Envy 17 t-j000 caddy tray support SSD hard drive

Similar Questions

• ENVY of HP TouchSmart 15-j000-series - memory and SSD hard drive

  Hello

  I tried to look at the specifications for: TouchSmart HP ENVY 15-j004eo-computer pc laptop
  (E1S89EA) - but was not able to understand if it was possible to move to 16 GB of memory and replace HD with an SSD

  can someone confrima Traoré, it is possible to add modules memory 2x8gb?

  I think that the SSd is possible, but would like confirmation.

  Thanks in advance.

  Hello

  1 RAM: Yes. You can buy from the following vendor, or use the information to buy elsewhere:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/envy+TouchSmart/envy+TouchSmart+15T-J000-upgrades.html

  2. Yes. You can also buy them SSDS (link, above, up to 960 GB).

  Kind regards.

• Laptop HP ENVY 15 t-k000 CTO: replace the SSD HARD drive in HP ENVY 15 t-k000 CTO Notebook PC

  Hello people,

  I know it took a lot, but I find a hard time to see the correct answer specially for my device

  I have a HP ENVY 15 laptop that has a hard workout 931 GB Hitachi-HGST SCSI Disk Device (SATA).  What are the compatible SSD should I buy to replace this drive?

  Is it good to buy hybrid SSDHD like the seagate one? http://www.Seagate.com/internal-hard-drives/solid-state-hybrid/laptop-solid-state-hybrid-drive/

  Any recommendations?

  Sorry that I've never tested with hardware before however, I wanted to update until the initialization of the time takes about a minute since it has a core i7 intel and 8 GB of RAM.

  Thank you

  Reinoa

  The best consumer SSD there is a Samsung 850 Evo. It will have the same physical dimensions as a hard drive. 2.5 inches wide and 7 mm thick. A 7mm form factor fits anywhere the will of 9.5 mm. The connectors and mounting holes are in the same places so that they are interchangeable.

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E250B-am/DP/B00OAJ412U/ref=sr_1_1?s=PC&ie=UTF8&QID=1442231068&SR=1-1&keywords=Samsung+Evo+850

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Envy of HP DV6 - 7215TX updated 1 TB HARD drive up to 1 TB SSD?

  Hello

  I just wanted to confirm that with the model DV6-7215TX can upgrade its SSD HARD drive? This model has the 32 GB SSD for fast start, then 1 TB HDD. If I simply clone the disk for one SSD same size. Then everything just move them, that's going to work? Or is there a more complex configuration for the raid working between SSD/SSD instead of SSD/HDD?

  Thanks for your time!

  See you soon

  Murdoch

  No doubt an SSD isn't the thing to have and the problem you describe is exactly what would be improved by an SSD... long time linear file transfer. The existing drive to the WSSD is an obstacle, however. The WSSD and the SATA drive is in a RAID array. The BIOS is set to RAID to allow that, and you have no control over the parameter disable RAID in BIOS. If you really want to install a SSD I go into the Intel Rapid Storage console and disable acceleration by the mSATA reader. I have then clone the SATA drive to the SSD drive and replace the former with the latter.

• iMac mid-2010 for one SSD HARD drive replacement

  Hello

  After reflection, (mainly in the meantime my principalement en attendant mon iMac iMac starts!), I decided to replace the HDD with a SSD. After having done some research and I watch YouTube videos, I'm not sure if I have bought the right tools for the job. Could someone please help me and let me know if I'm not on the right track here.

  The iMac in question is a model 27 "2010.

  Here's what I have on order:

  • Samsung 850 EVO 500GB SSD
  • OWC online Thermal Sensor HDD upgrade 2009-2010 - https://www.amazon.co.uk/gp/product/B017OEQKV2/ref=oh_aui_detailpage_o00_s00?ie= UTF8 & PSC = 1
  • Kingston Technology 2.5 to 3.5 inches support and live for SSD - UTF8 & PSC = 1 https://www.amazon.co.uk/gp/product/B00DGL2X7I/ref=oh_aui_detailpage_o00_s00?ie=
  • 2 x cable high quality Original SATA 6 GB/s 3 - Gigabyte https://www.amazon.co.uk/gp/product/B00BBYOD3E/ref=oh_aui_detailpage_o00_s00?ie= UTF8 & PSC = 1

  I also ordered suction cups and relevant screwdrivers.

  I intend to completely remove the current HD and its replacement by the new SSD. Am I right assuming that I will just remove current thermal sensor cable and replace it with the one OWC? I'm not 100% on this one.

  Cheers in advance

  Ian

  Yes, you just remove the thermal sensor and place the OWC in line sensor (the sticker pad can be placed on the support of 2, 5-2, 5 (as the SSD will not have a lot of heat).  The longer a cable must be re-attached the logic board.

  The only suggestion I have would be - it probably need not SATA cables for this-> upgrade SSD HARD drive, thermal line sensor is long enough - in fact, too long that I had to press them to be shaped in the iMac.  Unless you plan to add other SSD in the system, since the iMac 2010 with SATA 2 (3 GB/s speed).

  Good luck

  Sam

• Pavilion g6-2330ee: SSD hard drive

  Hi all

  I have HP laptop Pavilion g6-2330ee.

  My quastion is: my laptop supports the SSD hard drive?

  Thanks to you all.

  Hello

  Yes, he does. Nothing can stop it. Please use ONLY know brands.

  Kind regards.

• Satellite L50 - A-1 DG - with the new SSD HARD drive replacement

  Satellite L50 - A - 1 DG

  I would put my SSD in the PC and install win7 on it. But it does not work.

  I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  I tried to replace the SSD hard drive. Then the pc cannot start up. And I can't get into the bios or adjustment.

  Someone knows what's the problem?

  > I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  This does not work with all models of laptops.
  As far as I know that the laptop must support Slim Select Bay and the BIOS should also support this hardware option. But in your case, it doesn t.

  One possible solution is the use of SOLID-STATE drive instead of the HARD disk.

  You said that you are not able to access the BIOS after these updates.
  Well, before you do this (a SSD drive connection) you should access the BIOS and must disable secure boot and must set the start mode MSC mode.

  The comments appreciated.

• Update a SSD HARD drive

  Hello

  I have a TouchSmart from HP Envy 15-j020eb laptop.

  But it doesn't have an SSD, so I want to replace the SSD HARD drive.

  You can do this without losing your warranty? Or not?

  Welcome them

  Hello:

  See the answer to Q17 on the link below.

  http://h40059.www4.HP.com/warranty/information/FAQ.php#17

• Replace T420s with a new SSD HARD drive

  Hello

  I wonderd if it is possible to replace with a new SSD HARD drive, while putting the HARD drive in the Bay of Ultra-slot.

  And if so, what SSD model should I buy, and how do I transfer the operating system and the data for the SSD?

  This SSD model will be compatible?

  Corsair neutron Series 120 GB SSD Sata III MLC 2.5 inches Retail

  Thank you very much

  Guy

  Yes, what you are proposing is quite feasible. You will need an adapter Ultabay to organize your HARD drive in the Ultrabay housing on your system. These are available from Lenovo, but are relatively expensive. You can get a much less expensive (~ $ 10) a compatible version on eBay. It is not as well finished as the real issue, but it works well.

  The best way to transfer everything on your SSD is "clone" of your HARD disk using a software as Acronis True Image. If your current HARD drive is made by Western Digital or Seagate you can get a free copy of Acronis on their Web site. Put the SSD in the SATA drive Bay and the HARD disk in the UtlraBay. Set the T520 to start from the Ultrabay, install/run Acronis here and make a clone for the SSD. Then boot from the SSD and you'll be all set.

  With respect to the SSD, many people here have had good success with Crucial M4, 520 Intel and Samsung 830. I guess that Corsair works perfectly as well, but I didn't know all messages from people here who have done so.

  Before ordering a SSD confirm if the HARD drive is 7 mm or 9.5 mm thick. Then order the same thickness SSD. This way, you will be able to use the metal rails caddy and rubber who now hold your HARD drive to contain the SSD.

• 17i wanted to replace SSD HARD drive

  I just bought a new screen Envy 17 t tactile image with a 1 TB HARD drive 5400 RPM. At the same time, I bought a new Samsung 840EVO 500 GB SSD with the intention to replace the slower HARD disk with the fastest SSD. I thought it would be a simple switch (I replaced the older drive in my laptop with no problems). I thought it would be a few screws and a small sign removed from underneath the laptop and everything would be made.

  But after I got the new machine, I got everything install and running and left information for the SSD HARD drive, I have everything off and returned the machine and unfortunately... There are no signs (as described in the documentation) that I expected. She only siingle piece!

  How to HARD drive to replace it? Am I supposed to remove all the screws and remove the bottom or top (where the keyboard is) does jump off and you have access from above?

  Help!

  This model requires the removal of the top cover to the hard disk:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c04339451&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0007

  This is not a procedure authorized user and will jeopardize the warranty if something is wrong in the process.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Can I install SSD hard drive in the version of Windows XP Media Center 2002.

  Original title: ssd hard drives

  I have a Sony desktop running Windows XP Media Center version 2002. I am thinging about buying an SSD hard drive. I was wondering if it will work

  Hi Mike,

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand you want to find out if the SSD is supported in the version of Windows XP Media Center 2002.

  What is the model number of the computer?

  Windows Media center supports the SSDS. However, when buying, check with the manufacturer if the hard drive is compatible with Windows Media Center operating system in 2002.

• Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

  Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

  in the case give me the link of a hard disk of type to add

  Hello

  While you can certainly add another HARD drive in the Bay of secondary drive (you must also support and the connection cable) you can't boot from it - only in the Bay of primary HARD drive is bootable.

  Kind regards

  DP - K

• Pavilion G-6 2209au: Pavilion G - 6 2209au exchange for SSD HARD drive

  Hello I have this have upgraded with 6 GB ram and now want to replace the disc for one SSD HARD drive, I read in the forms some how you need to change the bios when you do so, what measures are necessary for the ssd to function? I don't like about backing up files, I'll use as an external HARD drive. Also I have the apu a4 4300 m and would like to get 10 4600 m cpu is this hard to replace or should I pay someone? Thanks for the support

  That's what you have:

  http://support.HP.com/us-en/document/c03551667

  It is the repair:

  Manual

  From the outset I see that you only have 2 GB of RAM. Very easy and inexpensive to spend at least 4 GB. See page 46.

  The motherboard is the motherboard. There is no upgrade available. However, you have the CPU AMD A4 and you might fall into a 10 - 4600M. See page 83. It would be a major update and only would no treatment faster, but would provide a slightly better video chip since it is a "APU" with processor and video on the same chip.

  Finally, you can exchange the mechanical drive to a SSD drive. The upgrade of the speed would be very noticeable.

  That @banhien meant, however, the cost of this can equal or exceed a new laptop. and almost certainly will if you need to pay a technician to do it. The first update I is the RAM, then the SSD and then the last would be the CPU. If you need any help post more come back.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Can I replace the SSD HARD drive in my sve15123cv

  Hello

  I use sve15123cv, I want to replace the SSD HARD drive. Is this possible?

  Which SSD is good?

  Hi zunnun,.

  Thank you for visiting the Sony community!

  It is possible, but we cannot guarantee that it will work without any problem. You need to consider certain things such as the specification of the HARD drive, thickness or dimension of the SSD that you plan to install first. Your Vaio SVE15123CV is a non American model. Unfortunately, we do not have full details and specifications of your machine. However, you can coordinate with the Sony support based on your location or where you bought the device.

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  Hope the link helps.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• External SSD hard drive not detected by Airport Extreme/Time Capsule

  Hello everyone, I have the following problem:

  Framework

  -J' bought a 1 TB Samsung SSD 840 EVO internal media.

  -He is locked in a case of badges and used as an external hard drive

  -J' have an Airport Extreme (5th generation)

  -J' have a Time Capsule (4th Gen)

  -My MBP detects the SSD external hard drive when it is connected to the USB port and works fine

  Problem

  -I connect the external SSD hard drive to the USB port on both TCapsule and AExtreme, but the HD is not detected directly (USD and with powered hub of USD)

  -HD was formatted as OS x journaled Extended

  -J' tried smb and cifs via 'connect to server', but does not work.

  Any help will be greatly appreciated.

  Juan

  Unfortuantely, Apple did not update the firmware on the USB key (it is still 2.0) port on their routers for a number of years.  As a result, new USB 3.0 drives may or may not work with airports.

  Yes, we know that USB 3.0 is supposed to be backward compatible with USB 2.0 in theory, but theory does not always work in practice.

  If your drive is formatted as Mac OS extended (journaled)... also called HFS +... .and you have tried the drive with and without a USB hub powered and the reader will not be displayed with you check using the AirPort Utility disks tab... then you have one of a number of readers who do not work with routers from the airport.

  I just checked a new LaCie USB 3.0 drive I have here. It works perfectly with a Mac, but it appears not at all when I connect it to the USB port or a powered new AirPort Extreme or new Time Capsule directly, or by using a USB hub.