Envy 17 3D. What rate of resolution and update the computer should be to look at a 3d multimedia?
I have an Envy 17 Notebook PC, model LW901AV. I succumbed to try anything in 3D view.
My resolution is 1920 by 1080. Is this correct? Same question with a refresh rate of 60 Hz.
In regards to the glasses, I saw no evidence that they are even on. How can I test them?
Thanks a lot for all the help available.
In order to read content 3d, screen refresh rate must be 120 Hz. Glasses does not have ON the indicator, although you should see the glasses change colors when you tilt/flex it in front of your 3d display. I think that should at least tell you that it is something
Tags: Notebooks
Similar Questions
-
Whenever I open the internet now, I get the pop up of the site (s04.cltdra.com) that keeps then open new windows. I've updated my system security, but without success.
Hello
-Did you change on your computer due to which the problem occurred?
-What operating system is installed on your computer?
-What web browser do you use?I suggest you to follow these steps and check if they help.
Step 1:
If you use Internet Explorer 8 with Windows 7, Open the Internet Explorer security troubleshooting utility and check if this is useful.
Step 2:
This could be a case of browser hijacking; Follow the links given below to delete the malicious files from your computer.
What is the browser hijacking?
-
Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!
Hi ipitedafoo,
You can check if this article helps.
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
See also:
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
-
What exactly is Adobe and why my computer it need?
What exactly is Adobe and why my computer it need? And while im asking what did the java? Why is it always up to date?
Hello
Adobe do a lot of programs.
Here are some examples:
1. adobe Flash Player
2. adobe Reader.
3 adobe Air
4 adobe ShockWave Player
etc.
Google or Adobe will help with that.
For Java, read this:
http://en.wikipedia.org/wiki/Java _(programming_language)
See you soon.
-
Original title: day after my laptop was vista2012 virus
my laptop was vista2012 virus, I managed to get rid of him remove the registry concerned (that I found on a website), since then im even worse problems. program what ever I try and open the request for the program to open with, and even internet Explorer does not work? I tried restoring the system from the back to the top, but they have been erased any help?
Hi Jarnold55,
Method 1: Run the fixit available in the article below and then check if it makes a difference
When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
http://support.Microsoft.com/kb/950505
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in WindowsMethod 2: Run Microsoft Security scanner (MSS) to remove the infection rest of the computer
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: Infected files can be deleted from your computer; There is a chance of data loss.
-
What is booking soft and hard reservation, where should I set?
Hi all
What is booking soft and hard reservation, where should I set?
Thanks in advance.
A flexible reserve produced expected and can be unreservedly. A tough reservation is retrieved.
-
I got a new lens a Carl Zeiss and now in lightroom I lost resolution and all the information of the camera when I post a picture! The camera is a Sony a7R can you help me?
Look at the base this workflow
-
How and when the computer turns off automatically?
Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.
This is great... .buth how and when the computer turns off? When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?
Hello allan299,
Thank you for using communities of Apple Support.
According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.
You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.
Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:
OS X Yosemite: energy saver Preferences
OS X Yosemite: set sleep and wake up on time for your Mac
OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep
Best regards.
-
Is it possible to reset the date of the last virus and update the spyware definitions in XP?
I have xpsp3. I was looking at my calendar to find out what day of the week, an event that happens in November, and unfortunately I forgot to go back to the date of the day before I have updated the definitions of viruses and spyware on MSE. Now, MSE think my latest definitions of viruses and spyware are obsolete, because they were supposed to be updated three months from now. So my question is: is it possible to reset the date of the last virus and update the spyware definitions in XP?
Correct the date on your computer. Remove the antivirus/malware product and reinstall.
-OR-
To restore before the update, use the system restore. Make sure the date is correct. Update.
Tom Ferguson
-
WMP 11 says connect burner and restart the computer
WMP 11 has just started this problem when I click on the tab burn I it tells me to connect burner and restart the computer
Hello
1. do you get an error message when you try to download files?
2. you have any third-party burning software installed on your computer?
3. do you have Internet Explorer 8 is installed on your computer?Follow the steps mentioned below and check if it solves the problem with Media Player:
Method 1: Run automated troubleshooting who diagnose and fix problems with your CD or DVD drive when trying to read or burn media automatically.
See Your CD or DVD drive cannot read or write media
Method 2: If the problem is new, run system restore to restore the computer to a point before the problem started.
Refer to this article for help:
http://support.Microsoft.com/kb/306084Kind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Media Player opens when I type any key. This started 2 days ago and did the computer virtually unusable. The mouse is however immune to this phenomenon, so I can still use it.
No idea how to solve this problem?
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Do a system restore. Choose at least 3 days ago when you did not have this problem as your restore point.
Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
To sit and wait. The machine restarts when it's done.For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing. How can I save this monster?
Hello
First, disconnect all the external devices connected to the computer, and then try to start and check what is happening. If the same happens, then you can try to start in safe mode and check if you are able to boot to the desktop. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Vista goes to 50% CPU usage and connects the computer for hours after the beginning
Original title: Vista processor
Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start. Cannot run anything with any request of CPU without getting bogged down and crashing. It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU. The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off. Should I just pull the machine and go for Linux, or what? Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse. Is that all I can turn off to get the same performance than, say, windows 3.1? It would be preferable to the current situation. MSCKMA.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.
Is there a COA sticker that is attached to the machine?
If so, check to see what edition and version of Windows machine is licensed to:
COA certificate of authenticity:
http://www.Microsoft.com/howtotell/content.aspx?PG=COA
??
What is the certificate of authenticity for Windows?
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity
Also:
Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012 -
in bulk accumulate in plsql and update the same table.
Hello
I use bulk collect and update the table that I use the slider. This table has nearly 1 million records. There will be problems with my code? Any help is greatly appreciated.
DECLARE
terminate_reason VARCHAR2 (1000);
time_line NUMBER;
limit_in NUMBER;
CURSOR cur_violations IS
SELECT * from abc_table;
TYPE cur_abc_table_type IS TABLE OF cur_abc_table % ROWTYPE INDEX BY PLS_INTEGER;
cur_abc_table_rec cur_abc_table_type;
BEGIN
limit_in: = 5000;
OPEN cur_abc_table.
LOOP
Get the cur_abc_table COLLECT in BULK
IN limit_in LIMIT cur_abc_table_rec;
dbms_output.put_line ('new count is' | cur_abc_table_rec.count);
WHEN OUTPUT cur_abc_table_rec.count = 0;
BECAUSE me in 1... cur_abc_table_rec. Count
LOOP
time_line: = trunc (sysdate) - cur_abc_table_rec (i) .viol_date;
IF (time_line > 1000)
THEN
terminate_reason: = 'NOTWELL. "
ON THE OTHER
terminate_reason: = 'PUSHED ';
END IF;
UPDATE abc_table v
SET
v.pers_terminate_reason = terminate_reason;
END LOOP;
END LOOP;
COMMIT;
CLOSE Cur_abc_table;
EXCEPTION
WHEN no_data_found THEN
dbms_output.put_line ('no data is found in the selection' |) SQLERRM);
WHILE OTHERS THEN
dbms_output.put_line ('another error' |) SQLERRM);
END;
Thank you
KK
What happened when you tried? The sliders were ' for the update of "syntax, so there is no general problem update lines inside a loop of cursor.
The big question you have, it is that the loop is completely and totally useless. What you can do in SQL, do in SQL - not to complicate things with PL/SQL that you don't need.
Maybe you are looking for
-
How to create the alarm system on VI
Hai, I am current made an alarm using LV 8.6. together, I attach a simple VI. How can I do a simple alarm system so that when the measured RMS value exceeds a number that the user can define, a beep will be apear
-
Looking for software for a Canon Rebel XS
Is it possible to get the software from Canon for my Canon Rebel XS? Mine was lost in a move. Thank you!
-
How to adjust the height of listfield?
can someone tell me, how to set the height of listfield? I must add a footer fixed height after him.
-
Strange sync problem blackBerry Smartphones
I always managed to sync my BB PIM (AddressBook) ok since the AddressBook Mac PocketMac Sync Manager and Pocket Informant on the BB Pim. Without taking into account the basic rule of "when it is not broken don't fix it" I played a bit with Spanning S
-
my laptop was arrested at 66% without notification
Asus laptop model x52f... completed one year warranty... without notice he was stopped automatically when just 66% After you open and then, also, stop If the charger is plugged in then work