Envy 17-n152sa: Envy 17 Usb drivers

Similar Questions

• ENVY of HP dv6-7267ez Notebook PC: USB drivers windows 7 64 bit i7 processor!

  I have the problem with USB drivers on my HP ENVY dv6-7267ez Notebook PC with Win 7 Ultimate x 64.

  I tried this medication but no luck, just can't find correct drivers. None of my nothing detected usb ports.

  Help, please

  Thank you in advance!

  Hello:

  You do not try everything.

  You can use all the W7 x 64 drivers and the software of the dv6t-7000 except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV6-7000-Select-Edition-entertainment-notebook-PC-series/5292557/model/5292558

  The pilot USB3 that you are interested in is this one...

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp56164.exe

  But before installing this driver, make sure that you install this driver first and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp56156.exe

• Envy TouchSmart 20: Need USB drivers for HP Envy 20 which was lowered from Win8 for Win7 64 bit

  I need USB drivers for a craving 20 TouchSmart, which was lowered from Win8 to Win7 64 bit. The Device Manager has the following information:

  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C & REV_02
  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C
  PCI\VEN_104C & DEV_8241 & CC_0C0330
  PCI\VEN_104C & DEV_8241 & CC_0C03

  Thanks in advance to anyone who can help

  Hello:

  This driver should work...

  Texas Instruments USB Controller Driver

  File name: sp70786.exe

• Want x 360 m6 w103dx: could not load on Windows 7 x 64 usb drivers

  I have a HP Envy laptop 360 m6 x. It came with 10 Windows installed which I don't want to keep, so I installed Windows 7 x 64 in a space different than HD, and not all that I'm fine. After understand I had to DISABLE Wecure Boot, I installed Windows 7, and most everything OK, except Windows 7 on this desire x 360 does not recognize my USB ports. I tried looking for the HP sites for chipsets and usb drivers but none will allow me to install them on the Windows 7 operating system. Other sites have said I can't install Windows 7 on this laptop, but it's not true, just that I can not load the USB drivers for it.

  Is this possible?

  Thank you

  Ed

  Hi, Ed:

  Try the USB3 directly from Intel driver.

  Download, unzip and run the setup.exe file...

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• USB drivers for HP50g on Windows 8 (64-bit)

  Hi all

  Has anyone tried installing the USB drivers for the 50g on Windows 8?

  Conn4x installed well but USB drivers comes. I tried all available troubleshooting options using the features of Windows 8 compatibility (XP, Vista and 7) and none of them worked.

  So I was wondering, maybe someone here may have already installed and could share some tips.

  Thank you

  Márcio

  I read messages in other forums indicating that the conn4x and the USB driver peut be installed.

  The post on the forum indicated that Windows 8 comes pre-configured with the possibility for signed drivers enabledapplication.

  In order to install the USB driver, signed driver enforcement must be disabled.

  See this forum comp.sys.hp48 post it here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/win$208/comp.sys.HP48/tzpjXzysXrU/-XZbRLN2CucJ

  Please inform the forum if you succeed, and what measures allowing you to complete the installation.

• Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

  Hi all

  I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

  If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

  Thank you! -Le Cannet

  Here is where I found the drivers (but with no mention of USB drivers):
  [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

  > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

  USB drivers are part of the Windows operating system.
  The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

  In addition, the chipset driver must be installed.

  I checked the proposed link in your ad and here, you can download the Intel chipset utility.
  The update of the BIOS is also available

• Journ.e Touch - need USB drivers

  Can you give me a link to download the USB drivers for toshiba journ.e touch?

  Hi mate

  I think you mixed up something tactile E travel is a plug-and-play device and there is no need of USB drivers.

  You can use a USB cable (available separately) to connect your DAY. E TOUCH to a computer for the file transfer.

  1. when the JOURN. E TOUCH is on, insert one end of the USB cable into the mini USB port on your DAY. E TOUCH.

  2. Insert the other end of the USB cable into the USB port on the computer.

  3. the screen connect to PC is displayed on your DAY. E TOUCH.

  4. once the connection is ready, the computer will recognize the DAY. E TOUCH as a mass storage, displayed as "JourneTouch" in your computer.
  Now you can start transferring files between the computer and the JOURN. E TOUCH.

  5. double-click on "JourneTouch" in your computer. Records music, photos and videos appear under "JourneTouch".
  -In the Photo folder, you will find the records Picasa and Flickr, if you use these applications to upload photos.

  6. you can copy files from or to your DAY. E TOUCH.

  * NOTE *.
  You can access the files in the internal memory of your DAY. E TOUCH from the computer. You can't access the files in the inserted SD card or USB to the computer.

• USB drivers

  Hello, I recently bought a HP PAVILION G6 - 2208AU NOTEBOOK PC with windows 8 after some use I noticed that I don't like windows 8 so I installed windows 7 instead, in doing so, I lost my drivers, I was wondering if someone had somewhere I could recover my USB drivers

  Hello:

  You must install the driver for AMD chipset on the link below. First download listed.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Paul

• Pavilion 15 laptop n200si: missing USB drivers after formatting and reloading windows 7 on HP Pavilion 15 computer n200si laptop

  I recently formatted my laptop and reloaded windows 7 and lost my 2 left side USB drivers and the drver HDMI. I tried several searches but come back to the top with nothing every time.

  I managed to get the driver for the HDMI, but still nothing on the 2 USB ports.

  in Device Manager, USB 2 ports are yellow! in a triangle. I tried to update the drivers from there and on the HP support assistant.

  the hardware for 1 USB ID is:

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2163103C & REV_04

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2163103C

  PCI\VEN_8086 & DEV_9C31 & CC_0C0330

  PCI\VEN_8086 & DEV_9C31 & CC_0C03

  other USB hardware ID is:

  ACPI\HPQ6007

  * HPQ6007

  your help would be greatly appreciated as I need to be able to work with these USB ports and cant gt by just one.

  Thank you and looking forward to the help

  Stuart

  Hello

  The usb 3.0 driver, try the following.

  https://Downloadcenter.Intel.com/download/22824

  The second hardware id is for HP 3D DriveGuard.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71811.exe

  Kind regards

  DP - K

• Update of Windows 8, incompatible usb drivers?

  I use a HP Pavilion dv6-7029tx running windows 7 Home premium 64-bit

  Im trying to upgrade to windows 8 Pro and depending on the upgrade wizard the following programs is not compatible and must be uninstalled.

  * Intel (R) USB 3.0 eXtensible Host Controller Driver

  * Broadcom Bluetooth Software

  It does nothing notable after I uninstall broadcom, but when I uninstall the usb driver, usb ports do not work and nor does my mouse, and I was going to continue with the installation and fix it later, but during a restart (mandatory before you continue the installation of windows 8) windows start and had to do a repair of the startup... after which I have re installed the usb drivers...

  So my question is...

  Is there a way I can go to windows 8 without losing my USB ports or have I just lost $ 20?

  Hello

  Remember to update your drivers to the latest drivers for Windows 8, those that can be downloaded from the links below:

  Broadcom Bluetooth Software - http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5226230&prodNameId=5257464&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-110127-1

  Intel(R) USB 3.0 eXtensible Host Controller Driver - http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5226230&swItem=ob-109954-1&prodNameId=5257464&swEnvOID=4132&swLang=13&taskId=135&mode=3

  Shlomi

• for HP G6-2244sa USB drivers

  I can't find the correct usb drivers for my laptop after windows 8. downgrading to windows 7 home premium. Here are the details of drvice. Thank you.

  Hello:

  Download and install the amd chipset drivers and restart.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do?

  to restart my macbook air early 2015 in windows 8.1 to begin the installation it tells me that usb drivers could not be found, what should I do?

  It downloads everything and restarts in windows 8.1, then when I click on install now a message pops up saying that miss me the disk drivers important that I don't know what to do

  This is an incorrect error message. Please post the exact error message or a screenshot of the error, if possible.

  See also no drivers were found and the reference to AppleSSD.sys.

• HP 15.6 black liquor "-r131wm: im having truble with my usb drivers"

  Im having some trouble with my USB ports both 3.0 and the other usb port two 2.0 do not respond they give a signal of power because they can charge my phone but the OS which I down graded to win. 7 NPT back usb ports that I watched usb drivers and he scored as drivers uninstalled, I ran windows update but that was no good please help I need to get the work done but with output usb port no need im thak you in advance

  Hello:

  Use the W7 x 64 drivers for the HP 250 G2 except the BIOS and firmware files.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

• Compaq Presario CQ62 USB drivers not installed?

  I get these annoying popup messages indicating that he has a problem to install the USB drivers. When I go into the Device Manager there is no exclamation mark next to all of the drivers in question. Here are as follows... 2936, 2937, 2938, 2939 293 a, 293C, 2934 and 2935. When I right click on them and get the drivers it gives me a warning that the new driver has been found to date but the problem install the new driver and I need to contact the manufacturer for a solution. Everything seems to work fine, but these popup messages appear on each startup, and it is rather boring. Any help would be greatly appreciated. Also my computer has been updated to the latest version without any other question.

  Hello:

  See this post.

  http://h30434.www3.HP.com/T5/hardware-upgrades-and/Intel-ICH9-family-USB-universal-host-controller-updates-for-HP/TD-p/741641

  Paul