Envy 15 k233ca: memory upgrades and hhd

Similar Questions

• HP Envy 850-065SE: memory upgrade problem

  HP computer: Envy 850-065SE (memory 4 locations)

  Memory: G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 2 * 16GB

  I just bought 32 GB (2 * 16) G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 memory to upgrade my HP desktop computer (model 850-065SE of envy). My office has a HP mother 2B3A and i7 - 5820 k and HaswellE chipset. The memory of the plant is of Samsung brand with configuration DDR4-2133.

  When I replaced the memory of samsung (trademark) with G.SKILL ones, the computer cannot start with black screen. When I've switched back to factory memory, the computer is back to normal.

  That means G.SKILL RIPJAWS V 16 GB memoryis is not compatible with this HP computer motherboard? or upgrade the BIOS can solve this problem? or do I return these memory and get 8 GB * 2 instead? Your comments are much appreciated.

  This model is limited to only 4 GB and 8 GB modules in the slot.

  B21 HP

  CL15 - DIMMs, 4 GB, PC4-17000, 798033-001, DDR4 COMPLY_2.07

  CL15 memory - DIMM, 8 GB, PC4-17000, 798034-001, DDR4 COMPLY_2.07

  You can buy online modules of 8GB.  Look at the technical on this point.

  https://www.CDW.com/shop/products/Kingston-DDR4-8-GB-DIMM-288-pin/3912220.aspx#Po

• TouchSmart HP Envy 15-j122ea: RAM upgrade and compatibility

  I was looking to upgrade my RAM and I was wondering if those that are compatible with my computer:

  http://www.Newegg.com/global/UK/product/product.aspx?item=N82E16820104477

  Thank you in advance!

  Hi @MiroslavMarinov,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j122ea and research of compatibility and upgrading RAM. Hereis a link to your page 47 for compatible memory manuals. I see that the specs are the same and you have a maximum of 16 slots for 2 x 8 MB RAM. Your choice should work just fine.

  I hope this helps.

  Thank you.

• HP Envy 15-as027cl things: HP Envy 15-as027cl memory upgrade things

  Do you have things HP Envy 15-as027cl supports two HARD + SSD memory drive?

  See above. I said this:

  If it comes with a m2 only, it won't have a caddy hard drive and cable, and those who are very difficult to locate.

  If the answer to your last question is 'no '.

• Question about memory upgrade and warranty - Qosmio G20

  I'm looking to upgrade the RAM in my Qosmio G20, but if I buy little ram in a store and fix myself (replacing the old RAM) void my warranty? (it is still covered by the extended warranty now)

  Don t worry! You can upgrade the memory and the guarantee will be cancelled not!
  You can do it yourself. It is very easy and I presume that the detailed statement is in of the Qosmio G20 user manual.

  Best regards

• T60: disk and memory upgrade and OS reinstall

  I have a T60 1951-CZ1, 2 GB of RAM, 100 GB HARD drive.

  I need to upgrade the max memory as possible and replace with a 320 GB or 500 GB HD. What are the supported elements that I need to order?

  Also I have to re-installed factory OS WIndows XP Professional. How to do this?

  I've traveled a lot of messages and lenovo support pages, but I couldn't find a complete answer

  Thanks in advance

  After all, it's easy

  I finally solved it

  I bought the upgrade memory and a new drive

  I ordered the 1 + 5 rescue & recovery and product recovery CD

  I reinstalled the XP Professional factory (rescue and recovery disk is not explicit about the possibility to reinstall on a new drive, if the precedent was broken, but finally I found the way)

  I did all the updates through microsoft software updates site

  Thank you all for your suggestions which lead me to solutions

• HP ENVY Notebook m6-1105dx: question to DDR3L DDR3 memory upgrade

  I have a laptop of HP ENVY m6-1105dx.

  I would like to upgrade from 1.5V to DDR3L 1.35v DDR3.

  Is this possible without damage to my laptop?

  Thank you

  Joan

  The upgrades only to memory that can be made to your laptop is installation of memory modules that are guaranteed compatible by a manufacturer of memory.

  Your laptop is not like a mother gaming for a desktop computer. You are limited to the settings "protect me from myself" available in your BIOS. You cannot change the tension of memory to allow the motherboard to accept other modules of memory. Installation of memory with others that the specifications published by HP or other than guaranteed compatible memory modules will probably reward you with no experience to have fun a non laptop startup.

  That said, I recommend you do a search on google for HP ENVY m6-1105dx memory upgrade. Stick with well-known brands to avoid surprises.

• HP ENVY Sleekbook 4-1000en: upgrading memory on ENVY 4-1000en

  Hello

  Since I have some basic computer knowledge, but I want to be sure before you go for it, I need your advice.

  I have a HP ENVY Sleekbook 4-1000en and I have recently upgraded to HDD and the OS.

  I think the upgrade of RAM have, as far as I know that you need 2 memories of the same type, so I guess I can't buy an another 4 GB right?

  Do I need 2 x 4 GB of DDR3 memory, of the same type to make it work? For example they would work very well

  http://www.corsair.com/en/vengeance-8gb-high-performance-sodimm-memory-upgrade-kit-cmsx8gx3m2a1600c9 ?

  Finally the upgrade memory requires any other configuration after plugin in? Is a format for example?

  Thanks for your time.

  Hello

  The following link shows the specifications of your computer:

  http://support.HP.com/us-en/document/c03362810

  It has 4 GB of RAM now. The question is 4 GB in a dwelling or in the two slots (2 + 2).

  b in the case of a home, you can just buy another 4GB with SAME part/characteristics of the EXISTING RAM and install in the second slot.

  (b) if in 2 slots (IE 2 + 2), then throw them both and buy 2 new sticks 4 GB each. Agin use even care.

  You don't need to format RAM. Moreover, we have only to format HDD/SSD but not RAM. And Yes, push in the two slots must be same same specs even marks to be able to get all the benefits.

  Kind regards.

• 700 - 281eo envy: RAM upgrades and guaranteed

  Hello!

  So I have a question regarding the upgrade of my computer.

  I recently had a problem when it comes to my RAM. It seems that 8 GB of RAM is not enough, that I use my computer for (mainly play games etc...), as I had many accidents because of the low amount of available ram (for example 4 Fallout, which uses almost all of it).

  So my question is: if I have the RAM on my computer upgrade me a 16 GB Kit, my warranty is void? And would do no matter what kit of RAM, or I have to use strips of crucial ram?

  Also on the side in question, if I decide in the future to update my graphics card to a GTX 1060 (which uses 70W less than my current 270 R9) that manages the more wins.

  Thank you for reading!

  @Robert_B

  Adding memory wouldn't void your warranty. "Unless you break something, do the upgrade".

  You can use any memory manufacturer provided they meet your specifications.

  ● 204-pin DDR3-DIMM

  ● DDR3 PC3-10600 (1333 MHz) SDRAM memory

  ● Unbuffered non ECC DIMMS (64-bit)

  ● 1, 5V dead memory

  ● 16.0 GB maximum installable memory help

  4 GB modules. Actual available memory that

  can be used in Windows will be less.

  Your upgrade and Service Manual here.

  http://h10032.www1.HP.com/CTG/manual/c02871896

  REO

• RAM upgrade and Satellite A200 - 19K graphic card memory:

  Hi all

  The Satellite A200 - 19K came with 1024 MB memory system. It's only 2 cards of memory of 512 MB or just 1 memory card 1024Mo in the system of the laptop? I would like to add another a 1024 MB of RAM, is that the slot more be available?

  The second question is on the graphics card from NVIDIA. The product specification mentions the graphics adapter as below...

  Manufacturer: NVIDIAî
  type: NVIDIAî Geforcea? ¢ GB 7300 supporting Turbocachea? ¢ technology
  memory: 64 MB dedicated VRAM (up to 335 MB of total available graphics memory using Turbocachea? ¢ technology with 2 GB of system memory)
  memory type: DDR video RAM (resp. video RAM DDR and DDR system memory combined)
  connected bus: PCI Express 16 x

  My question is, after upgrade from 1024 MB to 2048 MB system memory, is that the card NVIDIA GeForce will be automatic upgrade from 64 MB to 256 MB for graphics memory?

  TAHNKS A LOT!

  Hello
  >, It's only 2 cards of memory of 512 MB or just 1 memory card 1024Mo in the system of the laptop
  I think that the laptop came with a module of memory 1 GB and the second Bank should be free.

  Now something about the graphics card.
  Well, the graphics card GeForce Go 7300 supports own graphics memory 256 MB (no shared memory!)
  But it also allows a dedicated memory.
  This amount of memory is variable and depends on the available main memory.

  I think that everything runs automatically and you will not need to change the settings to assign this memory dedicated after main memory upgrade

• Envy 15 t-j000: upgrade of 15 t-j000 to win 10 and new SSD at the same time

  Hello

  My cell phone is 8 GB, 1 TB with the 24Go running Windows 8.1 MSSD.

  I want to upgrade to 10 windows, but do not want to 'upgrade' this particular configuration.  What I would do is update my 16 GB ram and my HD to a 1 TB SSD.

  (1) upgrade to 16 GB means that I can't use the WSSD of 24 GB than anything more correct?  I guess if I upgrade the essential motivation for one SSD I more need for MSSD. Or is - that's a good idea to upgrade the WSSD to 32 GB then the swap file on a drive "distinct"?  (is this obsolete technology, old school board?)

  (2) is there a way to download Windows 10 and burn on a DVD or USB installation and then install "fresh" of without first upgrading my mechanical drive Windows 8.1?  The reason is, I'm a student, I can't have my laptop down for awhile so I can't afford a 1/100 chance I'm going to kill my laptop and Miss assignments.  I think if I start the upgrade and have problems, I can put the old drive, remove the extra memory and get until I can afford more downtime.

  Anyway, any help on this is appreciated.  My computer works very well for being a 2 years, so if I can't do it a bit without pain, I'll go ahead and leave it as what.  Thanks for any idea you may have.

  The clean install with Windows 10 will require that buy you it and the upgrade is free, updates and I did probably 15 to 20 of them, went virtually flawless for me. If you clone, just do a "sizing" of leave and small differences will be accrued.

• HP ENVY 750-177c: I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected.

  I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected from the motherboard.  They have loops at the end of the wires that look like they might slip on the pins.  The wires connect to the upper part of the box of the computer.  Where to reconnect?

  Find this card in your system. It is the M2 half-bridge Wireless card.  The other end of the wires must always be fixed.  There are 2 heels left and right of the '2 '.  If everything is correct, it is your physical WI - FI antenna. Just re - stick inside the case.  The small clips are used for an external aerial connection.

  

  PS<> have a good day...

• New PPr upgrade and memory problems now

  I upgraded my version of PPr CC 2015 20 days ago and I went back to make a project that I had previously worked on and made more than 3 weeks. Now, it will not be made and the computer is just running out of memory and encoding is abandoned. I am on Windows 7 with a 2 years old i7 processor and have been able to use the first Pro CC 2015 without problem until the upgrade to the latest version that came out about 20 days ago. Are there bugs that are being developed here? Thanks for any info. I had the project made out by removing all effects to make sure it was a memory problem and quite sure the file render out with effects off the coast. However, I could make with effects on before this update.

  Thanks for you response Brian.

  Can you remove the effects of light and then give it a shot? Effects of light seem to be common with those who have reported this problem.

  Thank you

  Regalo

• Satellite L10-117 and memory upgrade problem.

  I installed the module of ram kingston 512 MB dedicated for my laptop and my system does not start. Laptop does not see its partition with windows. I tried to salvage the dvd system and he does ' t help. Recovery is going ok but after restart problem is the same. I also tried to install this memory module 256 MB (factory installed), and then my black LCD screen and the computer won't shut down. Akku only delete help to extinguish.
  I tried all combinations of this module in the memory 1 and 2 location.
  I use 1.8 BIOS and there I see almost empty memory.

  Hello

  If you start the unit with the original just module becomes so everything ok?

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301