ENVY 15 t-K100: whitelist Wifi of the ENVY 15 t-K100

Hello

I have a HP ENVY 15 t-K100 and I just want to update my wireless card, AR9485 isn't really enough. So where can I find a whitelist? Can I use AR9380? Thank you very much!

It all depends on if your laptop has a white list. If you already have this wlan module, you can try, but otherwise just go with the intel one since it is proposed in the manual.

Tags: Notebooks

Similar Questions

  • How to restart WiFi all the time

    A faulty WiFi flex cable causes the WiFi on my 13' mid-2012 Macbook Pro to stop working. A stop and restart are going to re-establish the normal functioning of WiFi. Once the WiFi doesn't work, it no longer responds to the network manager in system preferences. Can I reload WiFi from the terminal and avoid having to stop. In the end, I will replace the cable defective, but by then...

    http://www.Cyberciti.biz/FAQ/Howto-restart-airport-wireless-from-bash-command-Li not in macosx.

  • Drops of WiFi at the horizon stream

    Hi guys,.

    Since I discovered that I could watch tv on my laptop via horizon tv (my internet service provider, Ziggo tv streaming service), I use it. I listen to in safari via a Web page. Safari is updated.

    But, when streaming and working on something else (another Web page, look at a picture with preview, or work with adobe [illustrator or photoshop are the worst]) guard down my WiFI. The symbol of wifi in the right corner just "cast" (so no connection to WiFi networks, not whether bars). It takes a few seconds and then it reconnects again, only to fail again after half a minute or so.

    As you can imagine, it's very, very, very frustrating.

    I have swapped the switches and wireless access points, changed the WiFi preferences (channel and others, checked with the diagnosis of wifi to find the best channel etc.) and I tried other networks within my main network at home (we have a total of 2 wireless access points on the top of our main router because it cannot reach the whole House). Nothing seems to work. The cisco wireless access points, switches are ubee modem and netgear. The main router is looking for a (rather daunting) Netgear.

    My wifi access point is connected to a 100mbit switch that is directly connected to the main router, which is connected directly to the modem.

    But, since the rest of my devices seem works fine when I hear something, I think it has something to do with my laptop.

    Which is frustrating, because it is relatively new and a major update since my last macbook.

    I have a new macbook pro retina 13 "(bought last December) with the following specifications:"

    2.9 GHz processor
    512 GB hard drive

    • 2.9 GHz dual-core Intel Core i5
    • Tot Turbo Boost 3.3 GHz
    • 16 GB 1866 MHz LPDDR3-geheugen
    • 512 GB PCIe - flashopslag1
    • Intel Iris 6100 graphics card

    In addition, I use an external monitor via VGA and displayport.

    So I really hope that someone can help me, maybe it's some file processing streaming on my mac which interferes with the WiFi when I do more than a simple internet browsing? Because the question does not pop up when I'm streaming something AND work on something at the same time (often reloaded webpage, a program "heavy" like that of the suite adobe)...

    Thanks in advance.

    Hold down the option key while you click on the wireless icon in the menu bar. You can screen geta that looks like this:

    What values do you want to show to the PHY mode and channel?

    What are the RSSI / signal strength?

    What emission rates?

    very important and how many other networks do you see?

    .

  • WiFi falls frequently, must turn off wifi to the computer, then turn on

    Greetings,

    I have four Macs, all the different models and with different OS, with El Capitan and this happens on all. I have an Airport Extreme router, aged about 1 1/2 years. Throughout the day, wifi doesn't work. To get to resume, I have to go into menu wifi on the computer, turn off wifi, then turn it back on. This example gets going again.

    I tried using automatic channels as well as various specific channels on our Airport Extreme. I also have 5 GHz and 2.4 normally. I, of course, restarted a gazillion times (this has happened for about a year). I still have to find a solution.

    Suggestions?

    Thank you!

    Amy

    It is possible that you have a faulty AirPort base station, the other thing to ask is: do you live in a place with a lot of other Wi-Fis operating? As an apartment or condo complex... or a dorm student perhaps? Connectivity spotty Wi - Fi is usually associated with some sort of interference of a Wi-Fi connection. Other Wi-Fis in the close vicinity would be a major culprit.

  • Unable to connect to websites using safari, although my wife use the imac, which has a separate login id can?

    When I open Safari from the dock it shows as usual, but when I try to connect to it looking for Web sites, it does not. can't display preferences etc either. Also, my wife uses the Imac and has a separate login ID and its works very well for her. Worked ok until the end of the week. Any ideas how to fix? Have tried to install the latest version of Mac OS X, but nothing helps.

    What version of Mac OS X is installed, your profile shows 10.7 but I suspect that it is not correct.

  • No wifi on the third floor

    I just bought a nighthawk r7000. My modem is currently located in the basement and the router is there too. I can't take him up to the main floor without rewiring. What are my options to get the wifi on the third floor? I don't not even a signal week up there.

    You could try power line adapters. You will never have decent passage.

  • T430 cannot connect to WiFi unless the battery is removed and then re-installed

    Had trouble with t430 a colleague. It is impossible to connect to the WiFi unless the battery is removed and then reinserted. Once connected WiFi is strong and reliable. This seems to have started a few weeks without any notice. I think of a power setting? I also tried to replace the battery and the same problem. The two batteries hold high loads and are in a State of 'good '. Any suggestions?

    Solution has been update power settings to the driver does not allow the computer to turn off device to save power.

  • NumberSync activate on my number but no wife on the same account 9.2 iOS, iPhone 6

    Just my wife and my phones updated iOS 9.2, the two iPhone on AT & T 6.  I was immediately able to activate support for Numbersync under Wifi calling on mine and then was able to add Wifi calling for my Apple Watch, but when I updated the phone to my wife, who is a different on the same number account of AT & T, she had no option for her and also no option to add Wifi calling on his app shows.

    I tried the Wifi toggle, the call and the restart of his phone.  No luck. Can anyone help?

    THE FIXED!  She became an available option until I went to settings > General > about. Once there, he told new carrier, accepted, settings and the option appeared after that under settings > phone > Wifi calling as expected.

  • Can I use your Apple TV when I do not have a modem, and I use the Wifi in the hotel room?

    Can I use your Apple TV when I do not have a modem, and I use the Wifi in the hotel room?

    Thank you!

    Probably not, but depends on the hotels wifi access. most of the hotels that I stay in you will have to "login" via web browser and the ATV doesn't have access to any browser...

    your best bet would be to broadcast directly from a mobile device connected to the tv in your hotel via a HDMI adapter...

  • Dungeon of WiFi on the logout

    I use a wireless router to wifi since the long and worked fine on my e bike until yesterday, and the same router works fine on other devices. On the e bike it keep disconnecting in seconds and forget the password. I can connect to other networks wifi of the same e bike, please help me to connect to my wifi at home.

    Sun

    It was entirely because of McFee WiFi security. When I turned off and then the problem is solved, now no problem WiFi connection.

  • OfficeJet 8710: How to turn off WIFI on the printer HP 8710

    Just bought a new printer HP 8710 for use of college, but due to college rules I need to completely disable the wifi.

    How is the best way to do it?

    TKS

    amsoilguy

    Amsoilguy wrote:

    Just bought a new printer HP 8710 for use of college, but due to college rules I need to completely disable the wifi.

    How is the best way to do it?

    TKS

    amsoilguy

    The best way to do this is to download the manual and read.  On page 103 is your answer.

    Enable or disable the printer WiFi
    On the printer Panel blue wireless light is lit when the printer WiFi enabled.
    NOTE: Connecting an Ethernet cable to the printer automatically turns off the wireless feature and the
    Wireless lighting.
    1. in the printer control panel, press or drag to the bottom of the tab at the top of the screen to open the
    Dashboard, press (wireless) and then press (settings).
    2. touch wireless settings.
    3. tap on activate or disable wireless.

  • My wife is the administrator user and she forgot her password and she did not save what we can and there are only standard users on this PC, what can we do?

    My wife is the administrator user and she forgot her password and it does not back up and there is only standard users on this PC, what can we do?

    If your wife was using his account with "computer administrator" privileges, and then use the built-in account named "Administrator".

    By default, the built-in account named "Administrator" doesn't have a password.  If you have XP Pro, you can access the administrator account (with no other connected users) Welcome screen by pressing CTRL + ALT + DELETE twice to bring up the "classic" logon window  Enter the administrator user and leave the password empty box.

    In XP Pro or XP Home, you can access the administrator account by restarting mode without fail (repeatedly press F8 to leave immediately after the computer starts / restarts; if you see the Windows logo, you waited too long and you will need to try again).  Once Windows starts in Mode safe mode, the administrator account will appear on the Welcome screen.

    Once you are in the administrator account, go to control panel > user accounts to reset the password of an account with "computer administrator" privileges or create a new user account with privileges "computer administrator."

    If the password that you lack to the built-in, ' administrator' account politics of Microsoft for these forums forbid us to provide you with any information that might help you to bypass this password.

  • in my windows xp desktop computer that I can't connect to wifi on the 4th floor looking for the LAN or high speed internet?

    Wen I go on STAGE LAN/HAUTE SPEED INTERNET

    IT HAS 2 TILES:

    1394 CONNECTION

    CONNECTED, FIREWALL

    13934 NET ADAPTER

    AND

    CONNECTION TO THE LOCAL NETWORK

    NETWORK CABLE UNPLUGGED, FIRE...

    REALTEK RTL9138 family PC if...

    HELP PLZ... NO GUD WIV COMPUTERS... FOR IM A TEENAGER! Help! KEEP THE ANWSER PLEASE ENOUGH BASIC XXX

    Hi Irim,

    1. What is the brand and model of your computer?

    2. What do you mean by "unable to connect to WIFI on the 4th floor?

    3. it worked earlier?

    I suggest you to see link and check if it helps.

    Windows wireless and wired network connection problems

  • Connection with WiFi increases the latency of the Wired internet

    Hello!  I use a Zyxel P-660HW-D1 v2 802.11 g Wireless ADSL2 + 4 port Gateway, which offers wired and wireless connectivity.  My office is connected via an ethernet cable.  Whenever I access the WiFi using my smartphone, the latency of the internet from my office rises considerably.  Disabling WiFi on my smartphone returns my office for normal internet latency.  Is it only a matter of sharing the wired ADSL connection and wireless at the same time, or is there a way I can keep the normal latency on my desktop using WiFi at the same time?  Thanks in advance for any help or information you can give me.

    AFRO-CARIBBEAN

    I suspect it is the limited nature of ADSL, but you can confirm this by going to speedtest.net and running a test of speed and during the trial to connect with the phone.  If the DL speed remains the same (or drops) causing problem.

  • A way to keep active Wifi when the phone screen crashes?

    I noticed that, although my wifi signal is lower than we should, it is not randomly drop out. He does, however, is drop out whenever the phone screen will Dim and locks (IE, home struck and then slide to unlock).

    It's incredibly annoying! Is it possible to keep wifi on and connected to what I explicitly disable? It makes the option "synchronize then on the wifi only" totally useless. And I'm on wifi almost all the time. Whenever I open the phone, I expect to be in wifi to do something - not wait for a reconnection.

    Seriously, it is a show-stopper for me. If I can't find a way to keep the wifi between the locks of the screen, I have to exchange the phone for anything else.

    Surgo wrote:I've noticed that, while my wifi signal is weaker than it should be, it doesn't randomly drop out. What it does do, however, is drop out whenever the phone screen goes dark and locks (ie, hit home then slide to unlock).
    
    This is incredibly annoying! Is there any way to keep wifi on and connected until I explicitly disable it? It makes the "sync while on wifi only" option entirely useless. And I'm on wifi almost all the time. Whenever I open the phone, I expect to be on wifi to be able to do something -- not wait for a reconnect.
    
    This is very seriously a show-stopper for me. If I can't find a way to keep wifi on between screen locks, I'm going to have to exchange the phone for something else.
    

    As far as I know, you can tell the standby policy wi - fi to do 1 of 3 things:

    (1) when the screen is off

    (2) never when it is plugged

    (3) never

    You can get these settings by migrating the following steps:

    1. Parameters
    2. wireless & networks
    3. WiFi settings
    4. menu key (lower-left)
    5. Advanced
    6. policy watch Wi - fi

    If there is no other means, I would like to learn them as well.

Maybe you are looking for