ENVY 17-j053ea: no sound on TV connected to the laptop via HDMI

Similar Questions

• No pavilion dm1 sound when I connect to the tv via hdmi

  I put the HDMI as audio by default output when connected to the TV and have no sound.

  I've updated the Bios, graphics and driver sound but still no joy.

  Here are the details of the laptop if it helps...

  No. A2D08EA #ABU

  Serial number {removed privacy}

  Display graphics card AMD Radeon HD 6320

  The Windows 7 32-bit operating system

  All sorted now and works great

  After the recovery to factory settings, I tried connecting via HDMI on my main TV (Plasma LG 50PC1DA) and it still does not work... Tried another HDMI cable and still no joy with the sound.

  Tried the DM1 on two TVs (Samsung LE40R74BD of LCD and a Panasonic Plasma TH-42PX8B) and everything worked fine... Was not what anyone defined as default... Just connected via HDMI cable and all was fine...

  Hope this helps other users having the same problem

  Now for a couple of beers

  ATB Kev

• Satellite A300 - 1GC PSAGCE connect to the TV via HDMI on Win XP

  Hey everybody,

  is it possible to connect an A300 1GC with Windows XP to a fullHD TFT via HDMI Port?
  I can't find the drivers for the HDMI port on the Toshiba support page, there is one for Vista, so it is not possible with Windows XP?

  The VGA port can´t normal display solutions-HD 1920 x 1080, correct? (ATI Mobility HD 3650, 1 GB)

  Thx a lot for your help

  Podozyt

  AFAIK for HDMI port you need separate driver. Audio and video signal should be addressed without any problem, but I'm skeptical about obtaining a full HD resolution.

• Display problem laptop computer connecting to the TV via HDMI

  I have a Satellite L500 - 19 X and when I connect the laptop to my Sony's Bravia TV, the screen is constantly restless.

  I tried to change the refresh rate, but that did not help. The HDMI cable should not be the problem, because it works very well with my Xbox. The problem is there for both in dual display and expand options display.

  Someone else has the same problem and found a solution?

  Thank you

  > That's the problem for both in dual display and expand options display.
  And when you see the desktop on the TV only?

• L750 satellite will not connect to the TV via HDMI and stops

  Hello

  When I try to connect my laptop Satellite L750 (a Conia Plasma) TV via a cable HDMI, the laptop screen turns black and becomes immune, while TV records the laptop for a second, but then said no signal. Even when I take the HDMI to the computer, the screen will remain always black, and I end up having to restart.

  I tried all the HDMI ports on the TV and the different HDMI cords without change.
  Other laptops will play on TV without problem and my laptop will join also the other TV more, so I'm completely at a loss as to why the two custom work together!

  Also (not sure if it is relevant or not) but when I press FN + F5 to display output options, the only option available is output to LCD display. Is that means the laptop will connect only with a LCD TV?

  Is it possible to change/upgrade, that?

  All advice from someone who has had a similar problem or help from someone who knows how to solve this problem would be greatly appreciated!

  Thanks :)

  You can use the HDMI out port in connection with all TVs and external monitor which favour the HDMI IN jack.
  The HDMI isn't limited to a certain TV interface.

  The FN + F5 key combination to toggle between internal and external monitor/display (if connected).

  In your case, there is an open question about preinstalled system.
  Do you use the operating system preinstalled by Toshiba or did you change it in the past?

  If you have changed the system, the problem could be linked to the preinstalled graphics driver.

  However, my recommendation is simple:
  First of all I recommend you to reinstall the graphics driver.
  First uninstall the installed driver (do this in Device Manager). Then download the compatible driver from Toshiba UE driver page and perform the installation.

  Now close the notebook. Switch on and press F2. Now, you need to access the BIOS.
  In the BIOS, press F9 to load default settings. After that, press F10 to save the changes and exit the BIOS.
  Now connect the laptop to the TV using an HDMI cable.
  Turn on the TV and then laptop.
  Shortly after, use the function FN + F5 keys to switch to the external video output.

  Good luck!

• Satellite P200 - 1EE, problems of HD - DVD after you connect to the TV via HDMI

  Hello

  Like many others I have read on here that I'm too have problems with playback of HD DVD.

  However the difference for me seems to be that, initially, I was able to read my DVD HD (it was the movie 300 passing) until I tried to connect the laptop to my HDTV via HDMI (it is only 720 p not 1080i). He doesn't have to play with the message "not responding". Now, the HD-DVD will not play even on the laptop.

  Any suggestions?

  I tried to use windows restore without success and also tried to download the update of the driver, as described in other posts, but the download is not completed. (also I can't find an update of the firmware on the Toshiba site)

  Any help is greatly appreciated.

  Thank you
  John

  Hello

  After watching HD-DVD on your TV you have arrested film closed HD-DVD player, back switched to LCD screen using FN + F5 key combination and then disconnected the HDMI cable?

• Presario CQ61 connect to the TV via HDMI on Windows 7

  Hello

  I can't understand how to connect my Presario CQ61 Notebook to a Philips TV HDMI on Windows 7. I checked the settings in the control panel in Windows 7 and put them in several screens. Under the NVIDIA Control Panel, I cloned the views. Nothing happens, black screen on TV with the message "no signal". The laptop is recognizing the TV properly by the way.

  Help, please. I already spent 2 hours on it. Tried various items online, but nothing seems to work. The HDMI cable is OK. I plugged a PlayStation to TV. Seems that it is not a hardware problem, but something with the settings on my laptop.

  Hi @bonbon,

  Thank you for visiting the Forums HP's Support and welcome. I read on your Compaq Presario CQ61 notebook and not able to connect a HDMI monitor. Here is a document on how to connect the TV.

  I hope this helps.

  Thank you.

• U2414H to connect to the PC via HDMI and chaining

  Hi all.  I have two US2414H I am trying to connect to my Dell XPS of 5 years.  The NVIDIA Geoforce GT 740 LP graphics card has only one of each DVI, HDMI and VGA ports.  No DP to all ports.  I managed to connect a monitor with a HDMI to HDMI connection.  The manual says to use cable of DP/miniDP to chain the two monitors together, but I can't get this to work.  I tried switching ends, I plug into which monitor.

  What happens if I got a DP/DP cable or cable miniDP/miniDP, rather than using the DP/miniDP cable supplied with the monitor?

  I begin to fear that, without connecting the monitor 1 via connection DP, I won't be able to Garland.  I'm wrong, or is there a solution?  I'll be forced to install a new graphics card with port of DP?  $$$$$

  I really didn't know that I should be an expert comes to install a COMPUTER monitor.  JSYK, I'm far from being a COMPUTER expert.  Laughing out loud!

  FYI, I was on the phone last night, with Dell technical support, and the representative told me that, without port DP on my PC, I need a HDMI to DVI cable adapter.  I bought one, and it still doesn't work.  Not amused.

  The U2414H has two HDMI ports. Thus, when you open the OSD (On Screen Display) - input Source, you should test both the HDMI listed.

  

  Daisy chain of the U2414H, you need to get a video card with DP or CDM outside.

  In theory, it should work =
  GeForce GT 740 out HDMI--> HDMI to HDMI Cable--> #1 U2414H HDMI in
  GeForce GT 740 out DVI--> DVI to HDMI Cable --> HDMI U2414H #2 in

• How to set the resolution of TV connected to the computer via HDMI?

  original title: new brand lenovo PC, windows 7, connected to my samsung tv with HDMI, screen too large, can not see the button to start clock, icons, etc what do I do?

  I have a new computer Lenovo with Wwhat to do? indows 7; I use a Samsung LED tv for a monitor, HDMI connection.  The screen is too big for the monitor, I don't see the button start, icons, clock, etc.

  Hello

  You can see the following article for more information on monitor display problems:

   

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

   

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

  Let us know if that helps.

• I have an asus k53z. When I connect to the tv via hdmi hd, out of netflix hd images are a bit slow?

  See the topic.

  Hello

  The question is limited to NetFlix?
  Silverlight uninstall and reinstall. Follow the given steps and check whether the problem is resolved.
  Method 1:
  To uninstall Silverlight, check out the link and follow the steps.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  Method 2:
  To make sure Silverlight is completely removed from your computer, visit the link and run the Fixit.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
  Method 3:
  See the link, download and install the latest version of Silverlight.
  http://www.Microsoft.com/Silverlight/
  Method 4:
  Update drivers and check if it helps to solve the problem.
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
  You can also check out the link below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  For more information, you can check this link:
  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV
   
  If the problem persists then post the question here:
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• U2414H HDMI to HDMI connected to the laptop - cannot set high resolution

  I recently bought a U2414H monitor connected to my laptop via HDMI to HDMI.  I am running windows 7 and I am unable to set the resolution on the monitor.  It is currently set at 1366 x 768, the same as my laptop.  Any advice would be appreciated as it is my first external monitor, so I am new to the terminology. With our thanks

  I went to the Toshiba site and it says that the laptop of 2012 is abandoned. I doubt that its HDMI port is 1.4. But the U2414H HDMI is backward compatible with older versions.
  * Turn off the laptop and the U2414H
  * Unplug the computer U2414H
  * Turn on the laptop
  * Turn on the U2414H
  * Connect the HDMI cable to both
  * Right click on the windows desktop
  * Click on screen resolution
  * See you an image with two monitors? One being the U2414H? If Yes, right click on it and choose extend to the U2414H

• 750se envy: envy of the brand new office no signal to the monitor via HDMI

  Just got my new 750se envy and 25 x 25 backlit monitor. After putting it all together, I connect the monitor of the Tower via HDMI. Tower boots, display lights, I pop in setting up the drive, but the monitor says that it cannot find a signal. I test my old monitor to the new Tower (a monitor of series pavilion aged 7 years). Same results. The Tower seems to be the treatment given that you can hear what it read the disc.
  
  I take another hdmi cable and and test exactly as described above. New monitor, new Tower and new hdmi cable still no signal. Old monitor, new Tower and new hdmi cable still no signal.
  
  Just to be sure, I plug my new monitor to my old HP Pavilion desktop computer. Tower lights up as usual, and the new monitor immediately comes to life with color. I can safwly guess it's the tower. I open the side panel and check all jacks to make sure they are warm and fully attached. Nothing seems to be loose or out of place.
  
  I start to sting online for answers. I met this reset of the BIOS. Press F10 to 8 seconds, down, 3 times arrow, enter twice and restart. Nothing. Still no signal. Can I assume there is something wrong with the Nvidia GeForce GTX 960 and windows the cause? Maybe turn hdmi ports are messy? It was the only other subjects I really found on the issue. Everything seems to work, just no signal between the monitor and Tower.

  89kowens

  Since it is a relatively new machine, instead of hurt for hours to fix yourself, why not just let HP repair at our expense!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Good luck

• My Macbook 2012 mid pro with thunderbolt is connected to the tv via a Macally MDHDMI adapter.  Visuals are delivered as planned but no audio.  Can anyone suggest why no noise please?  And maybe a fix?  See you soon...

  My Macbook 2012 mid pro with thunderbolt is connected to the tv via a Macally MDHDMI adapter.  Visuals are delivered as planned but no audio.
  Can anyone suggest why no noise please?  And maybe a fix?
  See you soon...

  Have you checked system-> Sound-> output preferences to see if you can select the HDMI output?

• IPad no charging current after the update to IOS 10, when connected to the laptop.

  My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

  PL suggest how to overcome this problem.

  Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support