Envy 17 - j020us Windows 7 drivers missing
Hello
I just bought a HP Envy 17 - j020us today. It came stock with Windows 8 is installed and I have, for my own reasons, decided to install Windows 7 above. Long story short, the installation has worked, for the most part. The only problem was that I was missing some drivers. I searched and found http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/ENVY-17-j020us-windows-7-driver... which was very helpful. However, there's still about 3 pieces of material that is not installed, the drivers with the network controller. I have attached hardware IDS and compatible IDS is available upon request for any "missing" material below. Can someone help me find the drivers?
Network controller - hardware ID:
PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086 & REV_C4
PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086
PCI\VEN_8086 & DEV_0887 & CC_028000
PCI\VEN_8086 & DEV_0887 & CC_0280
Feature 'Unknown' - hardware ID:
USB\VID_138A & PID_0050 & REV_0060
USB\VID_138A & PID_0050
Feature 'Unknown' - hardware ID:
ACPI\INT33A0
* INT33A0
Any help would be appreciated. Thank you
Hello
Please try:
1. network: http://ftp.hp.com/pub/softpaq/sp57501-58000/sp57976.exe
2 validity sensor: ftp://15.217.49.73/pub/softpaq/sp45001-45500/sp45050.exe
3 Please try: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20866
Kind regards.
Tags: Notebooks
Similar Questions
-
ENVY 17-j020us windows 7 drivers
Good afternoon
I recently bought a HP Envy 17-j020us to one of my vendors, but we only run windows 7 in our office
I am trying to load windows 7 on this computer and cannot find drivers available for it, no network cards do not work, neither is really the other devices
anyone has any idea where I can get these drivers?
Thanks in advance
Hello:
Most of the W7 x 64 drivers of this model should also work on yours except the graphics.
For the graphics, first install the Intel driver from the link below.
Then install graphic driver nvidia from the link below.
http://www.nvidia.com/download/driverResults.aspx/68502/en-us
For USB 3.0, using this driver.
Please post the ID of the hardware for the network controller (wireless card) because I don't know what model of card is in this book.
If you don't know where to find the hardware ID, please read the guide at the link below.
-
Windows 7 drivers missing HP Pavilion 23
Hi all I'm looking to do a fresh install of Windows 7 on a HP Pavilion B090EA 23 but miss me the drivers for
Ethernet controller
Network controller
PCI device
Controller PCI simple comms
USB controller
Any advice on where to find the windows 7 64 bit drivers appreciated!It seems that the HP TouchSmart 23-1014 uses the same motherboard as your 23-b099ea and uses updated for Windows 7 drivers. Please use the drivers located HERE.
-
HP Envy 700-047C Windows 7 drivers
Hello!
I found most of the pilots looking through material ID's for this machine, but I have two left that I have no luck finding. The hardware ID are:
PCI\VEN_1002 & DEV_6611 & SUBSYS_90C41B0A & REV_00 - should be Radeon HD 8570 for Windows 7
SEE Solution for problem with HD 8570 on Windows 7
PCI\VEN_8086 & DEV_1C22 & SUBSYS_2ADA103C & REV_05 - SM Bus controller
DRIVERS FOUND: https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20019&lang=eng&OSVersion=Windows%207...
The OS I'm looking for is Windows 7 64 bit.
Thanks for your help!
Finally he sucked and called AMD (since HP telephone support has been no help). They said the map right now HD 8570 is OEM only and since it is not offered as a public card video drivers do not exist for him. I was told to wait a few more months for the card to be released, and then the pilots should be achievable for Windows 7.
Right with you we say Frank thank you
-
HP Envy dv6z-7200 windows 7 drivers
I bought this laptop about a month ago and it came with windows 8. I had many problems of lag with windows 8 specifically the broker store sucking my CPU usage, I also had problems with the mouse causing windows pop up with the operating system. I threw the windows 7, a single usb port worked thereafter, but it was enough to download some drivers networks so I can get on the internet, well then I downloaded drivermax and went to the city. Unfortunately now none of my usb ports work, I have also some bass with my beats speakers and usb drivers and its narration are up-to-date, in my device manager I have pci device, sm and 2 controllers under other devices usb bus controllers, saying they need drivers, windows does not find and pilot says my usb key max are up-to-date the other two drivermax says need to update but I have no more download for awhile, please help?
Hello:
Here are the links to the drivers, I think that you need.
First, install the AMD chipset drivers and restart. You want the first file listed in the page.
This should install it the smbus and usb3 controllers.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Audio: See if it works.
PCI device:
-
HP ENVY 17-J020US: could not find the drivers for my HP ENVY 17-J020US Quad Edition
Hello
I have a HP ENVY 17-J020US Quad Edition and I'm looking for "Intel HD Graphics Driver". The Support page and House HP driver heading the wrong driver and HP support was no help. The graphics card is an Intel HD Graphics 4600. Operating system is Windows 10-64 bit updated since Windows 8.1. Any help would be greatly appreciated... Thank you
I rolled back to Windows 8.1. It's not worth the hassle, but thank you for your suggestions. My main problem was, I couldn't open RAW files in Photoshop using the GPU. This occurred after the upgrade to Windows 10 so I decided to go back because all the drivers that you mentioned, I already had on my system. Thanks again for all your help and Merry Christmas.,.
-
Windows 7 drivers for HP ENVY Sleekbook 6-1126sa
Hello
I have a HP ENVY Sleekbook 6-1126sa. I need to have Windows 7 (not Windows 8). I installed Windows 7 (no UEFI). It's pretty simple. Now I find there is no Windows 7 drivers on the HP support site. HP support site advises to use Windows updates to update drivers or visit the manufacturer's Web site. Problem is I need an Internet connection to run Windows Update but cannot find the Ralink Wireless drivers. Looking for Ralink manufacturers website I find http://www.ralinktech.com/en/ (which States that the Ralink site merged with the Web of MediaTek site and one for pilots redirects to http://www.mediatek.com/_en/07_downloads/01_windows.php). Maybe somebody has an idea which driver I'm supposed to use? Updates of Windows actually work?
Does anyone know if HP intend to provide Windows 7 for HP ENVY Sleekbook 6-1126sa laptop drivers (and indeed any other portable newly acquired)?
Kind regards
Keith
Hello
With perseverance and a bit of research I managed finally to find the remaining Windows 7 drivers (for all unknown devices).
For anyone who needs to install Windows 7 on a HP ENVY Sleekbook 6-1126sa, follow is where I found the remaining device drivers:
1.) Bluetooth controller:
Ethernet controller 2) :
3 + 4) Both Bus SM & USB 3 controller:
http://support.AMD.com/en-us/download/chipset?OS=Windows 7
A device of 5th (simply listed as PCI device) had become available after they have been installed. That ends up being:
5 Realtek card reader.) :
http://www.Realtek.cz/Realtek-download.php?Realtek=RTS5286 & System = 1
Hope this helps someone.
See you soon,.
Keith
-
HP ENVY 1350sf m6: m6-1350sf Windows 7 drivers
I recently bought this beauty from off of Craigslist after my last laptop has declined. I hate all the MS gthings after Windows 7 so I immediately wiped the hard drive and installed Windows 7 Ultimate. Much to my dismay I couldn't find but one or two drivers working Win 7. I searched this forum, but most of the links have been exceeded. Can someone help me find the right Windows 7 drivers for the hardware for this particular model? Or all the less drivers appropriate for Windows 10. This site is not all Windows 10 drivers and Windows Update refuses to find drivers for the missing material.
Hello:
Try the W7 drivers and software of m6 - 1084ca, except the BIOS and firmware files.
Support pages don't seem to work right now (at least they are not for me).
In addition to these drivers, you will need to install the drivers for the AMD chipset from the link below for the smbus and usb3 controllers. You want the 1st listed file. Install and reboot the PC.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
-
ENVY of HP dv6 7352sr drivers for Windows 7 x 64
Hello
I need ENVY of HP dv6 7352sr drivers for Windows 7 x 64. Where can I find? Please help me.
Thank you
Hello:
You can use all the W7 x 64 drivers and this model on your software.
DO NOT USE ANY BIOS OR THE FIRMWARE OF THE ABOVE MODEL FILES
-
Windows 7 drivers for the Envy 17-j050ex
Greetings,
any body can help me to get windows 7 drivers for HP Envy 17-j050ex?
Teboooo
First perform the HP system recovery
Install the new Bios
Driver Windows 7
Please install low top
Intel® Chipset Device Software
Intel Management Engine Interface (MEI) driver
USB 3.0 driver: Intel USB 3.0 eXtensible Host Controller
Intel Rapid Storage Technology
Driver Audio of IDT high definition (HD)
Realtek LAN driver (Local Area Network)
RALink 802.11 b/g/n WLAN adapter
http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64082.exe
RALink Bluetooth Softwaretreiber
http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64156.exe
Windows Update Setup
Intel Smart Connect-technology
HP 3D DriveGuard 6
http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe
IRIS of Intel® and HD graphics Driver 64
Multimedia software
CyberLink Media Suite
http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63340.exe
CyberLink PowerDVD software
http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63341.exe
Software CyberLink Power2Go
http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63285.exe
CyberLink YouCam software
http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63287.exe
CyberLink LabelPrint software
http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63286.exe
Optional
HP SimplePass Identity Protection software
-
Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing
Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing
Hello
I have a Compaq Mini - about 3 years - and the noise disappeared today. The sound icon in the lower right corner of the screen disappeared.
In the device, other devices Manager screen is color yellow as is the Audio on Bus High Definition Audio device.
XP sounds and Audio devices Volume Control Panel tab no. Audio Device.
I think that the driver may be missing? I don't have the start up CD and don't know where or how, download the drivers of its replacement.
Any help is appreciated to get my sound back!
Hello:
This is the page for support and drivers for your laptop.
You can try reinstalling the audio driver XP from there.
-
HP ENVY m6-k010dx Sleekbook - Windows 7 drivers
I have a friend who bought a HP ENVY m6-k010dx Sleekbook with windows 8 on it.
I removed 8 and put on 7. I am looking for windows 7 drivers bluetooth and ethernet but can't find them.
Can someone point me in the right direction?
Hp machine support page lists only the drivers of windows 8.
Hello:
You need this ethernet driver...
You need this driver BT...
-
I need 64 bit Ultimate Windows 7 drivers for HP ENVY 17-J8L28AV
I need 64 bit Ultimate Windows 7 drivers for HP ENVY 17-J8L28AV. Drivers on the website of HP for Windows 7 won't work properly or activate the WiFi on the laptop.
You are the very welcome.
You need the driver for this device...
-
Good evening
Windows no longer starts.
at startup, it tells me:Windows Boot Managerfile: \windows\system32\drivers\sptd.sysstatus: 0 x 0000001Info: windows could not load because a system critics driveris missing or corrupt.PS: my pc is an Acer aspire 7738G and vista under worksFrench
Please click on the icon of language at the bottom of this page to select your language from the list of countries / regions to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the language there, the support options for additional international sites are at the link below:
http://support.Microsoft.com/common/international.aspx
Please click the language icon at the bottom of this page to select your language from the list of countries / regions pour post your question in the language of your choice. The forum you posted is fr English only. If you can't find the language here, additional support options to international destinations can be found by following the link below:
http://support.Microsoft.com/common/international.aspx
Thank you.
-
Missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost). How can I recover my system, if possible? It does not even start.
Do you know when this problem started? Try a system restore to a point in time BEFORE the problem started. Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. Don't forget to check the box to show more than 5 days of restore points. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.
If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html. The Startup Repair tool can repair atapt.sys. You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD.
If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.
If this does not work, try to start in safe mode (click on the F8 key during startup and go into safe mode with network - or using the prompt from the disk, if necessary, several times). Then we will check some of your system files:
Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator (skip thiis step if you use the disk)...
Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228. In a best-case scenario, he'll fix Atapi.sys.
While in the command prompt, type chkdsk /f /r and enter and let it run. It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.
If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / event viewer - type eventvwr and enter, if do it from the command prompt). Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.
I hope this helps. Post back the results of the analysis and attempts to repair if these do not work.
Good luck! Lorien - a - MCSE/MCSA/network + / A +.
Maybe you are looking for
-
Right side of the browser blurred and lines appear
The right side of the nightly build has a serious bug. The right has a blurry text and lines appear on the Mozilla site.
-
Answer me please
-
stretching from the internet connection via a wired ethernet cable
Hello First time poster. I have a netgear R8000 Nighthawk on my 2nd floor. I intend to use an ethernet cable connected to the R8000 and bring it downstairs in my living room. My question is, is - it possible to be able to connect the ethernet cable i
-
Start/stop button doesn't work is not on Windows 7-HELP - GOING CRAZY!
Please help if you can. I'm going crazy trying to solve this problem. Recently, I made some recommended system updates. Part of the update requires that you restart the computer after the updates. My laptop will not allow absolutely not me to put bac
-
Hi all I'm new with the BlackBerry JDE. I want to use the progress bar on the bottom of my screen. I use setStatus (Field) in my screen. It's works. But, I could not delete the field. I have try this delete (Field), but it's IllegalArgumentException.