Envy 15 t-q400: updates of Windows 7 on my laptop Skylake

Similar Questions

• ENVY 17 t: last update of HP has hosed my laptop

  Hello

  I recently installed several updates from the HP Support Assistant and unfortunately, I can't use some of my applications.  Specifically, I tried to use MODO 902 sp1 (it's the Foundry 3D modeling software) and after double-clicking on the icon my computer freezes and then crashes.  No BSOD, but it just won't load, the interface of Windows becomes useless, except for my mouse I can still move around.  I tried to reinstall the software and even tried a downgrade to an earlier version (MODO 901 sp1) but with the same result.  I tested to see if Pixologic ZBrush 4R7 sp3 works and it loads fine, so I don't know what is happening.  I should note that MODO was working fine before this last update of HP, but I suspect that something got REALLY fubared during installation.

  In any case, I can tell you what updates have been installed in the event log:

  Updated HP Notebook System BIOS (Intel processors)

  Driver and Intel Chipset Installation utility

  Intel Extensions (SGX) device driver software keeps

  Driver Bluetooth Intel for Microsoft Windows 10

  Driver Audio Realtek High-definition (HD)

  Sensor of fingerprint reader fingerprint validity

  Power Media Player

  My specific machine is a HP ENVY 17 t-n100, number of product L8X51AV

  One last thing, when I try to use the HP Web site to identify my machine, it keeps giving me a message to try again, saying that it is not plugged in (which is absurd because it has just detected what kind of HP product that I use).

  Is there a chance that I could somehow push these updates?  The only other possibility I can think of is an update of Windows 10 screwed something since I saw the last time it checked for something again was last night around 11: 30ish or more.

  Thank you for your quick response.

  PS - It's the second question in less than two months since I got this laptop.  The first had to deal with a faulty motherboard which was replaced.  I never had such problems with HP products before (this is my 3rd laptop from them), that I explain why I am surprised by the amount of problems I'm having now.

  Release a little busy last week, but I would like to report this incident as having been resolved.  For some reason, I need to detach my two monitors to my laptop and reset the connection.  I only found it by chance that I had brought my laptop to work to show one of my colleagues the questions I had.  However, everything loaded up and there is no frost.  When I got home, I reconnected my monitors and everything works fine since.  Can't believe, it turns out to be something so trivial, but I guess it was the only way to get the display output working properly again.

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• HP envy 1205dx: no anniversary update of Windows 10 noise

  I just upgraded my pc to windows update 10 anniversary and I have no basis now, my control panel of beats uninstalled and I can't find an update for it to WIN10. hellpppp!

  Hello

  Please try the following software:

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

  Kind regards.

• HP ENVY 15-k163cl: HP ENVY 15 updated to Windows 10, now unable to connect to the network

  I've recently updated to Windows 10 with my laptop (from Windows 8) and remember, Windows 8 was working fine but now that I've updated for Windows 10, I can't connect to my home network.
  
  When I turn on my laptop, it is not automatically connect to my network and when I try to connect from the network settings, I get an error "Could not connect to this network" and I have to wait at least 30 minutes before it automatically logs. After waiting that it works, but my laptop goes to sleep or goes inactive for awhile, it disconnects again and I have to wait
  
  I connected via hotspot and it worked fine, but all of my other computers laptops HP connects very well and they are 10 Windows as well. Only this laptop is upward, so I guess it's a problem with a new driver.

  Hello:

  The only suggestion I can offer would be to install the latest driver for the Intel Dual Band Wireless-AC 3160 adapter - 802.11 and see if that helps any.

  The 2nd driver on the list is W10 x 64.

  https://Downloadcenter.Intel.com/download/25513/Intel-PROSet-Wireless-software-for-Windows-10

• Laptop crashes sometimes after update for Windows 7

  LENOVO THINKPAD SHUTDOWN NEWS FOLLOWING A RECENT UPDATE IN WIDOWS 7.

  * Title *.
  FOLLOWING A RECENT UPDATE OF WINDOWS 7 DURING THE LAPTOP SHUTDOWN HANGS ONCE ON EACH 3 STOPS OR MORE. LENOVO THINKPAD 10 DAYS!

  If you are unable to use system restore to restore the system to a time before the behavior has started, and you cannot uninstall the recent updates, consider contacting Lenovo on the problem.

• HP ENVY dv6 Notebook PC: press the / STOP the envy of hp dv6 7204se do not work after the update of windows 10

  the power button of my hp dv6 7204se envy key do not work after the update of windows 10

  any help on this please?

  .

• HP envy 15 notebook PC: Beats audio not available after update of windows 10

  Hi, I would like to know the characteristic audio Beats that isn't on my laptop anymore, after I've updated for Windows 10 he disappeared and now the audio on the laptop is not the same of course. The quality is worse.

  How can I get it back?

  Thank you

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K

• HP Envy 15 t-j100: Beats Audio does not work after the new update of Windows 10?

  My laptop set to automatically update itself with the new update of windows 10, and after checking my laptop I discovered that the bat sign was gone and uninstalled in my pc. The sound from my laptop has no depth and clarity. Is there a way I could find a driver that has the bat inside Control Panel? Thank you.

  The softpaq driver audio Intel IDT next will install the audio driver and the control panel of beats.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

• ENVY M6 - 1184ca: 8.1 for Windows does not start after the installation of update KB2919355

  Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,

  DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14 

  and then

  DISM / online/cleanup-image /startcomponentcleanup

  So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.

  I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.

  Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.

  When people ask me "What's up?", I always say 'the CAP '.

  So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.

  Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.

• HP Envy 17 t: what size usb drive is necessary for the recovery of HP Envy 17 t 10 (64-bit) Windows?

  I just installed my HP Envy and wanted to set up a recovery disk.  The USB key must be less than 32gigs, but the example has not been updated for Windows 10 the instructions say.  It shows a recovery screen for a laptop of Win8 with the source of recovery like 17 concerts.   Is there a way to check the requirements for the front to accept the HP one time recovery option.  I have a new 16 GB USB key and wanted to make sure that it is large enough.

  Also do a backup image to DVD?   If so, how many DVDs?   The laptop is new and I added only Chrome and some minor programs.  My data files are always on an external hard drive.

  Hello

  Thanks for posting in the Forum from HP Support.

  To be honest, I don't know what size will be that these recovery files are because they can vary from the version of Windows to another. They can vary from a model.

  In my opinion, 16 GB is probably not enough.

  DVDs are usually 6 (6x4.7 GB = about 28 GB) but this can vary from one model.

  This possibility of imbedding maybe once, there are other ways that you can save your system indefinitely.

  This is a free option included in all windows (creating system image, it's free as included in Vista from the outset).

  http://support.HP.com/us-en/document/c03544793

  However, this option requires (e.g. USB HDD) external HARD disk or DVD. It does not work with USB flash drives.

• Downgrade from Windows - 8 updates from Windows-7 Pro-Windows-8 causing of programs; Troubleshooting and problems

  Dear Microsoft community team,
   
  I installed the Windows (27) - 8 and Office 2010 updates yesterday that was recommended in the notifications of security & systems.
   
  After installing these updates (27) in my HP Envy h8 - 1520t PC, my programs said crash and stop and start automatically. This has been a recurring problem with the updates of Windows-8 that I installed in my new PC.
   
  As a result, I am unable to play my favorite games, use applications and have constant program blocks.
   
  I am very disappointed with these problems. I bought a copy of OEM OS-Windows 7 PRO 64 bit and would like to downgrade from Windows-8 to-Windows 7 PRO 64-bit OS. Can you please provide me with instructions to install Windows - 7 PRO on my PC?
   
  I spent countless hours online and search for bugs on the web sites of Microsoft for Windows-8 updates of the anomalies and corrections, with no resolution. HP has no alternative but to contact Microsoft support. I can't find a link email Microsoft support anywhere.
   
  Please help me as soon as possible. Many individuals have downgraded to Windown-8 to-Windows 7 PRO with positive results on their HP Envy h8 - 1520 t PC. I never had a problem with the Windows 7 operating system.
   
  Sincerely,
   
  Paul Ferrughelli

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/downgrade_rights.aspx#fBid=WF8U8JFesYQ

  or

  http://support.Microsoft.com/kb/2832566/en-AU

• update via Windows iTunes 10

  I just bought an iPhone 6 (first smartphone) and it seems that iTunes is the hub of a lot with this phone.  My Mac is running 10.6.8 and I can't update iTunes with it.  I will not update Mac, so I understand that I can't share music, which is fine since downloading music is not my thing.  However, it seems that I have to update iTunes.  We have a laptop under Windows 10 which I think that I can download iTunes (Yes?).  Can I use this to keep my current iTunes?

  Sorry, this has already been addressed - so many messages and I'm not getting a clear understanding as I'm a bit "technically challenged".

  Thank you for any help or advice.

  Yes you can, and if you like and old mac's for her, you can install windows 10 in a virtual machine running osx with virtual box free oracles

• The last time I used identifier apple of my father to the appstore on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to sign identifying apple of my father, but I want

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

• Hi, sorry for my English, my full authorized computers it s, number they say, I have to wait until Dec 12, everything you know about windows update and windows 10, it's a mess, I, lost master of my equipment, I wonder if anyone can helpme how to recover

  Hi, sorry for my English, my number of computers it s, they say full, I have to wait until December 12, everything you know about windows update and windows 10, it's a mess, I, lost my equipment be, I wonder if anyone can help me how to recover my subscription tanks

  also my purchases does not appear in the cloud, I have ' VM a very old usser