Envy 15-j104el: updated NETWORK WiFi card and RAM update
Goodmorning to everyone
I write this post to ask for information on the possibility to do an upgrade of hardware on my HP Envy 15-j104elsystem.
That's what I would do:
-Replace the network card (NIC) to a wireless better and possibly with a compatible AC NIC.
-Update to 16 GB of ram, put benches with CL9 SODIMM
The questions that I want to bring to your attention are:
-There is a 'white list' for the wifi card on my BIOS (actually F66)?
(consultation with the service manual there are little NIC OEM selled, y at - it ONLY compatible?)
-Put the sticks of ram CL9 (instead of CL11 currently OEM mounted), I can inprove the overall performance?
I want to install are:
-Intel Wireless-AC 7260 more Bluethoot HMC 4.0
-Kingston HyperX Impact DDR3L 16 GB (2x8gb) SODIMM 1600 Mhz CL9 (Kit)
According to your experiences, is it compatible? I can buy them without any problem?
Thanks in advance to anyone who can help me. Thanks for your suggestions
In particular, I take this opportunity to greet and also need the help of my friend @visruth ;)
1. no whitelist. Your laptop was conducted after HP stopped using a white list so that you can install any card with the right form factor and the number of antennas. The Intel 7260 card should work.
2. you can install the CL9 memory but it will not do anything all run faster. The motherboard is made to operate at the speed of the OEM memory so the Kingston Hyper-X will work, but the specifications of it in operation will be the same as memory OEM.
Tags: Notebooks
Similar Questions
-
Pavilion 15-N064NR: update of wifi card and memory
Hello, I have problems with my wifi, just disconnects all the time, that I can install and new and faster wifi card, and I can add more memory to this laptop thank you Mike
Yes, you can switch the two quite easily. Here is the Service Manual:
You have 6 GB of memory which is a 2 gig and a 4 GB module. Your best return for the dollar will come to launch the 2 gig module and install a second 4 GB like the original module. This will give more memory and also run faster since it is dual channel. You could install up to 16 GB (2 x 8), but it would cost a lot more and provide many additional benefits. See p. 47 of the manual for instructions.
Your model has no HP whitelist and you can install any wifi card that is the right form factor. See p. 49. It's a low-profile mini-pcie form factor. The original wifi offered thereon cards are little lame. It's one of the better ones:
Let us know if you need more information. If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Pavilion g6 2230tx: can I update my driver graphic card and RAM
I had HP g6 2230tx with dedicated 4 GB of ram and raedon graphics card... I want to know if I can update my graphics card with nvidia cards... And if yes what cards are compatible with my camera... And if I can improve my 8 GB RAM...
I aould want also know is what are the raedon cards and nvidia would be compatible with 8 GB RAM or RAM have nothing to do with the graphics please help...Upgrading the video card is a non-starter. The video chip is soldered to the motherboard and not something that can be removed and replaced.
Here is the Service Manual:
See p. 47
For 8 GB, the max you need 2 of them:
4 GB (PC3 12800, 1600 MHz) 641369-001
More memory will help the video a bit. Not a lot. You say you have 4 gigs which is not bad, so an upgrade to 8 will do any type of work only a little better and video games a little bit better. Don't expect significant increase in the frequency of images of the games, for example.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Upgrading a p6510f Pavilion with a new power supply, graphics card and RAM work?
Well, here's the deal that I go back to Japan for about 3 months and during this time I will borrow my laptop Cousins (in Exchange for my office) for Skype etc.. No problem their the thing is that he is a player and this p6510f has a few bad specifications when it comes to this, so I thought that I could let him borrow some cake rather than dirt, if you catch my drift ha... As well, when I get back gamer I ~ ('voice of Yoda"aka How Japanese works...)
So I looked on Newegg / Amazon read comments and planned my purchase but the question is can this case and the Board of Directors manage what I use? lazy to measure everything out / busy.
So first thing, I would like to replace:
Replace the 2 x 2 GB ram cards default with:
4 x Corsair blue Vengeance 4 GB (2 X 4 GB) 1600 mHz PC3-12800 DDR3 SDRAM of 240 pins
For a total of ram 16 GB with my x 64 bit PC of course
Link: http://AMZN.to/KtMt9m (note that I buy two)
Replacing power 250w with an overkill rather one but it is the same price as a 550w then why not eh? After all the future upgrade/ability to use it in future builds?
1 x Corsair Enthusiast Series 650 watts 80 Plus Bronze Certified Power Supply Compatible with Intel Core i3, i5, i7 and AMD platforms
For the graphics card + overclocking.
Link: http://AMZN.to/IkLTdp
Finally no more ATI integrated BS... Please for the love of the creator (will it work?)
1 x EVGA GeForce GTX 580 1536 MB GDDR5 PCI-Express 2.0 2DVI/Mini-HDMI SLI
If my PC can adapt to this card, and it works with power above that will make me happy enough. (Regarding the cooling if it becomes a problem, I can upgrade fans me but first comes this material.)
Link: http://AMZN.to/IFiEa2
I checked the slot for graphics card, RAM and power supply power and it seems to me that this will work out I want just a professional opinion...
-----------------------------------------------
Card not present upgraded
HP Pavilion p6510f PC / Nr WW639AA #ABA
Four cores AMD Athlon 630
4 GB Ram DDR3
HARD DRIVE 750 GB
Integrated ATI Radeon graphics card...
Power Max Power 250W
Windows 7 Home Premium 64-bit
-----------------------------------------------
Thank you! ~ Of Amerindian
Hello
According to Corsair, the DIMMs that you chose is detected only at 1600 mhz, which is not in the specifications published by HP.
You can roll the dice on the DIMMs that you chose, but I wouldn't recommend that buy you them until you contact Corsair and get a confirmation. Computers HP can be very finicky with DIMMs, especially if you try to mix them with other DIMM modules. If you do buy these bars and want to be them mixed with the existing DIMMs, then make sure the timings of latency CASE corresponding information validated HP. Also mix DIMM sizes will cause the memory function in unbalanced mode that adversely affect the performance of the memory.
You should be able to make your own decision on whether to roll the dice.
-
HP ENVY x 2 CTO 11 t-g100: HP ENVY x 2 replacing the WiFi card
Hi, I want to improve my HP ENVY x 2 CTO 11 t-g100 Wi-Fi card «Intel wireless 7620-N"to «Intel wireless 7620-AC»
"Intel wireless 7620-AC" will be acceptable to use, or should I try a new?
I have improved my Split X 2 map of 7260-ac and it works perfectly. No problem with WiFi or Bluetooth. I guess that the envy of X 2 will be fine with the upgrade as well.
-
HP Envy 750-114: replacing a graphics card and opening upward
Ok. I'm already sorely regretting the purchase of any computer with a graphics card intel. I wish never to see another computer of graphics cards intel. I've got people who can advise me (somewhat) about how we replace these things. But still, in my ignorance, know that the first requirement is to open the machine. They wanted me to take a picture of the inside to give a sense of my options.
Only I can't the infernal thing open. I see what looks like should be an easy thing of twisty open, but no other screws that look like they open on one side. However, the twisty thing is totally impossible to twist. Nothing I have is able to open it.
Someone please tell me how to open this thing! There must be a way that does not require a hammer. What I want is a graphics card that works - I can't even this one to play older games (and it is for most everything I play, except star wars the old Republic.) And the last driver update that has even beaten!) The graphics card intel cheap is literally the only thing stopping me. It meets all the other requirements. But I can't yet figure out how to get the thing open so that people can give me advice on what I can replace it with.
Help, please.
I think that there is a hole in the nut as you try to turn. In fact, you can insert the right Torx screwdriver and turn it to the left side. This should allow you to open the case. At least what I had to do to open the suitcase on my new HP Phoenix. I have to admit that it was not easy to do, however.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
I have an old computer for 2 years since November 2010. I bought it as a performance of office but not like a video editing machine (I entered the DSLR videography in summer 11').
Here are my current features:
Windows 7 64 bit
C: drive (7200 RPM) for the OS/programs and export/output destination. PP & AE CS5.5
D: Media Player Source images 1.5 TB Caviar Black @7200 RPM 6.0 GB/s
12 GB of Ram
CPU i7-2600 to 3.4 GHz
ATI Radeon HD 5570 Graphics Card.
I'm saving for CS6 production premium so I would like to update some of the components of my machine to cope with confidence.
I would go for 24 GB of Ram... it's enough for me right? 32 is necessary for me? BTW, I am only editing DSLR video files. No files of camera as RED etc.
Secondly, I need a solid videocard PP/AE (CUDA) GPU acceleration to edit videos with the applied effects, in a buttered smooth playback that bogged my material.
I don't know where to start with graphics cards, I know not much about them, or what to look for when buying a solid graphics/video card? The Nvidia GTX 660ti is good for me in this circumstance?
Summary:
RAM?
Card video graphics... suggestions?
All for CS6 PP/AE
1. the i7-2600 is a locked CPU, which means that overclocking can only be done by modifying the BCLK parameter, which is not easy. The i7 - 2600K is an unlocked CPU, so overclocking is a simple matter of changing the multiplier in BIOS.
2. the Ti 660 is currently the best map REGION (bang-for-the-buck) IMO. It is a great card in combination with the i7-2600, but of course may be extended to a new system without problem when the time comes.
3. I would only watch 1 TB disks, since they have the best ratio of $/GB without costing an arm and leaving most unused space. 2 or 3 disks to have even better $/GB ratio, but it is questionable to know if you would need so much space.
To save money on my own version, I resorted to the drives of 1 TB only, although I thought initially to 2 TB drives, but finally I opted for drives of 1 TB enterprise. See planning and construction of a new NLE system.
-
I went to the Device Manager to see if something was not working and the 9 and 11 adapters will not load not because of something that invovles windows, I didn't understand and I wanted to know if these cards need to work. Also my Intel graphics driver kernel slows things should uninstall.
Hello
Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site
go to their website and look for a driver and software download section
Enter your model number for the last look drivers vista then download and install
http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen
-
Wireless card not working after a clean install of Windows Vista
I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.
I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.
I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.
I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.
In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.
Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.
Hello
The on/off switch actually works?
Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
Start - so look at the screen.Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
Re-install of Vista?---------------------------------------------------------------------------------------------------------------------
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Using a HP Pavilion and windows 8.1
I seem to have problems connecting to some (not all) public wifi. recently I went on a campsite that had wifi complete and recorded a full bars on my screen, but could not connect breakfast and no sign of network was visibly.
I talked to the wifi operator who indicated that they had other connected without any problem which made me think it was me, or more specifically windows 8.1.
My wifi works perfectly at home and on many other sites, but sometimes it does not show a present network and it's frustrating
With the same laptop, I had connection issues wifi municipality in an apartment I have abroad, but when I had my own installed, it worked very well and in any case a very strong since routers signal... What's going on and how do I get over it..... ps I have competent but not a techie!
Hello
Check their documentation online with the HP Support and drivers, diagnostics and ask to their
Forums about known problems.HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/
======================It is possible that the drivers you use, even if later now available, are not
100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
RealTek, Atheros and others may have newer versions is not available to the mother of system
-site of the manufacturer on board. And continue to check in with them regularly over the next year.
Also update the BIOS, drivers from the chipset of low level and major embedded and separate
device drivers.Download your applications and devices in Windows 8.1
http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working=========================================================
Don't forget to check the updates of the firmware on the router, because who can have a definite effect
on connections Windows 8.1 same if other OS systems connections are fine.Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
the manufacturer of real device driver updates. If there is no newer versions re - install the same
ones. Ask known in their forums (if any) problems.===================================
General resolution: (after the above if necessary)
Free Wi - Fi and wireless problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Note the use of Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls to the office and use
Win Key activates / deactivates the desktop and start screen.--------------------------------------------------------------
Control Panel - Network and sharing Center - solve problems
References to Vista also apply to Windows 7 and Windows 8.
Your router be guess here, you have successfully updated the firmware a possible
solution? And I would update your WiFi drivers on computers. How far away are they
you have set in the router? Are there obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click
top - tab of the driver - write version - click on update driver (can't do
nothing that MS is far behind the certification of drivers). Then right click on the Wifi
Device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system Maker you can see the same device manufacturer
more recent versions. (Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other update
Drivers Windows 8 like updated drivers.The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
This section-> update the NIC driver).
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsDrivers and Microsoft - Windows 8/8.1 - material
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Microsoft Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceMicrosoft Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
------------------------------------------------------Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - set up a new connection or network
-----------------------------------------------------
And:
TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/Microsoft - Windows 8/8.1 - Web & Networking
http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8Microsoft - Windows 8/8.1 - Wi - Fi & Networking
http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1-----------------------------------------------------
Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slowMicrosoft - Windows 8/8.1 - wired and wireless in Windows problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Someone else has an iPhone 6 with a faulty wifi card?
I had problems with the wifi connection on my iPhone 6 during some time now. The phone constantly drops the connection wifi, carries a low when connected connection and force me to be right next to the router in order to make a connection. I first contacted apple to this topic on December 2015 (2 months after my 1 year warranty) they got to toggle flight mode, toggle the wifi button, reset the network settings, reset the phone completely back to factory settings... I did everything several times and the problem is still there. I was told by a couple of reps on the phone to take the phone to an Apple Store and ask them to help me... So I took the 2-hour drive to the Apple store nearest to say that the phone has a faulty wifi card and it is not repairable. He said the phone had to be replaced, but I was out of the warranty period and I have to pay $299.00 more taxes for a replacement...
Does anyone else have this problem? I'm quite shocked that apple refuses to fix it which is at their end in the form of a defective unit. I understand that it is out of warranty, but it is a problem of manufacturig. These phone cost US $300 more our old phone. I am not able to drop $300 + on a new phone that I feel that apple should be responsible. I have been looking online similar questions and have not yet find something.
Meestee wrote:
Does anyone else have this problem? I'm quite shocked that apple refuses to fix it which is at their end in the form of a defective unit. I understand that it is out of warranty, but it is a problem of manufacturig. These phone cost US $300 more our old phone. I am not able to drop $300 + on a new phone that I feel that apple should be responsible. I have been looking online similar questions and have not yet find something.
Millions of this model were sold. It is likely that someone else has had a problem with their WiFi card.
I think you don't understand quite what than a guarantee. It covers all defects or failures of discovered components during the warranty period. If the phone has a two year warranty (as it would have if you had paid for AppleCare +) you would still be covered. But, if the WiFi card failed after 26 months, it would not be covered. As you are now about six months outside of your warranty, I don't know why you would expect Apple to cover a problem that you don't yet report to them until after that the guarantee was already more. You just wait for Apple to cover the failure of a component for as long as you have the phone?
-
I want to replace the Wifi card, and I have an already is: Intel dual band wireless AC 3160HMW
It works on my laptop?Hello
Your machine was built before 2014 mid, the opportunity to upgrade to any wireless card outside of the following list is very thin:
Support for the following formats of WLAN:
● Realtek RTL8188EE 802.11bgn adapter Wi - Fi 1 x 1
● RT3290LE of Ralink 802.11bgn 1 x 1 Wi - Fi + 4.0 BT Combo adapter
● Mediatek MT7630E 802.11bgn 1 x 1 Wi - Fi + adapter Combo BT4.0
● Intel-N 7260BN 802.11 bgn 2 x 2 WiFi + BT 4.0 module combo adapter WLAN WIDI support
● AR9485 of Qualcomm Atheros adapter Wi - Fi 1 x 1 802.11bgn
Intel Smart Connect technology 4.1
Screen wireless (live) supportIf you really need ac card, please try:
http://www.OfficeWorks.com.au/shop/OfficeWorks/c/technology/Networking/Wireless-USB-adapters
Kind regards.
-
Satellite A110 - switch WiFi does not work with the new WiFi card
Hello everyone
I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.
New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.
Help, please
Hello
Do you have also enabled the WLAN functionality by pressing FN + F8?
Check it!In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop. -
HP Pavilion g7-1260us: I need a new WiFi card! What works for me
I really need a new WiFi card that came with my computer is terrible, I need one with the support of dual band, and I would also support bluetooth as well. But Ive been told that a white list in the bios allows me to.
Ive been resembling different wifi cards and I have the Intel 7260.HMWG network. R
Wil this work for me if I install it?
If not can you tell me another powerful Dual Band (and bluetooth possible) Wifi card?
my computer is HP Pavilion g7-1260us
BIOS: Insyde F.66
You have been informed correctly. There is a white list of BIOS. You can use the wifi cards on page 26 and 27 of the manual here:
-
p6717me-m: map graphic and RAM upgrade compatibility
Hello
I have a HP p6717me-m, running a Nvidia GEforce405 and 4 GB of RAM by default. Im a gamer and mainly using the pc to play games like Counter strike: global offensive. But I am only able to run the game in low details ultra and still get only 30 fps if I'm lucky. That is why the I'm looking to upgrade to the pc to get more fps. I would like to know which components of the pc should I be upgrading for better fps. Ive been told that it is the graphics card and RAM that should be upgraded by friends. If, therefore, what is the best graphic card and RAM interchangeable compatible with this model? Pls help... Thank you.
djbboii wrote:
Hello
I have a HP p6717me-m, running a Nvidia GEforce405 and 4 GB of RAM by default. Im a gamer and mainly using the pc to play games like Counter strike: global offensive. But I am only able to run the game in low details ultra and still get only 30 fps if I'm lucky. That is why the I'm looking to upgrade to the pc to get more fps. I would like to know which components of the pc should I be upgrading for better fps. Ive been told that it is the graphics card and RAM that should be upgraded by friends. If, therefore, what is the best graphic card and RAM interchangeable compatible with this model? Pls help... Thank you.
Here's the product specifications for the HP Pavilion p6717me desktop PC. Based on the specifications, there are 3 things that you could upgrade to improve the performance of your game (and global). I have them listed in the recommended order.
1 update RAM: your unit comes with 4 GB of RAM, you should move it to 8, 12 or 16 total (16 GB MAX).
2 GPU (video card) update: I highly recommend the upgrade of your GPU. You can get any PCI Express x 16 card which physically fits in the slot. The only limitation here is your power supply (PSU) offering only 300W of power. Most of the best graphics cards require a minimum of 450-500W of power. The power supply is a standard ATX power supply, so you should be able to upgrade easily if you want to upgrade the video card.
3 update CPU: your device comes with an Intel i5 CPU and it could be upgraded to an i7 processor. Models and information are listed in the connection of the plug above.
Maybe you are looking for
-
Hi, my laptop, Toshiba Satellite C660-1RR, has terrible problems. First of all, the blue screen (BSOD) appears, and then the laptop stops or restarts again and again. Then closed, it only opens after hours later. When turned on, it only lasts for 5 m
-
Monitor changes in the value of a variable in a module of code labview TestStand?
Hi all A code in Labview module called from an action step has a particular variable that changes its value when running vi. Is it possible to monitor these changes through for example a local variable in TestStand and display different values on UI
-
IntelliType proIntelliType pro
-
Picture shrinks down during the back navigation
I have an app where I need to connect. My connection box is an image that is defined as a backdrop to a container. In addition, I use the label and textinput components. I use margins to hold the image in the center of the page. Wen I first put the a
-
'the Setup installs devices' worked for two days now...
recently reformat the hard drive and I'm trying to reinstall windows by using the oem disks that I created after the purchase of this pc. Installation happens to the devices screen and sits there. the system seems to work because I see the "heartbeat