or / and driver issue.

    How can I correct this Wifi 5100 connect problem and use encryption WPA2-psk on Tecra A10 and WiFi 5100 with Vista? If this is not possible, I have to return this laptop and get another model with a working Wifi / Wlan Hardware.

    Thank you.
    -Thomas

    Hello Thomas

    Have you tried to connect your laptop to another router by friends or elsewhere?
    It is really strange that you can use any of the WIFI ciphers available.
    Have you tried to reboot your router?

    I have Satellite A300-1LI with the same card, WLAN, preinstalled with Toshiba recovery WXP image and I use it sometimes linked to the WLAN with WEP encryption.
    Have you tried to contact Toshiba or your local dealer for advice?

  • HP ENVY j106tx: Intel 3165 AC WIFI + BT vs INTEL AC 7265 WIFI + BT

    Hello

    I am looking to buy the newly launched HP Envy j106tx. It comes with wireless Intel 3165 AC module, but I would have preferred a with double radio as Intel 7265 rather. The chipset for laptop is Intel HM170. I would like to know if there will be problems of compatibility with such upgrade.

    For some reason, HP does not allow for customization at time of order in India, but after purchase, will be able to upgrade for me, at cost, to one of their service centers?

    Thank you

    According to the for HP ENVY laptop (model numbers used: 14-j000 by 14-j099)-Maintenance and Service of Guide, the following WiFi cards are factory in this series of computers options.

    WLAN module:
    Broadcom BCM943142 802.11 bgn 1 × 1 Wi - Fi + Bluetooth 4.0 m2 Combo Adapter - HP ref #792608-005
    Intel 3165NGWG ac 1 × 1 + Bluetooth 4.0 THE PCIe + USB Combo Adapter - HP 2230 NGFF hand #806723-005
    Intel Dual Band Wireless-AC 7265 802.11 ac 2 × 2 WiFi + Bluetooth Combo Adapter - HP ref #793840-005 4.0
    Intel Dual Band Wireless-AC 3160 802.11 ac 1 × 1 WiFi + Bluetooth Combo Adapter - HP ref #784644-005 4.0

    It is possible that we could remove the back of the computer and change the WLAN card.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Card wifi Lenovo Y50-70 - why I can't install intel 7265 NGW?

    Hello

    I am installing a new wifi card Intel 7265 NGW in my Y50-70. He returned in the form of unauthorized card.

    How can I allow it maybe this card cannot be installed in this model?

    Thank you much for the help. Just a note that I now Atheros Qualcom AR956x

    tomgawron wrote:

    Hello again

    I went to the Intel site... and there of nothing like RUF in conection with any of their wifi cards...

    I don't know what to do now... other people suggesting to Flash the bios, so you can completely remove the white list, but I don't know how to do either...

    I want really to hold own/quick wifi ac card to work on my laptop, but it seems that the mission impossible.

    Why is it so difficult?

    The FRU number is Lenovo from restriction by changing the card wifi of their system. There are members who have found maps with numbers of RUF in Ebay. However I don't know if it will work in your case. Indeed, it is difficult to replace the wifi card in units of Lenovo.

    Options that you can take:

    1. ask your BIOS modified. You can install any card without the FRU. However, it is risky because the bios could be destroyed.

    2. use a USB wifi dongle. There is no restrictions for these devices. And it's also cheap.

    3. look for the wifi with a FRU number card in Ebay.

  • Desktop 700xt HP Envy with intel i7 - processor image 4770 has a DVI connector port

    I bought a HP Envy with Intel i7 - processor image 4770 700xt and Windows 8.1.  I would like to know if this computer has a DVI connection charging port.

    Assuming that your 700xt want model has a back panel that looks like the one below, it has a VGA output (analogue only) and a DVI - D output (digital only);

    #4-VGA (analog only) 5 - DVI - D (digital only)
  • HP Pavilion dv6928us [Intel Wireless WiFi Link 4965AGN] random disconnections

    Product:

    HP Pavilion dv6928us

    Hardware specifications:

    http://support.HP.com/us-en/document/c01485372

    OS and information network:

    • Wireless router: ASUS RT-N56U on the latest firmware 3.0.0.4.360
    • OS: Windows 7 Professional 64-bit SP1
    • Windows Firewall is disabled

    Network card:

    Intel Wireless WiFi Link 4965AGN
    Drivers updated to the latest version: 13.4.0.139

    • Channel 802.11n for band 2.5 width 20 MHz only
    • 802.11n mode
    • Ad Hoc channel 802. 11B / 11 g
    • Ad-Hoc mode of WMM QoS off
    • FAT Channel intolerant with disabilities
    • Mixed mode Protection CTS automatically
    • Vagrant aggression 3. Medium
    • Transmit power 5. Highest
    • 6 wireless mode. 802.11a/b/g

    Steps in trying to solve this problem:

    1. The option "allow the computer to turn off this device to save power" is also disabled.
    2. I have the power options set to High Performance.
    3. I installed inSSIDer and I'm the only broadcast network on the 5 GHz bandwitdth (so there is absolutely no interference whatsoever)
    4. I spent between the 2.4 GHz and 5 GHz and the same thing happens. See below

    Question:

    My laptop to find < 50 meters from my wireless router (no walls between the two) and I connected on 5 GHz bandwidth. I get random disconnects all along the day make a red X on the network icon in my taskbar. The only way to correct 'temporary', it's completely restart my computer.

    On the other hand, my mother's laptop is in the other room, also connected to the 5 GHz range, ran into problems of ZERO at all.

    What could be the problem?

    If anyone else knows this problem, are the only two (solutions)

    • "Allow the computer to turn off this device to save power" option checked

    OR (if this does not work)

    • 802.11n mode Disable

    802.11n mode for Intel Wireless WiFi Link 4965AGN for operating system Windows 7 and 8 is buggy. Which causes intermittent wireless disconnection.

    Sources:

    http://communities.Intel.com/thread/32614

    Myself.

  • Satellite P100-429: Intel Wireless Wifi Link 4965agn card is not compatible?

    Hey guys

    I have a Satellite P100-429 with a 3965abg to intel, I have a few router purchased months ago Netgear wnr834b n project, then think, it is high time, I upgraded my internal adapter.

    I wanted to know if the Intel Wireless WiFi Link 4965AGN adapter would fit that is a right with the 3965 swap, as it says it's connection is Mini PCIe card * and I have no idea if it would fit?

    Hello

    Yes, she should go, because the W-LAN-mini-card slot is a PCI-Express, so you'll just have to swap the cards. But be careful with the antenna connections, if you bend them too so they break very quickly and then there is NO WAY back and you will pay for the exchange of
    the whole cover, where are the antennas of screen.

    Best is to contact a local service partner if they exchanged, you don t therefore the risk for the guarantee void if you do something 'not very good' on your machine. :)

    Welcome them

  • Cannot start the HP Pavilion dv7 - Intel(r) WiFi Link 5100 AGN

    the WiFi has been disabled by the Device Manager, and I can't activate it

    When I get in the Device Manager, one! sign was shown next to Intel(r) WiFi Link 5100 AGN, and I click Properties, the device status displays the message below:

    "This device cannot start. (Code 10)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

    When I click on "Find solutions", it displays 'could not load driver software' and no solution appears

    I tried the function "update driver" and still no idea to him.

    not the product. My dv7 is VQ971PA #AB5. Model no. dv7-2124TX is

    Thank you!

    Hello

    You have a few options in my opinion please try these steps can help you solve your problem.

    (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

    (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

    (3) try to do a system restore to the date where unit was working fine.

    (4) Please update the Bios driver & wireless from the HP website.

    (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

    (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

    If you still have the same question so you must call HP tech support and get the replacement of the part.

  • Windows 7 update disabling Intel my WiFi Technology adapter

    I recently bought a Vaio laptop for WiDi features.  Out of the box, it worked as advertised, but after a tour of the various updates from Microsoft and Sony, the WiDi becomes invalid.  The message that appears is: My technology Intel WiFi disabled, please reboot your computer.  Another message that appears is: Intel My WiFi Technology: card not found.  I poured over all the seller community postings (Netgear, Intel, Sony) on this issue, but nobody seems to have a solution.  The only recovery method must do a restore of the entire system that puts everything back to factory settings.  As soon as I did this, it works for a bit, until the updates download again.  I tried to turn off the auto updates, and I have ensured that all the newer drivers have been installed (in the same after doing a full system restore), but nothing seems to prevent the adapter to become invalid.  I have no problem with WiFi, only the WiDi.  This issue seems to affect all brands with WiDi capabilities.  I don't know if it affects only Intel i5s or two i5s and i7s.  Does anyone have any other suggestions?

    Thanks for the suggestion to roll back the driver.  However, I have found that when I open the Device Manager, I managed to re - activate the device working properly and it was not necessary for me actually to restore the driver.

  • Intel Wireless WiFi Link 4965AGN with Inspiron 1525 problems

    I have Inspiron 1525 + 8.1 Windows + Intel Wireless WiFi Link 4965AGN (Intel last driver for Windows 8). If I set the off mode N card wifi, wifi is more slow (54 Mbit/s), but stable. If I turn N (enable) mode, wifi is fast 144 Mbps, but becomes unstable - often (few minutes) disconnects, the disconnection of the card shows a lack of drivers, you cannot reconnect to the router, you must restart your computer. Another computer - Dell Studio with pre-installed map 5100 is stable under the N on my home network. Dell officially submitted the 4965AGN card is compatible for Inspiron 1525. Is it possible for stable operation in N mode?

    waltur,

    I'm glad to hear that you were able to find a solution to your connection problem. Thanks for posting back.

    Take care

    Rick

  • I can't share my Wifi using Intel my WiFi utility

    I use ACER 4830TG more than a year & I am pretty satisfied. My problem is that I have a Nexus 7 (WiFi) & I used generally to share my wifi PC internet using my WiFi utility intel. But for a few weeks, I am unable to share my Wifi using Intel my WiFi utility. It shows always connect & disconnect info with in a few seconds. But if I share my Internet then it connect with my Nexus 7 & of course, I'm not able to use internet then. Need urgent help please. BTW, earlier, I tried intels new dashboard 15.1, but it does not support my WiFi adapter. So, I rolled back & connect with a common, but now I can't!
    My WiFi profile current settings:
    Security: WPA2-PSK
    Type of encryption: TKIP
    Filter network traffic: disabled
    DHCP and DNS server: enabled
    Default channel: 3
    No device is blocked!
    BTW, I used to connect to the same profile settings, but now it is connect any more.
    Need urgent help please

    Hi Ryan,

    Thanks for posting in the Microsoft Community Forums.

    I understand from the description of the issue, that you have problems with wifi on the Windows 7 computer connection sharing. I will certainly help you in this regard.

    I appreciate if you could help me with more information.

    -Don't you make changes on the computer before this problem?

    Method 1:
    Firstly I suggest to enable network discovery and check if this helps you solve the problem. To do this, please follow the steps below:

    (a) Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the navigation pane, click change advanced sharing settings.

    (b) to increase the profile of the current network.

    (c) click turn on network discovery, and then click Save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To learn more about this feature, please visit the below mentioned link:
    http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

     

    It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers print.

     

    Method 2:

    I wish that you disable the Windows Firewall as well the antivirus temporarily.

    View items-

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

    Method 3:
    Also I suggest to run a network diagnostic tool and check the hope that will solve your problem.

    To make this problem troubleshooting, please follow the steps below.

    (a), click on Start > Control Panel.

    (b) click network and Internet, click network and sharing Center.

    (c) under network and sharing Center, click on solve the problem.

    For more information about how to resolve common network problems, please see the links below:

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Back to us for any problem related to the Windows operating system. We will be happy to help you. We at Microsoft try to provide our customers the best experience.

  • Intel(r) WiFi Link 5100 AGN installed in a Studio 17/1745

    I recently lost network connection using the-built in Intel(r) WiFi Link 5100 AGN. Stupidly, it happened while I was still under a contract of Service, but because of the holidays, I turned it off and the contract expired in mid-December.  I have a Studio 17/1745, I disconnected the internal WI - fi card and use an N of D-Link USB and I now have a WI - fi connection. Should I buy a new internal WiFi card and if so than that.

    met100,

    Places to look to see if your connection is activated

    What program anti-virus and firewall are you using? I see virus program lead to problems of connections.

    Can you run system information search REMOVE YOUR PRODUCT ID and OWNER REGISTERED, if you use XP, run an ipconfig/all log and post it here.

    Rick

Maybe you are looking for

  • Images not appearing NetInstall do not.

    Hey all!  It's my first time setting up a server of NetInstall and, as far as I know, everything is set up correctly - but none of my images are appearing.  That being said, I have my server set up using a static IP address that is on a different sub

  • Satellite Pro 400 onboard Bluetooth problems

    Hello I have a u400 with installation XP Prof When you activated the on-board bluetooth sound is broken. the sound plays a broken sound. Install the new driver and his fix at the moment. Activate the bluetooth, but the sound is broken. The client usi

  • Intel/Pro Wireless hangs at shutdown

    Hello worldwhenever I have stop my Toshiba Satellite A 100-151 the Intel/Pro Wireless software crashes and stops the windows xp shutdown process.anyone else with this problem or maybe: How can I solve this problem? Thank you from berlin, GermanyStef

  • I have Ideas different to iCloud on my iPhone and iMac.Can I have the same on both?

    I have a different apple for iCloud ID on my iPhone and my iMac. I used my iPhone to increase my storage on iCloud, but I find that this extra storage space is not available on my iMac. I tried to change my ID on my iMac, but am unable to do it to li

  • his strong 'Willy': niSwitch DMM PXI switch Handshaking.vi 4071/PXI-2527

    I run the example of the handshake: "niSwitch DMM Handshaking.vi switch" for 2527 PXI DMM PXI-4071/SWITCH in a chassis PXI-1033 for a measure of 1 Volt DC test. When I type 'Run', the switch block makes loud continuous noise "zizi"; the graph of 'mea