Envy 17 T3MO4AV: upgrade memory

Seems difficult to upgrade the memory. Is it still possible?

It is a 17 t - s000, I have not heard before.

17 t - manual repair s000

Upgrade memory p. 36. 'Only', to remove the back cover, no withdrawal of the motherboard. Technically it is not allowed, the end user so I can't tell you 100% you will be OK, it makes in regards to warranty, but if it was me, I would not hesitate.

It has 2 slots and can take up to 16 concerts or modules of 2 x 8 gig DDR3L-1600 of the specified type.

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • Envy 15 t: upgrade memory and hard drive HP ENVY 15t

    Hi guys, I just bought the HP Envy 15 not touch t (ae100) with the following characteristics:

    -CPU & graphics: 6th generation Intel Core i7-6700HQ Quad Core processor + Intel HD Graphics 530

    -Memory: 8 GB DDR3L - 1 DIMM

    -Hard drive: 1 TB 5400 RPM hard drive

    I have a few questions about it. First of all, my laptop doesn't have a vacant unit of m2 where I can insert an SSD and if not a SATA 3 2.5-inch SSD fits instead of the hard disk without additional fixing or need support.

    Second, is there an empty memory slot to insert a 8 GB of additional ram.

    Any kind of assistance will be extremely useful and thanks in advance.

    No crack m2. From the Manual:

    Only dedicated support of storage SATA m2 (Port 0) (models with i7 processors and 4 GB memory graphics)

    So if you have Intel HD video only you do not have a slot m2.

    Here's the manual for your use:

    Repair manuals

    Yes on the memory 8 GB 2d module:

    Both not accessible/upgradable module DDR3L-1600 slots double channel memory support 16 GB of RAM in the following conƭgurations ● 16384-Mo (8192 MB × 2)

    Access to the memory and hard drive are obtained by removing the lower cover. Technically this is not allowed to the end user if security is jeopardized.

    A standard 2.5 inch SATA SSD to integrate perfectly in the original hardware for hard disk 5400 RPM. It is a highly recommended update. The 16 GB of RAM not so much, but it's one of those things "might as well" If you are determined to go there.

    Let us know if you need more information.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP ENVY Sleekbook 4-1000en: upgrading memory on ENVY 4-1000en

    Hello

    Since I have some basic computer knowledge, but I want to be sure before you go for it, I need your advice.

    I have a HP ENVY Sleekbook 4-1000en and I have recently upgraded to HDD and the OS.

    I think the upgrade of RAM have, as far as I know that you need 2 memories of the same type, so I guess I can't buy an another 4 GB right?

    Do I need 2 x 4 GB of DDR3 memory, of the same type to make it work? For example they would work very well

    http://www.corsair.com/en/vengeance-8gb-high-performance-sodimm-memory-upgrade-kit-cmsx8gx3m2a1600c9 ?

    Finally the upgrade memory requires any other configuration after plugin in? Is a format for example?

    Thanks for your time.

    Hello

    The following link shows the specifications of your computer:

    http://support.HP.com/us-en/document/c03362810

    It has 4 GB of RAM now. The question is 4 GB in a dwelling or in the two slots (2 + 2).

    b in the case of a home, you can just buy another 4GB with SAME part/characteristics of the EXISTING RAM and install in the second slot.

    (b) if in 2 slots (IE 2 + 2), then throw them both and buy 2 new sticks 4 GB each. Agin use even care.

    You don't need to format RAM. Moreover, we have only to format HDD/SSD but not RAM. And Yes, push in the two slots must be same same specs even marks to be able to get all the benefits.

    Kind regards.

  • HP ENVY Sleekbook 6-1110us: Memory Upgrade - vs 1333 MHz 1600 MHz

    Hello

    I plan to upgrade RAM my laptop 4GB to 16GB (2 x 8 GB). I went through the manual and noticed that the laptop comes with two slots for memory module:

    i. support of DDR3 - 1600 MHz single channel

    II support. DDR3 - 1333 MHz single channel (DDR3-1600 downgrade to 1333)

    I understand that memory cards should "mirror" each other in order to maintain the balance of system, they must be identical in terms of memory and performance.

    My question is this:

    Should a. I buy 2 memory cards that run at 1600 MHz? I understand the second module slot, which runs at 1333 MHz, to downgrade the two cards to this specification. Or,

    Should b. I buy 2 memory cards that run at 1333 MHz? Which would be compatible with the first slot which will at1600MHz?

    Thanks in advance for your help. Impatience on your part.

    Concerning

    Hello

    Data sheet: http://support.hp.com/us-en/product/HP-ENVY-Sleekbook-6-1100/5296036/model/5318899/document/c03506040/

    Upgrade memory requires major disassembly in your model. It will void the warranty if you break something in the process. Ask the help of local tech if you are out of warranty and are not sure how to.

    Manual: http://h10032.www1.hp.com/ctg/Manual/c03282148

    You can buy 2 sticks of exactly the same configuration, speed, possibly brand - DDR3 1600 MHz, SODIMM SDRAM PC3-12800. Unfortunately sticks will only work on single channel even if both are of the same capacity (8 GB in two slots), so no dual channel thrust intended for your model.

    You know the configuration, the speed of the stick currently installed by running this tool: http://www.cpuid.com/softwares/cpu-z.html

    The speed indicated in the application currently is the possible speed through the two slots of memory.

    Concerning

    Visruth

  • HP Envy M6-W105dx: Ram memory upgrade?

    Hello... I'm a big fan of commodity computers HP laptops and desktops... I work with a lot of graphics desinges and this laptop met my needs for the work I do... I just bought a HP Envy M6-w105dx computer windows laptop 10-64 bit with 8 GB of RAM... What is the max Ram upgrade memory? I tried a search and could not find anywhere on the sheet of HP... Please advice... Thank you..

    @LadyShadowKnigh

    Memory

    Two SODIMM - not accessible customer locations / not upgradable

    Twin DDR3L-1600 memory support

    Supports up to 16 GB of RAM in the following configurations:

    1. 16384 MB total system memory (8192 × 2)
    1. 12288 MB total system memory (8192 × 1) + (4096 × 1)
    1. 8192 MB total system memory (8192 × 1.) or (4096 x 2)
    1. Total system memory of 4096 MB (4096 × 1.) or (2048 x 2)

    The problem is that the motherboard has to be removed to upgrade.

    Your Service Guide here.

    http://support.HP.com/us-en/product/HP-envy-x360-M6-Convertible-PC-series/8499296/model/8901596/manuals

    REO

  • Envy 15-j151sa: upgrade Hp Envy 15

    Hello, I think the upgrade of my Envy 15 - j151sa AMD A10 8 GB ddr3 RAM 1 TB SSHD to its maximum.

    I think that to upgrade to SSD, so what is the maximum it can handle if even possible?

    He manipulates ddr4 RAM? If not, what is the maximum ddr3 RAM and RAM speed it can handle?

    Is it still useful to upgrade?

    Thank you very much

    Hello

    1 1 TB SSD should be ok, the vehicle currently has a slow HARD disk: 1 TB 5400 RPM SATA, upgradeing to SSD will help a lot:

    http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/5401187/model/7255485/document/c04372563/

    2 No, DDR4 RAM does not and will not, work

    4. it supports th after configuration, 1600 MHz max.

    Two customer accessible/upgradable memory module slots
    Support for dual channel DDR3L (1600 MHz)
    Support up to 16834 MB of RAM in the following configurations:
    ● 16834 MB (8192 MB × 2)
    ● 12288 MB (8192 MB + 4096 MB)
    ● 8192 MB (8192 MB × 1, 4096 MB × 2)
    ● 6144 MB (4096 + 2048 MB)
    ● 4096 MB (4096 × 2048 MB × 2, 1 MB)

    For the last question: SSD and RAM more will give new life to your machine.

    Kind regards.

  • Upgrade memory on an all in a single LX830

    I may upgrade the 4 GB provided to meet the requirements of the program. Additional memory needs to be installed in pairs? The existing 4 GB occupies a dwelling, can I mount 8 GB in another location or it will be incompatible?

    Well, mainly upgrade memory depends on the support of the chipset/CPU.

    Not quite sure what computer Toshiba LX830 do you have exactly but as far as I know the L830 all in one units would support up to 16 GB of RAM.

    A property used by a 4 GB RAM module and housing is free.
    This is why it must be able to use another additional module of 8 GB RAM.

    But of course, another module of 8 GB RAM should be compatible with the current 4 GB of RAM.
    Otherwise, you will get some compatibility issues

  • Upgrade memory on NB300-108

    Looking to upgrade the RAM to 2 GB on my NB300-108

    Have you looked at the website of Toshiba and the cost, but there seems to be a plethora of alternative sites with upgrades memory compatible when I put in the part number.

    Would like to receive experiences in the forum about alternatives etc.

    Thank you

    Hello

    The laptop supports DDR2 800 MHz SO-DIMM or PC2-5300 (DDR2 667 Mhz) modules.
    These modules are provided by different companies.
    There are good quality modules and less quality modules

    Of course, you can choose and buy the cheapest, but in this case, you use the risk of compatibility problems.

    I made good experiences with RAM from Kingston. These are of good quality and not too expensive modules

  • Upgrading memory on the NB550D - 11 d - 4 GB of RAM are possible

    To anyone who thinks of a memory upgrade on the NB550D:

    The NB550D supports up to 4 GB of memory, not only 2 GB as mentioned by Toshiba in their specifications.
    Upgrade memory to 2 GB is _only limited_ by the pre installed Windows 7 Starter OS, and not by the netbook itself.

    I use Linux Mint 11 Katya, 64-bit and my system works perfectly well with a 4 GB ram module. If you want to use the full support for 4 GB ram, get rid of the Win 7 Starter operating system.

    Specifications for more memory ram volume are DDR3 1333 MHz PC3-10600 SO-Dimm. I chose a 4 GB of Corsair module, because of the guarantee of 30 years of offers from Corsair.

    It took me a while to find this out hope, that this will be a help to all those who are just as secure as I was how to upgrade memory NB550D. Good luck. (o).

    Thanks for the comments

    Also it of important to mention than the 32-bit systems (not serious if its Linux or Windows) would recognize only 3.2 GB since it is a limitation of 32-bit
    So to use all of the 4 GB RAM 64-bit system is required.

  • Question about upgrading memory Satellite M55-S1001

    can you please recommend what to do? I want to make my satellite m55-s1001 run faster please let me know, what do you recommend: 512 MB or 1 GB of memory? I'm not familiar with updates so please help!

    Hello

    First of all, if you want to go for fastest laptop, you should start with simple things.
    Try to defragment the disk, turn off the background process is not necessary, etc.
    Upgrade memory will the powerful laptop and of course a lot more quickly.

    To my knowledge the Satellite M55 should support the bars of memory 2 x 1024MB, and I also recommend the use of 1024MB instead of 512 MB module.

  • I have iMac 5 k mid 2015 upgrading memory

    How to upgrade memory on iMac 5 k mid 2015 10.11.3 el capitan bones of 27 inches

    Installation video are visible by clicking on

    http://eShop.MacSales.com/installvideos/iMac-27-inch-5K-late-2015-memory/

  • Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

    Upgrade memory L50 - A - 1 5 pskk6e

    I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
    memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

    I tried to mount only the new but it won't start.

    Some ideas?

    I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

    But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

    I found modules recommended by Toshiba.
    These are:
    8GB DDR3L - 1600 PA5104U-1M8G
    4 GB DDR3L - 1600 PA5104U-1M4G

    Both are made of Kingston and the specifications are:

    Memory speed: 1600 Mhz PC3-12800
    Capacity: 8 GB (1x8GB module)
    Pins: 204 SODIMM
    Type of RAM: DDR3 SODIMM
    Verifying the integrity of data: non ECC
    Specifications:
    Latency (CL) CASES: 11
    Voltage: 1.35v

  • Upgrade memory for Satellite 2800 400

    I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

    Hi Ben

    Maybe you used the memory modules bad.
    As far as I know that you can upgrade memory for max 192 MB
    The 64 MB has been installed in an internal memory and cannot be deleted.

    I found these compatible modules:
    PA3003U - 1 M 03 32 MB
    PS3004U - 1 M 06 64 MB
    PS3005U - 1 M 12 128 MB

  • Upgrade memory for Equium L20-264

    Hello

    I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

    Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
    -Windows® XP Home Edition
    -60 GB hard drive
    -256 MB DDR2 RAM
    -15 "TFT color display
    -Drive DVD Super Multi (Double Layer)

    Issues related to the:

    1. How can I remove the existing memory? Is there a guide of the user on this operation?

    2 How many slots have?

    3. What is the max memory per slot?

    4. can I buy Toshiba memory directly?

    It is rather urgent and would like a quick answer.

    Thanks in advance
    Rag99

    Hi mate.

    As far as I know your laptop supports two memory locations.
    They must be placed at the bottom of the unit.
    If you n t know how to change this then I recommend consulted the user manual!
    The manual can be downloaded from the Toshiba European page.
    I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

    PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules

  • Satellite Pro 2100 - upgrade - upgrade memory RAM

    Hello together!

    For your information:

    Upgrade memory today to 2 Toshiba Satellite Pro 2100 (1.9 GH, 256 MB DDR - RAM initially), both up to 1 GB, all fine and no problems.

    Wanted to just end rumors "only 512 MB all together" or even less.

    If you are looking for, don't forget to think of the specifications:

    DDR-266 (PC2100)
    DDR-SDRAM, SO-DIMM
    200 PINS
    2.5 CL

    concerning the frequency of the RAM, building shape etc.

    Greetings

    L0nestar

    P.S.: Don't think that a debate is necessary, thread could be closed...

    According to the specifications of the computer laptop Satellite Pro has two memory slots and can be upgraded up to 1 GB. It is very useful to have confirmation on the RAM upgrade for this model of laptop old but still good.

    Good day.

Maybe you are looking for

  • try to install El Capitan

    Try to install el capitan and get message that says that the disk you selected is used by time machine. use a different drive. "I have 2 drives: cie 4 t I back up and the imac (late 2011) by car. No matter who I chose, I get the same message. both dr

  • Different boot disks

    Current have a 480 GB SSD and a 2 TB HDD installed on our end 2009 27 "iMac. What I want to do is to use the 2 TB as start player for my wife so that all its data (about 300 GB) is stored and to use the SSD 480 GB to store my data. Question 1: Is it

  • Satellite SA50-110 - IDE #1 error after the insertion of a new CD/DVD drive

    Hey there! I have a Toshiba Satellite SA50-110 portable psa50e.I have built in a new dvd driver and after I restarted my laptop I get the message IDE # 1 and I can't use the driver. I read in some forums that I probably need to update my bios. I do i

  • Satellite L500 becomes too hot - fan starts at boot only!

    My Satellite L500 overheats and stops without warning. I first thought that the fan is defect because it won't start unter SP2 of Vista, but when I reboot it works then on BIOS level. But as soon as Vista takes over during initialization the fan stop

  • Try to install PCI-GPIB on a Windows 7 System - x 64, variety of errors and problems

    I am trying to install a PCI-GPIB in my system Windows 7 after installing the version of NOR-488. 2 2.7.3.49152, I asked problems and the card itself interfacera not with any software. I tried to reinstall the driver several times without success. Pr